Evaluation of asphalt film thickness and heavy metal leaching of oxidizing slag used as an aggregate material in dense-graded asphalt concrete.

ABSTRACT

Electric-arc-furnace (EAF) steelmaking uses scrap iron and steel as raw materials. Scrap iron and steel originate from complex sources and may contain heavy metal components which can leach into the environment over time due to wear-and-tear. A by-product of the EAF steelmaking process is oxidizing slag, and approximately 1.2 million metric tons is produced every year in Taiwan alone. This study investigated substitution of natural aggregates with oxidizing slag in dense-graded asphalt concrete. We evaluated the water resistance and asphalt film thickness of the oxidizing slag substituted asphalt concrete and further explored the performance of oxidizing slag as paving material. We determined the dissolved and total amounts of heavy metals in the oxidizing slag, comparing these results with current regulatory controls to assess the environmental compatibility of the oxidizing slag. We found that due to the complicated sources of oxidizing slag, the basic properties should be analyzed on a batch-to-batch basis. Furthermore, we recommend trial mixing before upscaling the production of oxidizing slag substituted dense-graded asphalt concrete to confirm the mixing time required to achieve uniformity. The results also show that in comparison to natural aggregates used in asphalt concrete, oxidizing slag exhibits superior performance in terms of increased asphalt film thickness and improved water resistance. Furthermore, oxidizing slag as an aggregate material was associated with decreased heavy metal leaching and reduced environmental pollution. The results of the toxicity characteristic leaching procedure (TCLP) met regulatory requirements. However, the microwave-assisted aqua-regia digestion procedure showed heavy metal concentrations exceeding the monitoring standards for food crops. Considering environmental compatibility, it is recommended that controlling the total amount of heavy metals in oxidizing slag should be included in regulatory requirements. Furthermore, we should prohibit the use of materials such as oxidizing slag and other steel furnace slag in the roadways adjacent to edible crop farmlands.