Simulation of dielectrophoretic assembly of carbon nanotubes using 3D finite element analysis.
Nanotechnology
; 26(15): 155602, 2015 Apr 17.
Article
em En
| MEDLINE
| ID: mdl-25804394
ABSTRACT
One of the most important methods for selective and repeatable assembly of carbon nanotubes (CNTs) is alternating current dielectrophoresis (DEP). This method has been demonstrated experimentally as a viable technique for nano-scale manufacturing of novel CNT based devices. Previous numerical analyses have studied the motion of nanotubes, the volume from which they are assembled, and the rate of assembly, but have been restricted by various simplifying assumptions. In this paper we present a method for simulating the motion and behavior of CNTs subjected to dielectrophoresis using a three-dimensional electrostatic finite element analysis. By including the CNT in the finite element model, we can accurately predict the effect of the CNT on the electric field and the resulting force distribution across the CNT can be determined. We have used this information to calculate the motion of CNTs assembling onto the electrodes, and show how they tend to move towards the center of an electrode and come into contact at highly skewed angles. Our analysis suggests that the CNTs move to the electrode gap only after initially contacting the electrodes. We have also developed a model of the elastic deformation of CNTs as they approach the electrodes demonstrating how the induced forces can significantly alter the CNT shape during assembly. These results show that the CNT does not behave as a rigid body when in close proximity to the electrodes. In the future this method can be applied to a variety of real electrode geometries on a case-by-case basis and will provide more detailed insight into the specific motion and assembly parameters necessary for effective DEP assembly.
Texto completo:
1
Coleções:
01-internacional
Base de dados:
MEDLINE
Tipo de estudo:
Prognostic_studies
Idioma:
En
Ano de publicação:
2015
Tipo de documento:
Article