Theoretical calculation on degradation mechanism of novel copolyesters under CALB enzyme.

Poly(butylene succinate-co-furandicarboxylate) (PBSF) and poly(butylene adipate-co-furandicarboxylate) (PBAF) are novel furandicarboxylic acid-based biodegradable copolyesters with great potential to replace fossil-derived terephthalic acid-based copolyesters such as poly(butylene succinate-co-terephthalate) (PBST) and poly(butylene adipate-co-terephthalate) (PBAT). In this study, quantum chemistry techniques after molecular dynamics simulations are employed to investigate the degradation mechanism of PBSF and PBAF catalyzed by Candida antarctica lipase B (CALB). Computational analysis indicates that the catalytic reaction follows a four-step mechanism resembling the ping-pong bibi mechanism, with the initial two steps being acylation reactions and the subsequent two being hydrolysis reactions. Notably, the first step of the hydrolysis is identified as the rate-determining step. Moreover, by introducing single-point mutations to expand the substrate entrance tunnel, the catalytic distance of the first acylation step decreases. Additionally, energy barrier of the rate-determining step is decreased in the PBSF system by site-directed mutations on key residues increasing hydrophobicity of the enzyme's active site. This study unprecedently show the substrate binding pocket and hydrophobicity of the enzyme's active site have the potential to be engineered to enhance the degradation of copolyesters catalyzed by CALB.

Ultrasound-responsive microfibers promoted infected wound healing with neuro-vascularization by segmented sonodynamic therapy and electrical stimulation.

Bacteria-infected wounds pose challenges to healing due to persistent infection and associated damage to nerves and vessels. Although sonodynamic therapy can help kill bacteria, it is limited by the residual oxidative stress, resulting in prolonged inflammation. To tackle these barriers, novel 4 octyl itaconate-coated Li-doped ZnO/PLLA piezoelectric composite microfibers are developed, offering a whole-course "targeted" treatment under ultrasound therapy. The inclusion of Li atoms causes the ZnO lattice distortion and increases the band gap, enhancing the piezoelectric and sonocatalytic properties of the composite microfibers, collaborated by an aligned PLLA conformation design. During the infection and inflammation stages, the piezoelectric microfibers exhibit spatiotemporal-dependent therapeutic effects, swiftly eliminating over 94.2 % of S. aureus within 15 min under sonodynamic therapy. Following this phase, the microfibers capture reactive oxygen species and aid macrophage reprogramming, restoring mitochondrial function, achieving homeostasis, and shortening inflammation cycles. As the wound progresses through the healing stages, bioactive Zn2+ and Li + ions are continuously released, improving cell recruitment, and the piezoelectrical stimulation enhances wound recovery with neuro-vascularization. Compared to commercially available dressings, our microfibers accelerate the closure of rat wounds (Φ = 15 mm) without scarring in 12 days. Overall, this "one stone, four birds" wound management strategy presents a promising avenue for infected wound therapy.

Examination of primary aromatic amines content in polylactic acid straws and migration into food simulants using SERS with LC-MS.

Polylactic acid (PLA) straws hold eco-friendly potential; however, residual diisocyanates used to enhance the mechanical strength can generate carcinogenic primary aromatic amines (PAAs), posing health risks. Herein, we present a rapid, comprehensive strategy to detecting PAAs in 18 brands of food-grade PLA straws and assessing their migration into diverse food simulants. Surface-enhanced Raman spectroscopy was conducted to rapidly screen straws for PAAs. Subsequently, qualitative determination of migrating PAAs into various food simulants (4 % acetic acid, 10 % ethanol, 50 % ethanol) occurred at 70 °C for 2 h using liquid chromatography-mass spectrometry. Three PAAs including 4,4'-methylenedianiline, 2,4'-methylenedianiline, and 2,4-diaminotoluene were detected in all straws. Specifically, 2,4-diaminotoluene in 50 % ethanol exceeded specific migration limit of 2 µg/kg, raising safety concerns. Notably, PAAs migration to 10 % and 50 % ethanol surpassed that to 4 % acetic acid within a short 2-hour period. Moreover, PLA straws underwent varying degrees of shape changes before and after migration. Straws with poly(butylene succinate) resisted deformation compared to those without, indicating enhanced heat resistance, while poly(butyleneadipate-co-terephthalate) improved hydrolysis resistance. Importantly, swelling study unveiled swelling effect wasn't the primary factor contributing to the increased PAAs migration in ethanol food simulant, as there was no significant disparity in swelling degrees across different food simulants. FT-IR and DSC analysis revealed higher PAAs content in 50 % ethanol were due to highly concentrated polar ethanol disrupting hydrogen bonds and van der Waal forces holding PLA molecules together. Overall, minimizing contact between PLA straws and alcoholic foods is crucial to avoid potential safety risks posed by PAAs.

