Morphometric and aesthetic analysis of people following application of platelet rich plasma for neck rejuvenation / Análisis morfométrico y estético de personas tras la aplicación de plasma rico en plaquetas para el rejuvenecimiento del cuello

SUMMARY: Several studies have shown beneficial effects of platelet-rich plasma. However, there are very few studies investigating the effectiveness of PRP in the neck region. We aimed to assess the efficacy of PRP injection for neck rejuvenation in females aged 40-55. Fifty-two female consecutive participants had PRP injected and roller applied in three sessions at 3-week intervals. Evaluations were blindly performed by comparing the improvements from the pre- to post-application assessments of anatomical measurements of the neck area based on before and after photography of the participants by two anatomists and three medical aesthetic doctors. The Fitzpatrick Skin Scale, Fitzpatrick Goldman Scale, Wrinkle Assessment Scale (Dedo classification system) and patient satisfaction scale were used for assessment. Additionally, skin stiffness and elasticity, cervicomental angle and jawline angle measurements were performed to analyze anatomical changes in the neck area. The study enrolled 52 volunteers with a mean age of 48.60±5.35 years, mean body weight of 63.21±8.43 kg and mean height of 163.25±4.56 cm. Significant differences were found in the elasticity, jawline angle, cervicomental angle, wrinkling, elasticity G and patient satisfaction scores before and after the treatment. When the results of anatomical parameters and scales are compared, it was revealed that PRP is effective in neck rejuvenation.

RESUMEN: Varios investigaciones han demostrado los efectos beneficiosos del plasma rico en plaquetas. Sin embargo, existen muy pocos estudios que investiguen la efectividad del PRP en la región del cuello. Nuestro objetivo fue evaluar la eficacia de la inyección de PRP para el rejuvenecimiento del cuello en mujeres de 40 a 55 años. A cincuenta y dos mujeres participantes consecutivas se les inyectó PRP y se les aplicó rodillo en tres sesiones a intervalos de 3 semanas. Las evaluaciones se realizaron a ciegas comparando las mejoras de las evaluaciones previas y posteriores a la aplicación de las medidas anatómicas del área del cuello basadas en fotografías de antes y después de los participantes realizadas por dos anatomistas y tres médicos especialistas en cirugía estética. Para la evaluación se utilizaron la escala de piel de Fitzpatrick, la escala de Fitzpatrick Goldman, la escala de evaluación de arrugas (sistema de clasificación Dedo) y la escala de satisfacción del paciente. Además, se realizaron mediciones de rigidez y elasticidad de la piel, ángulo cervicomentoniano y ángulo de la línea de la mandíbula, para analizar los cambios anatómicos en el área del cuello. El estudio inscribió a 52 voluntarios con una edad media de 48,60±5,35 años, un peso corporal medio de 63,21±8,43 kg y una altura media de 163,25±4,56 cm. Se encontraron diferencias significativas en las puntuaciones de elasticidad, ángulo mandibular, ángulo cervicomentoniano, arrugas, elasticidad G y satisfacción del paciente antes y después del tratamiento. Cuando se compararon los resultados de los parámetros anatómicos y las escalas, se reveló que el PRP es eficaz en el rejuvenecimiento del cuello.

Corneal biomechanics and glaucoma beyond the bidirectional impact of intraocular pressure and corneal deformation response / Biomecânica corneana e glaucoma além do impacto bididirecional da pressão intraocular e da resposta da deformação corneana

ABSTRACT The purpose of this study was to highlight the impact of biomechanical corneal response in available in vivo tonometry methods for glaucoma management. Systematic review of non-contact air-puff tonometers that analyzes the corneal deformation response, with special focus on the investigation of the correlation of derived parameters with intraocular pressure measurements. The two actual and commercially available in vivo corneal tonometers provide promising information about biomechanical characteristics of the cornea and its relation to glaucoma, allowing the development of new protocols to evaluate, diagnose, and manage this disease.

RESUMO O objetivo deste estudo é destacar o impacto da resposta biomecânica corneana em métodos de tonometria in vivo disponíveis para o manejo do glaucoma. Trata-se de revisão sistemática de tonômetros de ar que analisa a resposta à deformação corneana, com foco especial na investigação da correlação dos parâmetros derivados com as medições da pressão intraocular. Os dois tonômetros mais recentes e comercialmente disponíveis fornecem informações promissoras sobre as características biomecânicas da córnea e sua relação com o glaucoma, permitindo o desenvolvimento de novos protocolos para avaliar, diagnosticar e controlar a doença.

Force degradation of elastomeric chains after storage time and mechanical brushing

Abstract The purpose of this in vitro study was to evaluate the force decrease of different elastomeric chains after different times: initial, 10 minutes, 1 day, 28 days and after mechanical brushing. Twenty orthodontic elastomeric chains segments were utilized for each commercial brand. Initially, the elastomeric chain of 15mm long were immediate stretched up to 20 mm in an Instron and the force was measured in gf. After all specimens were placed stretched on rectangular acrylic jigs with distance of 20 mm, immersed in deionized water at 37oC for 10 minutes and the force (gf) was measured again. Five test measurements of remaining force were made at the following time intervals: initial, 10 minutes, 1 day, 28 days and mechanical brushing. After 28 days, the acrylic plates with the specimens were adapted in the mechanical brushing machines (MSCT 3) and the elastomeric chains were submitted to mechanical brushing and the force (gf) measure again. The force (gf) was submitted to mixed-model ANOVA and Sidak post-hoc test (α=0.05). A statistically significant reduction in the force was found for all orthodontic elastomeric chain types after 1 day, 28 days and mechanical brushing (p<0.05). Morelli and 3M Unitek elastomeric chains showed significantly higher force than Abzil and GAC (p<0.05) after 1 day, 28 days and mechanical brushing. In conclusion, the force delivered by all elastomeric chains decayed rapidly over time. Morelli and 3M Unitek elastomeric chains consistently had a significantly greater force after mechanic brushing, while GAC the lowest.

