Hard tissue formation in pulpotomized primary teeth in dogs with nanomaterials MCM-48 and MCM-48/hydroxyapatite: an in vivo animal study.

BACKGROUND: This animal study sought to evaluate two novel nanomaterials for pulpotomy of primary teeth and assess the short-term pulpal response and hard tissue formation in dogs. The results were compared with mineral trioxide aggregate (MTA). METHODS: This in vivo animal study on dogs evaluated 48 primary premolar teeth of 4 mongrel female dogs the age of 6-8 weeks, randomly divided into four groups (n = 12). The teeth underwent complete pulpotomy under general anesthesia. The pulp tissue was capped with MCM-48, MCM-48/Hydroxyapatite (HA), MTA (positive control), and gutta-percha (negative control), and the teeth were restored with intermediate restorative material (IRM) paste and amalgam. After 4-6 weeks, the teeth were extracted and histologically analyzed to assess the pulpal response to the pulpotomy agent. RESULTS: The data were analyzed using the Kruskal‒Wallis, Fisher's exact, Spearman's, and Mann‒Whitney tests. The four groups were not significantly different regarding the severity of inflammation (P = 0.53), extent of inflammation (P = 0.72), necrosis (P = 0.361), severity of edema (P = 0.52), extent of edema (P = 0.06), or connective tissue formation (P = 0.064). A significant correlation was noted between the severity and extent of inflammation (r = 0.954, P < 0.001). The four groups were significantly different regarding the frequency of bone formation (P = 0.012), extent of connective tissue formation (P = 0.047), severity of congestion (P = 0.02), and extent of congestion (P = 0.01). No bone formation was noted in the gutta-percha group. The type of newly formed bone was not significantly different among the three experimental groups (P = 0.320). CONCLUSION: MCM-48 and MCM-48/HA are bioactive nanomaterials that may serve as alternatives for pulpotomy of primary teeth due to their ability to induce hard tissue formation. The MCM-48 and MCM-48/HA mesoporous silica nanomaterials have the potential to induce osteogenesis and tertiary (reparative) dentin formation.

Histological evaluation of the regenerative potential of a novel photocrosslinkable gelatin-treated dentin matrix hydrogel in direct pulp capping: an animal study.

BACKGROUND: To assess histologically the success of the pulp capping approach performed in traumatically exposed dogs' teeth using a novel injectable gelatin-treated dentin matrix light cured hydrogel (LCG-TDM) compared with LCG, MTA and TheraCal LC. METHODS: Sixty-four dogs' teeth were divided into two groups (each including 32 teeth) based on the post-treatment evaluation period: group I: 2 weeks and group II: 8 weeks. Each group was further subdivided according to the pulp capping material into four subgroups (n = 8), with subgroup A (light-cured gelatin hydrogel) as the control subgroup, subgroup B (LCG-TDM), subgroup C (TheraCal LC), and subgroup D (MTA). Pulps were mechanically exposed in the middle of the cavity floor and capped with different materials. An assessment of periapical response was performed preoperatively and at 8 weeks. After 2 and 8-week intervals, the dogs were sacrificed, and the teeth were stained with hematoxylin-eosin and graded by using a histologic scoring system. Statistical analysis was performed using the chi-square and Kruskal-Wallis tests (p = 0.05). RESULTS: All subgroups showed mild inflammation with normal pulp tissue at 2 weeks with no significant differences between subgroups (p ≤ 0.05), except for the TheraCal LC subgroup, which exhibited moderate inflammation (62.5%). Absence of a complete calcified bridge was reported in all subgroups at 2 weeks, while at 8 weeks, the majority of samples in the LCG-TDM and MTA-Angelus subgroups showed complete dentin bridge formation and absence of inflammatory pulp response with no significant differences between them (p ≤ 0.05). However, the formed dentin in the LCG-TDM group was significantly thicker, with layers of ordered odontoblasts identified to create a homogeneous tubular structure and numerous dentinal tubule lines suggesting a favourable trend towards dentin regeneration. TheraCal LC samples revealed a reasonably thick dentin bridge with moderate inflammation (50%) and LCG showed heavily fibrous tissue infiltrates with areas of degenerated pulp with no signs of hard tissue formation. CONCLUSIONS: LCG-TDM, as an extracellular matrix-based material, has the potential to regenerate dentin and preserve pulp vitality, making it a viable natural alternative to silicate-based cements for healing in vivo dentin defects in direct pulp-capping procedures.

Impact of Type 2 Diabetes Mellitus on the Occurrence of Vertical Root Fracture: A Case Control Study.

