Artificial dermal repair for larger finger pulp defects: Satisfactory coverage with limitations in sensation and inevitable scar formation.

BACKGROUND: This prospective study aimed to evaluate the outcomes of the use of dermal templates for lengthy volar soft tissue defects (1.5-4 cm) in the fingers. METHODS: The volar soft tissue defects of 15 patients (19 fingers) were treated with Lando dermal template coverage between June 2022 and November 2022. We evaluated sensory recovery, scar formation, and overall appearance of the repair site at an average of 13 months (range, 12-17 months) of follow-up. RESULTS: The defect healed in all cases. We found an average static 2-point discrimination of 7 mm (range 4 to 14 mm). Scar formation was evident in all cases. The repair did not restore the bulkiness of the volar finger, especially in the finger with the bony exposure. Nail deformities and joint contracture were observed in some cases. CONCLUSION: Dermal template repair does not restore normal sensation and inevitably leads to scar formation when the defect is longer (>1.5 cm). Bulkiness of the volar finger is not restored in most patients, especially when there was bone or tendon exposure in the initial wound site.

The clinical effects of artificial dermis in the treatment of skin and soft tissue defects accompanied by bone or tendon exposure.

OBJECTIVE: The clinical effects of artificial dermis in treating skin and soft tissue defects accompanied by bone or tendon exposure were assessed. APPROACH: A retrospective analysis was conducted on the clinical data of 45 cases of skin and soft tissue defects accompanied by bone or tendon exposure admitted to the trauma surgery department of Fujian Provincial Hospital between February 2018 and August 2020. They were divided into the artificial dermis and control groups. The wound was assessed using the Vancouver Scar Scale (mVSS), and the postoperative visual analogue scale (VAS) scores were recorded at 3, 6, 9, and 12 months after surgery. At the 12-month after surgery, skin sensation recovery was evaluated using the criteria of the British Medical Research Council (BMRC). RESULTS: The cases included 26 males and 19 females, aged 50 to 85 years. All patients were followed up for an average of 13.8 months (range: 12-18 months). Compared with controls, the wound healing time of the observation group was longer (35.8 ± 10.6 vs. 28.5 ± 4.8, P = 0.007), without significant differences for the number of operations and length of hospitalization. The mVSS scores were not different between groups (Pgroup = 0.294), but the scores decreased with time (Ptime < 0.001), and the group×time interaction was significant (Pinteraction < 0.001). Similarly, the VAS scores were not different between groups (Pgroup = 0.667), but the scores decreased with time (Ptime < 0.001); the group×time interaction was not significant (Pinteraction = 0.274). At the 12-month mark following the operation, in the artificial dermis group, the MCRR score was S3+ in 23 patients, while it ranged from S0 to S3 in two patients; in the control group, S3+ was observed in 17 patients, and S0-S3 in three (P = 0.815). CONCLUSION: Artificial dermis treatment is considered a safe and effective alternative therapy for patients with skin and soft tissue defects accompanied by bone or tendon exposure who cannot tolerate or are unwilling to undergo autologous skin flap transplantation. It offers the advantages of minimal donor site trauma, simplicity in operation, and favorable postoperative functional recovery.

Copper-MOF and tannic acid-empowered composite cryogel as a skin substitute for accelerated deep wound healing.

The effective management of deep skin wounds remains a significant healthcare challenge that often deteriorates with bacterial infection, oxidative stress, tissue necrosis, and excessive production of wound exudate. Current medical approaches, including traditional wound dressing materials, cannot effectively address these issues. There is a great need to engineer advanced and multifunctional wound dressings to address this multifaceted problem effectively. Herein, a rationally designed composite cryogel composed of a Copper Metal-Organic Framework (Cu-MOF), tannic acid (TA), polyvinyl alcohol (PVA), and zein protein has been developed by freeze-thaw technique. Cryogels display a remarkable swelling capacity attributed to their interconnected microporous morphology. Moreover, dynamic mechanical behaviour with the characteristics of potent antimicrobial, antioxidant, and biodegradation makes it a desirable wound dressing material. It was further confirmed that the material is highly biocompatible and can release TA and copper ions in a controlled manner. In-vivo skin irritation in a rat model demonstrated that composite cryogel did not provoke any irritation/inflammation when applied to the skin of a healthy recipient. In a deep wound model, the composite cryogel significantly accelerates the wound healing rate. These findings highlight the multifunctional nature of composite cryogels and their promising potential for clinical applications as advanced wound dressings.

