Ce-doped TiO2 supported RuO2 as efficient catalysts for the oxidation of HCl to Cl2.

Reducing the cost of RuO2/TiO2 catalysts is still one of the urgent challenges in catalytic HCl oxidation. In the present work, a Ce-doped TiO2 supported RuO2 catalyst with a low Ru loading was developed, showing a high activity in the catalytic oxidation of HCl to Cl2. The results on some extensive characterizations of both Ce-doped TiO2 carriers and their supported RuO2 catalysts show that the doping of Ce into TiO2 can effectively change the lattice parameters of TiO2 to improve the dispersion of the active RuO2 species on the carrier, which facilitates the production of surface Ru species to expose more active sites for boosting the catalytic performance even under some harsh reaction conditions. This work provides some scientific basis and technical support for chlorine recycling.

Calibrating ITC instruments: Problems with weak base neutralization.

Modern isothermal titration calorimetry instruments give great precision, but for comparable accuracy they require chemical calibration. For the heat factor, one recommended process is HCl into the weak base TRIS. In studying this reaction with a VP-ITC and two Nano-ITCs, we have encountered some problems, most importantly a titrant volume shortfall Δv ≈ 0.3 µL, which we attribute to diffusive loss of HCl in the syringe tip. This interpretation is supported by a mathematical treatment of the diffusion problem. The effect was discovered through a variable-v protocol, which thus should be used to properly allow for it in any reaction that similarly approaches completion. We also find that the effects from carbonate contamination and from OH- from weak base hydrolysis can be more significant that previously thought. To facilitate proper weighting in the least-squares fitting of data, we have estimated data variance functions from replicate data. All three instruments have low-signal precision of σ ≈ 1 µJ; titrant volume uncertainty is a factor of ∼2 larger for the Nano-ITCs than for the VP-ITC. The final heat factors remain uncertain by more than the ∼1 % precision of the instruments and are unduly sensitive to the HCl concentration.

Divergent histopathological and molecular patterns in chemically induced interstitial cystitis/bladder pain syndrome rat models.

Interstitial cystitis/bladder pain syndrome (IC/BPS) is a complex chronic pain disorder with an elusive etiology and nonspecific symptoms. Although numerous animal models with phenotypes similar to human disease have been established, no available regimen can consistently alleviate clinical symptoms. This dilemma led us to question whether current animal models adequately represent IC/BPS. We compared four commonly used IC/BPS rat models to determine their diverse histopathological and molecular patterns. Female rats were given single treatments with hydrochloric acid (HCL), acetic acid (AA), protamine sulfate plus lipopolysaccharide (PS + LPS), or cyclophosphamide (CYP) to induce IC/BPS. Bladder sections were stained for histopathologic evaluation, and mRNA expression profiles were examined using next-generation sequencing and gene set analyses. Mast cell counts were significantly higher in the HCL and AA groups than in the PS + LPS, CYP, and control groups, but only the AA group showed significant collagen accumulation. The models differed substantially in terms of their gene ontology and Kyoto encyclopedia of genes and genomes pathways. Our observations suggest that none of these rat models fully reflects the complexity of IC/BPS. We recommend that future studies apply and compare multiple models simultaneously to fully replicate the complicated features of IC/BPS.

Modelling the colony growth dynamics of Listeria monocytogenes single cells after exposure to peracetic acid and acidic conditions.

Studies of classical microbiology rely on the average behaviour of large cell populations without considering that clonal bacterial populations may bifurcate into phenotypic distinct sub-populations by random switching mechanisms.Listeria monocytogenes exposure to sublethal stresses may induce different physiological states that co-exist (i.e., sublethal injury or dormancy) and present variable resuscitation capacity. Exposures to peracetic acid (PAA; 10-30 ppm; for 3 h), acetic acid and hydrochloric acid (AA and HCl; pH 3.0-2.5; for 5 h) at 20 °C were used to induce different physiological states in L. monocytogenes, Scott A strain. After stress exposure, colony growth of single cells was monitored, on Tryptic Soy Agar supplemented with 0.6 % Yeast Extract, using time-lapse microscopy, at 37 °C. Images were acquired every 5 min and were analyzed using BaSCA framework. Most of the obtained growth curves of the colonies were fitted to the model of Baranyi and Roberts for the estimation of lag time (λ) and maximum specific growth rate (µmax), except the ones obtained after exposure to AA pH 2.7 and 2.5 that were fitted to the Trilinear model. The data of λ and µmax that followed a multivariate normal distribution were used to predict growth variability using Monte Carlo simulations. Outgrowth kinetics after treatment with AA (pH 2.7 and 2.5; for 5 h at 20 °C), PAA (30 ppm; for 3 h at 20 °C) revealed that these stress conditions increase the skewness of the variability distributions to the right, meaning that the variability in lag times increases in favour of longer outgrowth. Exposures to AA pH 2.5 and 30 ppm PAA resulted in two distinct subpopulations per generation with different growth dynamics. This switching mechanism may have evolved as a survival strategy for L. monocytogenes cells, maximizing the chances of survival. Simulation of microbial growth showed that heterogeneity in growth dynamics is increased when cells are recovering from exposure to sublethal stresses (i.e. PAA and acidic conditions) that may induce injury or dormancy.