INTRODUCTION: The aim of this case-control study was to examine the relationship between type 2 diabetes mellitus (DM) and the occurrence of VRFs. The crack extension, dentin sclerosis, and chemical characteristics of root dentin in teeth with VRF from patients with/without DM were also compared. METHODS: One hundred and thirty-two patients diagnosed with VRF in crowned root filled posterior teeth were selected. The study was conducted in 2 parts. In Part-1: The cases were matched with control teeth (1:1) for age (±5 years), sex, tooth type, apical extent of root filling, time period after root filling to a diagnosis of VRF, presence or absence of intracanal post and abutment status. The presence or absence of type 2 DM (HbA1c > 6.5) was recorded. In Part-2: The extracted teeth with VRF from the case control study were used to evaluate the extension of VRF, presence of sclerotic dentin and isthmus using a microscopic analysis; while the levels of pentosidine, collagen cross-linking ratio and mineral-collagen ratio were determined by Fourier-transform infrared spectroscopy. The distribution of DM between cases and controls was analyzed using Pearson Chi-Square test and Odds Ratio estimated. Chemical composition data was analyzed using Mann-Whitney test. The extent of sclerotic dentin was analyzed using Pearson Chi-Square test. RESULTS: When compared to patients without DM, patients with DM had 2.67 (95% CI: 1.6-4.45) folds higher odds for occurrence of VRF. Pentosidine (P = .014), collagen cross-linking ratio(P = .047), mineral-collagen ratio (P = .009) and sclerotic dentin extent (P = .0009) were significantly higher in patients with DM and VRF. CONCLUSIONS: Type 2 DM was more often associated with VRFs in root canal treated teeth with crowns. Root dentin from patients with type 2 DM and VRF had higher levels of pentosidine, collagen cross-linking ratio, mineral to collagen ratio and sclerotic dentin.

Sensory nerves, but not sympathetic nerves, promote reparative dentine formation after dentine injury via CGRP-mediated angiogenesis: An in vivo study.

AIM: Dental pulp is richly innervated by nerve fibres, which are mainly involved in the sensation of pain. Aside from pain sensation, little is known regarding the role of dental innervation in reparative dentine formation. We herein generated a mouse model of experimental dentine injury to examine nerve sprouting within the odontoblast and subodontoblastic layers and investigated the potential effects of this innervation in reparative dentinogenesis. METHODOLOGY: Mouse tooth cavity model (bur preparation + etching) was established, and then nerve sprouting, angiogenesis and reparative dentinogenesis were determined by histological and immunofluorescent staining at 1, 3, 7, 14 and 28 days postoperatively. We also established the mouse-denervated molar models to determine the role of sensory and sympathetic nerves in reparative dentinogenesis, respectively. Finally, we applied calcitonin gene-related peptide (CGRP) receptor antagonist to analyse the changes in angiogenesis and reparative dentinogenesis. RESULTS: Sequential histological results from dentine-exposed teeth revealed a significant increase in innervation directly beneath the injured area on the first day after dentine exposure, followed by vascularisation and reparative dentine production at 3 and 7 days, respectively. Intriguingly, abundant type H vessels (CD31+ Endomucin+ ) were present in the innervated area, and their formation precedes the onset of reparative dentine formation. Additionally, we found that sensory denervation led to blunted angiogenesis and impaired dentinogenesis, while sympathetic denervation did not affect dentinogenesis. Moreover, a marked increase in the density of CGRP+ nerve fibres was seen on day 3, which was reduced but remained elevated over the baseline level on day 14, whereas the density of substance P-positive nerve fibres did not change significantly. CGRP receptor antagonist-treated mice showed similar results as those with sensory denervation, including impairments in type H angiogenesis, which confirms the importance of CGRP in the formation of type H vessels. CONCLUSIONS: Dental pulp sensory nerves act as an essential upstream mediator to promote angiogenesis, including the formation of type H vessels, and reparative dentinogenesis. CGRP signalling governs the nerve-vessel-reparative dentine network, which is mostly produced by newly dense sensory nerve fibres within the dental pulp.

Reparative Dentin Formation Following Dental Pulp Capping is Mediated by TNFR1 In Vivo.