Ideal Living Skin Equivalents, From Old Technologies and Models to Advanced Ones: The Prospects for an Integrated Approach.

The development of technologies for the generation and transplantation of living skin equivalents (LSEs) is a significant area of translational medicine. Such functional equivalents can be used to model and study the morphogenesis of the skin and its derivatives, to test drugs, and to improve the healing of chronic wounds, burns, and other skin injuries. The evolution of LSEs over the past 50 years has demonstrated the leap in technology and quality and the shift from classical full-thickness LSEs to principled new models, including modification of classical models and skin organoids with skin derived from human-induced pluripotent stem cells (iPSCs) (hiPSCs). Modern methods and approaches make it possible to create LSEs that successfully mimic native skin, including derivatives such as hair follicles (HFs), sebaceous and sweat glands, blood vessels, melanocytes, and nerve cells. New technologies such as 3D and 4D bioprinting, microfluidic systems, and genetic modification enable achievement of new goals, cost reductions, and the scaled-up production of LSEs.

Approaches to scarless burn wound healing: application of 3D printed skin substitutes with dual properties of anti-infection and balancing wound hydration levels.

BACKGROUND: Severe burn wounds face two primary challenges: dysregulated cellular impairment functions following infection and an unbalanced wound hydration microenvironment leading to excessive inflammation and collagen deposition. These results in hypertrophic scar contraction, causing significant deformity and disability in survivors. METHODS: A three-dimensional (3D) printed double-layer hydrogel (DLH) was designed and fabricated to address the problem of scar formation after burn injury. DLH was developed using methacrylated silk fibroin (SFMA) and gelatin methacryloyl (GelMA) for the upper layer, and GelMA and hyaluronic acid methacryloyl (HAMA) for the lower layer. To combat infection, copper-epigallocatechin gallate (Cu-EGCG) was incorporated into the lower layer bioink, collectively referred to as DLS. To balance wound hydration levels, HaCaT cells were additionally encapsulated in the upper layer, designed as DLS/c. FINDINGS: DLH demonstrated suitable porosity, appropriate mechanical properties, and excellent biocompatibility. DLS exhibited potent antimicrobial properties, exerted anti-inflammatory effects by regulating macrophage polarisation, and may enhance angiogenesis through the HIF-1α/VEGF pathway. In the DLS/c group, animal studies showed significant improvements in epidermal formation, barrier function, and epidermal hydration, accompanied by reduced inflammation. In addition, Masson's trichrome and Sirius red staining revealed that the structure and ratio of dermal collagen in DLS/c resembled that of normal skin, indicating considerable potential for scarless wound healing. INTERPRETATION: This biomimetic matrix shows promise in addressing the challenges of burn wounds and aiming for scarless repair, with benefits such as anti-infection, epidermal hydration, biological induction, and optimised topological properties. FUNDING: Shown in Acknowledgements.

Bionic Artificial Skin Based on Self-Healable Ionogel Composites with Tailored Mechanics and Robust Interfaces.

