Use of Magnetic Resonance Imaging for Visualization of Oral Dosage Forms in the Human Stomach: A Scoping Review.

Oral dosage forms are the most widely and frequently used formulations to deliver active pharmaceutical ingredients (APIs), due to their ease of administration and noninvasiveness. Knowledge of intragastric release rates and gastric mixing is crucial for predicting the API release profile, especially for immediate release formulations. However, knowledge of the intragastric fate of oral dosage forms in vivo to date is limited, particularly for dosage forms administered when the stomach is in the fed state. An improved understanding of gastric food processing, dosage form location, disintegration times, and food effects is essential for greater understanding for effective API formulation design. In vitro standard and controlled modeling has played a significant role in predicting the behavior of dosage forms in vivo. However, discrepancies are reported between in vitro and in vivo disintegration times, with these discrepancies being greatest in the fed state. Studying the fate of a dosage form in vivo is a challenging process, usually requiring the use of invasive methods, such as intubation. Noninvasive, whole body imaging techniques can however provide unique insights into this process. A scoping review was performed systematically to identify and critically appraise published studies using MRI to visualize oral solid dosage forms in vivo in healthy human subjects. The review identifies that so far, an all-purpose robust contrast agent or dosage form type has not been established for dosage form visualization and disintegration studies in the gastrointestinal system. Opportunities have been identified for future studies, with particular focus on characterizing dosage form disintegration for development after the consumption food, as exemplified by the standard Food and Drug Administration (FDA) high fat meal.

In-lab synthesized turn-off fluorescence sensor for estimation of Gemigliptin and Rosuvastatin polypill appraised by Spider diagram, AGREE and whiteness metrics.

Gemigliptin-Rosuvastatin single-pill combination is a promising therapeutic tool in the effective control of hyperglycemia and hypercholesterolemia. Organic sensors with high quantum yields have profoundly significant applications in the pharmaceutical industry, such as routine quality control of marketed formulations. Herein, the fluorescence sensor, 2-Morpholino-4,6-dimethyl nicotinonitrile 3, (λex; 226 nm, λem; 406 nm), was synthesized with a fluorescence quantum yield of 56.86% and fully characterized in our laboratory. This sensor showed high efficiency for the determination of Gemigliptin (GEM) and Rosuvastatin (RSV) traces through their stoichiometric interactions and simultaneously fractionated by selective solvation. The interaction between the stated analytes and sensor 3 was a quenching effect. Various experimental parameters and the turn-off mechanism were addressed. The adopted approach fulfilled the ICH validation criteria and showed linear satisfactory ranges, 0.2-2 and 0.1-1 µg/mL for GEM and RSV, respectively with nano-limits of detection less than 30 ng/mL for both analytes. The synthesized sensor has been successfully applied for GEM and RSV co-assessment in their synthetic polypill with excellent % recoveries of 98.83 ± 0.86 and 100.19 ± 0.64, respectively. No statistically significant difference between the results of the proposed and reported spectrophotometric methods in terms of the F- and t-tests. Ecological and whiteness appraisals of the proposed study were conducted via three novel approaches: the Greenness Index via Spider Diagram, the Analytical Greenness Metric, and the Red-Green-Blue 12 model. The aforementioned metrics proved the superiority of the adopted approach over the previously published one regarding eco-friendliness and sustainability. Our devised fluorimetric turn-off sensing method showed high sensitivity, selectivity, feasibility, and rapidity with minimal cost and environmental burden over other sophisticated techniques, making it reliable in quality control labs.

Charge transfer complex-based spectrophotometric analysis of famotidine in pure and pharmaceutical dosage forms.

A straightforward and efficient spectrum technique was created using Ortho-chloranil as the electron acceptor (-acceptor) in a charge transfer (CT) complex formation reaction to determine the concentration of famotidine (FMD) in solutions. Compared to the double-distilled blank solution, the reaction result detected a definite violet colour at a maximum absorption wavelength of 546 nm, For concentrations range 2-28 µg/ml, the technique demonstrated excellent compliance with Beer-Law and Lambert's, as evidenced by its molar absorptivity of 2159.648 L mol-1 cm-1. Lower detection limits of 0.3024 µg/ml and 1.471 µg/ml, respectively, were discovered. The complexes of famotidine and Ortho-chloranil were found to have a 2:1 stoichiometry. Additionally, the suggested approach effectively estimated famotidine concentrations in pharmaceutical formulations, particularly in tablet form.

