CT Cadaveric dataset for Radiomics features stability assessment in lumbar vertebrae.

Radiomics features (RFs) studies have showed limitations in the reproducibility of RFs in different acquisition settings. To date, reproducibility studies using CT images mainly rely on phantoms, due to the harness of patient exposure to X-rays. The provided CadAIver dataset has the aims of evaluating how CT scanner parameters effect radiomics features on cadaveric donor. The dataset comprises 112 unique CT acquisitions of a cadaveric truck acquired on 3 different CT scanners varying KV, mA, field-of-view, and reconstruction kernel settings. Technical validation of the CadAIver dataset comprises a comprehensive univariate and multivariate GLM approach to assess stability of each RFs extracted from lumbar vertebrae. The complete dataset is publicly available to be applied for future research in the RFs field, and could foster the creation of a collaborative open CT image database to increase the sample size, the range of available scanners, and the available body districts.

Does a novel 3D printed individualized guiding template based on cutaneous fiducial markers contribute to accurate percutaneous insertion of pelvic screws? A preliminary phantom and cadaver study.

BACKGROUND: Most 3D-printed guiding templates require dissection of soft tissues to match the corresponding surfaces of the guiding templates. This study sought to explore the accuracy and acceptability of the novel 3D printed individualized guiding templates based on cutaneous fiducial markers in minimally invasive screw placement for pelvic fractures. METHODS: The printed template was tested on five high-fidelity biomimetic phantom models of the bony pelvis and its surrounding soft tissues as well as on two fresh frozen cadavers. Four cutaneous fiducial markers were transfixed on each phantom model prior to performing CT scans to reconstruct their 3D models. Personalized templates for guiding screw insertion were designed based on the positions of the fiducial markers and virtually planned target screw channels after scanning, followed by 3D printing of the guide. Phase 1 consisted of five expert surgeons inserting one anterograde supra-pubic screw and one sacroiliac screw percutaneously into each phantom model using the 3D-printed guide. The deviation of screw positions between the pre-operative planned and post-operative actual ones was measured after registering their 3D modelling. A Likert scale questionnaire was completed by the expert surgeons to assess their satisfaction and acceptability with the guiding template. Phase 2 consisted of repeating the same procedures on the fresh frozen cadavers in order to demonstrate face, content and concurrent validity. RESULTS: In Phase 1, all ten screws were successfully implanted with the assistance of the guiding template. Postoperative CT scans confirmed that all screws were safely positioned within the bony pelvic channels without breaching the far cortex. The mean longitudinal deviation at the bony entry point and screw tip between the pre-operative planned and post-operative actual screw paths were 2.83 ± 0.60 mm and 3.12 ± 0.81 mm respectively, with a mean angular deviation of 1.25 ± 0.41°. Results from the Likert questionnaire indicated a high level of satisfaction for using the guiding template among surgeons. In Phase 2, results were similar to those in Phase 1. CONCLUSIONS: The 3D-printed guiding template based on cutaneous fiducial markers shows potential for assisting in the accurate insertion of percutaneous screws in the pelvis.

Anatomical variants of the intercostobrachial nerve and its preservation during surgery, a systematic review and meta-analysis.

BACKGROUND: The anatomic variants of the intercostobrachial nerve (ICBN) represent a potential risk of injuries during surgical procedure such as axillary lymph node dissection and sentinel lymph node biopsy in breast cancer and melanoma patients. The aim of this systematic review and meta-analysis was to investigate the different origins and branching patterns of the intercostobrachial nerve also providing an analysis of the prevalence, through the analysis of the literature available up to September 2023. MATERIALS AND METHODS: The protocol for this study was registered on PROSPERO (ID: CRD42023447932), an international prospective database for reviews. The PRISMA guideline was respected throughout the meta-analysis. A systematic literature search was performed using PubMed, Scopus and Web of Science. A search was performed in grey literature through google. RESULTS: We included a total of 23 articles (1,883 patients). The prevalence of the ICBN in the axillae was 98.94%. No significant differences in prevalence were observed during the analysis of geographic subgroups or by study type (cadaveric dissections and in intraoperative dissections). Only five studies of the 23 studies reported prevalence of less than 100%. Overall, the PPE was 99.2% with 95% Cis of 98.5% and 99.7%. As expected from the near constant variance estimates, the heterogeneity was low, I2 = 44.3% (95% CI 8.9%-65.9%), Q = 39.48, p = .012. When disaggregated by evaluation type, the difference in PPEs between evaluation types was negligible. For cadaveric dissection, the PPE was 99.7% (95% CI 99.1%-100.0%) compared to 99.0% (95% CI 98.1%-99.7%). CONCLUSIONS: The prevalence of ICBN variants was very high. The dissection of the ICBN during axillary lymph-node harvesting, increases the risk of sensory disturbance. The preservation of the ICBN does not modify the oncological radicality in axillary dissection for patients with cutaneous metastatic melanoma or breast cancer. Therefore, we recommend to operate on these patients in high volume center to reduce post-procedural pain and paresthesia associated with a lack of ICBN variants recognition.

