Heavy metals in offal and canned food sold in the Malaysian market.

Food contaminated with heavy metals poses a serious threat to consumers. This study aims to assess levels of lead (Pb) and cadmium (Cd) in offals of chicken, cattle, and pig as well as tin (Sn) in canned food. A total of 378 offal samples was collected from wet markets, while 218 canned food samples were purchased locally. Samples were digested using a microwave before analysis with inductively coupled plasma mass spectrometry (ICP-MS). Pb was determined, highest in cattle lung (0.11 ± 0.20 mg/kg) followed by cattle spleen (0.09 ± 0.14 mg/kg), and cattle tripe (0.09 ± 0.12 mg/kg). For Cd, the highest concentrations were in cattle liver (0.13 ± 0.12 mg/kg), pig liver (0.08 ± 0.05 mg/kg), and chicken liver (0.03 ± 0.02 mg/kg). Significant variations of Sn levels existed in different canned food categories with 3.21% samples (n = 7) exceeded the maximum level of 250 mg/kg set by Codex Alimentarius. All offal samples were below the Malaysian regulatory limits, indicating their safety for human consumption. However, Sn levels varied significantly among canned food categories, with the highest levels found in canned pineapple chunks in syrup, mixed pineapple cubes in syrup, pineapple slices and longan. Samples exceeding the maximum level set by Codex Alimentarius may pose a risk to consumers.

A Bio-Indicator Pilot Study Screening Selected Heavy Metals in Female Hair, Nails, and Serum from Lifestyle Cosmetic, Canned Food, and Manufactured Drink Choices.

Lifestyles, genetic predispositions, environmental factors, and geographical regions are considered key factors of heavy metals initiatives related to health issues. Heavy metals enter the body via the environment, daily lifestyle, foods, beverages, cosmetics, and other products. The accumulation of heavy metals in the human body leads to neurological issues, carcinogenesis, failure of multiple organs in the body, and a reduction in sensitivity to treatment. We screened for Cr, Al, Pb, and Cd in selected foods, beverages, and cosmetics products depending on questionnaire outcomes from female volunteers. We also screened for Cr, Al, Pb, and Cd on hair, nails, and serum samples using inductively coupled plasma mass spectrometry (ICP-MS) from the same volunteers, and we analyzed the serum cholinesterase and complete blood picture (CBC). We performed an AutoDock study on Cr, Al, Pb, and Cd as potential ligands. Our results indicate that the most elevated heavy metal in the cosmetic sample was Al. In addition, in the food and beverages samples, it was Pb and Al, respectively. The results of the questionnaire showed that 71 percent of the female volunteers used the studied cosmetics, food, and beverages, which were contaminated with Cr, Al, Pb, and Cd, reflecting the high concentration of Cr, Al, Cd, and Pb in the three different types of biological samples of sera, nails, and hair of the same females, with 29 percent of the female volunteers not using the products in the studied samples. Our results also show an elevated level of cholinesterase in the serum of group 1 that was greater than group 2, and this result was confirmed by AutoDock. Moreover, the negative variation in the CBC result was compared with the reference ranges. Future studies should concentrate on the actions of these heavy metal contaminations and their potential health consequences for various human organs individually.

Trends of bisphenol A occurrence in canned food products from 2008-2020.

It is known that the industry already abandoned the use of bisphenol A (BPA)-based epoxy resins as internal coatings for some canned food products (e.g. infant formula, soups). The presence of bisphenol A (BPA) in foods has also been extensively investigated, especially since late 2000. However, information on temporal trends of BPA occurrence in foods is very limited. It is not clear if BPA-based epoxy resins are still being used in internal coating for many other canned foods and if the overall exposure to BPA through consumption of canned foods has significantly decreased. As part of the Canadian total diet study (TDS) program, we have been analysing food samples for BPA since 2008. In this study, results of BPA in samples of different composite canned foods from 2008-2020 TDS were reported. Clear temporal trends were observed for canned fish and soups, with BPA levels being significantly reduced since 2014 for canned fish products and 2017 for canned soups. Temporal trends were not observed for canned evaporated milk, luncheon meats, and vegetables, with even the highest levels of BPA being detected in recent samples for evaporated milk (57 ng/g), luncheon meats (56 ng/g), and baked beans (103 ng/g). This seems to indicate that BPA-based epoxy resins are still being used in the internal coatings for these canned foods products. Thus, analysis of canned food samples for BPA should be continued for exposure assessment.