Application of 3D printing in early phase development of pharmaceutical solid dosage forms.

Three-dimensional printing (3DP) is an emerging technology, offering the possibility for the development of dose-customized, effective, and safe solid oral dosage forms (SODFs). Although 3DP has great potential, it does come with certain limitations, and the traditional drug manufacturing platforms remain the industry standard. The consensus appears to be that 3DP technology is expected to benefit personalized medicine the most, but that it is unlikely to replace conventional manufacturing for mass production. The 3DP method, on the other hand, could prove well-suited for producing small batches as an adaptive manufacturing technique for enabling adaptive clinical trial design for early clinical studies. The purpose of this review is to discuss recent advancements in 3DP technologies for SODFs and to focus on the applications for SODFs in the early clinical development stages, including a discussion of current regulatory challenges and quality controls.

Systematic screening of photopolymer resins for stereolithography (SLA) 3D printing of solid oral dosage forms: Investigation of formulation factors on printability outcomes.

Pharmaceutical three-dimensional printing (3DP) is now in its golden age. Recent years have seen a dramatic increase in the research in 3D printed pharmaceuticals due to their potential to deliver highly personalised medicines, thus revolutionising the way medicines are designed, manufactured, and dispensed. A particularly attractive 3DP technology used to manufacture medicines is stereolithography (SLA), which features key advantages in terms of printing resolution and compatibility with thermolabile drugs. Nevertheless, the enthusiasm for pharmaceutical SLA has not been followed by the introduction of novel excipients specifically designed for the fabrication of medicines; hence, the choice of biocompatible polymers and photoinitiators available is limited. This work provides an insight on how to maximise the usefulness of the limited materials available by evaluating how different formulation factors affect printability outcomes of SLA 3D printed medicines. 156 photopolymer formulations were systematically screened to evaluate the influence of factors including photoinitiator amount, photopolymer molecular size, and type and amount of liquid filler on the printability outcomes. Collectively, these factors were found highly influential in modulating the print quality of the final dosage forms. Findings provide enhanced understanding of formulation parameters informing the future of SLA 3D printed medicines and the personalised medicines revolution.

Microfluidic nanoparticle synthesis for oral solid dosage forms: A step toward clinical transition processes.

Nanomedicine provides various opportunities for addressing medical challenges associated with drug bioavailability, stability, and efficacy. In particular, oral nanoparticles (NPs) represent an alternative strategy to enhance the solubility and stability of active ingredients through the gastrointestinal tract. The nanocarriers could be used for both local and systemic targeting, enabling controlled release of encapsulated drugs. This approach allows more efficient therapies. In this work, we aim to develop reliable oral solid dosage forms incorporating NPs produced by either one pot synthesis or continuous production, following protocols that yield highly consistent outcomes, promoting their technology transfer and clinical use. Microfluidics technology was selected to allow an automated and highly productive synthetic approach suitable for the highly throughput production. In particular, innovative systems, which combine advantage of NPs and solid dosage formulation, were designed, developed, and characterized demonstrating the possibility to obtaining oral administration. The resulting NPs were thus carried on oral dosage forms, i.e., pellets and minitablets. NPs resulted stable after dosage forms manufacturing, leading to confidence also on protection of encapsulated drugs. Indomethacin was used as a tracer to test biopharmaceutical behaviour. Anti-inflammatories or cytotoxic chemotherapeutics could be vehiculated leading to a breakthrough in the treatment of severe diseases allowing the oral administration of these drugs. We believe that the advancement achieved with the results of our work paves the way for the progression of nanoproducts into clinical transition processes.

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Isavuconazonium Sulfate.

