Compact 3D Metal Collectors Enabled by Roll-to-Roll Nanoimprinting for Improving Capacitive Energy Storage.
Small Methods
; 6(4): e2101539, 2022 Apr.
Article
em En
| MEDLINE
| ID: mdl-35107222
ABSTRACT
Reducing the contact resistance between active materials and current collectors is of engineering importance for improving capacitive energy storage. 3D current collectors have shown extraordinary promise for reducing the contact resistance, however, there is a major obstacle of being bulky or inefficient fabrication before they become viable in practice. Here a roll-to-roll nanoimprinting method is demonstrated to deform flat aluminum foils into 3D current collectors with hierarchical microstructures by combining soft matter-enhanced plastic deformation and template-confined local surface nanocracks. The generated 3D current collectors are inserted by and interlocked with active electrode materials such as activated carbon, decreasing the contact resistance by at least one order of magnitude and quadrupling the specific capacitance at high current density of 30 A g-1 for commercial-level mass loading of 5 mg cm-2 . The 3D current collectors are so compact that they have a low volume percentage of 7.8% in the entire electrode film, resulting in energy and power density of 29.1 Wh L-1 and 12.8 kW L-1 , respectively, for stack cells in organic electrolyte. Furthermore, roll-to-roll nanoimprinting of metal microstructures is low-cost, high-throughput, and can be extended to other systems that involve the microstructured metal interface, such as batteries and thermal management.
Texto completo:
1
Coleções:
01-internacional
Base de dados:
MEDLINE
Idioma:
En
Ano de publicação:
2022
Tipo de documento:
Article