Concomitant Delivery of Pirarubicin and Salinomycin Synergistically Enhanced the Efficacy of Cancer Therapy and Reduced the Risk of Cancer Relapse.

Pirarubicin attracted considerable attention in clinical studies because of its high therapeutic efficacy and reduced toxicity in comparison with other anthracyclines. Nevertheless, ~ 30% patients undergoing PIRA treatment still experience relapse and metastasis. Clinical advancements unveiled that cancer stem cells (CSCs) residing in the tumor constitutes a major factor for such limitations and subsequently are the reason for treatment failure. Consequently, eradicating CSCs alongside bulk tumor is a crucial undertaking to attain utmost therapeutic efficacy of the treatment. Nevertheless, majority of the CSCs inhibitors currently under examination lack specificity, show unsynchronized bioavailability with other primary treatments and exhibit notable toxicity in their therapeutic applications, which is primarily attributable to their inadequate tumor-targeting capabilities. Therefore, we have developed a biodegradable polylactic acid based blend block copolymeric NPs for concomitant delivery of CSCs inhibitor Salinomycin (SAL) & chemotherapeutic drug Pirarubicin (PIRA) with an aim to improve the efficacy of treatment and prevent cancer relapse. Prepared NPs showed < 100 nm size and excellent loading with sustained release for both the drugs. Also, PIRA:SAL co-loaded NPs exhibits synergistically enhanced cytotoxicity against cancer cell as well as CSCs. Most importantly, NPs mediated co-delivery of the drugs showed complete tumor eradication, without any reoccurrence throughout the surveillance period. Additionally, NPs treatment didn't show any histopathological alteration in vital organs confirming their non-toxic nature. Altogether, present study concludes that the developed PIRA:SAL NPs have excellent efficacy for tumor regression as well as prevention of cancer relapse, hence can be used as a potential combination therapy for cancer treatment.

Preparation and properties of PCL coaxial electrospinning films with shell loaded with CEO and core coated LEO nanoemulsions.

During storage and transportation, the reduction of microbial contamination and management of the exudation of fluids from the fish can effectively mitigate spoilage and degradation of fish fillets. In this work, the coaxial electrospinning films loaded with natural plant preservatives, namely laurel essential oil (LEO) and clove essential oil (CEO), were prepared by the coaxial electrospinning method synergistic with nanoemulsion techniques, and the hydrophilic preservation pads were prepared. The morphology of the film fiber is clear, without beads or damage, with fiber diameters falling within the 230-260 nm range. It has a distinct core-shell structure, exceptional thermal stability, and strong antibacterial and antioxidant properties. The core-shell structure of the fiber subtly regulates the release of preservatives and significantly improves the utilization efficiency. At the same time, the synergistic use of two essential oils can reduce the amount while amplifying their effectiveness. The pads significantly slowed down the increase of key indicators of spoilage, such as total viable count (TVC), pH, thiobarbituric acid reactive substances (TBA), and total volatile base nitrogen (TVB-N), during the storage of the fish fillets. Furthermore, the pads effectively slowed down the decline in water-holding capacity, the deterioration of textural qualities, and the negative changes in the microstructure of the fish muscle. Ultimately, the pads notably delayed the spoilage of fish fillets, extending their shelf life from 5 d to 9 d. The efficient utilization of biological preservatives in this film can provide technical support for the development of food preservation materials.

Diesters of monoimide of perylene-3,4,9,10-tetracarboxylic acid - Synthesis, characterization, and application for dyeing polyester fibre, polystyrene, and poly (methyl methacrylate) films.

Three dyes-diesters of monoimides of perylene-3,4,9,10-tetracarboxylic acid were synthesized in three-stage process: esterification, hydrolysis, and monoimidation as potential fluorescent light-stable colorants for high visibility safety wear. The structure of these compounds was confirmed by 1H nuclear magnetic resonance spectroscopy and mass spectrometry, and their spectroscopic and physicochemical properties were determined. Colorants were applied to dyeing polyester fibre and polystyrene and poly (methyl methacrylate) films. The light, wash, and rubbing fastness of the dyeings were determined, and chromaticity coordinates were measured and discussed.