Induction into viable but non culturable state and outgrowth heterogeneity of Listeria monocytogenes is affected by stress history and type of growth.

Exposure to sublethal stresses related to food-processing may induce a heterogenous mixture of cells that co-exist, comprising healthy, sublethally injured, dormant and dead cells. Heterogeneity in survival capacity and dormancy of single cells may impede the detection of foodborne pathogens. In this study, we exposed Listeria monocytogenes Scott A strain, to peracetic acid (PAA; 20-40 ppm) and to acidic conditions (hydrochloric (HCl) and acetic (AA) acid, adjusted to pH 2.7-3.0, to evaluate the resuscitation capacity and outgrowth kinetics of metabolically active cells in two different media. Injury and the viable-but-non-culturable (VBNC) status of cells were assessed by flow cytometry using CFDA (metabolically active) and PI (dead) staining. Stressed CFDA+PI- cells were sorted on Tryptic Soy (TS) Agar or in TS broth, both supplemented with 0.6 % Yeast Extract (TSAYE or TSBYE), to evaluate culturability. Resuscitation capacity of CFDA+PI-sorted cells (10 events/well) was monitored by visual inspection on TSAYE and by optical density measurement in TSBYE for 5 days. Sorting of L. monocytogenes viable cells (CFDA+PI-) in Ringer's solution on TSAYE and TSBYE showed 100 % recovery in both media (control condition), while the mean lag time in TSBYE was 9.6 h. Treatment with 20 ppm PAA for 90 and 180 min resulted in 74.79 % and 85.82 % of non-culturable cells in TSBYE and increased the average lag time to 41.7 h and 43.8 h, respectively, compared to the control (9.6 h). The longest average lag time (79.5 h) was detected after treatment with 30 ppm PAA for 90 min, while at the same condition sorting of CFDA+PI- cells resulted in 95.05 % and 93.94 % non-culturable cells on TSAYE and TSBYE, respectively. The highest percentage of wells with non-culturable cells (96.17 %) was detected on TSAYE after treatment with 40 ppm PAA for 30 min. Fractions of VBNC cells were detected in TSBYE after treatment with HCl pH 3.0 for 60 and 240 min, and in TSAYE and TSBYE after exposure to AA pH 2.7. Treatment with AA pH 2.7 for 150-300 min increased the range of recorded lag time values compared to 60 min, from 8.6 h up to 13.3 h, as well as the mean lag times in TSBYE. Modelling of the outgrowth kinetics comparing the two types of stress (oxidative vs acid) and the two systems of growth (colonial vs planktonic) revealed that low starting concentrations hindered the detection of viable L. monocytogenes cells, either due to VBNC induction or cell heterogeneity.

Citrullus colocynthis fruit extract as effective eco-friendly corrosion inhibitor in a hydrochloric acid pickling medium for carbon steel by using both experimental and theoretical studies.