Resumo O objetivo deste estudo in vitro foi avaliar a redução da força de diferentes cadeias elastoméricas após diferentes tempos: inicial, 10 minutos, 1 dia, 28 dias e após escovação mecânica. Vinte segmentos de cadeias elastoméricas ortodônticas foram utilizadas para cada marca comercial. Inicialmente, a cadeia elastomérica de 15 mm de comprimento foi esticada imediatamente até 20 mm na Instron e a força foi medida em (gf). Após, todas as amostras foram adaptadas esticadas em placas retangulares de acrílico na distância de 20 mm, imersas em água deionizada a 37o C por 10 minutos e a força (gf) foi medida novamente. Cinco medidas de força foram feitas nos seguintes intervalos de tempo: inicial, 10 minutos, 1 dia, 28 dias e após a escovação mecânica. Após 28 dias, as placas de acrílico com as amostras foram adaptadas na máquina de escovação (MSCT 3) e as cadeias elastoméricas foram submetidas a escovação mecânica e a medida de força (gf) novamente. Os dados da força (gf) foram submetidos a ANOVA modelo misto e teste post-hoc de Sidak (α = 0,05). Uma redução estatisticamente significativa na força foi encontrada para todos os tipos de cadeia elastomérica ortodôntica após 1 dia, 28 dias e escovação mecânica (p<0,05). As cadeias elastoméricas Morelli e 3M Unitek apresentaram força significativamente superior em relação a Abzil e GAC (p<0,05) após 1 dia, 28 dias e escovação mecânica. Em conclusão, a força distribuída por todas as cadeias elastoméricas decaiu rapidamente com o tempo. As cadeias elastoméricas Morelli e 3M Unitek consistentemente tiveram uma força significativamente maior após a escovação mecânica, enquanto GAC a mais baixa.

Efeito da mobilização neural no tratamento da dor em indivíduos com cervicobraquialgia: uma revisão sistemática / Effect of neural mobilization on the treatment of pain in individuals with cervicobrachialgia: a systematic review

: A cervicobraquialgia (CB) é caracterizada por uma dor com origem em diferentes níveis estruturais da coluna cervical baixa (C3- C7), com irradiação bilateral ou unilateral para o membro superior. Considerando as causas e consequências advindas da CB, novas modalidades de tratamento têm sido propostas na tentativa de promover intervenções efetivas. Entre os procedimentos fisioterapêuticos encontram-se as técnicas de terapia manual como liberação miofascial, quiropraxia, mobilização articular, estabilização segmentar e a mobilização neural (MN) que procura restabelecer a função do tecido neural, sua condução elétrica, elasticidade, movimento e fluxo axoplasmático. Sendo assim, o objetivo do estudo foi avaliar sistematicamente as evidências sobre o efeito da MN no tratamento da dor em indivíduos com CB. A busca bibliográfica foi realizada no período entre Novembro de 2018 a Junho de 2019, sem limite de ano de publicação, nas bases de dados: PEDro, PubMed, Biblioteca Virtual em Saúde (Lilacs, Scielo e Medline) e Cochrane Library. A análise foi restrita aos ensaios clínicos randomizados. Para a análise etodológica dos artigos aptos a inclusão, foi utilizada a escala PEDro. Foi encontrado um total de 38 artigos. Após remoção de duplicatas, 14 artigos foram elegidos por resumo, 8 artigos foram recuperados para leitura completa e analisados quanto a sua adequação, dos quais 3 foram excluídos por não cumprirem os critérios de elegibilidade, ao fim 5 artigos foram incluídos na revisão. Houve redução significativa da dor, em pacientes tratados com MN. Considerando os resultados obtidos nesta revisão, foi possível concluir que a MN demonstra ser eficaz na redução da dor presente na CB. Embora os estudos mostrem que os resultados da MN como tratamento da CB são significativamente inferiores ao efeito do Ibuprofeno, deve-se ter em consideração as consequências a longo prazo para a saúde sobre a utilização de anti- inflamatórios orais.(AU)

Cervicobrachialgia (CB) is characterized by pain originating from different structural levels of the lower cervical spine (C3-C7), w ith bilateral or unilateral irradiation to the upper limb. Considering the causes and consequences of CB, new treatment modalities have been proposed in an attempt to promote effective interventions. Among the physical therapy procedures are manual therapy techniques such as myofascial release, chiropractic, joint mobilization, segmental stabilization and neural mobilization (NM) that seeks to restore the function of neural tissue, its electrical conduction, elasticity, movement and ax oplasmic flow . Thus, the objective of the study w as to evaluate systematically evaluate the evidence on the effect of NM on pain management in individuals w ith CB. The bibliographic search w as performed from November 2018 to June 2019, w ithout limit of year of publication, in the databases: PEDro, PubMed, Virtual Health Library (Lilacs, Scielo and Medline) and Cochrane Library. The analysis w as restricted to randomized controlled trials. For the methodological analysis of the articles eligible for inc lusion, the PEDro scale w as used. A total of 38 articles w ere found. After removal of duplicates, 14 articles w ere elected by abstract, 8 articles w ere retrieved for full reading and analyzed for suitability, of w hich 3 w ere excluded for not meeting eligibility c riteria, at the end 5 articles w ere included in the review . There was a significant pain reduction in patients treated w ith NM. Considering the results obtained in this review , it w as concluded that NM demonstrates to be effective in reducing pain present in CB. Although studies show that the results of NM as a treatment for CB are significantly low er than the effect of ibuprofen, consideration should be given to the long-term health consequences about the utilization of oral anti-inflammatory drugs.(AU)

Elastografía en tiempo real (Supersonic), experiencia de un centro en Bogotá / Real-time elastography (Supersonic), experience of a medical center in Bogotá