Synergistic nanocoating with layer-by-layer functionalized PCL membranes enhanced by manuka honey and essential oils for advanced wound healing.

Chronic wounds represent a significant global health concern, statistically impacting 1-2% of the population in developed countries throughout their lifetimes. These wounds cause considerable discomfort for patients and necessitate substantial expenditures of time and resources for treatment. Among the emerging therapeutic approaches, medicated dressings incorporating bioactive molecules, including natural compounds, are particularly promising. Hence, the objective of this study was to develop novel antimicrobial dressings for wound treatment. Specifically, polycaprolactone membranes were manufactured using the electrospinning technique and subsequently coated with natural polyelectrolytes (chitosan as a polycation and a mixture of manuka honey with essential oils nanoemulsions as a polyanion) employing the Layer-by-Layer assembly technique. Physico-chemical and morphological characterization was conducted through QCM-D, FTIR-ATR, XPS, and SEM analyses. The results from SEM and QCM-D demonstrated successful layer deposition and coating formation. Furthermore, FTIR-ATR and XPS analyses distinguished among different coating compositions. The coated membranes were tested in the presence of fibroblast cells, demonstrating biocompatibility and expression of genes coding for VEGF, COL1, and TGF-ß1, which are associated with the healing process (assessed through RT-qPCR analysis). Finally, the membranes exhibited excellent antibacterial activity against both Staphylococcus aureus and Pseudomonas aeruginosa, with higher bacterial strain inhibition observed when cinnamon essential oil nanoemulsion was incorporated. Taken together, these results demonstrate the potential application of nanocoated membranes for biomedical applications, such as wound healing.

Poly(ε-Caprolactone)-Based Composites Modified With Polymer-Grafted Magnetic Nanoparticles and L-Ascorbic Acid for Bone Tissue Engineering.

The aim of this study was to develop multifunctional magnetic poly(ε-caprolactone) (PCL) mats with antibacterial properties for bone tissue engineering and osteosarcoma prevention. To provide good dispersion of magnetic iron oxide nanoparticles (IONs), they were first grafted with PCL using a novel three-step approach. Then, a series of PCL-based mats containing a fixed amount of ION@PCL particles and an increasing content of ascorbic acid (AA) was prepared by electrospinning. AA is known for increasing osteoblast activity and suppressing osteosarcoma cells. Composites were characterized in terms of morphology, mechanical properties, hydrolytic stability, antibacterial performance, and biocompatibility. AA affected both the fiber diameter and the mechanical properties of the nanocomposites. All produced mats were nontoxic to rat bone marrow-derived mesenchymal cells; however, a composite with 5 wt.% of AA suppressed the initial proliferation of SAOS-2 osteoblast-like cells. Moreover, AA improved antibacterial properties against Staphylococcus aureus and Escherichia coli compared to PCL. Overall, these magnetic composites, reported for the very first time, can be used as scaffolds for both tissue regeneration and osteosarcoma prevention.

Composite suture material based on polylactide accelerates the healing of surgical wounds in in vivo experiment.

In laboratory conditions, composite sutures based on polylactide (PLA) containing chitin nanofibrils modified with polyethylene glycol (CN-PEG) and poviargol (silver nanoparticles stabilized with poly(N-vinylpyrrolidone)) were obtained, studied, and used as a prototype. Surgical sutures threads with the addition of CN-PEG have stable mechanical properties both in air and in a buffer simulating the environment of a living organism. The yield strength of oriented threads decreased by an average of 15%, whereas for non-oriented threads the decrease was 3-4 times. The strength values in simple units of unfilled PLA, PLA containing 5 wt % CN-PEG, and PLA with 1 wt % Poviargol were on average 50% higher than the national standard 31620-2012. The results of in vivo experiments on albino rats (cross-linking skin and muscle tissue in the linea alba area) showed that composite sutures are best for suturing muscle tissue, whereas unfilled PLA sutures are more suitable for suturing skin. When suturing muscle tissue, suturing with composite sutures increased the number of collagen fibers of different diameters.

Characterization of Bacillus pacificus KUMBNGBT-39-Derived Polyhydroxybutyrate and Impact of Physicochemical Factors on its Production.