A Biopharmaceutics Classification System (BCS)-based biowaiver monograph is presented for isavuconazonium sulfate. A BCS-based biowaiver is a regulatory option to substitute appropriate in vitro data for in vivo bioequivalence studies. Isavuconazonium sulfate is the prodrug of isavuconazole, a broad-spectrum azole antifungal indicated for invasive fungal infections. While the prodrug can be classified as a BCS Class III drug with high solubility but low permeability, the parent drug can be classified as a BCS Class II drug with low solubility but high permeability. Interestingly, the in vivo behavior of both is additive and leads isavuconazonium sulfate to act like a BCS class I drug substance after oral administration. In this work, experimental solubility and dissolution data were evaluated and compared with available literature data to investigate whether it is feasible to approve immediate release solid oral dosage forms containing isavuconazonium sulfate according to official guidance from the FDA, EMA and/or ICH. The risks associated with waiving a prodrug according to the BCS-based biowaiver guidelines are reviewed and discussed, noting that current regulations are quite restrictive on this point. Further, results show high solubility but instability of isavuconazonium sulfate in aqueous media. Although experiments on the dissolution of the capsule contents confirmed 'very rapid' dissolution of the active pharmaceutical ingredient (API) isavuconazonium sulfate, its release from the commercial marketed capsule formulation Cresemba is limited by the choice of capsule shell material, providing an additional impediment to approval of generic versions via the BCS-Biowaiver approach.

Recent advances in dosage form design for the elderly: a review.

INTRODUCTION: With the increase in the elderly population and the prevalence of multiple medical conditions, medication adherence, and efficacy have become crucial for the effective management of their health. The aging population faces unique challenges that need to be addressed through advancements in drug delivery systems and formulation technologies. AREAS COVERED: The current review highlights the recent advances in dosage form design for older individuals, with consideration of their specific physiological and cognitive changes. Various dosage forms, such as modified-release tablets/capsules, chewable tablets, and transdermal patches, can be tailored to meet the specific needs of elderly patients. Advancements in drug delivery systems, such as nanotherapeutics, additive manufacturing (three-dimensional printing), and drug-food combinations, improve drug delivery and efficacy and overcome challenges, such as dysphagia and medication adherence. EXPERT OPINION: Regulatory guidelines and considerations are crucial in ensuring the safe utilization of medications among older adults. Important factors to consider include geriatric-specific guidelines, safety considerations, labeling requirements, clinical trial considerations, and adherence and accessibility considerations.

Quality of measuring devices enclosed with paediatric oral liquid dosage forms of medicines registered in Sri Lanka.

INTRODUCTION: Oral liquid dosage forms remain popular in several middle income countries. The accuracy of liquid dosage form dosing depends on the accuracy and availability of measuring devices. Lack of quality oral liquid measuring devices will lead to medication errors. Hence there is an urgent need to describe the quality of manufacturer supplied measuring devices enclosed with paediatric oral liquid dosage forms currently registered in Sri Lanka. METHODOLOGY: Standards for measuring devices were developed after a detailed literature search. Multidisciplinary panel rated each standard for the necessity criteria on a 9 point Likert scale. Standards with overall panel median score of ≥ 7 with agreement were selected. A cross-sectional study was done. All the measuring devices, labels and instructions enclosed with the registered products were assessed against the standards developed. Three volumes of liquid antibacterials were measured using the enclosed measuring device. Accuracy of the volumes was measured. RESULTS: Of the total products (n = 202) only 126 were packed with a dosing device. Around quarter of the oral liquid dosage forms (n = 36) did not have a measuring device. More than half of the measuring devices aligned with all the standards developed. Out of 44 oral liquid paediatric antimicrobials measuring cups (n = 25, 56.8%, 95% CI: 41%-72%) were enclosed more and less error was seen with measuring cups. CONCLUSION: The quality of oral liquid measuring devices were not satisfactory. Quality could be further improved if the regulatory body request the manufactures/importers to adhere to the standards developed. Correct volumes were not measured using the measuring devices provided with the liquid antimicrobial agents.

Genetic Variation and Sensory Perception of a Pediatric Formulation of Ibuprofen: Can a Medicine Taste Too Good for Some?