Bionic artificial skin which imitates the features and functions of human skin, has broad applications in wearable human-machine interfaces. However, equipping artificial materials with skin-like mechanical properties, self-healing ability, and high sensitivity remains challenging. Here, inspired by the structure of human skin, an artificial skin based on ionogel composites with tailored mechanical properties and robust interface is prepared. Combining finite element analysis and direct ink writing (DIW) 3D printing technology, an ionogel composite with a rigid skeleton and an ionogel matrix is precisely designed and fabricated, realizing the mechanical anisotropy and nonlinear mechanical response that accurately mimic human skin. Robust interface is created through co-curing of the skeleton and matrix resins, significantly enhancing the stability of the composite. The realization of self-healing ability and resistance to crack growth further ensure the remarkable durability of the artificial skin for sensing application. In summary, the bionic artificial skin mimics the characteristics of human skin, including mechanical anisotropy, nonlinear mechanical response, self-healing capability, durability and high sensitivity when applied as flexible sensors. These strategies provide strong support for the fabrication of tissue-like materials with adaptive mechanical behaviors.

Multilayered collagen-lipid hybrid nanovesicles for retinol stabilization and efficient skin delivery.

Lipid-based nanocarriers have been extensively utilized for the solubilization and cutaneous delivery of water-insoluble active ingredients in skincare formulations. However, their practical application is often limited by structural instability, leading to premature release and degradation of actives. Here we present highly robust multilamellar nanovesicles, prepared by the polyionic self-assembly of unilamellar vesicles with hydrolyzed collagen peptides, to stabilize all-trans-retinol and enhance its cutaneous delivery. Our results reveal that the reinforced multilayer structure substantially enhances dispersion stability under extremely harsh conditions, like freeze-thaw cycles, and stabilizes the encapsulated retinol. Interestingly, these multilamellar vesicles exhibit significantly lower cytotoxicity to human dermal fibroblasts than their unilamellar counterparts, likely due to their smaller particle number per weight, minimizing potential disruptions to cellular membranes. In artificial skin models, retinol-loaded multilamellar vesicles effectively upregulate collagen-related gene expression while suppressing the synthesis of metalloproteinases. These findings suggest that the robust multilamellar vesicles can serve as effective nanocarriers for the efficient delivery and stabilization of bioactive compounds in cutaneous applications.

Summary of the skin substitute revolution - skin coverings in the modern era of healthcare.

Skin substitutes and covers are crucial across surgical disciplines, promoting interdisciplinary collaboration to meet varied clinical needs. While some medical professionals may encounter these products infrequently in their practice, understanding their properties and applications is paramount to provide optimal patient care. In this overview, we aim to provide healthcare professionals with essential information regarding skin substitutes and covers, equipping them with knowledge to navigate their use effectively across different clinical scenarios and to optimize patient outcomes. The speed of progress in tissue engineering and regenerative medicine is notable, driven by collaborative efforts among scientists, engineers, and clinicians. Technological advancements, increased funding, and a deeper understanding of cellular and molecular processes have accelerated research and development. However, challenges remain, such as achieving vascularization in engineered tissues, addressing immune responses, and ensuring long-term functionality of regenerated organs. Despite these hurdles, the field continues to evolve rapidly, offering hope for transformative medical solutions that may redefine the treatment landscape soon. In this article, we review the current selected commercially available epidermal, dermal, and total skin substitutes for wound healing.

Towards the development of sensation-enabled skin substitutes.

Recent advances in cell and biofabrication technologies have contributed to the development of complex human organs. In particular, several skin substitutes are being generated using tissue engineering and regenerative medicine (TERM) technologies. However, recent studies mainly focus on the restoration of the dermis and epidermis layers rather than the regeneration of a fully functional innervated skin organ. Innervation is a critical step in functional tissue repair which has been overlooked in the current TERM studies. In the current study, we highlight the importance of sensation in the skin as the largest sensory organ in the human body. In large non-healing skin wounds, the skin sensation is severely diminished or completely lost and ultimately lead to chronic pain and wound healing process interruption. Current therapeutics for restoring skin sensation after trauma are limited. Recent regenerative medicine-based studies could successfully induce neural networks in skin substitutes, but the effectiveness of these technologies in enhancing sensory capability needs further investigation.

Multifunctional Porous Bilayer Artificial Skin for Enhanced Wound Healing.