A quantitative comparative surgical analysis of the endoscopic transorbital approach and frontotemporal-orbitozygomatic approach for extradural exposure of the cavernous sinus.

OBJECTIVE: Recently, the endoscopic superior eyelid transorbital approach (SETA) has emerged as a potential alternative to access the cavernous sinus (CS). Several previous studies have attempted to quantitatively compare the traditional open anterolateral skull base approaches with transorbital exposure; however, these comparisons have been limited to the area of exposure provided by the bone opening and trajectory, and fail to account for the main avenues of exposure provided by subsequent requisite surgical maneuvers. The authors quantitatively compare the surgical access provided by the frontotemporal-orbitozygomatic (FTOZ) approach and the SETA following applicable periclinoid surgical maneuvers, evaluate the surgical exposure of key structures in each, and discuss optimal approach selection. METHODS: SETA and FTOZ approaches were performed with subsequent applicable surgical maneuvers on 8 cadaveric heads. The lengths of exposure of cranial nerves (CNs) II-VI and the cavernous internal carotid artery; the areas of the space accessed within the supratrochlear, infratrochlear, and supramaxillary (anteromedial) triangles; the total area of exposure; and the angles of attack were measured and compared. RESULTS: Exposure of the extradural CS was comparable between approaches, whereas access was significantly greater in the FTOZ approach compared with the SETA. The lengths of extradural exposure of CN III, V1, V2, and V3 were comparable between approaches. The FTOZ approach provided marginally increased exposure of CNs IV (20.9 ± 2.36 mm vs 13.4 ± 3.97 mm, p = 0.023) and VI (14.1 ± 2.44 mm vs 9.22 ± 3.45 mm, p = 0.066). The FTOZ also provided significantly larger vertical (44.5° ± 6.15° vs 18.4° ± 1.65°, p = 0.002) and horizontal (41.5° ± 5.40° vs 15.3° ± 5.06°, p < 0.001) angles of attack, and thus significantly greater surgical freedom, and provided significantly greater access to the supratrochlear (p = 0.021) and infratrochlear (p = 0.007) triangles, and significantly greater exposure of the cavernous internal carotid artery (17.2 ± 1.70 mm vs 8.05 ± 2.37 mm, p = 0.001). Total area of exposure was also significantly larger in the FTOZ, which provided wide access to the lateral wall of the CS as well as the possibility for intradural access. CONCLUSIONS: This is the first study to quantitatively identify the relative advantages of the FTOZ and transorbital approaches at the target region following requisite surgical maneuvers. Understanding these data will aid in selecting an optimal approach and maneuver set based on target lesion size and location.

Transpalpebral mini-orbitozygomatic approach for nonvascular skull base lesions: a single neurosurgeon's experience.

