Rapid Fabrication of Tungsten Oxide-Based Electrochromic Devices through Femtosecond Laser Processing.

ABSTRACT

The sol-gel method is a widely adopted technique for the preparation of tungsten trioxide (WO3) materials, favored for its cost-effectiveness and straightforward production procedures. However, this method encounters challenges such as prolonged annealing periods and limited flexibility in fabricating patterned WO3 films. This study introduces a novel approach that integrates femtosecond laser processing with the sol-gel method to enhance the fabrication of WO3 films. By adjusting polyvinylpyrrolidone (PVP) concentrations during sol-gel synthesis, precise control over film thickness and optimized film properties were achieved. The innovative technique significantly reduced the annealing time required to achieve an 80% transmittance rate from 90 min to 40 min, marking a 56% decrease. Laser processing increased the surface roughness of the films from Sa = 0.032 to Sa = 0.119, facilitating enhanced volatilization of organics during heat treatment. Additionally, this method improved the transmittance modulation of the films by 22% at 550 nm compared to unprocessed counterparts. This approach not only simplifies the manufacturing process but also enhances the optical efficiency of electrochromic devices, potentially leading to broader applications and more effective energy conservation strategies.