Meeting the exacting demands of wound healing encompasses rapid coagulation, superior exudate absorption, high antibacterial efficacy, and imperative support for cell growth. In this study, by emulating the intricate structure of natural skin, we prepare a multifunctional porous bilayer artificial skin to address these critical requirements. The bottom layer, mimicking the dermis, is crafted through freeze-drying a gel network comprising carboxymethyl chitosan (CMCs) and gelatin (GL), while the top layer, emulating the epidermis, is prepared via electrospinning poly(l-lactic acid) (PLLA) nanofibers. With protocatechuic aldehyde and gallium ion complexation (PA@Ga) as cross-linking agents, the bottom PA@Ga-CMCs/GL layer featured an adjustable pore size (78-138 µm), high hemostatic performance (67s), and excellent bacterial inhibition rate (99.9%), complemented by an impressive liquid-absorbing capacity (2000% swelling rate). The top PLLA layer, with dense micronanostructure and hydrophobic properties, worked as a shield to effectively thwarted liquid or bacterial penetration. Furthermore, accelerated wound closure, reduced inflammatory responses, and enhanced formation of hair follicles and blood vessels are achieved by the porous artificial skin covered on the surface of wound. Bilayer artificial skin integrates the advantages of nanofibers and freeze-drying porous materials to effectively replicate the protective properties of the epidermal layer of the skin, as well as the cell migration and tissue regeneration of the dermis. This bioabsorbable artificial skin demonstrates structural and functional comparability to real skin, which would advance the field of wound care through its multifaceted capabilities.

In Situ Structural Densification of Hydrogel Network and Its Interface with Electrodes for High-Performance Multimodal Artificial Skin.

The multisensory responsiveness of hydrogels positions them as promising candidates for artificial skin, whereas the mismatch of modulus between soft hydrogels and hard electrodes as well as the poor adhesion and conductance at the interface greatly impairs the stability of electronics devices. Herein, we propose an in situ postprocessing approach utilizing electrochemical reactions between metals (Zn, etc.) and hydrogels to synergistically achieve strong adhesion of the hydrogel-electrode interface, low interfacial impedance, and local strain isolation due to the structural densification of the hydrogel network. The mechanism is that Zn electrochemically oxidizes to Zn2+ and injects into the hydrogel, gradually forming a mechanically interlocked structure, Zn2+-polymer dual-helix structural nodes, and a high-modulus ZnO from the surface to the interior. Compared to untreated samples, the treated sample displays 8.7 times increased interfacial adhesion energy between the hydrogel and electrode (87 J/m2), 95% decreased interfacial impedance (218.8 Ω), and a high-strain isolation efficiency (εtotal/εisolation > 400). Akin to human skin, the prepared sensor demonstrates multimodal sensing capabilities, encompassing highly sensitive strain perception and simultaneous perception of temperature, humidity, and oxygen content unaffected by strain interference. This easy on-chip preparation of hydrogel-based multimodal sensor array shows great potential for health and environment monitoring as artificial skin.

3D Bioprinting of Artificial Skin Substitute with Improved Mechanical Property and Regulated Cell Behavior through Integrating Patterned Nanofibrous Films.

Three-dimensional (3D) bioprinting has advantages for constructing artificial skin tissues in replicating the structures and functions of native skin. Although many studies have presented improved effect of printing skin substitutes in wound healing, using hydrogel inks to fabricate 3D bioprinting architectures with complicated structures, mimicking mechanical properties, and appropriate cellular environments is still challenging. Inspired by collagen nanofibers withstanding stress and regulating cell behavior, a patterned nanofibrous film was introduced to the printed hydrogel scaffold to fabricate a composite artificial skin substitute (CASS). The artificial dermis was printed using gelatin-hyaluronan hybrid hydrogels containing human dermal fibroblasts with gradient porosity and integrated with patterned nanofibrous films simultaneously, while the artificial epidermis was formed by seeding human keratinocytes upon the dermis. The collagen-mimicking nanofibrous film effectively improved the tensile strength and fracture resistance of the CASS, making it sewable for firm implantation into skin defects. Meanwhile, the patterned nanofibrous film also provided the biological cues to guide cell behavior. Consequently, CASS could effectively accelerate the regeneration of large-area skin defects in mouse and pig models by promoting re-epithelialization and collagen deposition. This research developed an effective strategy to prepare composite bioprinting architectures for enhancing mechanical property and regulating cell behavior, and CASS could be a promising skin substitute for treating large-area skin defects.