The extensive use of various chemicals in synthetic plastics is toxic and threatens the biosphere. To address this, the study aimed to isolate, screen, characterize, optimize, and quantify polyhydroxybutyrate (PHB)-producing bacteria using cost-effective residues. Isolated from a landfill site, the Gram-positive, rod-shaped, spore-forming, motile bacterium with intracellular PHB granules was identified as Bacillus pacificus based on phenotypic and genotypic characteristics. Optimal PHB production parameters included a nutrient broth medium, 72 h of incubation, a temperature of 37° C, a pH of 7.0, glucose as the carbon source, ammonium chloride as the nitrogen source, and a carbon-to-nitrogen ratio of 4:1, resulting in a 1.42-fold PHB production increase. B. pacificus was also cultured on various low-cost substrates. Among the oil wastes, feedstock showed the highest PHB production (1.983 ± 0.005 g/L) and among agricultural residues, the maximum PHB was obtained from rice bran (1.626 ± 0.01 g/L). UV-visible spectrophotometric, FT-IR, and HR-LCMS analysis of extracted PHB confirmed characteristics of PHB molecules (ʎ-max at 210 nm, functional groups between 1152 and 2925 cm-1). The 1H NMR analysis revealed distinct signals for protons resonating at aliphatic CH3 proton groups, bridged CH protons, and shielding CH2 proton regions that matched PHBs. Thermal gravimetric analysis (TGA) and direct scanning colorimetric (DSC) analysis revealed 89.4% degradation and melting temperature at 124.1 °C for the extracted PHB compound.

Price prediction of polyester yarn based on multiple linear regression model.

China's polyester textile industry is one of the notable contributors to national economy. This paper takes polyester yarn, core raw material in polyester textile industry chain, as research object, and deeply explores its price indicators and risk hedging mechanisms through multiple linear regression models and Holt-Winters approaches. It is worth mentioning that with continuous development of digital technology, digital transformation of production lines and warehouses has become an important development feature in various industries. This study also actively complies with this trend, and innovatively incorporates the upstream and downstream production line start-up rates into price prediction model. Through this initiative, we can more comprehensively consider the impact of supply and demand changes on price of polyester yarn, thus making prediction results more closely reflect the actual market situation. This quantitative analysis method undoubtedly provides new ideas for enterprises to better grasp market dynamics in digital era.

Preparation of transferrin-targeted temozolomide nano-micelles and their anti-glioma effect.

Objectives: This study aims to develop brain-targeted temozolomide (TMZ) nanograins using the biodegradable polymer material PEG-PLA as a carrier. The model drug TMZ was encapsulated within the polymer using targeted nanotechnology. Key characteristics such as appearance, particle size, size distribution, drug loading capacity, in vitro release rate, stability, and anti-tumor effects were systematically evaluated through in vitro experiments. Methods: Transmission electron microscopy (TEM) and Malvern size analyzer were employed to observe the morphological and particle size features of the TMZ nanospheres at various time points to assess stability. The effects of TMZ nanograins on glioma cell viability and apoptosis were evaluated using MTT assays and flow cytometry. Results: The targeted TMZ nano-micelles were successfully synthesized. After loading and targeted modifications, the particle size increased from 50.7 to 190 nm, indicating successful encapsulation of TMZ. The average particle size of the nano-micelles remained stable around 145 ± 10 nm at 1 day, 15 days, and 30 days post-preparation. The release rate of the nano-micelles was monitored at 2 h, 12 h, 24 h, and 48 h post-dialysis, ultimately reaching 95.8%. Compared to TMZ alone, the TMZ-loaded PEG-PLA nano-micelles exhibited enhanced cytotoxicity and apoptosis in glioma cells. This was accompanied by increased mitochondrial membrane potential and reactive oxygen species (ROS) levels following treatment with the TMZ nano-micelles. Conclusions: TMZ-loaded nano-micelles demonstrated a gradual release profile and significantly enhanced inhibitory effects on human glioma U251 cells compared to TMZ alone. The findings suggest that TMZ-loaded PEG-PLA nano-micelles may offer a more effective therapeutic approach for glioma treatment.

A Clinical Histology Study Evaluating the Biostimulatory Activity Longevity of Injectable Poly-L-Lactic Acid for Facial Rejuvenation.

