Effects of thickness of different types of high-translucency monolithic multilayer precolored zirconia on color accuracy: An in vitro study.

STATEMENT OF PROBLEM: High-translucency monolithic multilayer precolored zirconia provides acceptable esthetics and eliminates chipping of the veneering porcelain. However, the color is not always consistent with the standard Vita shade guide, and the color saturation may vary with the thickness of the zirconia. PURPOSE: The purpose of this in vitro study was to characterize the effect of thickness on the color accuracy of high-translucency monolithic multilayer precolored zirconia. MATERIAL AND METHODS: Plate-shaped (20×20 mm) Vita A2 shade high-translucency monolithic multilayer precolored zirconia specimens of 3 types (SHT Multilayer, AT Multilayer, and 3D Multilayer) in 4 thicknesses (0.5, 1.0, 1.5, and 2.0 mm) were fabricated (N=120, n=10). A spectrophotometer was used to measure the color attributes (CIELab) against gray or A2 substrates to evaluate the color accuracy based on differences in color (ΔE) (versus the Vita shade guide) and chroma. Statistical analysis was performed by using the Pearson correlation, 2-way ANOVA, and post hoc Scheffé test (α=.05). RESULTS: Against gray substrates, thickness was significantly positively correlated with all color attributes. Against A2 substrates, L∗ values increased with an increase in thickness; however, a∗, b∗, and chroma values remained stable. Zirconia with a thickness of 1.0 mm exhibited the lowest ΔE, regardless of the type, except for AT Multilayer against A2 substrates, where the lowest ΔE was achieved at 0.5 mm. At thicknesses ≥1.0 mm, the ΔE between the 2 substrates was imperceivable. CONCLUSIONS: Thickness affected the color accuracy of different high-translucency monolithic multilayer precolored zirconia types. It appears that the optimal thickness in terms of color accuracy is 1.0 mm. These results could be used as a reference for the selection and preparation of abutments in clinical applications.