The present study focuses on an environmental approach based on the use of an eco-friendly corrosion inhibitor from the Citrullus colocynthis fruit extract for enhancement corrosion resistance of carbon steel (C-S) in acid medium as an alternative to various organic and non-organic chemical inhibitors. The evaluation of the inhibition properties of the fruit methanolic extract of Citrullus colocynthis (CCE) were performed in molar hydrochloric acid (1 M HCl) medium using gravimetric and electrochemical (potentiodynamic polarization and AC impedance) techniques as well as surface analyses. CCE is rich in amino acids, mainly citrulline and ß-(pyrazo-1-yl)-L-analine molecules. Based on the weight loss evaluation, the results demonstrated that this plant extract acts as an effective corrosion inhibitor and a protection level of 93.6% was attained at 500 ppm of CCE after 6 h of metal exposure at 303 K. According to polarization curves, CCE functions as a mixed-type inhibitor. In addition, AC impedance analyses have shown that the incorporation of CCE into the corrosive solution leads to a decrease in load capacity, while improving the charge/discharge function at the interface. This suggests the possibility of the formation of an adsorbed layer on the C-S surface. In addition, scanning electron microscope (SEM) observation, contact angle measurements, and Fourier-transform infrared spectroscopy (FTIR) analyses supported the development of a protective film over CS substrate surface afterwards addition of CCE. Langmuir and/or Temkin isotherms can be used to characterize the adsorption of this organic inhibitor on the C-S surface. X-ray photoelectron spectroscopy (XPS) has revealed that the inhibiting effect of CCE on the corrosion of C-S in 1 M HCl solution is mainly controlled by a chemisorption process and the inhibitive layer is composed of an iron oxide/hydroxide mixture where CCE molecules are incorporated. In order to understand the relationship between the molecular structure and anti-corrosion effectiveness of these inhibitor molecules, quantum chemical studies were carried out using density functional theory (DFT) and molecular dynamics (MD) simulation.

Purification of recombinantly produced somatostatin-28 comparing hydrochloric acid and polyethyleneimine as E. coli extraction aids.

Peptides are used for diagnostics, therapeutics, and as antimicrobial agents. Most peptides are produced by chemical synthesis, but recombinant production has recently become an attractive alternative due to the advantages of high titers, less toxic waste and correct folding of tertiary structure. Somatostatin-28 is a peptide hormone that regulates the endocrine system, cell proliferation and inhibits the release of numerous secondary hormones in human body. It is composed of 28 amino acids and has one disulfide bond, which makes it to an optimal model peptide for a whole downstream purification process. We produced the peptide in the periplasm of E. coli using the CASPON™ technology, an affinity fusion technology system that enables high soluble expression of recombinant proteins and cleaves the fusion tag with a circularly permuted human caspase-2. Furthermore, purification of the products is straight forward using an established platform process. Two different case studies for downstream purification are presented, starting with either hydrochloric acid or polyethyleneimine as an extraction aid. After release of affinity-tagged somatostatin-28 out of E. coli's periplasm, several purification steps were performed, delivering a pure peptide solution after the final polishing step. The process was monitored by reversed-phase high-performance liquid chromatography as well as mass spectrometry to determine the yield and correct disulfide bond formation. Monitoring of impurities like host cell proteins, DNA and endotoxins after each downstream unit confirmed effective removal for both purification pathways.

Deficiency of interleukin-19 exacerbates acute lung injury induced by intratracheal treatment of hydrochloric acid.

Interleukin (IL-19) belongs to the IL-10 family of cytokines and plays diverse roles in inflammation, cell development, viral responses, and lipid metabolism. Acute lung injury (ALI) is a severe respiratory condition associated with various diseases, including severe pneumonia, sepsis, and trauma, lacking established treatments. However, the role of IL-19 in acute inflammation of the lungs is unknown. We reported the impact of IL-19 functional deficiency in mice crossed with an ALI model using HCl. Lungs damages, neutrophil infiltration, and pulmonary edema induced by HCl were significantly worse in IL-19 knockout (KO) mice than in wild-type (WT) mice. mRNA expression levels of C-X-C motif chemokine ligand 1 (CXCL1) and IL-6 in the lungs were significantly higher in IL-19 KO mice than in WT mice. Little apoptosis was detected in lung injury in WT mice, whereas apoptosis was observed in exacerbated area of lung injury in IL-19 KO mice. These results are the first to show that IL-19 is involved in acute inflammation of the lungs, suggesting a novel molecular mechanism in acute respiratory failures. If it can be shown that neutrophils have IL-19 receptors and that IL-19 acts directly on them, it would be a novel drug target.

Efficient acid hydrolysis for compound-specific δ15N analysis of amino acids for determining trophic positions.

