Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Mais filtros










Filtros aplicados
Intervalo de ano de publicação
1.
Braz. dent. sci ; 25(2): 1-8, 2022. tab, ilus
Artigo em Inglês | LILACS, BBO - Odontologia | ID: biblio-1369986

RESUMO

Objective: To evaluate color and surface gloss stability of bis-acryl resins and resin composites, submitted to artificial staining with cigarette smoke. Material and Methods: Specimens of each material were prepared (n=15). Two resin composites (GrandioSO [RCG], Filtek Supreme [RCZ]) and five bis-acryl resins (Luxatemp Star [BisLUX], Protemp4 [BisPRO], Structor3 [BisSTR], Visalys Temp [BisVIS] and Yprov [BisYPR]) were tested. Initial color was assessed using a spectrophotometer and surface gloss with a glossmeter. Samples were submitted to smoke exposure (10 cigarettes under 8 minutes per cycle). After 3 and 6 cycles, color and gloss were reassessed. Final readings were performed after brush prophylaxis. Data were analyzed using two-way repeated ANOVA and Tukey's test (p<0.05). Results: Differences and interaction of factors (p<0.01) were detected for both color and gloss readings. Resin composites were the least affected by aging, with gloss reduction after prophylaxis. Differences were detected among bis-acryl resins, with better results for BisLUX and BisPRO. BisPRO and BisSTR, showed reduction in gloss after 60 cigarettes, while BisYPR gloss decreased at all evaluated periods. Conclusion: Resin composites are less susceptible to changes after smoke exposure, while bis-acryl resins results are brand-dependent. Prophylaxis negatively influenced the surface gloss of most of the tested materials (AU)


Objetivo: Avaliar a estabilidade de cor e brilho superficial de resinas compostas e bisacrílicas, submetidos ao manchamento artificial por fumaça de cigarro. Material e Métodos: Foram preparados espécimes de cada material (n=15). Duas resinas compostas (GrandioSO [RCG], Filtek Supreme [RCZ]) e cinco resinas bisacrílicas (Luxatemp Star [BisLUX], Protemp4 [BisPRO], Structor3 [BisSTR], Visalys Temp [BisVIS] e Yprov [BisYPR]) foram testados. A cor inicial foi avaliada usando um espectrofotômetro e o brilho de superfície com um medidor de brilho. As amostras foram submetidas à exposição de fumaça de cigarro (10 cigarros com até 8 minutos por ciclo). Após 3 e 6 ciclos, a cor e o brilho foram reavaliados. As leituras finais foram realizadas após a profilaxia escova de robinson. Os dados foram analisados usando de medidas repetidas e teste de Tukey (p<0,05). Resultados: Foram detectadas diferenças e interação de fatores (p<0,01) tanto para leituras de cor quanto para leituras de brilho. As resinas compostas foram as menos afetados pelo envelhecimento, com redução do brilho após a profilaxia. Foram detectadas diferenças entre as resinas bisacrílicas, com melhores resultados para BisLUX e BisPRO. BisPRO e BisSTR, mostraram redução de brilho após 60 cigarros, enquanto que o brilho da BisYPR diminuiu em todos os períodos avaliados. Conclusão: As resinas compostas são as menos suscetíveis a mudanças após a exposição à fumaça, enquanto os resultados das resinas bisacrílicas são dependentes da marca. A profilaxia influenciou negativamente o brilho de superfície da maioria dos materiais testados.(AU)


Assuntos
Fumaça , Cor , Resinas Compostas , Restauração Dentária Temporária
2.
Rev. Cient. CRO-RJ (Online) ; 5(2): 50-55, May-Aug. 2020.
Artigo em Inglês | BBO - Odontologia, LILACS | ID: biblio-1253996

RESUMO

Objective: The aim of this study was to evaluate the color stability of dental enamel exposed to cigarette smoke after orthodontic debonding. Methods: Thirty-two bovine incisors were allocated into control (C1 and C2) and experimental groups (n=8) according to distinct bonding protocols: with adhesive (B1) and without adhesive (B2) and exposure to cigarette smoke. Samples from B1, B2 and C2 were exposed to ten cycles of smoke in a specific and hermetic chamber while the C1 remained stored in artificial saliva. Color analysis was performed with a spectrophotometer according to the L*a*b* system. Intergroup comparisons and effect of time were estimated with ANOVA/Tukey and paired Student t tests, respectively (a=0.05). Results: Statistically significant color changes have not been observed in C1 (L*: -0.69 ± 0.80; a*: 0.36 ± 0.23; b*: 0.17 ± 0.50) and without adhesive (B2) (L*: -3.74 ± 2.85; a*: 0.93 ± 0,73; b*: 1.13 ± 1.16) through the study time (p>0,05). However, the group with adhesive (B1) presented significant color changes in L*:-5.55 ± 2.28, a*: 2.33 ± 0.77 and b*: 3.30 ± 1.37, what means, darker, greener and more yellow, respectively (p<0,05) and the control group that was exposed to the cigarette smoke (C2) presented significant color changes in L*: -1.72 ± 0.28 e b*: 1.82 ± 0.22, what means, darker and more yellow, respectively. Conclusion: Enamel color stability was affected by exposure to cigarette smoke after orthodontic debonding, especially when bonding protocolcomprised the application of primer adhesive.


