Characterizing ammonia emission from light-duty gasoline vehicles under the influence of multiple factors and its correlation with conventional pollutants.

ABSTRACT

Ammonia (NH3), which is a precursor of secondary particulate matter (PM), can be produced through three-way catalyst (TWC) side reactions in light-duty gasoline vehicles (LDGVs), posing a threat to human health and air quality. To explore ammonia emission characteristics, 8 LDGVs and 1 hybrid electric light-duty vehicle (HEV) with various mileages traveled were analyzed with a chassis dynamometer system during regulation driving cycles. The emission factors of the adopted China VI in-use LDGVs were 7.04 ± 2.61 mg/km under cold-start conditions and 4.94 ± 1.69 mg/km under hot-start conditions. With increasing mileage traveled, the total ammonia emissions increased, and the difference between the cold/hot-start results decreased. The emissions of in-use LDGVs with bi-fuel engines were analyzed, and more ammonia was generated in the compressed natural gas (CNG) mode through the hydrocarbon (HC) reforming reaction. The relationship between the emissions of ammonia and conventional pollutants was established. During the initial cold-start phase, a delay in ammonia formation was observed, and the ammonia emissions conformed with the CO and HC emissions after exhaust heating. Vehicle specific power (VSP) analysis revealed that the interval of highest ammonia emissions corresponded to acceleration events at high speeds. For the HEV, the transition from motor to engine drive conditions contributed to ammonia emission occurrence because of the more pronounced cold-start events. The use of HEV technology could introduce additional uncertainties in controlling urban ammonia emissions. Detailed analysis of emission characteristics could provide data support for future research on ammonia emission standards and control strategies for LDGVs.