Resumen Introducción: la elastografía en tiempo real, 2D-SWE (Supersonic), es una prueba no invasiva que se utiliza para determinar la elasticidad del hígado y, de esa forma, calcular el grado de fibrosis hepática. En Colombia, la prueba se introdujo en 2016 y no existen hasta el momento estudios del comportamiento de la prueba en todos los pacientes hepáticos, solo se han publicado en pacientes sanos y cirróticos. Objetivo: analizar la experiencia de la aplicación de la elastografía en tiempo real, en sujetos atendidos en el centro de enfermedades hepáticas y digestivas de Bogotá, Colombia. Materiales y métodos: estudio descriptivo retrospectivo de una cohorte de sujetos atendidos entre marzo de 2016 y julio de 2017. Se realizó una historia clínica completa y una prueba de elastografía en tiempo real (Supersonic). Resultados: se incluyeron 654 sujetos, con una mediana de edad de 55 años (rango intercuartílico [RIC]: 45-64). La mediana de valores de fibrosis expresada en kilopascales (kPs) fue de 8,3, con un promedio de 5 mediciones. Se observó una diferencia significativa en el grado de fibrosis entre los grupos de edad y en relación con el diagnóstico final, donde se evidenció una mayor fibrosis en el grupo de enfermedades colestásicas (autoinmune, colangitis biliar primaria [CBP] y superposición autoinmune-CBP). La tasa global de fracaso fue menor al 1%. Conclusiones: es la primera descripción del comportamiento de la prueba a nivel nacional. Los valores de rigidez hepática observados en los diferentes estadios demuestran la utilidad de la prueba para la determinación de la fibrosis hepática en pacientes con diferentes patologías.

Abstract Introduction: Real-time two-dimensional shear wave elastography (2D-SWE) (Supersonic Imagine SA), is a non-invasive test used to determine liver elasticity and calculate the degree of liver fibrosis. In Colombia, this test was introduced in 2016 and, to date, no study has tested its behavior in all liver patients, only in healthy and cirrhotic patients. Objective: To analyze the experience of real-time elastography implementation in subjects treated at the Centro de Enfermedades Hepáticas y Digestivas in Bogotá, Colombia. Materials and methods: This is a retrospective descriptive study of a cohort of subjects treated between March 2016 and July 2017. A complete medical report and a real-time elastography (Supersonic) test were performed. Results: 654 subjects were included, with a median age of 55 years (interquartile range [IQR]: 45-64). The median fibrosis values expressed in kilopascals (kPs) were 8.3, with an average of 5 measurements. There was a significant difference in the degree of fibrosis between the age groups and in relation to the final diagnosis, where there was a greater fibrosis in the cholestatic disease group (autoimmune, primary biliary cholangitis [PBC], and overlap). The overall failure rate was less than 1%. Conclusions: This is the first description of this test behavior in the country. Hepatic stiffness values observed in the different stages demonstrate the usefulness of the test to establish the degree of liver fibrosis in patients with multiple diseases.

Can we expect similar behavior among CuNiTi 35°C wires?

ABSTRACT Objective: This paper aims to verify the thermodynamic, mechanical and chemical properties of CuNiTi 35ºC commercial wires. Methods: Forty pre-contoured copper-nickel-titanium thermodynamic 0.017 x 0.025-in archwires with an Af temperature of 35°C were used. Eight wires from five different manufacturers (American Orthodontics® [G1], Eurodonto® [G2], Morelli® [G3], Ormco® [G4] and Orthometric® [G5]) underwent cross-sectional dimension measurements, tensile tests, SEM-EDS and differential scanning calorimetry (DSC) tests. Parametric tests (One-way ANOVA and Tukey post-test) were used, with a significance level of 5%, and Pearson's correlation coefficient test was performed between the Af and chemical elements of the wires. All sample tests and statistical analyses were double-blinded. Results: All wires presented standard dimensions (0.017 x 0.025-in) and superelastic behavior, with mean plateau forces of: G1 = 36.49N; G2 = 27.34N; G3 = 19.24 N; G4 = 37.54 N; and G5 = 17.87N. The Af means were: G1 = 29.40°C, G2 = 29.13°C and G3 = 31.43°C, with p>0.05 relative to each other. G4 (32.77°C) and G5 (35.17°C) presented statistically significant differences between each other and among the other groups. All samples presented Ni, Ti, Cu and Al in different concentrations. Conclusions: The chemical concentration of the elements that compose the alloy significantly influenced the thermodynamic and mechanical properties.

RESUMO Objetivo: O presente artigo teve como objetivo verificar as propriedades termodinâmicas, mecânicas e químicas de fios CuNiTi 35°C comerciais. Métodos: Foram utilizados 40 arcos termodinâmicos pré-contornados de cobre-níquel-titânio de 0,017" x 0,025" e temperatura Af de 35°C. Oito fios de cinco fabricantes diferentes (American Orthodontics® [G1], Eurodonto® [G2], Morelli® [G3], Ormco® [G4] e Orthometric® [G5]) foram submetidos a medições de suas secções transversais, testes de tração, MEV-EDS e calorimetria diferencial (DSC). Foram utilizados testes paramétricos (One-way ANOVA e pós-teste de Tukey), com nível de significância de 5%, e foi realizado o teste do coeficiente de correlação de Pearson entre a temperatura Af e os elementos químicos dos fios. Todos os testes das amostras e análises estatísticas foram duplo-cegos. Resultados: Todos os fios apresentavam dimensões padronizadas (0,017" x 0,025") e comportamento superelástico, com forças médias de platô de G1 = 36,49 N; G2 = 27,34 N; G3 = 19,24 N; G4 = 37,54 N; e G5 = 17,87 N. As médias de Af foram: G1 = 29,40°C, G2 = 29,13°C e G3 = 31,43°C, com p> 0,05 entre si. G4 (32,77°C) e G5 (35,17°C) apresentaram diferenças estatisticamente significativas entre si e entre os demais grupos. Todas as amostras apresentaram Ni, Ti, Cu e Al em diferentes concentrações. Conclusões: A concentração química dos elementos que compõem a liga influenciou significativamente as propriedades termodinâmicas e mecânicas.