There is wide variation in how individuals perceive the chemosensory attributes of liquid formulations of ibuprofen, encompassing both adults and children. To understand personal variation in the taste and chemesthesis properties of this medicine, and how to measure it, our first scientific strategy centered on utilizing trained adult panelists, due to the complex and time-consuming psychophysical tasks needed at this initial stage. We conducted a double-blind cohort study in which panelists underwent whole-genome-wide genotyping and psychophysically evaluated an over-the-counter pediatric medicine containing ibuprofen. Associations between sensory phenotypes and genetic variation near/within irritant and taste receptor genes were determined. Panelists who experienced the urge to cough or throat sensations found the medicine less palatable and sweet, and more irritating. Perceptions varied with genetic ancestry; panelists of African genetic ancestry had fewer chemesthetic sensations, rating the medicine sweeter, less irritating, and more palatable than did those of European genetic ancestry. We discovered a novel association between TRPA1 rs11988795 and tingling sensations, independent of ancestry. We also determined for the first time that just tasting the medicine allowed predictions of perceptions after swallowing, simplifying future psychophysical studies on diverse populations of different age groups needed to understand genetic, cultural-dietary, and epigenetic factors that influence individual perceptions of palatability and, in turn, adherence and the risk of accidental ingestion.

Imaging techniques for studying solid dosage formulation: Principles and applications.

Classic methods for evaluating the disintegration and dissolution kinetics of solid dosage forms are no longer sufficient to meet the growing demands in the pharmaceutical field. Hence, scientists have turned to imaging techniques and computer technology to develop innovative visualization methods. These methods allow for a visual understanding of the disintegration or dissolution process and offer valuable insights into the drug release kinetics. This article aims to provide an overview of the commonly used imaging techniques and their applications in studying the disintegration or dissolution of solid dosage forms. Therefore, imaging presents a novel and alternative approach to understanding the mechanisms of disintegration and dissolution in the formulation study of solid dosages.

Multiscale X-ray imaging and characterisation of pharmaceutical dosage forms.

A correlative, multiscale imaging methodology for visualising and quantifying the morphology of solid dosage forms by combining ptychographic X-ray computed nanotomography (PXCT) and scanning small- and wide-angle X-ray scattering (S/WAXS) is presented. The methodology presents a workflow for multiscale analysis, where structures are characterised from the nanometre to millimetre regime. Here, the method is demonstrated by characterising a hot-melt extruded, partly crystalline, solid dispersion of carbamazepine in ethyl cellulose. Characterisation of the morphology and solid-state phase of the drug in solid dosage forms is central as this affects the performance of the final formulation. The 3D morphology was visualised at a resolution of 80 nm over an extended volume through PXCT, revealing an oriented structure of crystalline drug domains aligned in the direction of extrusion. Scanning S/WAXS showed that the nanostructure is similar over the cross section of the extruded filament, with minor radial changes in domain sizes and degree of orientation. The polymorphic forms of carbamazepine were qualified with WAXS, showing a heterogeneous distribution of the metastable forms I and II. This demonstrates the methodology for multiscale structural characterization and imaging to enable a better understanding of the relationships between morphology, performance, and processing conditions of solid dosage forms.

3D screen printing technology enables fabrication of oral drug dosage forms with freely tailorable release profiles.

3D printing offers new opportunities to customize oral dosage forms of pharmaceuticals for different patient populations, improving patient safety, care, and compliance. Although several notable 3D print technologies have been developed, such as inkjet printing, powder-based printing, selective laser sintering (SLS) printing, and fused deposition modelling (FDM), among others, their capacity is often limited by the number of printing heads. 3D screen-printing (3DSP) is based on a classic flatbed screen printing that is widely used in industrial applications for technical applications. 3DSP can build up thousands of units per screen simultaneously, enabling mass customization of pharmaceuticals. Here, we use 3DSP to investigate two novel paste formulations: immediate-release (IR) and extended-release (ER) using Paracetamol (acetaminophen) as the active pharmaceutical ingredient (API). Both disk-shaped and donut-shaped tablets were fabricated using one or both pastes to design drug delivery systems (DDS) with tailored API release profiles. The size and mass of the produced tablets demonstrated high uniformity. Characterization of the tablets physical properties, such as breaking force (25-39 N) and friability (0.002-0.237%), adhering to Ph. Eur (10th edition). Finally, drug release tests with a phosphate buffer at pH 5.8 showed Paracetamol release depended on the IR- and ER paste materials and their respective compartment size of the composite DDS, which can be readily varied using 3DSP. This work further demonstrates the potential of 3DSP to manufacture complex oral dosage forms exhibiting custom release functionalities for mass production.