Artificial keloid skin models: understanding the pathophysiological mechanisms and application in therapeutic studies.

Keloid is a type of scar formed by the overexpression of extracellular matrix substances from fibroblasts following inflammation after trauma. The existing keloid treatment methods include drug injection, surgical intervention, light exposure, cryotherapy, etc. However, these methods have limitations such as recurrence, low treatment efficacy, and side effects. Consequently, studies are being conducted on the treatment of keloids from the perspective of inflammatory mechanisms. In this study, keloid models are created to understand inflammatory mechanisms and explore treatment methods to address them. While previous studies have used animal models with gene mutations, chemical treatments, and keloid tissue transplantation, there are limitations in fully reproducing the characteristics of keloids unique to humans, and ethical issues related to animal welfare pose additional challenges. Consequently, studies are underway to create in vitro artificial skin models to simulate keloid disease and apply them to the development of treatments for skin diseases. In particular, herein, scaffold technologies that implement three-dimensional (3D) full-thickness keloid models are introduced to enhance mechanical properties as well as biological properties of tissues, such as cell proliferation, differentiation, and cellular interactions. It is anticipated that applying these technologies to the production of artificial skin for keloid simulation could contribute to the development of inflammatory keloid treatment techniques in the future.

A three-dimensionally architected electronic skin mimicking human mechanosensation.

Human skin sensing of mechanical stimuli originates from transduction of mechanoreceptors that converts external forces into electrical signals. Although imitating the spatial distribution of those mechanoreceptors can enable developments of electronic skins capable of decoupled sensing of normal/shear forces and strains, it remains elusive. We report a three-dimensionally (3D) architected electronic skin (denoted as 3DAE-Skin) with force and strain sensing components arranged in a 3D layout that mimics that of Merkel cells and Ruffini endings in human skin. This 3DAE-Skin shows excellent decoupled sensing performances of normal force, shear force, and strain and enables development of a tactile system for simultaneous modulus/curvature measurements of an object through touch. Demonstrations include rapid modulus measurements of fruits, bread, and cake with various shapes and degrees of freshness.

Evaluating micronized adipose tissue niche and artificial dermis grafts following nonmelanoma skin cancer excision: a pilot study.

BACKGROUND: Recently, micronized adipose tissue (MAT) grafts have shown promising results in wound healing, including diabetic ulcers. OBJECTIVE: To assess the possibility of using 3D printed MAT niche grafts in the management of skin and soft tissue defects resulting from non-melanoma skin cancer (NMSC) resections. MATERIALS AND METHODS: A retrospective feasibility study was conducted on patients with skin and soft tissue defects resulting from NMSC resections. Twenty-one patients were treated using either artificial dermis (n = 11) or MAT niche (n = 10) grafting. Healing time and POSAS scores were compared. The Mann-Whitney U test and the Pearson chi-square test were used in statistical analysis to compare between and within groups based on preoperative and postoperative measurements. RESULTS: Wounds in the MAT niche group reepithelialized significantly faster than those in the artificial dermis group (mean [SD] 39.2 [11.4] days vs 63.7 [34.8] days; P = .04). In the 21 scar parameters evaluated, the MAT niche group demonstrated significantly superior outcomes in only 2 parameters based on operator assessment scores: relief (mean [SD] 1.6 [0.7] vs 2.2 [0.6]; P = .047) and scar contracture (mean [SD] 1.3 [0.5] vs 2.5 [1.0]; P = .011). CONCLUSION: This study proves the feasibility of exploring the effects of MAT niche grafting following NMSC excision on healing time and specific parameters of scarring, including scar relief and scar contracture.