OBJECTIVE: The authors aim to describe the advantages, utility, and disadvantages of the transpalpebral mini-orbitozygomatic (MOZ) approach for tumors of the lateral and superior orbit, orbital apex, anterior clinoid, anterior cranial fossa, middle cranial fossa, and parasellar region. METHODS: The surgical approach from skin incision to closure is described while highlighting key technical and anatomical considerations, and cadaveric dissection demonstrates the surgical steps and focuses on important anatomy. Intraoperative images were included to supplement the cadaveric dissection. A retrospective review of adults who had undergone the MOZ approach for nonvascular pathology performed by a single neurosurgeon from 2017 to 2023 was included in this institutional review board-approved study. Descriptive statistics was used to summarize the data. Four representative cases were included to demonstrate the utility of the MOZ approach. RESULTS: The study included 65 patients (46 female, 19 male), average age 54.84 years, who had undergone transpalpebral MOZ surgery. Presenting symptoms included visual changes (53.8% of cases), vision loss (23.1%), diplopia (21.8%), and proptosis (13.8%). The optic nerve and optic chiasm were involved in 32.3% and 10.8% of cases, respectively. The most common pathology was meningioma (81.5% of cases), and gross-total resection was achieved in 50% of all cases. Major complications included an infection and a carotid injury. Improvement of preoperative symptoms was reported in 92.2% of cases. Visual acuity improved in 12 patients. The mean follow-up was 8.57 ± 8.45 months. CONCLUSIONS: The MOZ approach is safe and durable. The transpalpebral incision provides better cosmesis and functional outcomes than those of standard anterolateral approaches to the skull base. Careful consideration of the limits of the approach is paramount to appropriate application on a case-by-case basis. Further quantitative anatomical studies can help to define and compare the utility of the approach to open cranio-orbital and endoscopic transorbital approaches.

Open-door extended endoscopic transorbital technique to the paramedian anterior and middle cranial fossae: technical notes, anatomomorphometric quantitative analysis, and illustrative case.

OBJECTIVE: The superior eyelid endoscopic transorbital approach (SETOA) provides a direct and short minimally invasive route to the anterior and middle skull base. Nevertheless, it uses a narrow corridor that limits its angles of attack. The aim of this study was to evaluate the feasibility and potential benefits of an "extended" conservative variant of the "standard" endoscopic transorbital approach-termed "open-door"-to enhance the exposure of lesions affecting the paramedian aspect of the anterior and middle cranial fossae. METHODS: First, the authors described the technical nuances of the open-door extended transorbital approach (ODETA). Next, they documented its morphometric advantages over standard SETOA. Finally, they provided a clinical-anatomical application to demonstrate enhanced exposure and better angles of attack to treat lesions occupying the paramedian anterior and middle cranial fossae. Five adult cadaveric specimens (10 sides) initially underwent standard SETOA and then extended open-door SETOA (ODETA to the paramedian anterior and middle fossae). The adjunct of hinge-orbitotomy, through three surgical steps and straddling the frontozygomatic suture, converted conventional SETOA to its extended open-door variant. CT scans were performed before dissection and uploaded to the neuronavigation system for quantitative analysis. The angles of attack on the axial plane that addressed four key landmarks, namely the tip of the anterior clinoid process (ACP), foramen rotundum (FR), foramen ovale (FO), and trigeminal impression (TI), were calculated for both operative techniques and compared. RESULTS: Hinge-orbitotomy of the extended open-door SETOA resulted in several surgical, functional, and esthetic advantages: it provided wider axial angles of attack for each of the target points, with a gain angle of 26.68° ± 1.31° for addressing the ACP (p < 0.001), 29.50° ± 2.46° for addressing the FR (p < 0.001), 19.86° ± 1.98° for addressing the FO (p < 0.001), and 17.44° ± 2.21° for addressing the lateral aspect of the TI (p < 0.001), while hiding the skin scar, avoiding temporalis muscle dissection, preserving flap vascularization, and decreasing the rate of bone infection and degree of orbital content retraction. CONCLUSIONS: The extended open-door technique may be specifically suited for selected patients affected by paramedian anterior and middle fossae lesions, with prevalent anteromedial extension toward the anterior clinoid, the foremost compartment of the cavernous sinus and FR and not completely controlled with the pure endoscopic transorbital approach.

Anterolateral keyhole transorbital routes to the skull base: a comparative anatomical study.

