Your browser doesn't support javascript.
loading
Synthesis of Porous Material from Coal Gasification Fine Slag Residual Carbon and Its Application in Removal of Methylene Blue.
Zhang, Yixin; Wang, Rumeng; Qiu, Guofeng; Jia, Wenke; Guo, Yang; Guo, Fanhui; Wu, Jianjun.
Afiliação
  • Zhang Y; National Engineering Research Center of Coal Preparation and Purification, China University of Mining and Technology, No. 1 Daxue Road, Xuzhou 221116, China.
  • Wang R; Shandong Xuanyuan Scientific Engineering and Industrial Technology Research Institute Co., Ltd., Longgu, Juye, Heze 274918, China.
  • Qiu G; School of Chemical Engineering and Technology, China University of Mining and Technology, No. 1 Daxue Road, Xuzhou 221116, China.
  • Jia W; School of Chemical Engineering and Technology, China University of Mining and Technology, No. 1 Daxue Road, Xuzhou 221116, China.
  • Guo Y; School of Chemical Engineering and Technology, China University of Mining and Technology, No. 1 Daxue Road, Xuzhou 221116, China.
  • Guo F; School of Chemical Engineering and Technology, China University of Mining and Technology, No. 1 Daxue Road, Xuzhou 221116, China.
  • Wu J; School of Chemical Engineering and Technology, China University of Mining and Technology, No. 1 Daxue Road, Xuzhou 221116, China.
Molecules ; 26(20)2021 Oct 10.
Article em En | MEDLINE | ID: mdl-34684697
ABSTRACT
A large amount of coal gasification slag is produced every year in China. However, most of the current disposal is into landfills, which causes serious harm to the environment. In this research, coal gasification fine slag residual carbon porous material (GFSA) was prepared using gasification fine slag foam flotation obtained carbon residue (GFSF) as raw material and an adsorbent to carry out an adsorption test on waste liquid containing methylene blue (MB). The effects of activation parameters (GFSF/KOH ratio mass ratio, activation temperature, and activation time) on the cation exchange capacity (CEC) of GFSA were investigated. The total specific surface area and pore volume of GSFA with the highest CEC were 574.02 m2/g and 0.467 cm3/g, respectively. The degree of pore formation had an important effect on CEC. The maximum adsorption capacity of GFSA on MB was 19.18 mg/g in the MB adsorption test. The effects of pH, adsorption time, amount of adsorbent, and initial MB concentration on adsorption efficiency were studied. Langmuir isotherm and quasi second-order kinetic model have a good fitting effect on the adsorption isotherm and kinetic model of MB.
Palavras-chave

Texto completo: 1 Coleções: 01-internacional Base de dados: MEDLINE Idioma: En Ano de publicação: 2021 Tipo de documento: Article

Texto completo: 1 Coleções: 01-internacional Base de dados: MEDLINE Idioma: En Ano de publicação: 2021 Tipo de documento: Article