Elastografía por ultrasonido endoscópico en el tumor de recto / Endoscopic ultrasound elastography in the rectal tumor

Introducción: Para definir una adecuada estrategia terapéutica en el cáncer de recto es preciso una correcta estadificación. El ultrasonido endoscópico es un método de estadiaje preciso que define la profundidad del tumor y el estado nodal. En los tumores tratados con radioterapia disminuye su rentabilidad por la fibrosis que se origina en la pared rectal; indistinguible de los elementos de malignidad. La elastografía brinda la posibilidad de resolver esta limitación. Objetivo: Ofrecer una actualización sobre la elastografía por ultrasonido endoscópico en el diagnóstico del paciente con tumor rectal. Desarrollo: La elastografía se basa en las alteraciones que en la elasticidad del tejido inducen la fibrosis y el cáncer. Determina si un tejido es maligno o benigno mediante el análisis de su dureza. Se obtienen imágenes que se expresan en un mapa de colores superpuestas a la imagen convencional del ultrasonido endoscópico. Muchas investigaciones demuestran su elevada sensibilidad y especificidad en tumores de páncreas y ganglios linfáticos, algunas en tumores de esófago, sin embargo muy pocas en el cáncer rectal. Conclusiones: La elastografía ha mejorado el diagnóstico y seguimiento oncológico del paciente con tumor rectal(AU)

Introduction: To define an adequate therapeutic strategy in rectal cancer, a correct staging is necessary. For this, advanced diagnostic means have been developed to evaluate the rectal wall. Endoscopic Ultrasound a fundamental technique; combines endoscopic image with ultrasound; in tumors treated with radiotherapy, its profitability decreases due to fibrosis that originates in the rectal wall; indistinguishable from the elements of malignancy. Elastography offers the possibility of resolving this limitation. Objective: To offer an update on elastography by endoscopic ultrasound in the diagnosis of the patient with rectal tumor. Development: Elastography is based on the alterations that fibrosis and cancer induce in the elasticity of the tissue. Determine if a tissue is malignant or benign by analyzing its hardness. Images are obtained that are expressed on a color map superimposed on the conventional endoscopic ultrasound image. Many investigations demonstrate its high sensitivity and specificity in tumors of the pancreas and lymph nodes, some in esophageal tumors, however very few in rectal cancer. Conclusions: Elastography has improved the diagnosis and oncological follow-up of the patient with rectal tumor(AU)

Functional magnetic resonance imaging in the evaluation of the elastic properties of ascending aortic aneurysm

Abstract Objective: To evaluate the aortic wall elasticity using the maximal rate of systolic distension (MRSD) and maximal rate of diastolic recoil (MRDR) and their correlation with the aortic size index (ASI). Methods: Forty-eight patients with thoracic aortic aneurysm were enrolled in this study. A standard magnetic resonance imaging (MRI) protocol was used to calculate MRSD and MRDR. Both MRSD and MRDR were expressed as percentile of maximal area/10-3 sec. ASI (maximal aortic diameter/body surface area) was calculated. A correlation between MRSD, MRDR, ASI, and the patient's age was performed using regression plot. Results: A significant correlation between MRSD (t=-4,36; r2=0.29; P≤0.0001), MRDR (t=3.92; r2=0.25; P=0.0003), and ASI (25±4.33 mm/m2; range 15,48-35,14 mm/m2) is observed. As ASI increases, aortic MRSD and MRDR decrease. Such inverse correlation between MRSD, MRDR, and ASI indicates increased stiffness of the ascending aorta. A significant correlation between the patient's age and the decrease in MRSD and MRDR is observed. Conclusion: MRSD and MRDR are significantly correlated with ASI and the patient's age. They seem to describe properly the increasing stiffness of aortas. These two new indexes provide a promising, accessible, and reproducible approach to evaluate the biomechanical property of the aorta.

Indicaciones actuales de colocación de stent uretral Allium ­ revisión de la literatura / Current Indications for Urethral Allium Stent Placement­Review of the Literature

La estrechez de la uretra es una patología con una prevalencia del 0,6% de la población El estándar de oro establecido para su manejo es la uretroplastia con tasas de éxito variables de hasta el 90% al 95%. El stent uretral surgió en 1988 fabricado con malla de acero inoxidable. Los resultados obtenidos demostraron las complicaciones severas de su implantación. En el 2008 se introdujo el stent Allium producido en Israel con propiedades diferentes como elasticidad y flexibilidad. Puede utilizarse en diferentes entidades como estrechez de uretra bulbar, hiperplasia de próstata y la estenosis de la unión uretrovesical. Recientemente este Stent se está comercializando en Colombia, por lo cual consideramos importante revisar la literatura mundial, las complicaciones e indicaciones reales y así intentar evitar el uso inapropiado de esos dispositivos. Realizamos una Revisión de la literatura en PubMed y ClinicalKey incluyendo los términos, "Stent", "Allium" y "Urethral", incluyendo articulos en inglés y en español. Se encontraron 4 artículos retrospectivos en poblaciones heterogéneas con tasas de éxito inferiores a la cirugía reconstructiva. No se encontraron estudios comparativos. Las indicaciones actuales para colocar un stent uretral podrían ser pacientes en quienes no se puede realizar uretroplastia, o en quienes el manejo endoscópico de la uretra posterior no haya sido efectivo. También pu

Urethral stricture disease is a pathology with a prevalence of 0.6% of the population The gold standard established for its management is urethroplasty with variable success rates of up to 90% to 95%. The urethral stent arose in 1988 manufactured with stainless steel mesh. The results obtained showed the severe complications of its implantation. In 2008, the Allium stent was produced in Israel with different properties such as elasticity and flexibility. It can be used in different entities such as bulbar urethra strictures, prostatic hyperplasia and stenosis of the urethrovesical junction. Recently this Stent is being marketed in Colombia, which is why we consider important to review the literature, complications and real indications and thus try to avoid the inappropriate use of these devices. We conducted a literature review in PubMed and ClinicalKey including the terms "Stent", "Allium" and "Urethral", including articles in English and Spanish. We found 4 retrospective articles in heterogeneous populations with success rates lower than reconstructive surgery. No comparative studies were found. Current indications to place a stent urethral could be patients in whom urethroplasty cannot be performed, or in patients in which endoscopic management of the posterior urethra has not been effective. It can also be an alternative for patients with permanent bladder catheter due to prostatic hyperplasia not suitable for surgery