OBJECTIVE: Although keyhole transorbital approaches are gaining traction, their indications have not been adequately studied comparatively. In this study the authors have defined them also as transwing approaches-meaning that they use the different facies of the sphenoid wing for cranial entry-and sought to compare the four major ones: 1) lateral orbitocraniotomy through a lateral canthal incision (LatOrb); 2) modified orbitozygomatic approach through a palpebral incision (ModOzPalp); 3) modified orbitozygomatic approach through an eyebrow incision (ModOzEyB); and 4) supraorbital craniotomy through an eyebrow incision (SupraOrb), coupled with its expanded version (SupraTransOrb). METHODS: Cadaveric dissections were performed at the neuroanatomy lab. To delineate the skull base exposure, four formalin-fixed heads were used, with two sides dedicated to each approach. The outer limits were assessed via image guidance and were mapped and illustrated accordingly. A fifth head was dissected purely endoscopically, just to facilitate an overview of the transwing concept. Qualitative features were also rigorously examined. RESULTS: The LatOrb proves to be more versatile in the middle cranial fossa (MCF), whereas the anterior cranial fossa (ACF) exposure is limited to a small area above the sphenoid ridge. An anterior clinoidectomy is possible; however, the exposure of the roof of the optic canal is suboptimal. The ModOzPalp adequately exposes both the ACF and MCF. Its lateral trajectory allows the inferior to superior view, yet there is restricted access to the medial anterior skull base (olfactory groove). The ModOzEyB also provides extensive exposure of the ACF and MCF, but has a more superior to inferior trajectory compared to the ModOzPalp, making it more appropriate for pathology reaching the medial anterior skull base or even the contralateral side. The anterior clinoidectomy is performed with improved visualization of the optic canal. The SupraOrb provides mainly anterior cranial base exposure, with minimal middle fossa. An anterior clinoidectomy can be performed, but without any direct observation of the superior orbital fissure. Some MCF access can be accomplished if the lateral sphenoid wing is drilled inferiorly, leading to its highly versatile variant, the SupraTransOrb. CONCLUSIONS: All the aforementioned approaches use the sphenoid wing as skull base corridor from a specific orientation point; hence these are designated as transwing approaches. Their peculiarities mandate careful case selection for the effective and safe completion of the surgical goals.

360° around the orbit: key surgical anatomy of the microsurgical and endoscopic cranio-orbital and orbitocranial approaches.

OBJECTIVE: Several pathologies either invade or arise within the orbit. These include meningiomas, schwannomas, and cavernous hemangiomas among others. Although several studies describing various approaches to the orbit are available, no study describes all cranio-orbital and orbitocranial approaches with clear, surgically oriented anatomical descriptions. As such, this study aimed to provide a comprehensive guide to the microsurgical and endoscopic approaches to and through the orbit. METHODS: Six formalin-fixed, latex-injected cadaveric head specimens were dissected in the surgical anatomy laboratory at the authors' institution. In each specimen, the following approaches were modularly performed: endoscopic transorbital approaches (ETOAs), including a lateral transorbital approach and a superior eyelid crease approach; endoscopic endonasal approaches (EEAs), including those to the medial orbit and optic canal; and transcranial approaches, including a supraorbital approach, a fronto-orbital approach, and a 3-piece orbito-zygomatic approach. Each pertinent step was 3D photograph-documented with macroscopic and endoscopic techniques as previously described. RESULTS: Endoscopic endonasal approaches to the orbit afforded excellent access to the medial orbit and medial optic canal. Regarding ETOAs, the lateral transorbital approach afforded excellent access to the floor of the middle fossa and, once the lateral orbital rim was removed, the cavernous sinus could be dissected and the petrous apex drilled. The superior eyelid approach provides excellent access to the anterior cranial fossa just superior to the orbit, as well as the dura of the lesser wing of the sphenoid. Craniotomy-based approaches provided excellent access to the anterior and middle cranial fossa and the cavernous sinus, except the supraorbital approach had limited access to the middle fossa. CONCLUSIONS: This study outlines the essential surgical steps for major cranio-orbital and orbitocranial approaches. Endoscopic endonasal approaches offer direct medial access, potentially providing bilateral exposure to optic canals. ETOAs serve as both orbital access and as a corridor to surrounding regions. Cranio-orbital approaches follow a lateral-to-medial, superior-to-inferior trajectory, progressively allowing removal of protective bony structures for proportional orbit access.