Objetivo: O objetivo deste estudo foi avaliar a estabilidade da cor do esmalte dentário exposto à fumaça de cigarro após a descolagem ortodôntica. Métodos: Trinta e dois incisivos bovinos foram alocados nos grupos controle (C1 and C2) e experimental (n = 8) de acordo com protocolos de colagem ortodôntica distintos: com adesivo (B1) e sem adesivo (B2) e expostos à fumaça de cigarro. Amostras do B1, B2 e C2 foram expostas a dez ciclos de fumaça em uma câmara específica e hermética, enquanto o C1 permaneceu armazenado em saliva artificial. A análise da estabilidade de cor foi realizada com um espectrofotômetro de acordo com osistema L* a* b*. As comparações intergrupos e o efeito do tempo foram verificados com ANOVA / Tukey e testes t de Student, respectivamente (a=0,05). Resultados: Não foram observadas alterações de cor estatisticamente significativas no C1 (L*: -0,69 ± 0,80; a*: 0,36 ± 0,23; b*: 0,17 ± 0.50) e sem adesivo (B2) (L*: -3,74 ± 2,85; a*: 0,93 ± 0,73; b *: 1,13 ± 1,16) durante o tempo de estudo (p>0,05). No entanto, o grupo com adesivo (B1) apresentou alterações significativas de cor em L*: - 5,55 ± 2,28, a*: 2,33 ± 0,77 eb*: 3,30 ± 1,37, o que significa, mais escuro, mais verde e mais amarelo, respectivamente (p<0,05) e o grupo controle exposto à fumaça de cigarro (C2) apresentou alterações significativas de cor em L*: -1,72 ± 0,28 e b*: 1, 82 ± 0,22, o que significa, mais escuro e mais amarelo, respectivamente. Conclusão: A estabilidade da cor do esmalte foi afetada pela exposição à fumaça de cigarro após a descolagem ortodôntica, principalmente quando o protocolo de colagem incluía a aplicação de adesivo.


Assuntos
Ortodontia , Fumaça , Descolagem Dentária , Cor , Esmalte Dentário , Produtos do Tabaco
3.
Braz. j. oral sci ; 17: e18021, 2018. tab
Artigo em Inglês | LILACS, BBO - Odontologia | ID: biblio-906089

RESUMO

AIM: The aim of this study was to evaluate the surface roughness and the color stability of nanocomposite exposed to the sodium bicarbonate air-polishing (SBAP) followed by red wine, coffee and cigarette smoke exposure. MATERIALS AND METHODS: 64 nanocomposite specimens were prepared and allocated in 8 groups: G1 (SBAP + distilled water), G2 (SBAP + coffee), G3 (SBAP + red wine), G4 (SBAP + cigarette smoke), G5 (distilled water), G6 (coffee), G7 (red wine) and G8 (cigarette smoke). The surface roughness was evaluated in three periods: before and after SBAP and after exposuring to agents tested. The color was evaluated according to CIEL*a*b* parameters using reflection spectrophotometer in two moments: initial and 30 days after the exposure to staining agents. Data were subjected to three-way repeated measures ANOVA and Tukey's test (5%). RESULTS: The results showed a higher surface roughness of the nanocomposite submitted only to the SBAP and those exposed to the SBAP followed by exposure to the coffee or wine solution. The previous application of SBAP followed by cigarette smoke exposure did not increase the roughness of nanocomposite. The SBAP procedure just increased the staining for cigarette smoke group. CONCLUSION: The SBAP increases resin surface roughness, which worsens when there is exposure to coffee and red wine solution. In addition, SBAP may also provide increased staining of nanocomposites exposed to cigarette smoke


Assuntos
Bebidas , Resinas Compostas , Materiais Dentários , Fumaça , Bicarbonato de Sódio
4.
Rev. Esc. Farm. Odontol. Alfenas ; (12): 73-81, jan.-dez. 1990. ilus
Artigo em Português | LILACS, BBO - Odontologia | ID: biblio-856314

RESUMO

Um grupo de cinco ratos adultos foi colocado numa sala pequena e fechada onde permaneceu durante 60 dias. Nos dias úteis, queimaram-se cigarros num cinzeiro sob a gaiola. Um grupo controle foi colocado numa sala ampla e arejada. Métodos histológicos e histoquímicos revelaram que os ratos tratados com fumaça de cigarros apresentavam áreas de destruição pulmonar e acentuado aumento do número de células mucosas e de secreção de muco


Assuntos
Animais , Masculino , Ratos , Fumaça/efeitos adversos , Pulmão/patologia , Tabaco/efeitos adversos
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...