Force decay evaluation of latex and non-latex orthodontic intraoral elastics: in vivo study

ABSTRACT Objective: This clinical study was conducted in order to evaluate force decay over time of latex and non-latex orthodontic intraoral elastics. Methods: Patients (n = 15) were evaluated using latex and non-latex elastics in the periods of : 0, 1, 3, 12 and 24 hours. The rubber bands were transferred to the testing machine (EMIC DL-500 MF), and force values were recorded after stretching the elastic to a length of 25mm. Paired t test was applied and analysis of variance (ANOVA) was used to evaluate the variation of force generated. LSD (Fisher's least significant difference) post-hoc test was thus employed. Results: As regards the initial forces (zero time), the values of force for non-latex elastic were slightly higher than for the latex elastic. In the subsequent times, the forces generated by the latex elastic showed higher values. Regarding the material degradation, at the end of 24 hours the highest percentage was observed for non-latex elastic. Conclusions: The latex elastics had a more stable behavior during the studied period, compared with non-latex.

RESUMO Objetivo: o objetivo deste estudo clínico foi avaliar e comparar o comportamento dos elásticos de látex e não látex quanto à perda de força ao longo do tempo. Método: os pacientes (n = 15) foram avaliados usando ambos os tipos de material (látex e não látex) em cada tempo: 0, 1, 3, 12 e 24 horas. Os elásticos foram transferidos para a máquina de ensaios mecânicos (EMIC DL-500 MF) e os valores de força foram registrados após a distensão dos elásticos a uma distância de 25 mm. Foi aplicado o teste t pareado, e a análise de variância (ANOVA) foi realizada para verificar a variação das forças geradas em todos os tempos estudados. Em seguida, o teste post-hoc LSD (Fisher's least significant difference) foi aplicado. Resultados: quanto às forças iniciais (tempo zero), os valores de força dos elásticos não látex foram ligeiramente maiores do que dos elásticos de látex. Nos tempos subsequentes, as forças geradas pelos elásticos de látex apresentaram valores superiores às geradas pelos elásticos não látex. Em relação à degradação do material, ao fim do período de 24 horas, o maior percentual foi observado pelos elásticos não látex. Conclusões: os elásticos de látex apresentaram comportamento mais estável durante o período de estudo, em comparação aos não látex.

Analysis of BMSCs-intervened viscoelasticity of sciatic nerve in rats with chronic alcoholic intoxication

Abstract Purpose: To investigate the impact of bone mesenchymal stem cells (BMSCs) intervention on the viscoelasticity of sciatic nerve in rats with chronic alcohol intoxication (CAI). Methods: The CAI rat models were prepared, divided into model groups, and treated with either BMSCs or basic fibroblast growth factor (bFGF). Then the rats underwent electrophysiological test and the serum levels of malondialdehyde (MDA), superoxide dismutase (SOD), and metallothionein (MT) were measured. Histological observation, stress relaxation test, and creep test were performed for the sciatic nerve of the CAI model in each group. Results: The MDA level of group BMSC was significantly lower (p<0.05) than that of groups MOD (the CIA model) and bFGF. The SOD and MT levels were higher in group BMSC than in groups MOD and bFGF (p<0.05). The motor nerve conduction velocity and amplitude were higher in group BMSC than in groups MOD and bFGF (p<0.05). The amounts of 7200s stress reduction and 7200 s strain increase of the sciatic nerve in group BMSC were greater than those in groups bFGF and MOD (p<0.05). Conclusion: Bone mesenchymal stem cells can improve the metabolism of free radicals, restore the tissue morphology and viscoelasticity of the chronic alcohol intoxication animal model, and positively affect the repairing of the injured sciatic nerve.

Biomechanic and histologic analysis of fibroblastic effects of tendon to bone healing by transforming growth factor ß1 (TGF-ß1) in rotator cuff tears

Abstract Purpose: To evaluate the effect of transforming growth factor β1 (TGF-β1) on tendon-to-bone reconstruction of rotator cuff tears. Methods: Seventy-two rat supraspinatus tendons were transected and reconstructed in situ. At 8 and 16 weeks, specimens of three groups; that is control, L-dose (low dose), and H-dose (high dose) were harvested and underwent a biomechanical test to evaluate the maximum load and stiffness values. Histology sections of the tendon-to-bone interface were identified by hematoxylin-eosin or Masson trichrome stain. Collagen type III was observed by picric acid sirius red staining under polarized light. The level of insulin-like growth factor 1 (IGF-1) and vascular endothelial growth factor (VEGF) was measured by the enzyme-linked immunosorbent assay (ELISA) method. Results: Collagen type III of the H-dose group had a significant difference in histology structure compared with the L-dose group (P<0.05). The maximum load and stiffness decreased significantly in the control group compared with the values of the L-dose and H-dose groups. The stiffness among the three groups differed significantly at the same postoperative time (P<0.05). Interestingly, progressive reestablishment of collagen type III affected tendon-to-bone healing significantly in the later stages. Conclusion: The H-dose was associated with an increased collagen type III morphology stimulated by TGF-β1.

Antiretroviral therapy and arterial elasticity in HIV-infected patients

Cardiovascular risk is increased in HIV-infected patients and has become a leading cause of morbimortality in this population. The purpose of this study is to compare HIV-infected patients on antiretroviral therapy (ART) and ART-naïve HIV-infected patients regarding arterial elasticity. From September 2010 to September 2015, 105 HIV-infected subjects were enrolled, 41 ART-naïve and 64 on ART with stable viral suppression. Elasticity of large and small arteries (LAE and SAE) was assessed by analysis of radial pulse waveforms using a calibrated device. A single set of measurements was performed. Multivariate linear regression models were constructed to estimate independent correlates of arterial elasticity. On-ART and ART-naïve patients were similar with respect to gender, age, body mass index, Framingham cardiovascular risk score, smoking habits, and CD4+ counts. Median time on treatment was 60 months and 79% of patients were on regimens based on non-nucleoside reverse-transcriptase inhibitors. No significant differences in LAE and SAE assessments were found between groups. However, time on ART and cholesterol levels were independently associated with LAE impairment. No association between arterial elasticity and CD4+ counts was found. We conclude that cumulative exposure to ART may play a role on LAE impairment and deserves further investigation.