Endoscopic precaruncular medial transorbital and endonasal multiport approaches to the contralateral skull base: a clinicoanatomical study.

OBJECTIVE: Minimally invasive endoscopic endonasal multiport approaches create additional visualization angles to treat skull base pathologies. The sublabial contralateral transmaxillary (CTM) approach and superior eyelid lateral transorbital approach, frequently used nowadays, have been referred to as the "third port" when used alongside the endoscopic endonasal approach (EEA). The endoscopic precaruncular contralateral medial transorbital (cMTO) corridor, on the other hand, is an underrecognized but unique port that has been used to repair CSF rhinorrhea originating from the lateral sphenoid sinus recess. However, no anatomical feasibility studies or clinical experience exists to assess its benefits and demonstrate its potential role in multiport endoscopic access to the other contralateral skull base areas. In this study, the authors explored the application and potential utility of multiport EEA combined with the endoscopic cMTO approach (EEA/cMTO) to three target areas of the contralateral skull base: lateral recess of sphenoid sinus (LRSS), petrous apex (PA) and petroclival region, and retrocarotid clinoidocavernous space (CCS). METHODS: Ten cadaveric specimens (20 sides) were dissected bilaterally under stereotactic navigation guidance to access contralateral LRSS via EEA/cMTO. The PA and petroclival region and retrocarotid CCS were exposed via EEA alone, EEA/cMTO, and EEA combined with the sublabial CTM approach (EEA/CTM). Qualitative and quantitative assessments, including working distance and visualization angle to the PA, were recorded. Clinical application of EEA/cMTO is demonstrated in a lateral sphenoid sinus CSF leak repair. RESULTS: During the qualitative assessment, multiport EEA/cMTO provides superior visualization from a high vantage point and better instrument maneuverability than multiport EEA/CTM for the PA and retrocarotid CCS, while maintaining a similar lateral trajectory. The cMTO approach has significantly shorter working distances to all three target areas compared with the CTM approach and EEA. The mean distances to the LRSS, PA, and retrocarotid CCS were 50.69 ± 4.28 mm (p < 0.05), 67.11 ± 5.05 mm (p < 0.001), and 50.32 ± 3.6 mm (p < 0.001), respectively. The mean visualization angles to the PA obtained by multiport EEA/cMTO and EEA/CTM were 28.4° ± 3.27° and 24.42° ± 5.02° (p < 0.005), respectively. CONCLUSIONS: Multiport EEA/cMTO to the contralateral LRSS offers the advantage of preserving the pterygopalatine fossa contents and the vidian nerve, which are frequently sacrificed during a transpterygoid approach. This approach also offers superior visualization and better instrument maneuverability compared with EEA/CTM for targeting the petroclival region and retrocarotid CCS.

Evaluation of the MMI Symani® robotic microsurgical system for coronary-bypass anastomoses in a cadaveric porcine model.

The MMI Symani® is a recently approved robotic microsurgical system for surgical procedures in adults. The system enables the surgeon to create microanastomoses. Clinical applications so far include lymphatic vessels surgery and the creation of special flap plastics. The use of the system in coronary arteries has not yet been assessed. The aim of this preclinical study was to evaluate the applicability of the Symani® surgical system in the creation of coronary anastomoses a cadaveric porcine model. A total of 12 anastomoses were performed by three senior cardiovascular surgeons on the left main coronary artery of three porcine hearts. Artificial bypasses (diameter 1 mm) were performed to the left main trunk. The anastomoses were performed with the Symani® surgical system. Evaluation included procedure times and anastomosis leakage. All anastomoses could be successfully performed. The procedure time decreased due to the learning curve between the first anastomosis 47:28 ± 5:30 min and the last anastomosis 22:37 ± 3:25 min. The final evaluation of the anastomoses showed excellent results with low leakage. The quality of the anastomosis also improved in relation to the increasing learning curve. The Symani® surgical system could be used to create coronary anastomoses in an acceptable time frame and without technical failures. Hence, the system appears feasible for conventional coronary surgery. Further studies in animal models are mandatory prior to clinical application.