Quantitative analysis of bisphenol A eluted into canned tomato and mackerel by matrix-assisted laser desorption ionization mass spectrometry using anthracene as matrix.

Quantitative analysis of bisphenol A (BPA) was performed by matrix-assisted laser desorption ionization mass spectrometry. It was found that BPA was ionized as deprotonated species when anthracene was used as the matrix. A peak of deprotonated BPA and a peak assignable to epoxy resin were observed on analysis of liquids in canned tomato and mackerel samples. In addition, many identical peaks were observed from the liquids in both cans, indicating that epoxy resin was degraded and BPA was eluted into the canned tomato and mackerel during the storage period. It was suggested that the mackerel heat-treatment process and the acidity of tomato were responsible for the elution of BPA. Using bisphenol B (BPB) as the internal standard, the concentrations of BPA were determined to be 0.55 ± 0.05 and 1.72 ± 0.13 ng/µL (µg/mL) for the canned tomato and mackerel samples, respectively. These canned products were imported goods, and their BPA levels exceeded the safe concentration recommended by The Can Manufacturers Institute of Japan. The results indicate that consumers should exercise caution when consuming canned products particularly those manufactured overseas, which have different safety standards.

High sensitivity for detecting trace Sn2+ in canned food using novel covalent organic frameworks.

Tin (Sn) element plays a vital role in the human body, and its detection is a mandatory inspection item for canned food. The application of covalent organic frameworks (COFs) in fluorescence detection has received extensive attentions. In this work, we designed a kind of novel COFs (COF-ETTA-DMTA) with high specific surface area (353.13 m2/g) by solvothermal synthesis using 2,5-dimethoxy-1,4-dialdehyde and tetra (4-aminophenyl) ethylene as precursors. It shows fast response time (about 50 s), low detection limit (228 nM) and good linearity (R2 = 0.9968) for the detection of Sn2+. Via coordination behavior, the recognition mechanism of COFs toward Sn2+ was simulated and verified by the small molecule with the same functional unit. More importantly, this COFs was successfully applied to identify Sn2+ in solid canned food (luncheon pork, canned fish, canned red kidney beans) with satisfactory results. This work provides a new approach for determining metal ions with COFs taking the advantage of their natural rich reaction set and specific surface area, improving the detection sensitivity and capacity.

Histologic examination of canned cat food.

Cat food production is a billion-dollar industry in the United States, with most pet owners trusting pet food companies to provide their pets with complete nutrition. Moist or canned cat food is healthier than dry kibble for cats due to its higher water content promoting healthy kidney function, but ingredient labels on canned cat food are lengthy with ambiguous terminology including 'animal by-products.' Forty canned cat food samples were collected from grocery stores and were processed using routine histologic methods. Hematoxylin and eosin-stained tissue sections were evaluated microscopically to determine the cat food content. Many brands and flavors were composed of well-preserved skeletal muscles admixed with various animal organs, which closely approximates nutritional components found in natural feline prey. However, several samples demonstrated marked degenerative changes suggesting a delay in food processing and potential decrease in nutrient content. Four samples contained cuts consisting of skeletal muscle only with no organ meat. Surprisingly, 10 samples contained fungal spores and 15 demonstrated refractile particulate matter. A cost analysis demonstrated that although the overall quality of canned cat food increases as the average cost per ounce increases, low-cost high-quality canned cat food is available.

Selective and ratiometric fluorescence sensing of bisphenol A in canned food based on portable fluorescent test strips.