INTRODUCTION: Tumor necrosis factor (TNF)-α is a pro-inflammatory cytokine that promotes biomineralization in vitro in dental pulp cells. However, the role of TNF-α-TNF receptor 1 (TNFR1) signaling in reparative dentin formation and related inflammatory pathways is not known. Therefore, the aim of this study was to evaluate the role of the TNF-α-TNFR1 axis in dental pulp repair following pulp capping in vivo. METHODS: Dental pulp repair response of genetically deficient TNF-α receptor-1 mice (TNFR1-/-; n = 20) was compared with that of C57Bl6 mice (wild type [WT]; n = 20). Pulp capping was performed with mineral trioxide aggregate on the mandibular first molars of mice. After 7 and 70 days, tissues were collected and stained with hematoxylin and eosin for histopathological and histometric evaluation, and assessed by the Brown and Brenn methods for histomicrobiological analysis and by immunohistochemistry to localize TNF-α, Runt-related transcription factor 2, Dentin Sialoprotein (DSP) and Osteopontin (OPN) expression. RESULTS: Compared with WT mice, TNFR1-/- mice showed significantly decreased reparative dentin formation with a lower mineralized tissue area (P < .0001). Unlike WT mice, TNFR1-/- mice also exhibited significant dental pulp necrosis, neutrophil recruitment, and apical periodontitis formation (P < .0001) without bacterial tissue invasion. TNFR1-/- animals further exhibited decreased TNF-α, DSP, and OPN expression (P < .0001), whereas Runt-related transcription factor 2 expression was unchanged (P > .05). CONCLUSION: The TNF-α-TNFR1 axis is involved in reparative dentin formation following dental pulp capping in vivo. Genetic ablation of TNFR1 modified the inflammatory process and inhibited the expression of the DSP and OPN mineralization proteins, which culminated in dental pulp necrosis and development of apical periodontitis.

Clinical evaluation of surface treatment on clinical performance of non-carious sclerotic cervical lesions: 18-month follow-up.

PURPOSE: To evaluate the influence of different surface treatments on the clinical behavior of non-carious cervical sclerotic lesions (NCCLs) over an 18-month follow-up period. METHODS: 128 NCCLs from 32 volunteers were randomized into four groups (n=32): G1-control, without preoperative treatment of the dentin surface; G2, dentin conditioning with 17% ethylenediaminetetracetic acid (EDTA) for 2 minutes; G3, increase in dentin surface roughness with diamond bur and G4, increase in dentin surface roughness with diamond bur + dentin conditioning with 17% EDTA for 2 minutes. RESULTS: Differences between groups were tested using the Friedman test (α= 0.05). A questionnaire was administered to volunteers about risk factors related to NCCLs. The relationship between the questionnaire data and the clinical performance of the restorations was analyzed using the multiple logistic regression test (α= 0.05). The variables related to parafunctional habits, anxiety and/or depression were significantly related to the manifestation of postoperative sensitivity. Roughening the sclerotic dentin with a diamond bur increased postoperative sensitivity within 12 months. The presence of parafunctional habits and anxiety/depression may lead to postoperative sensitivity. CLINICAL SIGNIFICANCE: Roughening the sclerotic dentin with a diamond bur increased postoperative sensitivity within 12 months.

Nano eggshell-based slurry as a direct pulp-capping material: In vitro characterization and histopathological assessment in an experimental animal model.

AIM: Pulp vitality is essential for tooth integrity. Following pulp exposure, choosing a suitable pulp-capping material is crucial to maintain pulp vitality. However, the reparative dentine bridge created by calcium hydroxide (Ca(OH)2 ) is generally porous and incomplete. The aim of the current study is to assess the in vitro and in vivo bioactivities of nano eggshell-based slurry (NES), using NES as a direct pulp-capping material, compared with Ca(OH)2 in rabbit animal model. METHODOLOGY: Nano eggshell powder (NE) was characterized for particle morphology, chemical composition and ion release. In vitro bioactivity was tested by immersion in simulated body fluid (SBF) for 7 days. For histopathological evaluation, 36 adult New Zealand rabbits (72 pulp exposures) were divided into nine groups (n = 8) according to the pulp-capping material (NES, Ca(OH)2 and no capping as negative control group) and the animals were sacrificed after 7, 14 or 28 days. The pulps of the two lower central incisors were exposed and then directly capped by Ca(OH)2 or NES or left untreated. The cavities were then sealed with glass ionomer cement. Teeth were collected for histopathological evaluation using an optical microscope. Pulp haemorrhage, inflammation, fibrosis and calcific bridge formation were assessed. Results were statistically analysed using anova and Tukey's tests. RESULTS: Nano eggshell particles were spherical with a 20 nm diameter and were composed mainly of calcite. Statistical analysis showed that there was a significant increase in the release of all investigated ions between days 1 and 28, except for copper. NES group showed a significantly higher release of all elements as compared to Ca(OH)2 . Environmental scanning electron microscope micrographs of NES incubated for 7 days in SBF showed the formation of HAp with a Ca/P ratio (1.686). For histopathological evaluation, the difference between groups was statistically significant. At day 28, 75% of the pulps of the Ca(OH)2 group showed mild calcific bridge in comparison with 100% moderate calcific bridge in the NES group. The NES group showed significantly less inflammation at days 7 and 28, and higher fibrosis at day 7 compared with Ca(OH)2 . CONCLUSIONS: Nano eggshell-based slurry represents a promising novel direct pulp-capping material with favourable pulp tissue response.