El riesgo cardiovascular está incrementado en los pacientes HIV seropositivos y se ha convertido en una de las principales causas de morbimortalidad en esta población. El objetivo de este estudio fue comparar la elasticidad de grandes y pequeñas arterias (LAE y SAE) en pacientes infectados por HIV con y sin terapia antirretroviral. De septiembre de 2010 a septiembre de 2015 se enrolaron 105 pacientes con infección por HIV, 41 vírgenes de antirretrovirales y 64 con tratamiento estable en supresión viral. LAE y SAE fueron evaluados mediante análisis de la onda de pulso radial. Se construyeron modelos de regresión lineal múltiple para evaluar los predictores independientes de la elasticidad arterial. Los grupos en tratamiento y naïve fueron similares con respecto al sexo, edad, índice de masa corporal, índice de Framingham, tabaquismo y recuento de CD4+. La mediana de tiempo en tratamiento antirretroviral fue 60 meses y el 79% de los pacientes recibieron inhibidores no nucleosídicos. No hubo diferencias significativas entre los grupos en los valores de LAE y SAE. Sin embargo, el tiempo en tratamiento y el nivel de colesterol plasmático se asociaron independientemente con deterioro de LAE. No observamos asociaciones entre la elasticidad arterial y los recuentos de CD4+. Concluimos que la exposición acumulada al tratamiento antirretroviral podría contribuir al deterioro de la LAE. Este hallazgo merece ulterior investigación.

Structural and mechanical characterization of custom design cranial implant created using additive manufacturing

Background: Reconstruction of customized cranial implants with a mesh structure using computer-assisted design and additive manufacturing improves the implant design, surgical planning, defect evaluation, implant-tissue interaction and surgeon's accuracy. The objective of this study is to design, develop and fabricate cranial implant with mechanical properties closer to that of bone and drastically decreases the implant failure and to improve the esthetic outcome in cranial surgery with precision fitting for a better quality of life. A customized cranial mesh implant is designed digitally, based on the Digital Imaging and Communication in Medicine files and fabricated using state of the Art-Electron Beam Melting an Additive Manufacturing technology. The EBM produced titanium implant was evaluated based on their mechanical strength and structural characterization. Results: The result shows, the produced mesh implants have a high permeability of bone ingrowth with its reduced weight and modulus of elasticity closer to that the natural bone thus reducing the stress shielding effect. Scanning electron microscope and micro-computed tomography (CT) scanning confirms, that the produced cranial implant has a highly regular pattern of the porous structure with interconnected channels without any internal defect and voids. Conclusions: The study reveals that the use of mesh implants in cranial reconstruction satisfies the need of lighter implants with an adequate mechanical strength, thus restoring better functionality and esthetic outcomes for the patients.

Vascular Aging and Arterial Stiffness / Envelhecimento Vascular e Rigidez Arterial

Abstract Cardiovascular diseases (CVD) account annually for almost one third of all deaths worldwide. Among the CVD, systemic arterial hypertension (SAH) is related to more than half of those outcomes. Type 2 diabetes mellitus is an independent risk factor for SAH because it causes functional and structural damage to the arterial wall, leading to stiffness. Several studies have related oxidative stress, production of free radicals, and neuroendocrine and genetic changes to the physiopathogenesis of vascular aging. Indirect ways to analyze that aging process have been widely studied, pulse wave velocity (PWV) being considered gold standard to assess arterial stiffness, because there is large epidemiological evidence of its predictive value for cardiovascular events, and it requires little technical knowledge to be performed. A pulse wave is generated during each cardiac contraction and travels along the arterial bed until finding peripheral resistance or any bifurcation point, determining the appearance of a reflected wave. In young individuals, arteries tend to be more elastic, therefore, the reflected wave occurs later in the cardiac cycle, reaching the heart during diastole. In older individuals, however, the reflected wave occurs earlier, reaching the heart during systole. Because PWV is an important biomarker of vascular damage, highly valuable in determining the patient's global cardiovascular risk, we chose to review the articles on vascular aging in the context of cardiovascular risk factors and the tools available to the early identification of that damage.

Resumo As doenças cardiovasculares são anualmente responsáveis por quase um terço do total de mortes no mundo. Dentre elas, a hipertensão arterial sistêmica (HAS) está relacionada com mais da metade desses desfechos. O diabetes mellitus tipo 2 é visto com um fator de risco independente para HAS por causar lesões funcionais e estruturais na parede arterial, ocasionando-lhe enrijecimento. Diversos estudos relacionam o stress oxidativo, a produção de radicais livres, as alterações neuroendócrinas e genéticas com a fisiopatogenia do envelhecimento vascular. Formas indiretas para analisar esse processo de envelhecimento têm sido amplamente estudadas, dentre elas, a velocidade de onda de pulso (VOP) é vista como o padrão-ouro para avaliar a rigidez arterial por existir maior número de evidências epidemiológicas do seu valor preditivo para eventos cardiovasculares além de requerer pouco conhecimento técnico para sua realização. A onda de pulso é gerada durante cada contração cardíaca e percorre o leito arterial até encontrar resistência periférica ou algum ponto de bifurcação, ocasionando o surgimento de uma onda refletida. Em indivíduos jovens, as artérias tendem a ser mais elásticas, em consequência, a onda é refletida mais tardiamente no ciclo cardíaco e atinge o coração no momento da diástole, enquanto nos mais velhos, com reflexão mais precoce da onda, tende a acontecer na sístole. Por ser a VOP um importante biomarcador de dano vascular, de grande valia para a determinação do risco global cardiovascular do paciente, optamos por revisar os artigos referentes ao envelhecimento vascular no contexto dos fatores de risco cardiovasculares e as ferramentas disponíveis para a identificação precoce desse dano.

