Effect of reservoir characteristics and chemicals on filtration property of water-based drilling fluid in unconventional reservoir and mechanism disclosure.

ABSTRACT

The research objective of this investigation is to explore the influence of filtrate reducer and reservoir characteristics on the filtration reduction of drilling fluid during the drilling process, and the filtration reduction mechanism of drilling fluids is also revealed. The results obtained that a synthetic filtrate reducer can significantly reduce the filtration coefficient than that of the commercial filtrate reducer. Moreover, the filtration coefficient of drilling fluid constructed from synthetic filtrate reducer is reduced from 4.9 × 10-2 m3·min1/2 to 2.4 × 10-2 m3·min1/2 with an increase in the filtrate reducer content, which is much lower than that of the commercial filtrate reducer. The weaker filtration capacity of the drilling fluid containing the modified filtrate reducer is attributed to the combined action of the filtrate reducer containing multifunctional groups adsorbed on the sand surface and the hydration membrane adsorbed on the sand surface. Furthermore, the increase in reservoir temperature and shear rate increases the filtration coefficient of drilling fluid, indicating that low temperature and shear rate are conducive to improve the filtration capacity. Thus, the type and content of filtrate reducer are preferred during drilling in oilfield reservoir, but increasing reservoir temperature and shear rate are not recommended. It is necessary to confect the drilling mud with appropriate filtrate reducer such as the chemicals prepared herein during drilling operation.