Electrochemical degradation of oxalic acid over highly reactive nano-textured γ- and α-MnO2/carbon electrode fabricated by KMnO4 reduction on loofah sponge-derived active carbon.
J Hazard Mater
; 379: 120759, 2019 11 05.
Article
em En
| MEDLINE
| ID: mdl-31238219
ABSTRACT
Manganese dioxide incorporated activated carbon (MnO2/AC) was synthesized and used to electrochemically degrade oxalic acid in aqueous solutions. The highly porous carbon provided reactive sites for the electro-sorption of oxalic acid and MnO2, with a specific polymorphism efficiently mediating the electron transfer between the electrode and organic pollutants. The activated carbon, made from the pyrolysis of dry loofah sponge using ZnCl2 as activating agent, exhibited a high double-layer capacitance dependent upon the heating temperature (100â¯F/g at 800⯰C). The γ-MnO2 was in-situ deposited over the microporous structure of activated carbon through the redox reaction between KMnO4 and carbon. Simple further calcination converted γ-MnO2 to α-MnO2 nano-whisker at temperatures above 500⯰C. Cyclic voltammetry showed that oxalic acid significantly improved the anodic current of the Mn(III)/Mn(IV) redox couple on the MnO2/AC electrode at an electrode potential around + 0.6â¯V (vs. Ag/AgCl). About 95% of oxalic acid degradation was achieved at pHâ¯<â¯4; meanwhile, 80% of the mineralization (total organic carbon removal) was attained independent of pH. Calcination converted γ-MnO2 to α-MnO2 which had higher electrochemical stability and inhibited the dissolution of Mn(II) from the electrode.
Palavras-chave
Texto completo:
1
Coleções:
01-internacional
Base de dados:
MEDLINE
Assunto principal:
Óxidos
/
Permanganato de Potássio
/
Poluentes Químicos da Água
/
Carvão Vegetal
/
Compostos de Manganês
/
Purificação da Água
/
Ácido Oxálico
/
Luffa
/
Nanoestruturas
/
Técnicas Eletroquímicas
Idioma:
En
Ano de publicação:
2019
Tipo de documento:
Article