In Situ Observation of the Movement of Magnetic Particles in Polyurethane Elastomer Densely Packed Magnetic Particles Using Synchrotron Radiation X-ray Computed Tomography.

In situ observation of the migration and structure formation of magnetic particles in polyurethane elastomers was carried out by X-ray computed tomography using synchrotron radiation. The mean diameter of the magnetic particles was 7.0 µm, and the volume fraction was ϕ= 0.24 at its maximum. The exposure time was 100 ms/frame, and the pixel size was 0.458 µm/pixel. The orientation angle and the volume fraction of the maximum aggregate were analyzed using commercial software for image analysis. The orientation angle for magnetic elastomers with ϕ = 0.24 was approximately 55° at 0 mT and decreased remarkably with the magnetic field. At magnetic fields above 150 mT, the orientation angle gradually decreased with the field and showed a constant value of 38° at 300 mT, suggesting that magnetic particles move and form a chain-like structure although the chains do not align perfectly in the direction of the magnetic field. On the other hand, the volume fraction of the maximum aggregate was constant at magnetic fields below 100 mT, and it significantly increased with the field, indicating that magnetic particles were connected to each other and developed into a macroscopic structure with anisotropy. Dynamic viscoelastic measurements revealed that the storage modulus of the magnetic elastomers cannot be simply scaled by the orientation angle. It was also found that the volume fraction of the maximum aggregate is a good parameter for explaining the huge increase in the storage modulus. The dynamic movement of magnetic particles when a magnetic field of 300 mT was switched on and off was also successfully observed. When the field was switched on, magnetic particles connected instantly and their aggregates were rapidly elongated in the direction of the magnetic field. When the field was switched off, some of the connections between aggregates were broken; however, most of the aggregates did not return to the original position even 5 min after being switched off.