Compound-specific isotope analysis of nitrogen in amino acids (CSIA-AA, δ15NAA) has gained increasing popularity for elucidating energy flow within food chains and determining the trophic positions of various organisms. However, there is a lack of research on the impact of hydrolysis conditions, such as HCl concentration and hydrolysis time, on δ15NAA analysis in biota samples. In this study, we investigated two HCl concentrations (6 M and 12 M) and four hydrolysis times (2 h, 6 h, 12 h, and 24 h) for hydrolyzing and derivatizing AAs in reference materials (Tuna) and biological samples of little egret (n = 4), night heron (n = 4), sharpbelly (n = 4) and Algae (n = 1) using the n-pivaloyl-iso-propyl (NPIP) ester approach. A Dowex cation exchange resin was used to purify amino acids before derivatization. We then determined δ15NAA values using gas chromatography-combustion-isotope ratio mass spectrometry (GC-C-IRMS). The results revealed no significant differences (p > 0.05) in δ15NAA values among samples treated with different HCl concentrations or hydrolysis times, particularly for δ15NGlx (range: 21.0-23.5‰) and δ15NPhe (range: 4.3-5.4‰) in Tuna (12 M). Trophic positions (TPs) calculated based on δ15NAA at 2 h (little egret: 2.9 ± 0.1, night heron: 2.8 ± 0.1, sharpbelly: 2.0 ± 0.1 and Algae: 1.3 ± 0.2) were consistent with those at 24 h (3.1 ± 0.1, 2.8 ± 0.1, 2.2 ± 0.1 and 1.1 ± 0.1, respectively), suggesting that a 2-h hydrolysis time and a 6 M HCl concentration are efficient pretreatment conditions for determining δ15NAA and estimating TP. Compared to the currently used hydrolysis conditions (24 h, 6 M), the proposed conditions (2 h, 6 M) accelerated the δ15NAA assay, making it faster, more convenient, and more efficient. Further research is needed to simplify the operational processes and reduce the time costs, enabling more efficient applications of CSIA-AA.

Separation of gold from irradiated actinide material utilizing a 2- thenoyltrifluoroacetone extraction resin.

Post-detonation nuclear forensics capabilities depend on the ability to rapidly isolate radionuclides to improve measurement quality. In this work an extraction chromatography resin was developed utilizing thenoyltrifluoroacetone and 1-octanol supported on Eichrom prefilter resin. The resin was tested in nitric and hydrochloric acid matrices. In nitric acid the resin was able to extract zirconium, while in hydrochloric acid matrices it was possible to extract iron and gallium. In all acid conditions tested, gold was retained but can be eluted from the column with 10 % thiourea.

In-situ biosynthesized plant exudate gums­silver nanocomposites as corrosion inhibitors for mild steel in hydrochloric acid medium.

Natural gums due to availability, multifunctionality, and nontoxicity are multifaceted in application. In corrosion inhibition applications, their performance, in unmodified form is unsatisfactory because of high hydration rate, solubility issues, algal and microbial contamination, as well as thermal instability. This work attempts to enhance the inhibitive performance of Berlinia grandiflora (BEG) and cashew (CEG) exudate gums through various modification approaches. The potential of biogenic BEG and CEG gums-silver (Ag) nanocomposites (NCPs) for corrosion inhibition of mild steel in 1 M HCl is studied. The nanocomposites were characterized using the FTIR, UV-vis, and TEM techniques. The corrosion studies through the gravimetric and electrochemical (PDP, EIS, LPR, and EFM) analyses reveal moderate inhibition performance by the nanocomposites. Furthermore, the PDP results reveal that both inhibitors are mixed-type with maximum corrosion inhibition efficiencies (IEs) of 61.2 % and 54.2 % for BEG-Ag NCP and CEG-Ag NCP, respectively at an optimum concentration of 1.0 %. Modification of these inhibitors with iodide ion (KI) significantly increased the IE values to 90.1 % and 88.5 % for BEG-Ag NCP and CEG-Ag NCP at the same concentration. Surface observation of the uninhibited and inhibited steel samples using SEM/EDAX, 3D Surface profilometer, and AFM affirm that the modified nanocomposites are highly effective.

UV-Vis quantification of the iron content in iteratively steam and HCl purified single-walled carbon nanotubes.