Enhancing Effects of Immobilized Chondroitin Sulfate on Odontogenic Differentiation of Dental Pulp Stem Cells and Reparative Dentin Formation.

INTRODUCTION: Chondroitin sulfate (CS) is a major proteoglycan involved in the mineralization of the organic matrix of dentin. In this study, the roles of CS immobilized in cross-linked collagen I (Col I) hydrogels on odontogenic differentiation of dental pulp stem cells (DPSCs) and reparative dentin formation were investigated. METHODS: Different concentrations of CS were incorporated into the genipin-cross-linked Col I hydrogels (CS-0.05, CS-0.1, and CS-0.2, respectively). The influences of CS on the proliferation and odontogenic differentiation of DPSCs were investigated. Finally, the effect of the functionalized hydrogel on the formation of reparative dentin was analyzed in a rat pulp capping model in vivo. RESULTS: CS improved the proliferation of DPSCs seeded on the hydrogels (P < .05). CS also enhanced the mineralization activities and increased the expression levels of the odontogenic-related proteins of DPSCs on days 7 and 14 (P < .05). In vivo, CS-0.1 hydrogel induced reparative dentin formation with higher quality compared with mineral trioxide aggregate. CONCLUSIONS: CS immobilized in Col I hydrogels could induce odontogenic differentiation of DPSCs in vitro and promote homogeneous mineralized barrier formation in vivo. CS-Col I hydrogel has the potential for reparative dentin formation of high quality in direct pulp capping.

Axin2-CreERT2 mediated knockout of bone morphogenetic protein receptor type 1A caused abnormal secondary dentine and altered cell fate of Axin2-expressing odontogenic cells.

AIM: Inducing odontogenic differentiation and tubular dentine formation is extremely important in dentine repair and tooth regeneration. Bone morphogenic proteins (BMPs) signalling plays a critical role in dentine development and tertiary dentine formation, whilst how BMPR1A-mediated signalling affects odontoblastic differentiation of Axin2-expressing (Axin2+ ) odontogenic cells and tubular dentine formation remains largely unknown. This study aims to reveal the cellular and molecular mechanisms involved in the formation of secondary dentine. METHODOLOGY: Axin2lacZ/+ mice harvested at post-natal 21 (P21) were used to map Axin2+ mesenchymal cells. Axin2CreERT2/+ ; R26RtdTomato/+ mice and Axin2CreERT2/+ ; R26RDTA/+ ; R26RtdTomato/+ mice were generated to observe the tempo-spatial distribution pattern of Axin2-lineage cells and the effect of ablation of Axin2+ cells on dentinogenesis, respectively. A loss-of-function model was established with Axin2CreERT2/+ ; Bmpr1afl/fl ; R26RtdTomato/+ (cKO) mice to study the role of BMP signalling in regulating Axin2+ cells. Micro-computed tomography, histologic and immunostainings, and other approaches were used to examine biological functions, including dentine formation, mineralization and cell differentiation in cKO mice. RESULTS: The results showed rich expression of Axin2 in odontoblasts at P21. Lineage tracing assay confirmed the wide distribution of Axin2 lineage cells in odontoblast layer and dental pulp during secondary dentine formation (P23 to P56), suggesting that Axin2+ cells are important cell source of primary odontoblasts. Ablation of Axin2+ cells (DTA mice) significantly impaired secondary dentine formation characterized with notably reduced dentine thickness (Mean of control: 54.11 µm, Mean of DTA: 27.79 µm, p = .0101). Furthermore, malformed osteo-dentine replaced the tubular secondary dentine in the absence of Bmpr1a with irregular cell morphology, abnormal cellular process formation and lack of cell-cell tight conjunction. Remarkably increased expression of osteogenic markers like Runx2 and DMP1 was detected, whilst DSP expression was observed in a dispersed manner, indicating an impaired odontogenic cell fate and failure in producing tubular dentine in cKO mice. CONCLUSIONS: Axin2+ cells are a critical population of primary odontoblasts which contribute to tubular secondary dentine formation, and BMP signalling pathway plays a vital role in maintaining the odontogenic fate of Axin2+ cells.

