Study on unseating prevention for multi-union long simply supported girder bridges under near-fault ground motions.

ABSTRACT

Girder shifting is a common form of seismic damage for girder bridges. Unseating could occur when the displacement of the girder is too large, especially for bridges near faults, because the velocity impulse effect leads to greater displacement responses of structures. Setting metal dampers between girders and piers is a useful way to control the seismic behavior and reduce the risk of unseating. Since metal dampers are inevitably exposed to the erosive service environments, their mechanical properties may degrade due to corrosion. In this paper, a U-shaped metal damper made of stainless steel instead of mild steel (i.e., U-shaped stainless steel damper, which could be named simply as USSSD) is proposed and applied to the seismic reduction design of girder bridges. First, the finite element model (FEM) of the USSSD is built by the ABAQUS, and its force-displacement relationship is obtained based on the skeleton curve, which is fitted by the trilinear kinematic strengthening model. Then, a multi-union long simply supported girder bridge is taken as an example. The FEM of the adopted bridge is established via the Midas Civil to verify the seismic mitigation effect of the proposed USSSD excited by near-fault ground motions. The numerical analyses demonstrate that the unseating may occur without the use of the USSSDs. The relative displacement between the girder and pier is effectively controlled by the USSSDs, and the reduction is more than 50 %. When the bridge is equipped with the USSSDs, both the curvature ductility coefficient of the pier bottom and the maximum drift of the pier tip increase by a limited amplitude, which do not cause additional damage to the piers.