As-produced carbon nanotubes contain impurities which can dominate the properties of the material and are thus undesired. Herein we present a multi-step purification treatment that combines the use of steam and hydrochloric acid in an iterative manner. This allows the reduction of the iron content down to 0.2 wt. % in samples of single-walled carbon nanotubes (SWCNTs). Remarkably, Raman spectroscopy analysis reveals that this purification strategy does not introduce structural defects into the SWCNTs' backbone. To complete the study, we also report on a simplified approach for the quantitative assessment of iron using UV-Vis spectroscopy. The amount of metal in SWCNTs is assessed by dissolving in HCl the residue obtained after the complete combustion of the sample. This leads to the creation of hexaaquairon(III) chloride which allows the determination of the amount of iron, from the catalyst, by UV-Vis spectroscopy. The main advantage of the proposed strategy is that it does not require the use of additional complexing agents.

How to Personalize General Anesthesia-A Prospective Theoretical Approach to Conformational Changes of Halogenated Anesthetics in Fire Smoke Poisoning.

Smoke intoxication is a central event in mass burn incidents, and toxic smoke acts at different levels of the body, blocking breathing and oxygenation. The majority of these patients require early induction of anesthesia to preserve vital functions. We studied the influence of hemoglobin (HMG) and myoglobin (MGB) blockade by hydrochloric acid (HCl) in an interaction model with gaseous anesthetics using molecular docking techniques. In the next part of the study, molecular dynamics (MD) simulations were performed on the top-scoring ligand-receptor complexes to investigate the stability of the ligand-receptor complexes and the interactions between ligands and receptors in more detail. Through docking analysis, we observed that hemoglobin creates more stable complexes with anesthetic gases than myoglobin. Intoxication with gaseous hydrochloric acid produces conformational and binding energy changes of anesthetic gases to the substrate (both the pathway and the binding site), the most significant being recorded in the case of desflurane and sevoflurane, while for halothane and isoflurane, they remain unchanged. According to our theoretical model, the selection of anesthetic agents for patients affected by fire smoke containing hydrochloric acid is critical to ensure optimal anesthetic effects. In this regard, our model suggests that halothane and isoflurane are the most suitable choices for predicting the anesthetic effects in such patients when compared to sevoflurane and desflurane.

Experimental and theoretical insights into Artemisia Stems aqueous extract as a sustainable and eco-friendly corrosion inhibitor for mild steel in 1 M HCl environment.

The present research demonstrates an innovative investigation of environmentally friendly mild steel (M-steel) corrosion inhibition using the artemisia stems aqueous extract (ASAEx) as an inhibitor in hydrochloric acid 1 M. The standard extraction technique of hydrodistillation was used for producing the aqueous solutions of ASAEx. To assess the ratios of the chemical components, phytochemical screening was used to identify the stems of this plant. We used a variety of methods and techniques in our research on corrosion inhibition, including weight loss measures, surface analysis methods like XPS and SEM/EDS, electrochemical testing like PDP and EIS, as well as computational lead compound evaluation. Maximum inhibitory efficacy was achieved with 400 mg/L ASAEx in 1 M HCl at 303 K, i.e. 90%. The PDP investigation verified the mixed-kind inhibitor status of the ASAEx extract. To describe the surface of M-steel, fitting and synthetic data were used to identify a constant phase element (CPE). SEM surface analysis was also used to detect the ASAEx effect on the surface of M-steel. X-ray photoelectron spectroscopy (XPS) analysis shows the presence of trace molecules of ASAEx on M-steel surface characterizing the bands in Maj-ASAEx (major compound of ASAEx). Density functional theory (DFT) and molecular dynamics simulations (MDs) were used in computational chemistry to clarify the adsorption mechanism and inhibitory impact.

The effect of larval exposure to acids and detergents on the life history of the major malaria vector Anopheles arabiensis Patton (Diptera: Culicidae).