In this study, a conversion method and molecular imprinting technology were used to design molecularly imprinted polymers (MIP)-based ratiometric fluorescence test papers. The ZnO quantum dots (ZnO QDs) acted as the background quantum dots and ZIF-8 raw material. Carbon dots (CDs) were used as the identification signals. The imprinting layer achieved a selective function. Therefore, a ZnO@ZIF-8/CDs@MIPs sensor was designed for the detection of Bisphenol A (BPA). The sensor exhibited a fast response time for BPA detection. In addition, the sensor demonstrated that effective detection of BPA can still be achieved in complex environments. The detection limit of this sensor was 0.778 nM with a linear range of 0-60 nM. The corresponding test solutions exhibited clear changes from blue to yellow. The selectivity experiments results demonstrated that ZnO@ZIF-8/CDs@MIPs only exhibit excellent selective recognition effect for BPA. ZnO@ZIF-8/CDs@MIPs-2 was used for the detection of BPA in canned food and compared with the results of HPLC detection of BPA. The two spiked recovery ranges were 96.58-102.04% and 97.43-103.82%, respectively. In addition, the prepared ZnO@ZIF-8/CDs@MIPs-2 test paper visually recognized BPA under ultraviolet light. This study provides guidelines for the design and application of fluorescent test papers for quick detection in practical applications.

A probabilistic approach to model bisphenol A (BPA) migration from packaging to meat products.

Bisphenol A (BPA), a synthetic chemical which has raised concerns due to its potential toxicological effects on humans, has been widely detected in canned and non-canned meat and meat products. This study estimated BPA migration from packaging to non-canned and canned meat products by developing two probabilistic models. BPA concentration data in packaging materials were collated, including polyethylene terephthalate, polyvinyl chloride, epoxy-based coatings, and polyester-based coatings. Migration ratios were calculated from migration tests of BPA molecules moving from packaging to food simulants. The predictive model revealed that the BPA migration concentration from packaging ranges from 0.017 to 0.13 (5th-95th percentile) µg kg-1 with a simulated mean of 0.056 µg kg-1 in non-canned meat products. This is in stark contrast to the simulated mean of 134.57 (5th-95th percentile: 59.17-223.25) µg kg-1 for canned meat products. Nevertheless, plastic packaging was estimated to contribute only 3 % of BPA levels in non-canned meat products. The sensitivity analysis showed that the contact area of meat products with films is the most sensitive parameter of the plastic packaging migration model. It is concluded that plastic packaging may not be the only or dominant source of BPA in non-canned meat products.

Chemical contaminants in canned food and can-packaged food: a review.

Canning, as a preservation technique, is widely used to extend the shelf life as well as to maintain the quality of perishable foods. During the canning process, most of the microorganisms are killed, reducing their impact on food quality and safety. However, the presence of a range of undesirable chemical contaminants has been reported in canned foods and in relation to the canning process. The present review provides an overview of these chemical contaminants, including metals, polymeric contaminants and biogenic amine contaminants. They have various origins, including migration from the can materials, formation during the canning process, or contamination during steps required prior to canning (e.g. the disinfection step). Some other can-packaged foods (e.g. beverages or milk powder), which are not canned foods by definition, were also discussed in this review, as they have been frequently studied simultaneously with canned foods in terms of contamination. The occurrence of these contaminants, the analytical techniques involved, and the factors influencing the presence of these contaminants in canned food and can-packaged food are summarized and discussed.

GA-AuNP@Tollens' complex as a highly sensitive plasmonic nanosensor for detection of formaldehyde and benzaldehyde in preserved food products.

Food preservatives nowadays are widely used chemicals throughout the food industries due to their commercial importance in increasing the shelf life of foods. But daily consumption of these preserved food products may be fatal to human health. Among different aldehydic compounds, formaldehyde and benzaldehyde are mainly used for preservation. Therefore, we reported a study on simple, selective and sensitive non-enzymatic detection of formaldehyde and benzaldehyde using GA-AuNP@Tollens'. Plasmonic resonance of GA-AuNP@Tollens' was taken as the basis for sensing formaldehyde and benzaldehyde in the linear range of 10-150 nM and 0.15-0.75 µM respectively. Both optimization and detection were acquired at UV absorbance of 409 nm. Detection limit of formaldehyde and benzaldehyde obtained through the proposed method was 20.08 nM and 0.12 µM respectively. Smartphone based detection method showed good linearity with R-Square value of 0.95 for both analytes. Lastly, GA-AuNP@Tollens' was implemented for the quantification of analytes in real samples.

Effective enrichment and detection of bisphenol diglycidyl ether, novolac glycerol ether and their derivatives in canned food using a novel magnetic sulfonatocalix[6]arene covalent cross-linked polymer as the adsorbent.