Craniovertebral Junction Surgical Approaches: State of Art.

Surgical approaches directed toward craniovertebral junction (CVJ) can be addressed to the ventral, dorsal, and lateral aspects through a variety of 360° surgical corridors Herein, we report features, advantages, and limits of the updated technical support in CVJ surgery in clinical setting and dissection laboratories enriched by our preliminary surgical results of the simultaneous application of O-arm intraoperative neuronavigation and imaging system along with the 3D-4K EX in TOA for the treatment of CVJ pathologies.In the past 4 years, eight patients harboring CVJ compressive pathologies underwent one-step combined anterior neurosurgical decompression and posterior instrumentation and fusion technique with the aid of exoscope and O-arm. In our equipped Cranio-Vertebral Junction Laboratory, we use fresh cadavers (and injected "head and neck" specimens) whose policy, protocols, and logistics have already been elucidated in previous works. Five fresh-frozen adult specimens were dissected adopting an FLA. In these specimens, a TOA was also performed, as well as a neuronavigation-assisted comparison between transoral and transnasal explorable distances.A complete decompression along with stable instrumentation and fusion of the CVJ was accomplished in all the cases at the maximum follow-up (mean: 25.3 months). In two cases, the O-arm navigation allowed the identification of residual compression that was not clearly visible using the microscope alone. In four cases, it was not possible to navigate C1 lateral masses and C2 isthmi due to the angled projection unfitting with the neuronavigation optical system, so misleading the surgeon and strongly suggesting changing surgical strategy intraoperatively. In another case (case 4), it was possible to navigate and perform both C1 lateral masses and C2 isthmi screwing, but the screw placement was suboptimal at the immediate postoperative radiological assessment. In this case, the hardware displacement occurred 2 months later requiring reoperation.

Gross, organoleptic and histologic assessment of cadaveric equine heads preserved using chemical methods for veterinary surgical teaching.

BACKGROUND: Preservation of biological tissues has been used since ancient times. Regardless of the method employed, tissue preservation is thought to be a vital step in veterinary surgery teaching and learning. OBJECTIVES: This study was designed to determine the usability of chemically preserved cadaveric equine heads for surgical teaching in veterinary medicine. METHODS: Six cadaveric equine heads were collected immediately after death or euthanasia and frozen until fixation. Fixation was achieved by using a hypertonic solution consisting of sodium chloride, sodium nitrite and sodium nitrate, and an alcoholic solution containing ethanol and glycerin. Chemically preserved specimens were stored at low temperatures (2°C to 6°C) in a conventional refrigerator. The specimens were submitted to gross and organoleptic assessment right after fixative solution injection (D0) and within 10, 20, and 30 days of fixation (D10, D20, and D30, respectively). Samples of tissue from skin, tongue, oral vestibule, and masseter muscle were collected for histological evaluation at the same time points. RESULTS: Physical and organoleptic assessments revealed excellent specimen quality (mean scores higher than 4 on a 5-point scale) in most cases. In some specimens, lower scores (3) were assigned to the range of mouth opening, particularly on D0 and D10. A reduced the range of mouth opening may be a limiting factor in teaching activities involving structures located in the oral cavity. CONCLUSIONS: The excellent physical, histologic, and organoleptic characteristics of the specimens in this sample support their usability in teaching within the time frame considered. Appropriate physical and organoleptic characteristics (color, texture, odor, and flexibility) of the specimens in this study support the use of the method described for preparation of reusable anatomical specimens.

Morphology of the aortic arch branching pattern in raccoon dogs (Nyctereutes procyonoides, Gray, 1834).