Degradación de la Fuerza de los Elásticos Intermaxilares de Látex y no Látex / Force Degradation of Latex and Non Latex Intermaxillary Elastics

RESUMEN: El propósito del presente estudio fue comparar la degradación de la fuerza entre los elásticos de látex y no látex de 3/16" y 6 oz. La muestra consistió en 30 elásticos por grupo e intervalo de tiempo haciendo un total de 180 elásticos de látex y 180 de no látex. Se midió la fuerza inicial de 30 elásticos de látex y 30 de no látex. Los demás fueron sometidos a tracción estática bajo condiciones orales de humedad y temperatura por 1, 3, 6, 12 y 24 horas antes de la medición de la fuerza con un dinamómetro (Correx 250 g, Alemania). Se emplearon las pruebas de Friedman, Wilcoxon y la U de Mann-Whitney para determinar si existían diferencias significativas. Se encontró que los elásticos de látex presentaron una degradación media de la fuerza de 13,8 %, 17,4 %, 18,2 %, 21 % y 23,4 % a las 1, 3, 6, 12 y 24 horas, respectivamente. Los elásticos de no látex presentaron una degradación media de la fuerza de 32,5 %, 39,6 %, 44,4 %, 51,1 % y 56% a las 1, 3, 6, 12 y 24 horas, respectivamente. Cuando se compararon los valores hallados entre los dos tipos de elásticos en todos los momentos evaluados se encontraron diferencias estadísticamente significativas (p<0,001). Conclusión: La degradación de la fuerza para los elásticos de látex fue menor al de los elásticos de no látex en todos los intervalos de tiempo.

ABSTRACT: The purpose of this study was to compare the force degradation between latex and non latex elastic 3/16" 6oz. The sample consisted of 30 elastics per group and time interval, 180 latex and 180 non latex elastics were used. The initial force was measured in 30 latex elastics and 30 non latex elastics. Others elastics were subjected to static traction in conditions of humidity and temperature for 1, 3, 6, 12 and 24 hours. The force was measured with a dynamometer (Correx 250 g, Germany). Wilcoxon test and Mann-Whitney test was employed to determine significant differences. The latex elastics showed a mean force degradation of 13.8 % during the first hour, 17.4 % at 3 hours, 18.2 % at 6 hours, 21 % at 12 hours and 23. 4 % at 24 hours. The non elastics latex showed a mean force degradation of 32.5 % during the first hour, 39.6 % at 3 hours, 44.4 % at 6 hours, 51.1 % at 12 hours and 56% at 24 hours. It was concluded that the latex elastics force degradation was less than the non-elastics latex in all times.

Discoloration and force degradation of orthodontic elastomeric ligatures

ABSTRACT OBJECTIVE: The aim of the present study was to evaluate color changes and force degradation of orthodontic elastomeric ligatures in different stretching patterns during a 8-weeks period. METHODS: Two elastomers with the minimum and two with the maximum color changing, and gray elastomers of two brands (American Orthodontics and Ortho Technology) were selected according to an opinion poll with clinicians and color changes after 4 weeks of intraoral use were evaluated. These elastomers were mounted on special jigs fabricated using a CAD-CAM technique, underwent different stretching patterns and the force was measured in 0, 24 hours, 2, 4 and 8 weeks. During in vivo part of the study, force levels of elastomers were measured after 4 weeks on a material testing machine. Data were analyzed with four-way ANOVA and Tukey post hoc tests. RESULTS: All the elastomers showed color changing but the degree of color stability was significantly different. The mean force degradation was higher in 1-mm stretch groups. After 8 weeks, the average residual force of elastomers was 1.45 ± 0.18 N and the maximum force decay was seen in the elastomers that exhibited the maximum initial force. CONCLUSION: There is significant relationship between the stretching pattern and the amount of residual force of elastomers. Elastomers with higher initial forces exhibited higher percentages of force loss after 8 weeks. It seems that there is a relationship between initial color and color changing of elastomers.

RESUMO OBJETIVO: o objetivo do presente estudo foi avaliar as alterações de cor e a degradação da força de ligaduras elásticas em diferentes padrões de estiramento, durante um período de 8 semanas. MÉTODOS: duas ligaduras elásticas com alteração mínima de cor, duas com alteração máxima de cor e ligaduras elásticas na cor cinza de duas marcas comerciais (American Orthodontics e Ortho Technology) foram selecionadas de acordo com uma pesquisa de opinião com clínicos, e mediante a avaliação das alterações de cor após quatro semanas em uso intrabucal. Essas ligaduras elásticas foram montadas em jigs fabricados por meio da técnica CAD-CAM e foram expostas a diferentes padrões de estiramento, e a força foi medida nos tempos de 0h, 24h; 2, 4 e 8 semanas. Durante a parte in vivo do estudo, os níveis de força das ligaduras elásticas foram medidos após 4 semanas, em uma máquina de teste de materiais. Os dados foram analisados com os testes ANOVA de quatro vias e post-hoc de Turkey. RESULTADOS: todas as ligaduras elásticas mostraram alterações de cor, mas houve diferenças significativas quanto ao grau de estabilidade da cor. A média de degradação da força foi mais alta nos grupos com estiramento a 1 mm. Após 8 semanas, a média da força residual nas ligaduras elásticas foi de 1,45 ± 0,18 N e a maior degradação na força foi observada nas ligaduras elásticas que apresentaram a maior força inicial. CONCLUSÃO: há uma relação significativa entre o padrão de estiramento e a quantidade de força residual nas ligaduras elásticas. As ligaduras elásticas com as maiores forças iniciais exibiram as mais altas porcentagens de degradação da força após 8 semanas. É, também, possível que haja uma relação entre a cor inicial da ligadura elástica e sua alteração de cor.

