Quantitative analysis of low content polymorphic impurities in canagliflozin tablets by PXRD, NIR, ATR-FITR and Raman solid-state analysis techniques combined with stoichiometry.

Canagliflozin (CFZ) was a commercially new class of anti-diabetic drug, which had various anhydrate crystal forms and two hydrate crystal forms (Canagliflozin hemihydrate (Hemi-CFZ) and Canagliflozin monohydrate (Mono-CFZ) crystal form). Commercially available CFZ tablets' active pharmaceutical ingredient (API) was Hemi-CFZ, which was easy conversion to CFZ or Mono-CFZ under the influence of temperature, pressure, humidity and other factors in tablets processing, storage, and transportation, thus affected bioavailability and efficacy of tablets. Therefore, quantitative analysis low content of CFZ and Mono-CFZ in tablets was essential to control tablets' quality. The main objective of this study was to examine the feasibility of Powder X-ray Diffraction (PXRD), Near Infrared Spectroscopy (NIR), Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) and Raman for quantitative analysis the low content of CFZ or Mono-CFZ in ternary mixtures. PLSR calibration models for low content of CFZ and Mono-CFZ were established by the solid analysis techniques of PXRD, NIR, ATR-FTIR and Raman combined with various pretreatments (such as Multiplicative Scatter Correction (MSC), Standard Normal Variate (SNV), Savitzky-Golay First Derivative (SG1st), Savitzky-Golay Second Derivative (SG2nd) and Wavelet Transform (WT)), and the correction models were verified. However, compared with PXRD, ATR-FTIR and Raman, NIR due to its water sensitivity was the most suitable for the quantitative analysis low content of CFZ or Mono-CFZ in tablets. Partial Least Squares Regression (PLSR) model for quantitative analysis low content of CFZ in tablets was as follow: Y = 0.0480 + 0.9928 X, R2 = 0.9986, LOD = 0.1596 %, LOQ = 0.4838 %, SG1st + WT pretreated. And that of Mono-CFZ were Y = 0.0050 + 0.9996 X, R2 = 0.9996, LOD = 0.0164 %, LOQ = 0.0498 %, MSC + WT pretreated and Y = 0.0051 + 0.9996 X, R2 = 0.9996, LOD = 0.0167 %, LOQ = 0.0505 %, SNV + WT pretreated, respectively. That can be used for quantitative analysis of impurity crystal content in drug production to ensure drug quality.