A core-shell magnetic sulfonatocalix[6]arene covalently cross-linked polymer was proposed as a magnetic adsorbent, combined with ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) for the enrichment and determination of epoxy derivatives in canned foods. The adsorbent has high density of host-guest recognition functional groups, abundant binding sites and suitable cavity size, showing good extraction performance for epoxy derivatives. Quantum chemical simulation calculations provedmultiple interaction forces in the adsorption process. Theextractionparameterswere investigated. Under optimized experimental conditions, 13 kinds of target analytes showed low detection limits (0.0072-0.023 ng/g) and good precisions (RSDs of 0.8 %-9.4 %). This method has been successfully applied to the simultaneous determination of 13 kinds of epoxy derivatives in different food samples including canned beverage, fish, meat, and milk powder. Satisfactory recoveries (74.9 %-118 %) were obtained. The results showed the potential application prospects in the enrichment and detection of hazardous substances in food.

Broad-Spectrum Antibody-Based Immunochromatographic Strip Assay for Rapid Screening of Bisphenol A Diglycidyl Ether and Its Derivatives in Canned Foods.

Bisphenol A diglycidyl ether (BADGE) is widely present in the inner coating of metal food cans, from which it can migrate into food and generate harmful derivatives during storage, such as bisphenol A (2,3-dihydroxypropyl) glycidyl ether, bisphenol A (3-chloro-2-hydroxypropyl) glycidyl ether, and bisphenol A (3-chloro-2-hydroxypropyl) (2,3-dihydroxypropyl) glycidyl ether. Here, a gold-nanoparticle-based immunochromatographic strip assay based on a broad-spectrum polyclonal antibody was developed for the simultaneous detection of BADGE and its derivatives, which could be accomplished within 15 min. The quantitative analysis of the visualization results was performed using Adobe Photoshop CC 2021, and the detection limit, defined as the concentration causing 15% inhibition, was 0.97 ng/mL. The recoveries of BADGE and its derivatives at various spiking levels in canned food samples ranged from 79.86% to 93.81%. The detection results of the proposed immunochromatographic strip assay were validated via high-performance liquid chromatography, showing a good correlation coefficient (R2 = 0.9580).

Composition and thermal processing evaluation of yeast ingredients as thiamin sources compared to a standard vitamin premix for canned cat food.

Significant improvement in thiamin retention of canned cat food has not been achieved by altering processing conditions. Some ingredients, such as yeasts, may supply thiamin able to withstand thermal processing. Therefore, the study objective was to evaluate yeast ingredients as thiamin sources for canned cat food. Six yeast ingredients were screened for thiamin content, and values ranged from 9.9-4,283.8 mg/kg dry matter basis (DMB). Treatments for thermal processing were arranged as a 2×4 factorial with 2 levels of vitamin premix (with or without) and 4 yeast ingredients (NY = none and LBV, BY, or EA from the ingredient screening). Replicates (n = 3) were processed in a horizontal still retort to an average lethality of 79.23 minutes. Thiamin degradation was analyzed as a mixed model with pre-retort thiamin content as a covariate and production day as a random effect. Main effects of vitamin premix and yeast and their interaction were significant at P-values less than 0.05. The Fisher's LSD post hoc comparison test was used to separate means. On average, experimental formulas retained 33.75% thiamin. The main effect of vitamin premix (average -42.9 mg/kg DMB) was not significant (P > 0.05). Thiamin degradation between NY (-31.3 mg/kg DMB) and BY (-33.8 mg/kg DMB) was similar (P > 0.05) whereas EA (-40.5 mg/kg DMB) and LBV (-55.6 mg/kg DMB) lost more (P < 0.05) thiamin than NY. The experimental formula of EA with vitamin premix (-70.3 mg/kg DMB) lost more (P < 0.05) thiamin than no yeast, BY, or EA without vitamin premix (average -17.4 mg/kg DMB) and all others (average -57.3 mg/kg DMB) were intermediate (P > 0.05). In summary, thiamin from yeast ingredients didn't exhibit better thermal stability than thiamin mononitrate. However, those ingredients with similar degradation levels or uniquely high thiamin levels may provide added value.

An efficient 3D adsorbent foam based on graphene oxide/AgO nanoparticles for rapid vortex-assisted floating solid phase extraction of bisphenol A in canned food products.