BACKGROUND: Anopheles arabiensis, a highly adaptable member of the Anopheles gambiae complex, poses a challenge for control efforts due to its outdoor biting and resting behaviour. Consequently, indoor insecticide-based control methods are ineffective against An. arabiensis. Furthermore, An. arabiensis are adapting to breeding in polluted waters, and may be contributing to residual malaria and malaria in urban areas. There have been some advances in understanding the effect of rural pollutants on Anopheles mosquitoes, but the effect of urban pollutants is poorly understood. Thus, in this study, the effect of acidic pollutants [nitric acid (HNO3) and hydrochloric acid (HCl)] and alkaline pollutants (phosphate-free and phosphate-containing detergent) on two laboratory-reared An. arabiensis strains - an insecticide susceptible strain (SENN) and an insecticide-resistant strain selected from SENN (SENN-DDT) - were determined. RESULTS: The median lethal concentration (LC50) and larval exposure on larval development, adult longevity and insecticide tolerance were evaluated. Nitric acid and phosphate-containing detergent were found to be more toxic than HCl and phosphate-free detergent in terms of LC50 values. Detergent exposure (both phosphate-containing and phosphate-free) increased adult longevity of both strains. Nitric acid reduced larval development time in both SENN and SENN-DDT, whereas HCl reduced larval development time in SENN only. By contrast, both phosphate-containing and phosphate-free detergents increased larval development time of both strains. Furthermore, HNO3 and phosphate-containing detergent increased insecticide tolerance the most. CONCLUSION: The two An. arabiensis strains responded to urban pollutants differently. Thus, this study provides insight into the adaptation of An. arabiensis to acidic and alkaline urban pollutants. © 2024 The Author(s). Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Dispersion of acid without gastric perforation on ingestion of toilet cleaner: a rare autopsy case.

Toilet cleaner containing hydrochloric acid is a common item found in households all over the world. Due to the availability of the substance, it becomes one of the main contributors to corrosive damage to the gastrointestinal system. This study reports a case of a female in her 50s with an alleged history of ingestion of toilet cleaner an empty bottle of which was found together with a suicide note at the incident site. During the autopsy, the forensic expert made an intriguing observation regarding the dispersion of ingested acid to other organs without gastric perforation. Despite the absence of gastric perforation, the corrosive effects of the ingested acid were evident in various organs, including the liver and spleen. This phenomenon suggests a unique mechanism by which the acid is able to disperse and cause damage beyond the stomach, leading to widespread organ involvement. However, through a comprehensive analysis of the detailed history, typical macroscopic autopsy findings, and chemical analysis reports, it is possible to establish that the cause of death is corrosive acid poisoning. In such cases, further investigation is warranted to gain a better understanding of the underlying mechanisms responsible for the dispersion of the acid and its clinical implications. By delving deeper into these aspects, we can enhance our knowledge and contribute to the field of forensic medicine.

The relevant effect of marine salt and epiphytes on Posidonia oceanica waste pyrolysis: Removal of SO2/HCl emissions and promotion of O/HCOOH formation.

Significant quantities of Posidonia oceanica deposit on some beaches and coastlines every year, which generates high costs associated with the disposal of this waste. Pyrolysis may be an adequate way for its valorization. However, it would imply to know how the process takes place and if the removal of its natural detrital inorganic matter (epiphytes, marine salt and sand) is necessary, which are the objectives of this research. Pyrolysis by thermogravimetry-mass spectrometry was carried out on both the washed and unwashed samples. During this waste pyrolysis, the following occurs: (i) the high alkali metal chloride content promotes fragmentation reactions of carbohydrates and O formation, which increases HCOOH intensities at temperatures between 250 and 360 °C; (ii) from 500 °C to 650 °C, Fe2O3 and decomposition of carbonates seem to be involved in reactions that produce O release and steam and CO2 reforming of hydrocarbons and oxygenated organic compounds with H2 generation; (iii) from 650 °C to 750 °C, Fe2O3, high alkali metal content and carbonate decomposition generate char gasification, an increase in O release, SO2 capture and HCOOH formation. In general, the abundance of inorganic matter (chlorides, carbonates, etc.) minimizes the release of various compounds during pyrolysis, including SO2 and HCl, while increasing HCOOH production. Thus, this high content of inorganic matter may represent an advantage for its pyrolysis, producing value-added chemical products with a reduced environmental impact. Therefore, this study may be the starting point for defining the optimal pyrolysis conditions for this waste valorisation.

Fluorine contamination, mobility, and risks in soils at a phosphate-gypsum waste landfill: a new analytical method and comparison with previous methods.