BACKGROUND: Aortic arch (AA) branching patterns vary among different mammalian species. Most previous studies have focused on dogs, whereas those on raccoon dogs remain unexplored. OBJECTIVES: The objective of this study was to describe the AA branching pattern in raccoon dogs and compare their morphological features with those of other carnivores. METHODS: We prepared silicone cast specimens from a total of 36 raccoon dog carcasses via retrograde injection through the abdominal aorta. The brachiocephalic trunk (BCT) branching patterns were classified based on the relationship between the left and right common carotid arteries. The subclavian artery (SB) branching pattern was examined based on the order of the four major branches: the vertebral artery (VT), costocervical trunk (CCT), superficial cervical artery (SC), and internal thoracic artery (IT). RESULTS: In most cases (88.6%), the BCT branched off from the left common carotid artery and terminated in the right common carotid and right subclavian arteries. In the remaining cases (11.4%), the BCT formed a bicarotid trunk. The SB exhibited various branching patterns, with 26 observed types. Based on the branching order of the four major branches, we identified the main branching pattern, in which the VT branched first (98.6%), the CCT branched second (81.9%), the SC branched third (62.5%), and the IT branched fourth (52.8%). CONCLUSIONS: The AA branching pattern in raccoon dogs exhibited various branching patterns with both similarities and differences compared to other carnivores.

Evaluating the effect of pulse energy on femtosecond laser trabeculotomy (FLT) outflow channels for glaucoma treatment in human cadaver eyes.

BACKGROUND AND OBJECTIVES: Femtosecond laser trabeculotomy (FLT) creates aqueous humor outflow channels through the trabecular meshwork (TM) and is an emerging noninvasive treatment for open-angle glaucoma. The purpose of this study is to investigate the effect of pulse energy on outflow channel creation during FLT. MATERIALS AND METHODS: An FLT laser (ViaLase Inc.) was used to create outflow channels through the TM (500 µm wide by 200 µm high) in human cadaver eyes using pulse energies of 10, 15, and 20 µJ. Following treatment, tissues were fixed in 4% paraformaldehyde. The channels were imaged using optical coherence tomography (OCT) and assessed as full thickness, partial thickness, or not observable. RESULTS: Pulse energies of 15 and 20 µJ had a 100% success rate in creating full-thickness FLT channels as imaged by OCT. A pulse energy of 10 µJ resulted in no channels (n = 6), a partial-thickness channel (n = 2), and a full-thickness FLT channel (n = 2). There was a statistically significant difference in cutting widths between the 10 and 15 µJ groups (p < 0.0001), as well as between the 10 and 20 µJ groups (p < 0.0001). However, there was no statistically significant difference between the 15 and 20 µJ groups (p = 0.416). CONCLUSIONS: Fifteen microjoules is an adequate pulse energy to reliably create aqueous humor outflow channels during FLT in human cadaver eyes. OCT is a valuable tool when evaluating FLT.

[Advances in clinical anatomy of the transnasal approaches to the parapharyngeal segment of the internal carotid artery].

The intracranial segment of the internal carotid artery located inside the skeleton structure of skull base or inside the skull has clear anatomical landmarks and fixed anatomical structure. However, the parapharyngeal segment of the internal carotid artery located outside the cranial is surrounded by soft tissues, lacks clear and recognizable anatomical landmarks and sometimes has anatomical variation, which is closely related to transnasal endoscopic surgery. Intraoperative accidental injury can lead to serious complications or even death. Currently, clinical anatomical studies related to the parapharyngeal segment of the internal carotid artery under transnasal endoscopic surgery mainly focus on its anatomical variation and anatomical landmarks. This article reviews on these two aspects in order to provide anatomical reference for surgeons to reduce surgical risks during transnasal endoscopic surgery.

The lateral retrocanthal transorbital endoscopic approach to the middle fossa: cadaveric stepwise approach and review of quantitative cadaveric data.

OBJECTIVE: The lateral retrocanthal transorbital endoscopic approach (LRCTEA) facilitates trajectory to the middle fossa, preserving the lateral canthal tendon and thus avoiding postoperative complications such as eyelid malposition. Here, the authors sought to define the surgical anatomy and technique of LRCTEA using a stepwise approach in cadaveric heads and offer an in-depth examination of existing quantitative data from cadaveric studies. METHODS: The authors performed LRCTEA to the middle cranial fossa under neuronavigation in 7 cadaveric head specimens that underwent high-resolution (1-mm) CT scans preceding the dissections. RESULTS: The LRCTEA provided access to middle fossa regions including the cavernous sinus, Meckel's cave, and medial temporal lobe. The trajectories and endpoints of the approach were confirmed using electromagnetic neuronavigation. A stepwise approach was delineated and recorded. CONCLUSIONS: The authors' cadaveric study delineates the surgical anatomy and technique of the LRCTEA, providing a stepwise approach for its implementation. As these approaches continue to evolve, their development and refinement will play an important role in expanding the surgical options available to neurosurgeons, ultimately improving outcomes for patients with complex skull base pathologies. The LRCTEA presents a promising advancement in skull base surgery, particularly for accessing challenging middle fossa regions. However, surgeons must remain vigilant to potential complications, including transient diplopia, orbital hematoma, or damage to the optic apparatus.