Measurement of expansin activity and plant cell wall creep by using a commercial texture analyzer

Background: Expansins play an important role in cell wall metabolism and fruit softening. Determination of expansin activity is a challenging problem since it depends on measuring cell wall properties by using ad hoc extensometers, a fact that has strongly restricted its study. Then, the objective of the work was to adapt a methodology to measure cell wall creep and expansin activity using a commercial texture meter, equipped with miniature tensile grips and an ad hoc cuvette of easy construction. Results: It was possible to measure hypocotyls acid growth and expansin activity in a reliable and reproducible way, using a commercial texture meter, common equipment found in laboratories of food science or postharvest technology. Expansin activity was detected in protein extracts from cucumber hypocotyls, tomato and strawberry fruits, and statistical differences in expansin activity were found in both fruit models at different ripening stages. Conclusions: The possibility of measuring expansin activity following this adapted protocol with a commercial texture meter could contribute to ease and increase the analysis of expansin in different systems, leading to a better understanding of the properties of these proteins under different experimental conditions.

Deformation of nickel-titanium closed coil springs: an in vitro study

ABSTRACT Objective: The aim of this paper was to determine the amount of deformation in four commercial brands of nickel-titanium closed springs. Methods: A total of 130 springs were divided into 13 subgroups, according to their features and manufacturers (Morelli, Orthometric, Ormco and GAC) and activated from 100% to 1000% of the effective length of the nickel-titanium portion present at the spring, at 37 °C. Deactivation data were plotted and deformation was found graphically. The values were compared by analysis of variance and Tukey's post-hoc test. Results: Springs manufactured by Morelli had the same amount of deformation when they were activated up to 700% of Y activation; springs by Orthometric had the same amount of deformation up to 600-700% of Y; springs by Ormco had the same amount of deformation up to 700-800% of Y; and finally, the majority of springs by GAC had similar deformation up to 800%-1000% of activation. All springs tested could be activated up to 700% without rupture. Conclusions: Most subgroups were similarly deformed up to 700% of activation, without rupture of springs. Subgroups 4B, 4C, 4D and 4E showed the same amount of deformation up to 1000% of activation without any rupture at all.

RESUMO Objetivo: o objetivo desse trabalho foi determinar a deformação em molas fechadas de níquel-titânio de quatro marcas comerciais. Métodos: cento e trinta molas foram divididas em treze subgrupos, de acordo com suas características e fabricantes (Morelli, Orthometric, Ormco e GAC), com ativação entre 100% e 1.000% do comprimento efetivo de níquel-titânio presente na mola (Y), a 37 °C. Dados de desativação foram coletados e a deformação foi obtida de forma gráfica. Os valores foram comparados por meio de análise de variância e teste post-hoc de Tukey. Resultados: as molas da Morelli apresentaram a mesma quantidade de deformação considerando-se 700% de ativação de Y; as molas da Orthometric tiveram a mesma quantidade de deformação até 600-700% de Y; as molas da Ormco tiveram a mesma quantidade de deformação até 700-800% de Y; e, por fim, a maioria das molas da GAC apresentou deformação semelhante até 800-1.000% de ativação. Todas as molas testadas puderam ser ativadas até 700% sem ruptura. Conclusões: a maioria dos subgrupos se deformou de maneira semelhante até 700% de ativação, sem ruptura das molas. Os subgrupos 4B, 4C, 4D e 4E demonstraram a mesma quantidade de deformação até 1.000% de ativação, sem nenhuma ruptura.

Photoelastic analysis of stress generated by Connecticut Intrusion Arch (CIA)

ABSTRACT Objective: The present in vitro study evaluated, by means of the photoelastic technique, the effects generated by the Connecticut Intrusion Arch (CIA), with a 90o bend on the distal surface of molar tubes and using the 4 x 2 appliance on the anterior and posterior regions of the upper dental arch. Methods: Five models were manufactured, in which two different clinical situations were correlated: 1) use of intrusion arch not cinched back and transpalatal bar for anchorage (Group 1); 2) use of intrusion arch cinched back and transpalatal bar for anchorage (Group 2). Stress generated in the apical and middle regions of tooth roots of maxillary anterior teeth and maxillary first molars was evaluated. Results: Taking a reference value of 1.0 MPa = 100%, qualitative descriptive analysis was performed, which showed uniformity between stress values in the apical region of anterior teeth of both groups (G1 and G2). In the posterior region, for models with the arch cinched back (G2), stress remained within 100%. As for G1 models (with the arch not cinched back), variations in the mesial surface of first molars were observed, with an increase of 20% in the generated stress. The apical region did not undergo any changes, while in the distal region of molars there was a decrease of 20% in stress. Conclusion: Laboratory results revealed differences in stress between Groups 1 and 2 in the molar region, thereby indicating that there was a tendency towards mesial root tipping of first molars when the distal end of the CIA was not cinched back.

RESUMO Objetivo: o presente estudo in vitro avaliou, por meio da técnica de fotoelasticidade, os efeitos produzidos pelo Arco de Intrusão de Connecticut (CIA) com dobra de 90o na face distal dos tubos molares e usando um aparelho 4 x 2 nas regiões anterior e posterior da arcada dentária superior. Métodos: foram confeccionados cinco modelos, aos quais foram correlacionadas duas situações clínicas diferentes: 1) uso do arco de intrusão sem dobra distal, mas com barra transpalatina para ancoragem (G1); 2) uso do arco de intrusão com dobra distal e barra transpalatina para ancoragem (G2). Avaliou-se as tensões geradas nos terços apical e médio das raízes dos dentes anterossuperiores e primeiros molares superiores. Resultados: considerando-se um valor de referência de 1,0 MPa = 100%, foi realizada uma análise descritiva qualitativa, a qual demonstrou uniformidade entre os valores de tensão na região apical dos dentes anteriores nos dois grupos (G1 e G2). Na região posterior dos modelos com arcos com dobra distal (G2), a tensão foi mantida em 100%. Já nos modelos do G1 (arco sem dobra distal), foram observadas variações na face mesial dos primeiros molares, com um aumento de 20% na tensão gerada. A região apical não sofreu qualquer alteração, ao passo que, na região distal dos molares, houve uma diminuição de 20% na tensão. Conclusão: os resultados laboratoriais revelaram diferenças, entre os grupos 1 e 2, para a tensão gerada na região dos molares, indicando que houve uma tendência de mesialização da raiz dos primeiros molares quando não foi realizada a dobra na extremidade distal do CIA.