BACKGROUND: Poly-L-lactic acid (PLLA) is an injectable filler used for restoring facial fat volume loss that improves skin quality. OBJECTIVE: To evaluate the histological changes underlying the observed improvement in skin quality after repeated PLLA injections. METHODS: Ten healthy women were enrolled in this randomized, placebo-controlled, single-center study. Eligible subjects received 3 treatments every 4 weeks with either PLLA (treatment group) or saline (control group) injections, into both sides of the face. Follow-up visits were at week 18 after the last treatment. Assessments included live ratings, patient questionnaires, three-dimensional microtopography imaging analysis, and histological analysis from biopsies taken before and after PLLA treatment. RESULTS: At the 18-week follow-up, there was a significant improvement in investigator- and subject-rated global aesthetic improvement (GAIS) scores, as well as a decrease in wrinkle severity in PLLA-treated but not placebo-treated patients. Skin quality parameters of erythema, pore size, and roughness were significantly improved from baseline and compared with placebo at the 18-week follow-up as assessed by microtopographic analysis and investigator ratings. Histologic analysis revealed increased tissue remodeling and angiogenesis in PLLA-treated tissues at the 18-week follow-up and decreased elastin fragmentation compared with baseline. No treatment-related adverse events occurred. CONCLUSION: Repeated PLLA treatments may improve skin quality through tissue remodeling and neovascularization. J Drugs Dermatol. 2024;23(9):729-734. doi:10.36849/JDD.8057.

Timeframe of aerobic biodegradation of bioplastics differs under standard conditions and conditions simulating technological composting with biowaste.

To determine the actual timeframe of biodegradation, bioplastics (BPs) (based on polylactic acid (PLA), starch (FS), polybutylene succinate (PBS), cellulose (Cel)) were degraded with biowaste (B), which simulates real substrate technological conditions during composting. For comparison, standard conditions (with mature compost (C)) were also applied. The 90-day aerobic tests, both with C or B, were carried out at 58 ± 2 °C. This comparison enables understanding of how BPs behave in real substrate conditions and how C and B affect the time or completeness of degradation based on oxygen consumption (OC) for BPs, the ratio of OC to theoretical oxygen consumption (OC/Th-O2), and the decrease in volatile solids (VS). Additionally, for deeper insight into the biodegradation process, microscopic, microbial (based on 16S rDNA), FTIR, and mechanical (tensile strength, elongation at break) analyses were performed. There was no association between the initial mechanical properties of BPs and the time necessary for their biodegradation. BPs lost their mechanical properties and remained visible for a shorter time when degraded with C than with B. OC for Cel, FS, PLA, and PBS biodegradation was 1143, 1654, 1748, and 1211g O2/kg, respectively, which amounted to 83, 70, 69, and 60% of the theoretical OC (Th-O2), respectively. Intensive OC took place at the same time as an intensive decrease in VS content. With C, Cel was most susceptible to biodegradation (completely biodegrading within 11 days), and PLA was least susceptible (requiring 70 days for complete biodegradation). With B, however, the time required for biodegradation was generally longer, and the differences in the time needed for complete biodegradation were smaller, ranging from 45 d (FS) to 75 d (PLA). The use of C or B had the greatest effect on Cel biodegradation (10 d vs 62 d, respectively), and the least effect on PLA (70 d vs 75 d). Specific bacterial and fungal community structures were identified as potential BP biodegraders; the communities depended on the type of BPs and the substrate conditions. In conclusion, the time needed for biodegradation of these BPs varied widely depending on the specific bioplastic and the substrate conditions; the biodegradability decreased in the following order: Cel â‰« FS â‰« PBS â‰« PLA with C and FS â‰« Cel = PBS â‰« PLA with B. The biodegradability ranking of BPs with B was assumed to be ultimate as it simulates the real substrate conditions during composting. However, all of the BPs completely biodegraded in less than 90 days.

A Spironolactone-Based Prototype of an Innovative Biomedical Patch for Wound Dressing Applications.