In this study, a three-dimensional adsorbent was developed based on graphene oxide/AgO nanoparticles over interconnected nickel foam (GO/AgO@Ni foam) for rapid and efficient vortex assisted floating solid phase extraction of bisphenol A in canned food products prior to high performance liquid chromatography with a fluorescence detector. The analytical techniques scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and Fourier transform infrared (FT-IR) were used for characterization of the synthetized GO/AgO@Ni foam. The effect of proficiency factors including pH, foam size, vortexing time, salt addition, sample volume, desorption type and volume, and desorption time on the extraction efficiency of bisphenol A were explored through the matrix match method. Under the above experimental conditions, the figures of merit of the method were acquired as LODs (S/N = 3) of 0.18-0.84 µg kg-1, LOQs of 0.61-2.81 µg kg-1 (S/N = 10), linear ranges of 0.5-500 µg kg-1, and enrichment factors of 235.5-244.9. The inter-day precision values (RSD%, n = 7) of 2.5-3.6 and the intra-day precision (%) of (5 days and seven replicates for each day) 2.8-3.8 were achieved for bisphenol A at a concentration of 50 µg kg-1. The relative recoveries of 94.0% to 99.6% were obtained for the canned food samples.

Associations between Preserved Foods and Breast Cancer Risk in Hong Kong Chinese Women.

Preserved food such as cured foods may contain nitrate and nitrite that may contribute to the breast cancer development. Evidence on the associations between these preserved food intakes and risk of breast cancer is sparse. This study aimed to examine the associations between preserved foods (i.e., cured meat, pickled vegetables, canned meat, and canned fruit/vegetables) and breast cancer risk in Hong Kong Chinese women. A total of 1,307 breast cancer cases and 1,050 age-matched controls were recruited from three hospitals during November 2011 through January 2018. We used a standardized questionnaire to collect information on dietary factors, including preserved foods. Unconditional multiple logistic regression was performed to calculate the adjusted odds ratio (AOR) of breast cancer in relation to preserved food with adjustment of potential confounders. We further performed stratified analysis according to the breast cancer biology subtypes. We found that cured meat consumption was significantly associated with the risk of breast cancer [AOR, 1.32; 95% confidence interval 95% (CI), 1.06-1.64]. Compared with no cured meat consumption, cured meat intake ≥ once per week was associated with an AOR of 2.66 (95% CI, 1.38-5.35). Women with canned fruit/vegetable ≥ consumption once per week had a higher risk of breast cancer (OR, 1.19; 95% CI, 1.00-1.41), particularly for the HER2-positive subtypes, but it became borderline after adjustment of confounders. Our study reveals a positive association between consumption of cured meat and breast cancer risk in Chinese population. Cured meat intake might be a potential novel risk factor for breast cancer but this would have to be confirmed by large prospective cohort studies. PREVENTION RELEVANCE: The main finding of this case-control study, an association between cured meat intake and a higher risk of breast cancer in Hong Kong Chinese women, contributes to the growing evidence for population-level health benefits of reducing cured meat consumption.

Preservative Effect on Canned Mackerel (Scomber colias) Lipids by Addition of Octopus (Octopus vulgaris) Cooking Liquor in the Packaging Medium.

The preservative properties of waste liquor obtained from octopus (Octopus vulgaris) cooking were investigated. Three different concentrations (high, medium, and low) of octopus cooking liquor (OCL) were included, respectively, in the aqueous packaging medium employed for mackerel (Scomber colias) canning. As a result, the canning process led to an increase (p < 0.05) of lipid content, lipid oxidation (development of fluorescent compounds and thiobarbituric acid reactive substances, TBARS), lipid hydrolysis (formation of free fatty acids, FFA) and ω3/ω6 ratio in fish muscle. In all canned samples, primary (peroxides) and secondary (TBARS) levels of lipid oxidation were low. Remarkably, the presence in the packaging medium of the high and medium OCL concentrations led to lower (p < 0.05) lipid oxidation development (fluorescent compound and TBARS detection, respectively). Furthermore, an increasing OCL presence led to an average decrease of peroxide and FFA content and to an average increase of the polyene index (PI). All OCL-packaged muscle showed lower average values of saturated fatty acids and ω3/ω6 ratio and higher average values of PI and monounsaturated fatty acid presence. This study provides a first approach to novel and beneficial use of the present marine waste to inhibit lipid damage of commercial canned fish.