Development of Rat Caries-Induced Pulpitis Model for Vital Pulp Therapy.

Rodent animal models for vital pulp therapy are commonly used in dental research because their tooth anatomy and cellular processes are similar to the anatomy and processes in humans. However, most studies have been conducted using uninfected sound teeth, which makes it difficult to adequately assess the inflammatory shift after vital pulp therapy. In the present study, we aimed to establish a caries-induced pulpitis model based on the conventional rat caries model and then evaluate inflammatory changes during the wound-healing process after pulp capping in a model of reversible pulpitis induced by carious infection. To establish the caries-induced pulpitis model, the pulpal inflammatory status was investigated at different stages of caries progression by immunostaining targeted to specific inflammatory biomarkers. Immunohistochemical staining revealed that both Toll-like receptor 2 and proliferating cell nuclear antigen were expressed in moderate and severe caries-stimulated pulp, indicating that an immune reaction occurred at both stages of caries progression. M2 macrophages were predominant in moderate caries-stimulated pulp, whereas M1 macrophages were predominant in the severe caries-stimulated pulp. Pulp capping in teeth with moderate caries (i.e., teeth with reversible pulpitis) led to complete tertiary dentin formation within 28 d after treatment. Impaired wound healing was observed in teeth with severe caries (i.e., teeth with irreversible pulpitis). During the wound-healing process in reversible pulpitis after pulp capping, M2 macrophages were predominant at all time points; their proliferative capacity was upregulated in the early stage of wound healing compared with healthy pulp. In conclusion, we successfully established a caries-induced pulpitis model for studies of vital pulp therapy. M2 macrophages have an important role in the early stages of the wound-healing process in reversible pulpitis.

Localization of senescent cells under cavity preparations in rats and restoration of reparative dentin formation by senolytics.

Reparative dentin formed by dental cavity preparation (DCP) is frequently used in clinical operations and plays a pivotal role in pulp protection. Recent reports have shown that senescent cells induced by various stressors aggravate many diseases. They can be treated using senolytics, which are drugs that selectively eliminate senescent cells. However, the association between DCP, senescent cells, and senolytics remains unclear. In this study, we established a rat model of DCP and analyzed the spatiotemporal localization of senescent cells in the pulp. The results showed that p21- and p16-positive senescent cells appeared mostly around the pulp horn (PH) under DCP. Furthermore, administration of senolytics (dasatinib and quercetin) successfully eliminated these senescent cells, thereby restoring the volume of reparative dentin formation. These data indicate that senescent cells induced by DCP may hamper the formation of reparative dentin. Senescent cells may be targets for the development of new restorative dentistry therapies.

Biodegradation of an injectable treated dentin matrix hydrogel as a novel pulp capping agent for dentin regeneration.

BACKGROUND: A novel injectable mixture termed treated dentin matrix hydrogel (TDMH) has been introduced for restoring dentin defect in DPC. However, no study evaluated its physiological biodegradation. Therefore, the present study aimed to assess scaffold homogeneity, mechanical properties and biodegradability in vitro and in vivo and the regenerated dentin induced by TDMH as a novel pulp capping agent in human permanent teeth. METHODS: Three TDMH discs were weighted, and dry/wet ratios were calculated in four slices from each disc to evaluate homogeneity. Hydrogel discs were also analyzed in triplicate to measure the compressive strength using a universal testing machine. The in vitro degradation behavior of hydrogel in PBS at 37 °C for 2 months was also investigated by monitoring the percent weight change. Moreover, 20 intact fully erupted premolars were included for assessment of TDMH in vivo biodegradation when used as a novel injectable pulp capping agent. The capped teeth were divided into four equal groups according to extraction interval after 2-, 8-, 12- and 16-weeks, stained with hematoxylin-eosin for histological and histomorphometric evaluation. Statistical analysis was performed using F test (ANOVA) and post hoc test (p = 0.05). RESULTS: No statistical differences among hydrogel slices were detected with (p = 0.192) according to homogeneity. TDMH compression modulus was (30.45 ± 1.11 kPa). Hydrogel retained its shape well up to 4 weeks and after 8 weeks completely degraded. Histological analysis after 16 weeks showed a significant reduction in TDMH area and a simultaneous significant increase in the new dentin area. The mean values of TDMH were 58.8% ± 5.9 and 9.8% ± 3.3 at 2 and 16 weeks, while the new dentin occupied 9.5% ± 2.8 at 2 weeks and 82.9% ± 3.8 at 16 weeks. CONCLUSIONS: TDMH was homogenous and exhibited significant stability and almost completely recovered after excessive compression. TDMH generally maintained their bulk geometry throughout 7 weeks. The in vivo response to TDMH was characterized by extensive degradation of the hydrogel and dentin matrix particles and abundant formation of new dentin. The degradation rate of TDMH matched the rate of new dentin formation. TRIAL REGISTRATION: PACTR201901866476410: 30/1/2019.