The electrospinning process is an effective technique for creating micro- and nanofibers from synthetic and natural polymers, with significant potential for biomedical applications and drug delivery systems due to their high drug-loading capacity, large surface area, and tunable release times. Poly(L-lactic acid) (PLLA) stands out for its excellent thermo-mechanical properties, biodegradability, and bioabsorbability. Electrospun PLLA nanofibrous structures have been extensively investigated as wound dressings, sutures, drug delivery carriers, and tissue engineering scaffolds. This study aims to create and characterize electrospun PLLA membranes loaded with spironolactone (SP), mimicking active compounds of Ganoderma lucidum (GL), to develop a biodegradable patch for topical wound-healing applications. GL, a medicinal mushroom, enhances dermal wound healing with its bioactive compounds, such as polysaccharides and ganoderic acids. Focusing on GL extracts-obtained through green extraction methods-and innovative drug delivery, we created new fibers for wound-healing potential applications. To integrate complex mixtures of bioactive compounds into the fibers, we developed a prototype using a single pure substance representing the extract mixture. This painstaking work presents the results of the fabricating, wetting, moisture properties, material resilience, and full characterization of the product, providing a robust rationale for the fabrication of fibers imbued with more complex extracts.

Exploiting the Applicability of Polytetrahydrofuran-Modified Polyester for the Fabric Phase Sorptive Extraction of Doxycycline from Human Urine.

In this report, a polytetrahydrofuran-coated polyester fabric phase sorptive extraction (FPSE) for the determination of doxycycline in human urine was described. The sol-gel polytetrahydrofuran sorbent proved to be superior against other sol-gel coated cellulose and polyester membranes tested. The effect of the extraction parameters including membrane surface area, sample pH and volume, salt concentration, extraction time, stirring rate, etc., on the extraction efficiency of the analyte was studied using the "one-factor-at-a-time" (OFAT) and Box-Behnken design approaches. The analytical method proposed was validated in compliance with FDA guidelines for bioanalytical procedures. The method was linear in the determination range of 100-5000 ng/mL with the determination coefficient of 0.9953. The limit of detection (LOD) and the lower limit of quantification for doxycycline was 17 and 100 ng/mL, respectively. The relative recoveries for intra-day and inter-day studies ranged from 98.5-112.2% and 89.6-96.8%, respectively. The relative standard deviation was lower than 14.7% in all cases, exhibiting good precision. The sol-gel polytetrahydrofuran-modified FPSE membranes were reusable for at least 30 times. The greenness of the developed method was evaluated using Sample Preparation Metric of Sustainability (SPMS) and Blue Applicability Grade Index (BAGI) metric tools. Finally, the analytical scheme was successfully employed for the quantitation of urinary doxycycline collected at various time points following the administration of doxycycline-containing tablets.

Application of PLGA-PEG-PLGA Nanoparticles to Percutaneous Immunotherapy for Food Allergy.

Compared with oral or injection administration, percutaneous immunotherapy presents a promising treatment modality for food allergies, providing low invasiveness and safety. This study investigated the efficacy of percutaneous immunotherapy using hen egg lysozyme (HEL)-loaded PLGA-PEG-PLGA nanoparticles (NPs), as an antigen model protein derived from egg white, compared with that of HEL-loaded chitosan hydroxypropyltrimonium chloride (CS)-modified PLGA NPs used in previous research. The intradermal retention of HEL in excised mouse skin was measured using Franz cells, which revealed a 2.1-fold higher retention with PLGA-PEG-PLGA NPs than that with CS-modified PLGA NPs. Observation of skin penetration pathways using fluorescein-4-isothiocyanate (FITC)-labeled HEL demonstrated successful delivery of HEL deep into the hair follicles with PLGA-PEG-PLGA NPs. These findings suggest that after NPs delivery into the skin, PEG prevents protein adhesion and NPs aggregation, facilitating stable delivery deep into the skin. Subsequently, in vivo percutaneous administration experiments in mice, with concurrent iontophoresis, demonstrated a significant increase in serum IgG1 antibody production with PLGA-PEG-PLGA NPs compared with that with CS-PLGA NPs after eight weeks of administration. Furthermore, serum IgE production in each NP administration group significantly decreased compared with that by subcutaneous administration of HEL solution. These results suggest that the combination of PLGA-PEG-PLGA NPs and iontophoresis is an effective percutaneous immunotherapy for food allergies.

Fabrication of small-diameter in situ tissue engineered vascular grafts with core/shell fibrous structure and a one-year evaluation via rat abdominal vessel replacement model.