In vitro digestion and microbial fermentation of dried food residues, a potential "new" component for pet food, and different non-digestible carbohydrate sources.

Food residues are often fed to dogs in private households and might also be a potential "new" ingredient for pet food in the future. As food residues might contain not only digestible, but also fermentable substrates, an effect on the intestinal microbiota can be assumed. In the present study, two batches of dried food residues (DFR) collected from hotels in Crete were microbially fermented in an in vitro batch culture system with canine fecal inoculum: non-sterile DFR including meat (DFRm), sterile DFR including meat (DFRms) and sterile DFR without meat (DFRwms). Different non-digestible carbohydrate sources (beet pulp, wheat bran, inulin, carrot pomace, brewer´s spent grains, cellulose and lignocellulose) were included for comparison. Inulin, cellulose and lignocellulose were only used as raw materials, while the other test substrates were incubated as raw and enzymatically pre-digested substrates. After incubation for 24 hours, the raw food residues markedly increased the concentrations of bacterial metabolites in the fermenters, although smaller effects were observed for the DFRwms. When the enzymatically pre-digested food residues were incubated, the effects were more pronounced for the DFRms and DFRwms. In general, when compared with the other test substrates, the food residues were microbially fermented to a comparable or partly higher extent. Interestingly, high n-butyrate concentrations were measured in the inocula, both after incubation of the raw and pre-digested food residues. In conclusion, the food residues contained enzymatically digestible and microbially fermentable substrates. If considered as a potential future ingredient for pet food, a standardization of the collection and processing of food residues might be necessary in order to reduce compositional variability and varying effects on the intestinal microbiota.

Effect of sterilization conditions on the formation of furan and its derivatives in canned foods with different substrates.

This study explored the effects of sterilization conditions on the formation of furan and its 10 derivatives in canned foods with a sterilizing value (F0) at 4. The contents of furans were determined by SPME arrow-GC-MS/MS, along with the furan precursors analyzed for elucidating the possible mechanism of furan formation. Results revealed that the total furan contents rose substantially in canned meat paste, tomato mackerel, chicken puree, tomato paste, pineapple slice, pineapple juice and carrot juice following sterilization. However, the total furan content did not change significantly ( p > 0.05) in canned oily mackerel, but decreased significantly ( p < 0.05) in canned apple puree after sterilization. With the exception of apple puree and pineapple slice, all the other canned foods showed a higher total furan content under low-temperature-long-time condition than that under high-temperature-short-time condition. Following heating, only the furan level showed a large increase in chicken puree, meat paste and tomato mackerel, whereas in canned fruit- and vegetable-based foods, the contents of furan and furfural showed a pronounced increase. The levels of alkylated furans were higher in sterilized samples containing high level of amino acid, while that of oxygenated furans were higher in sterilized samples containing high level of reducing sugar.

Fast sequential multi element analysis of lead and cadmium in canned food samples using effervescent tablet-assisted switchable solvent based liquid phase microextraction (EA-SS-LPME) coupled with high-resolution continuum source flame atomic absorption spectrometry (HR-CS-FAAS).

An effervescent tablet-assisted switchable solvent based liquid phase microextraction (EA-SS-LPME) was developed for multi-element determination of Pb and Cd in various samples using high-resolution continuum source flame atomic absorption spectrometry (HR-CS-FAAS). The effervescent tablets were used for improving the extraction efficiency. Triethylamine as a hydrophobic solvent was switched to protonated triethylamine carbonate by CO2 and used to extract dithizone complexes from samples. Calibration linearities were obtained from 0.06 to 10.0 mg L-1 (Pb) and 0.02 to 1.50 mg L-1 (Cd). LODs of the proposed method were 0.0195 (Pb) and 0.0068 (Cd). LOQs were 0.0649 mg L-1 (Pb) and 0.0228 mg L-1 (Cd) with %RSDs of 1.25%-1.69% (Pb) and 1.07%-1.64% (Cd). The proposed method was applied for the determination of Pb and Cd in water and canned food samples. The spiked recoveries were 82.3-119.0% (Pb) and 81.7-120.0% (Cd). In addition, the PF was 3.3, with EF at 1.4 (Pb) and 2.6 (Cd) obtained after extraction for under 8 min.