SVCT2-GLUT1-mediated ascorbic acid transport pathway in rat dental pulp and its effects during wound healing.

Ascorbic acid (AA; vitamin C) plays a crucial role in the biosynthesis and secretion of collagen to produce the organic matrix of hard tissues. Nevertheless, the detailed mechanism by which AA induces reparative dentinogenesis is still unknown. This study aimed to investigate the pathway and function of AA during wound healing in a rat pulpotomy model. Sodium-dependent vitamin C transporter (SVCT) 2 and glucose transporter (GLUT) 1 were detected in odontoblasts, endothelial cells, and nerve fibers in normal pulp tissues. SVCT2 and GLUT1 were also expressed in odontoblast-like cells in pulpotomized tissues of Wistar rats, and immunopositive cells of SVCT2 were significantly increased at 5 days after pulpotomy (p < 0.05). By contrast, osteogenic disorder Shionogi (ODS) rats, which cannot generate AA, also expressed SVCT2 and GLUT1 in normal and wound healing conditions. However, in ODS rats, when compared with the AA-addition group, the formation of dentin bridges in the AA-loss group was not evident, a layer of osteopontin was significantly increased beneath the wound surface (p < 0.05), and alpha smooth muscle actin at the odontoblast-like cells observed along this layer was significantly increased (p < 0.05), but not Nestin. Moreover, the amounts of type 1 collagen generated in the reparative dentin and beneath the wound healing site were significantly diminished (p < 0.05). Macrophages expressing CD68 and CD206 increased beneath the wound site. Hence, AA may be involved in odontoblast-like cell differentiation and anti-inflammatory response during dental pulp wound healing. Our results provide new insights into the function of AA through SVCT2 and GLUT1 in reparative dentinogenesis and may help in developing new therapeutic targets for dental pulpal disease.

Wnt3a promotes odonto/osteogenic differentiation in vitro and tertiary dentin formation in a rat model.

AIM: To investigate the effect of Wnt3a on odonto/osteogenic differentiation of stem cells isolated from human exfoliated deciduous teeth (SHEDs) and reparative dentine formation in a rat model. METHODOLOGY: Stem cells isolated from human exfoliated deciduous teeth were cultured in media with Wnt3a (50-200 ng/ml). Wnt activation was confirmed by ß-catenin immunocytochemistry. Colony-forming unit assay (normalized percentage area), osteogenic gene expression analysis by real-time polymerase chain reaction and mineralization assays measured by the absorption at 540 nm were performed. Tertiary dentine formation in vivo was evaluated using 8-week-old, male Wistar rats. Cavities with pinpoint pulp exposure by a sharp instrument were prepared at the mesial surface of the first molars. Teeth were divided into (n = 6): (1) distilled water (negative control), (2) phosphate-buffered saline (PBS), (3) lithium chloride in DI (20 µM), and (4) Wnt3a in PBS (200 ng/ml). Collagen sponge was used as a scaffold. The cavity was sealed with glass ionomer restoration. Four weeks later, animals were euthanized by sodium pentobarbital (120 mg/kg body weight). Hard tissue formation was evaluated using micro-computerized tomography. Sixty consecutive slides from the initial plane were analysed and calculated as bone/dentine volume per total tissue volume. Paraffin sections (2 µm) were stained with haematoxylin and eosin and Masson's trichrome for morphological evaluation. Data are presented as the mean ± standard error. Mann-Whitney U test was used for two-group comparison. Kruskal Wallis followed by pairwise comparison was employed for three or more group comparisons. Statistical analysis was performed using GraphPad Prism 7. Differences were considered significant at p < .05. RESULTS: Wnt3a decreased SHEDs colony formation and increased OSX, BMP2, and DMP1 expression, corresponding to an increase in mineralization. Additionally, a significant increase in dentine/bone volume per total tissue volume was observed in Wnt3a treated defects. Dentine bridge formation at the exposure sites treated with Wnt3a demonstrated, while fibrous tissues were observed in the control. CONCLUSIONS: Wnt3a suppressed proliferation, increased osteogenic differentiation of SHEDs and promotes tertiary dentine formation. Wnt3a could be utilized as biological molecule for vital pulp therapy.

