Single-frequency DBR lasing by integrating FBGs into germanium-free photosensitive highly Yb3+-doped silica fibers.

ABSTRACT

Monolithic distributed Bragg reflector (DBR) cavity which directly integrates fiber Bragg gratings (FBGs) into the photosensitive RE-doped fibers is a promising configuration in constructing compact and efficient single frequency fiber lasers (SFFLs). Yet, the doping level of rare-earth (RE) ions has generally to be sacrificed in the classical Ge-photosensitized RE-doped silica fibers because of the dramatic refractive index increase caused by the introduction of Ge. Here, we demonstrate an approach to realize the trade-off between photosensitivity and RE doping concentration. We validate that the addition of a small amount of cerium (0.37wt.%) instead of Ge could photosensitize Yb3+-doped silica fiber (YDF), while maintaining fiber numerical aperture (NA) at 0.12 under a high 2.5-wt.% Yb doping level. Based on the short monolithic DBR cavity constructed by this germanium-free photosensitive highly YDF, a 1064 nm fiber laser with a 48.6% slope efficiency and an over 200 mW power on two orthogonally polarized modes could be realized. Further stable and linear-polarized 1064 nm SFFL is also demonstrated in a designed monolithic polarization maintaining cavity with an output power of 119 mW and an efficiency of 26.4%. Our results provide an alternative way to develop photosensitive highly RE-doped fibers towards monolithic laser cavity application.