Combinatorial 3D printed dosage forms for a two-step and controlled drug release.

Fused deposition modeling (FDM) and selective laser sintering (SLS) are two of the most employed additive manufacturing (AM) techniques within the pharmaceutical research field. Despite the numerous advantages of different AM methods, their respective drawbacks have yet to be fully addressed, and therefore combinatorial systems are starting to emerge. In the present study, hybrid systems comprising SLS inserts and a two-compartment FDM shell are developed to achieve controlled release of the model drug theophylline. Via the use of SLS a partial amorphization of the drug is demonstrated, which can be advantageous in the case of poorly soluble drugs, and it is shown that sintering parameters can regulate the dosage and release kinetics of the drug from the inserts. Furthermore, via different combinations of inserts within the FDM-printed shell, various drug release patterns, such as a two-step or prolonged release, can be achieved. The study serves as a proof of concept, highlighting the advantages of combining two AM techniques, both to overcome their respective shortcomings and to develop modular and highly tunable drug delivery devices.

Parameters to consider for successful medication use in older adults - An AGePOP review.

Older adults are the main users of medicine and due to common multimorbidity they are often confronted with a complex medication management. This review article provides a brief overview on aspects of medication management, i.e., maintaining a stock of the required medicine, understanding and following the instructions for use, coping with the primary and secondary packaging, as well as the preparation prior to use. However, the main focus is on the drug intake itself and the review provides an overview of the current understanding of real life dosing conditions in older adults and geriatric patients. It elaborates the acceptability of dosage forms, in particular solid oral dosage forms as they represent the majority of dosage forms taken by this patient population. An improved understanding of the needs of older adults and geriatric patients, their acceptability of various dosage forms, and the circumstances under which they manage their medications will allow for the design of more patient-centric drug products.

Paediatric solid oral dosage forms for combination products: Improving in vitro swallowability of minitablets using binary mixtures with pellets.

There is a growing interest in enhancing the acceptability of paediatric pharmaceutical formulations. Solid oral dosage forms (SODF), especially multiparticulates, are being considered as an alternative to liquid formulations, but they may compromise palatability when large volumes are required for dosing. We hypothesised that a binary mixture of multiparticulates for paediatric use, designed to increase the formulation maximum packing fraction, could reduce the viscosity of the mixture in soft food and facilitate swallowing. Using the Paediatric Soft Robotic Tongue (PSRT) - an in vitro device inspired by the anatomy and physiology of 2-year-old children - we investigated the oral phase of swallowing for multi-particulate formulations, i.e., pellets (350 and 700 µm particles), minitablets (MTs, 1.8 mm), and their binary mixtures (BM), by evaluating oral swallowing time, the percentage of particles swallowed, and post-swallow residues. We also conducted a systematic analysis of the effect of the administration method, bolus volume, carrier type, particle size, and particle volume fraction on pellets swallowability. The results demonstrated that the introduction of pellets affected the flowing ability of the carriers, increasing shear viscosity. The size of the pellets did not appear to influence particle swallowability but raising the particle volume fraction (v.f.) above 10% resulted in a decrease in the percentage of particles swallowed. At v.f. 0.4, pellets were easier to swallow (+ 13.1%) than MTs, being the administration method used highly dependent on the characteristics of the multi-particulate formulation under consideration. Finally, mixing MTs with only 24% of pellets improved particle swallowability, achieving swallowing levels similar to those of pellets alone. Thus, combining SODF, i.e., MTs and pellets, improves MT swallowability, and offers new possibilities for adjusting product palatability, being particularly attractive for combination products.