Cadaveric study of the ultrasound-guided erector spinae plane block over the transverse process of the twelfth thoracic vertebra in dogs: Transversal vs longitudinal approach.

This study describes a transversal (TV) ultrasound-guided erector spinae plane (ESP) block technique over the transverse process of T12. And evaluates the distribution of the dye and affected nerves branches compared to a longitudinal (LNG) approach over the transverse process of T12 in canine cadavers. Secondly, it also compares de anatomy and dimensions of the transverse processes of T12 with T9 and T5. For this double-masked, cadaveric experimental study, 12 adult Beagle cadavers were injected with 0.6 mL/kg of dye/contrast. Spread was evaluated by computed tomography (CT) and dissection. Mean bodyweight was 9.76 (±0.59) kg. The TV and LNG approaches stained a median (range) of four (2-6) and three (1-6) medial branches of the dorsal rami of the spinal nerves, three (2-6) and three (2-5) lateral branches, and one (0-3) and one (0-4) ventral branches, respectively. Dye was detected in the epidural space in 55.6% and 66.7% of cases for the TV and LNG approaches, respectively (P=0.63). And in the ventral paravertebral compartment in 22.2% and lymphatics in 88.8% in both approaches. There were no statistical differences for the spread. The dorsolateral edge of the transverse process (TP) was not visible with CT at T12. The mean (±SD) length of the TP was significantly shorter at T12 [3.34 (±0.22)] mm, compared to T9 [6.08 (±0.47)] mm and T5 [5.93 (±0.62)] mm (P <0.001). This study showed similar distribution whether using a TV or LNG approach and differences in the anatomy and length of the T12 TP.

Intraoperative lateral wall breach simulation in the cadaveric spine and the impact of thread designs of screws on pullout strength in the osteoporotic thoracic vertebrae: A biomechanical study in human cadavers.

OBJECTIVE: This study aimed (1) to simulate pedicle screw pullout after intraoperative external wall perforation and (2) to assess restoration strength with different thread designs in the pedicle screw instrumentation for osteoporotic thoracic vertebrae. METHODS: Twenty fresh-frozen human cadaveric thoracic vertebra bodies were prepared and divided into 4 groups: group 1, 5.5 mm × 45 mm polyaxial single thread pedicle screws (PASTS); group 2, after wall injury 5.5 mm × 45 mm PASTS; group 3, 6.5 mm × 45 mm PASTS after wall injury; and group 4: 6.5 mm × 45 mm polyaxial mixed-threaded screws after wall injury. While group 1 was the control group, groups 2, 3, and 4 were used as study groups after the lateral wall breach. All prepared screw units were placed on a universal pullout measurement testing device. RESULTS: The mean bone mineral density for 20 thoracic vertebrae was 0.57 ± 0.12 g/cm2 (range 0.53-0.6 g/cm2 ). The mean pullout strength was 474.90 Newtons (N) for group 1, 412.85 N for group 2, 475.4 N for group 3, and 630.74N for group 4. The lateral wall breach caused a 14.1 % decrease in average pullout strength compared with the initial screw pullout. Mixed (double)-threaded screws increased pullout strength compared to 6.5 mm screws (P=.036) Conclusion: Using a 1 mm thicker polyaxial pedicle screw or mixed (double)-threaded pedicle screw seems to increase pullout strength; however, this was statistically significant only for group 4. In the thoracic spine, the redirection possibility of the pedicle screw is limited, and augmentation with cement will not be appropriate due to the risk of wall injury-related leakage. Therefore, care should be taken to avoid violating the lateral cortex by using appropriate pedicle entry points and trajectories.