Use of Integra® on avascular tissue.

Integra® (Integra LifeSciences) is a well-known dermal regeneration template used in partial and full-thickness wound reconstruction. It can be applied directly on to vascular tissue to create a bed for a skin graft, which is often placed in a second surgery. We present our experience of its novel use in oral and maxillofacial surgery patients, using it directly on bone and cartilage (avascular tissue) without further skin grafting. Patients who required full-thickness excision of lesions down to bone or cartilage and who were treated using Integra® were included. After scalp or ear lesion resection, the collagenous dermal layer of Integra® was placed directly on to bone or cartilage and, along with its outer silicone epidermal layer, secured to the defect with absorbable sutures and a bolster dressing. The wounds were kept dry for 14 days, at which point the dressing and silicone were removed and patients continued regular wound care. Seventeen patients were included, 15 of whom had squamous cell carcinoma. One was lost to follow up. The rest achieved complete healing of the defect. Histology showed epidermis developing on the Integra® surface and at one year, the appearance of normal scarred skin. This novel approach could redefine the uses of Integra®, avoiding the need for free-flap surgery or skin grafting when reconstructing large defects. Further resection of close margins or recurrence is easier after reconstruction using dermal regeneration material than after reconstruction with a local or free flap.

Skin graft with dermis and appendages generated in vivo by cell competition.

Autologous skin grafting is a standard treatment for skin defects such as burns. No artificial skin substitutes are functionally equivalent to autologous skin grafts. The cultured epidermis lacks the dermis and does not engraft deep wounds. Although reconstituted skin, which consists of cultured epidermal cells on a synthetic dermal substitute, can engraft deep wounds, it requires the wound bed to be well-vascularized and lacks skin appendages. In this study, we successfully generate complete skin grafts with pluripotent stem cell-derived epidermis with appendages on p63 knockout embryos' dermis. Donor pluripotent stem cell-derived keratinocytes encroach the embryos' dermis by eliminating p63 knockout keratinocytes based on cell-extracellular matrix adhesion mediated cell competition. Although the chimeric skin contains allogenic dermis, it is engraftable as long as autologous grafts. Furthermore, we could generate semi-humanized skin segments by human keratinocytes injection into the amnionic cavity of p63 knockout mice embryos. Niche encroachment opens the possibility of human skin graft production in livestock animals.

Three-dimensional bioprinting of tissue-engineered skin: Biomaterials, fabrication techniques, challenging difficulties, and future directions: A review.

As an emerging new manufacturing technology, Three-dimensional (3D) bioprinting provides the potential for the biomimetic construction of multifaceted and intricate architectures of functional integument, particularly functional biomimetic dermal structures inclusive of cutaneous appendages. Although the tissue-engineered skin with complete biological activity and physiological functions is still cannot be manufactured, it is believed that with the advances in matrix materials, molding process, and biotechnology, a new generation of physiologically active skin will be born in the future. In pursuit of furnishing readers and researchers involved in relevant research to have a systematic and comprehensive understanding of 3D printed tissue-engineered skin, this paper furnishes an exegesis on the prevailing research landscape, formidable obstacles, and forthcoming trajectories within the sphere of tissue-engineered skin, including: (1) the prevalent biomaterials (collagen, chitosan, agarose, alginate, etc.) routinely employed in tissue-engineered skin, and a discerning analysis and comparison of their respective merits, demerits, and inherent characteristics; (2) the underlying principles and distinguishing attributes of various current printing methodologies utilized in tissue-engineered skin fabrication; (3) the present research status and progression in the realm of tissue-engineered biomimetic skin; (4) meticulous scrutiny and summation of the extant research underpinning tissue-engineered skin inform the identification of prevailing challenges and issues.