The effect of low-level laser on the quality of dentin barrier after capping with bioceramic material: A histomorphometric analysis.

The study aims to investigate the quality of dentin barriers and pulp reaction to EndoSequence Root Repair Material (ERRM) combined with low-level laser application. In eight dogs, pulps were exposed via class V, half of the samples received low-level diode laser at 870 nm. Thereafter, cavities were capped with fast-set or regular-set ERRM. The specimens were processed for histomorphological and immunohistochemical examination after 2 weeks and 2 months. Dentin bridges were observed in all samples, and 87.5% were complete. The low-level laser group had significantly more reparative dentin area than the non-lased group (p < 0.05). The dentin bridges were found to have an unprecedented tubularity of 43%-89%. Tiny dentin island formation was observed within the material particles. Initial mild-to-moderate inflammatory reactions were observed, which subsided after 2 months. RUNX2 and osteocalcin staining were evident for all samples at both time intervals. Low-level laser combined with bioactive ERRM is effective in inducing reparative dentin formation.

3D-printed microgels supplemented with dentin matrix molecules as a novel biomaterial for direct pulp capping.

OBJECTIVES: To develop a 3D-printed, microparticulate hydrogel supplemented with dentin matrix molecules (DMM) as a novel regenerative strategy for dental pulp capping. MATERIALS AND METHODS: Gelatin methacryloyl microgels (7% w/v) mixed with varying concentrations of DMM were printed using a digital light projection 3D printer and lyophilized for 2 days. The release profile of the DMM-loaded microgels was measured using a bicinchoninic acid assay. Next, dental pulp exposure defects were created in maxillary first molars of Wistar rats. The exposures were randomly capped with (1) inert material - negative control, (2) microgels, (3) microgels + DMM 500 µg/ml, (4) microgels + DMM 1000 µg/ml, (5) microgels + platelet-derived growth factor (PDGF 10 ng/ml), or (6) MTA (n = 15/group). After 4 weeks, animals were euthanized, and treated molars were harvested and then processed to evaluate hard tissue deposition, pulp tissue organization, and blood vessel density. RESULTS: All the specimens from groups treated with microgel + 500 µg/ml, microgel + 1000 µg/ml, microgel + PDGF, and MTA showed the formation of organized pulp tissue, tertiary dentin, newly formed tubular and atubular dentin, and new blood vessel formation. Dentin bridge formation was greater and pulp necrosis was less in the microgel + DMM groups compared to MTA. CONCLUSIONS: The 3D-printed photocurable microgels doped with DMM exhibited favorable cellular and inflammatory pulp responses, and significantly more tertiary dentin deposition. CLINICAL RELEVANCE: 3D-printed microgel with DMM is a promising biomaterial for dentin and dental pulp regeneration in pulp capping procedures.

Novel Functional Peptide for Next-Generation Vital Pulp Therapy.

Although vital pulp therapy should be performed by promoting the wound-healing capacity of dental pulp, existing pulp-capping materials were not developed with a focus on the pulpal repair process. In previous investigations of wound healing in dental pulp, we found that organic dentin matrix components (DMCs) were degraded by matrix metalloproteinase-20, and DMC degradation products containing protein S100A7 (S100A7) and protein S100A8 (S100A8) promoted the pulpal wound-healing process. However, the direct use of recombinant proteins as pulp-capping materials may cause clinical problems or lead to high medical costs. Thus, we hypothesized that functional peptides derived from recombinant proteins could solve the problems associated with direct use of such proteins. In this study, we identified functional peptides derived from the protein S100 family and investigated their effects on dental pulp tissue. We first performed amino acid sequence alignments of protein S100 family members from several mammalian sources, then identified candidate peptides. Next, we used a peptide array method that involved human dental pulp stem cells (hDPSCs) to evaluate the mineralization-inducing ability of each peptide. Our results supported the selection of 4 candidate functional peptides derived from proteins S100A8 and S100A9. Direct pulp-capping experiments in a rat model demonstrated that 1 S100A8-derived peptide induced greater tertiary dentin formation compared with the other peptides. To investigate the mechanism underlying this induction effect, we performed liquid chromatography-tandem mass spectrometry analysis using hDPSCs and the S100A8-derived peptide; the results suggested that this peptide promotes tertiary dentin formation by inhibiting inflammatory responses. In addition, this peptide was located in a hairpin region on the surface of S100A8 and could function by direct interaction with other molecules. In summary, this study demonstrated that a S100A8-derived functional peptide promoted wound healing in dental pulp; our findings provide insights for the development of next-generation biological vital pulp therapies.