This study used a new X-ray fluorescence (XRF)-based analytical method with better precision and sensitivity to evaluate the fluorine concentrations in soil. It was hypothesized that the XRF method with a pellet-synthesizing procedure may effectively analyze the fluorine concentrations in soil with ease and reliability. The total fluorine concentrations determined using XRF were compared with those determined using three different types of analytical protocols-incineration/distillation, alkaline fusion, and aqua regia extraction procedures. Among the three procedures, the incineration/distillation procedure did not show reliable precision and reproducibility. In contrast, the total fluorine concentrations determined using the XRF analysis were linearly correlated with those determined using the alkaline fusion and aqua regia extraction procedures. Based on the results of the Korean waste leaching procedure and toxicity characteristics leaching procedure, the leachability of fluorine from soil and waste was not directly related to total fluorine concentrations in soil. Risk assessment also revealed that the fluorine-rich soils did not show non-carcinogenic toxic effects, despite exceeding the regulation level (800 mg/kg) in South Korea for total fluorine concentrations in soil. Our results suggest that XRF analysis in combination with the newly developed pretreatment method may be a promising alternative procedure for easily and rapidly determining the total fluorine concentration in soil. However, further efforts are needed to evaluate fluorine leachability and its associated risks in fluorine-contaminated soils.

Zwitterion modified chitosan as a high-performance corrosion inhibitor for mild steel in hydrochloric acid solution.

Herein, a novel chitosan Schiff base (CS-FGA) as a sustainable corrosion inhibitor has been successfully synthesized via a simple amidation reaction by using an imidazolium zwitterion and chitosan (CS). The corrosion inhibition property of CS-FGA for mild steel (MS) in a 1.0 M HCl solution was studied by various electrochemical tests and physical characterization methods. The findings indicate that the maximum inhibition efficiency of CS-FGA as a mixed-type inhibitor for MS in 1.0 M HCl solution with 400 mg L-1 reaches 97.6 %, much much higher than the CS and the recently reported chitosan-based inhibitors. Scanning electron microscopy (SEM), atomic force microscopy (AFM), and water contact angle (WCA) results reveal that the CS-FGA molecules firmly adsorb on the MS surface to form a protective layer. The adsorption of CS-FGA on the MS surface belongs to the Langmuir adsorption isotherm containing both the physisorption and chemisorption. According to the X-ray photoelectron spectroscopy (XPS) and UV-vis spectrum, FeN bonds presented on the MS surface further prove the chemisorption between CS-FGA and Fe to generate the stable protective layer. Additionally, theoretical calculations from quantum chemical calculation (DFT) and molecular simulations (MD) were performed to reveal the inhibition mechanism of CS-FGA.

Comparative study on liquid versus gas phase hydrochloric acid hydrolysis for microcrystalline cellulose isolation from sugarcane bagasse.

Microcrystalline cellulose (MCC) was successfully synthesized from sugarcane bagasse using a rapid, low-temperature hydrochloric acid (HCl) gas treatment. The primary aim was to develop an energy-efficient "green" cellulose extraction process. Response surface methodology optimized the liquid-phase hydrolysis conditions to 3.3 % HCl at 117 °C for 127 min to obtain MCC with 350 degree of polymerization. An alternative gas-phase approach utilizing gaseous HCl diluted in hot 40 °C air was proposed to accelerate MCC production. The cellulose pulp was moistened to 15-18 % moisture content and then exposed to HCl gas, which was absorbed by the moisture in the cellulose fibers to generate a highly concentrated acidic solution that hydrolyzed the cellulose. The cellulose pulp was isolated from depithed bagasse through soda pulping, multistage bleaching and cold alkali purification. Hydrolysis was conducted by saturating the moist cellulose fibers with gaseous HCl mixed with hot air. Extensive analytical characterization using FT-IR, XRD, SEM, TGA, DSC, particle size, and porosity analyses verified comparable physicochemical attributes between MCC samples prepared via liquid and gas phase methods. The gas-produced MCC revealed 85% crystallinity, 71 Å crystallite dimensions, and thermally stable rod-shaped morphology with an average diameter below 200 µm. The similar material properties validate the proposed gas-based technique as an equally effective yet more energy-efficient alternative to conventional aqueous acid hydrolysis for fabricating highly pure MCC powders from lignocellulose. This sustainable approach enables the value-addition of sugarcane bagasse agro-industrial residue into cellulosic nanomaterials for wide-ranging industrial applications. In summary, the key achievements of this work are rapid MCC production under mild temperatures using HCl gas, optimization of liquid phase hydrolysis, successful demonstration of gas phase method, and extensive characterization verifying equivalence between both protocols. The gas methodology offers a greener cellulose extraction process from biomass.