Life cycle energy use and greenhouse gas emissions for a novel algal-osmosis membrane system versus conventional advanced potable water reuse processes: Part I.

ABSTRACT

This study applied a life cycle assessment (LCA) methodology for a comparative environmental analysis between an innovative algae resource recovery and near zero-liquid discharge potable reuse system (i.e., the main system) versus a conventional potable reuse system (i.e., the benchmark system) through energy use and greenhouse gas (GHG) emissions. The objective of this study is to demonstrate that pilot-scale data coupled with LCA would provide valuable information for system optimization, integration, and improvements for the design of environmentally sustainable full-scale systems. This study also provides decision-makers valuable information regarding the energy demand and environmental impact of this innovative main system compared to a typical tried-and-true system for potable water reuse. The main system consists of a novel algal-based wastewater treatment coupled with a dual forward osmosis and seawater reverse osmosis (Algal FO-SWRO) membranes system for potable water recovery and hydrothermal liquefaction (HTL) to recover biofuels and valuable nutrients from the harvested algal biomass. The benchmark system refers to the current industry standard technologies for potable water reuse and waste management including a secondary biological treatment, microfiltration (MF), brackish water reverse osmosis (BWRO), ultraviolet/advanced oxidation process (UV-AOP), and granular activated carbon (GAC), as well as anaerobic digestion for sludge treatment. Respective energy and GHG emissions of both systems were normalized and compared considering 1 m3 of water recovered. Based on an overall water recovery of 76% designed for the benchmark system, the energy consumption totaled 4.83 kWh/m3, and the system was estimated to generate 2.42 kg of CO2 equivalent/m3 with most of the emissions coming from the biological treatment. The main system, based on an overall water recovery of 88%, was estimated to consume 4.76 kWh/m3 and emit 1.49 kg of CO2 eq/m3. The main system has high environmental resilience and can recover bioenergy and nutrients from wastewater with zero waste disposal. With the application of energy recovery devices for the HTL and the SWRO, increase in water recovery of the FO membrane, and replacement of the SWRO membrane with BWRO, the main system provides an energy-competitive and environmentally positive alternative with an energy demand of 2.57 kWh/m3 and low GHG emissions of 0.94 kg CO2 eq/m3.