Temporospatial Expression of Neuropeptide Substance P in Dental Pulp Stem Cells During Odontoblastic Differentiation in Vitro and Reparative Dentinogenesis in Vivo.

INTRODUCTION: Substance P (SP) is a neuropeptide released from the nervous fibers in response to injury. In addition to its association with pain and reactions to anxiety and stress, SP exerts various physiological functions by binding to the neurokinin-1 receptor (NK1R). However, the expression and role of SP in reparative dentinogenesis remain elusive. Here, we explored whether SP is involved in odontoblastic differentiation during reparative dentinogenesis. METHODS: Dental pulp stem cells (DPSCs) were isolated from healthy human dental pulp tissues and subjected to odontoblastic differentiation. The expression of SP and NK1R during odontoblastic differentiation was investigated in vitro. The effects of SP on odontoblastic differentiation of DPSCs were evaluated using alizarin red staining, alkaline phosphatase staining, and real-time polymerase chain reaction. After direct pulp capping with mineral trioxide aggregate, the expression of SP and NK1R during reparative dentin formation in rats were identified using histological and immunohistochemical staining. RESULTS: SP and NK1R expression increased during the odontoblastic differentiation of DPSCs. SP translocated to the nucleus when DPSCs were exposed to differentiation medium. NK1R was always present in the nuclei of DPSCs and odontoblast-like cells. Additionally, we discovered that 10-8 M SP marginally enhanced the odontoblastic differentiation of DPSCs, and that these effects could be impaired by the NK1R antagonist. Furthermore, SP and NK1R were expressed in odontoblast-like and dental pulp cells during reparative dentin formation in vivo. CONCLUSIONS: SP contributes to odontoblastic differentiation during reparative dentin formation by binding to the NK1R.

Radiographic evaluation of secondary dentin formation in lower premolars for forensic age diagnosis of 18 years in a sample of south Indian adolescents and young adults.

There has been an increase in the need for alternate methods of dental age assessment, especially for the forensic age diagnosis of the 18th year of life. This is due to the completion of the third molar development before 18 years or the agenesis or therapeutic extractions of the third molars. The present study aimed to verify whether the secondary dentin formation in lower premolars can be used to determine the completion of the 18th year of life in a sample of South Indian adolescents and young adults. For this purpose, 800 orthopantomograms of 400 male and 400 female South Indian subjects aged 14- 22 were evaluated. The characteristics of the secondary dentin formation were determined in all mandibular premolars using the stage classification according to Olze et al (Int J Legal Med 126(4):615-21). The results showed that when stage 3 of secondary dentin formation was reached in the first premolars, the probability of the subject completing the 18th year of life was very high. However, only a few individuals in the studied population were at stage 3. Therefore, proceeding cautiously with this degenerative change in lower premolars is advised due to the higher inter-examiner differences. It is also recommended to use this method in conjunction with other age estimation methods. Further research should investigate other degenerative characteristics in the studied population.

Age Estimation Using Maxillary Central Incisor Analysis on Cone Beam Computed Tomography Human Images.

Forensic dentistry plays an important role in human identification, and dental age estimation is an important part of the process. Secondary dentin deposition throughout an individual's lifetime and consequent modification in teeth anatomy is an important parameter for age estimation procedures. The aim of the present study was to develop regression equations to determine age in adults by means of linear measurements and ratios on sagittal, coronal and axial slices of maxillary central incisors using cone bean computed tomography (CBCT). Multiplanar measurements of upper central incisors were taken for a sample of 373 CBCTs. Subsequently, one-way analysis of variance (ANOVA) and multivariate linear regressions were performed for age estimation. The equations obtained from axial linear measurements and ratios presented a standard error of the estimate (SEE) of ±10.9 years (R2 = 0.49), and a SEE of ±10.8 years (R2 = 0.50), respectively. The equation obtained for multiplanar linear measurements presented a SEE of ±10.9 years (R2 = 0.52), while the equation for multiplanar ratios presented a SEE of ±10.7 years (R2 = 0.51). Thus, CBCT measurements on upper central incisors were found to be an acceptable method for age estimation. Horizontal measurements, especially pulp measurements, improve the accuracy of age estimate equations.