A high vascular patency was realized in the bulk or surface heparinized small-diameter in situ tissue-engineered vascular grafts (TEVGs) via a rabbit carotid artery replacement model in our previous studies. Those surface heparinized TEVGs could reduce the occurrence of aneurysms, but with a low level of the remodeled elastin, whereas those bulk heparinized TEVGs displayed a faster degradation and an increasing occurrence of aneurysms, but with a high level of the regenerated elastin. To combine the advantages of the bulk and surface graft heparinization to boost the remodeling of elastin and defer the occurrence of aneurysms, a coaxial electro-spinning technique was used to fabricate a kind of small-diameter core/shell fibrous structural in situ TEVGs with a faster degradable poly(lactic-co-glycolic acid) (PLGA) as a core layer and a relatively lower degradable poly(ε-caprolactone) (PCL) as a shell layer followed by the surface heparinization. The in vitro mechanical performance and enzymatic degradation tests revealed the resulting PLGA@PCL-Hep in situ TEVGs possessing not only a faster degradation rate, but also the mechanical properties comparable to those of human saphenous veins. After implanted in the rat abdominal aorta for 12 months, the good endothelialization, low inflammation, and no calcification were evidenced. Furthermore, the neointima layer of regenerated new blood vessels was basically constructed with a well-organized arrangement of elastin and collagen proteins. The results showed the great potential of these in situ TEVGs to be used as a novel type of long-term small-diameter vascular grafts.

Lactobacillus casei displaying MCP2α and FlaC delivered by PLA microspheres effectively enhances the immune protection of largemouth bass (Micropterus salmoides) against LMBV infection.

Largemouth bass ranavirus (LMBV) seriously affects the development of largemouth bass (Micropterus salmoides) industry and causes huge economic losses. Oral vaccine can be a promising method for viral disease precaution. In this study, MCP2α was identified as a valuable epitope region superior to MCP and MCP2 of LMBV by neutralizing antibody experiments. Then, recombinant Lactobacillus casei expressing the fusion protein MCP2αC (MCP2α as antigen, C represents flagellin C from Aeromonas hydrophila as adjuvant) on surface was constructed and verified. Further, PLA microsphere vaccine loading recombinant MCP2αC L. casei was prepared. The PLA microspheres vaccine were observed by scanning electron microscopy and showed a smooth, regular spherical surface with a particle size distribution between 100 and 200 µm. Furthermore, we evaluated the tolerance of PLA-MCP2αC vaccine in simulated gastric fluid and simulated intestinal fluid, and the results showed that PLA-MCP2αC can effectively resist the gastrointestinal environment. Moreover, the protective effect of PLA-MCP2αC against LMBV was evaluated after oral immunization and LMBV challenge. The results showed that PLA-MCP2αC effectively up-regulated the activity of serum biochemical enzymes (T-SOD, T-AOC, LZM, complement C3) and induced the mRNA expression of representative immune genes (IL-1ß, TNF-α, IFN-γ, MHC-IIα, Mx, IgM) in spleen and head kidney tissues. The survival rate of largemouth bass vaccinated with PLA-MCP2αC increased from 24 % to 68 %. Meanwhile, PLA-MCP2αC inhibited the LMBV burden in spleen, head kidney and liver tissues and attenuated tissue damage in spleen. These results suggested that PLA-MCP2αC can be used as a candidate oral vaccine against LMBV infection in aquaculture.

Nanomechanical mapping of PLA hydroxyapatite composite scaffolds links surface homogeneity to stem cell differentiation.

Polymer composite scaffolds hold promise in bone tissue engineering due to their biocompatibility, mechanical properties, and reproducibility. Among these materials, polylactic acid (PLA), a biodegradable plastics has gained attention for its processability characteristics. However, a deeper understanding of how PLA scaffold surface properties influence cell behavior is enssential for advancing its applications. In this study, 3D-printed PLA scaffolds containing hydroxyapatite (HA) were analyzed using atomic force microscopy and nanomechanical mapping. The addition of HA significantly increased key surface properties compared to unmodified PLA scaffols. Notably, the HA-modified scaffold demonstrated Gaussian distribution of stiffness and adhesive forces, in contrast to the bimodal properties observed in the unmodified PLA scaffolds. Human adipose-derived mesenchymal stem cell (hADMSC) seeded on the 3D-printed PLA scaffolds blended with 10% HA (P10) exhibited strong attachment. After four weeks, osteogenic differentiation of hADMSCs was detected, with calcium deposition reaching 6.76% ± 0.12. These results suggest that specific ranges of stiffness and adhesive forces of the composite scaffold can support cell attachement, and mineralization. The study highlights that tailoring suface properties of composite scaffolds is crucial for modulating cellular interactions, thus advancing the development of effective bone replacement materials.