RESUMO
Sulfur in nature consists of two abundant stable isotopes, with two more neutrons in the heavy one (34S) than in the light one (32S). The two isotopes show similar physicochemical properties and are usually considered an integral system for chemical research in various fields. In this work, a model study based on a Li-S battery was performed to reveal the variation between the electrochemical properties of the two S isotopes. Provided with the same octatomic ring structure, the cyclo-34S8 molecules form stronger S-S bonds than cyclo-32S8 and are more prone to react with Li. The soluble Li polysulfides generated by the Li-34S conversion reaction show a stronger cation-solvent interaction yet a weaker cation-anion interaction than the 32S-based counterparts, which facilitates quick solvation of polysulfides yet hinders their migration from the cathode to the anode. Consequently, the Li-34S cell shows improved cathode reaction kinetics at the solid-liquid interface and inhibited shuttle of polysulfides through the electrolyte so that it demonstrates better cycling performance than the Li-32S cell. Based on the varied shuttle kinetics of the isotopic-S-based polysulfides, an electrochemical separation method for 34S/32S isotope is proposed, which enables a notably higher separation factor than the conventional separation methods via chemical exchange or distillation and brings opportunities to low-cost manufacture, utilization, and research of heavy chalcogen isotopes.
RESUMO
Rechargeable sodium-ion batteries (SIBs) have emerged as an advanced electrochemical energy storage technology with potential to alleviate the dependence on lithium resources. Similar to Li-ion batteries, the cathode materials play a decisive role in the cost and energy output of SIBs. Among various cathode materials, Na layered transition-metal (TM) oxides have become an appealing choice owing to their facile synthesis, high Na storage capacity/voltage that are suitable for use in high-energy SIBs, and high adaptivity to the large-scale manufacture of Li layered oxide analogues. However, going from the lab to the market, the practical use of Na layered oxide cathodes is limited by the ambiguous understanding of the fundamental structure-performance correlation of cathode materials and lack of customized material design strategies to meet the diverse demands in practical storage applications. In this review, we attempt to clarify the fundamental misunderstandings by elaborating the correlations between the electron configuration of the critical capacity-contributing elements (e.g., TM cations and oxygen anion) in oxides and their influence on the Na (de)intercalation (electro)chemistry and storage properties of the cathode. Subsequently, we discuss the issues that hinder the practical use of layered oxide cathodes, their origins and the corresponding strategies to address their issues and accelerate the target-oriented research and development of cathode materials. Finally, we discuss several new Na layered cathode materials that show prospects for next-generation SIBs, including layered oxides with anion redox and high entropy and highlight the use of layered oxides as cathodes for solid-state SIBs with higher energy and safety. In summary, we aim to offer insights into the rational design of high-performance Na layered oxide cathode materials towards the practical realization of sustainable electrochemical energy storage at a low cost.
RESUMO
Rational designs of solid polymer electrolytes with high ion conduction are critical in enabling the creation of advanced lithium batteries. However, known polymer electrolytes have much lower ionic conductivity than liquid/ceramics at room temperature, which limits their practical use in batteries. Here we show that precise positioning of designed repeating units in alternating polymer sequences lays the foundation for homogenized Li+ distribution, non-aggregated Li+-anion solvation and sequence-assisted site-to-site ion migration, facilitating the tuning of Li+ conductivity by up to three orders of magnitude. The assembled all-solid-state batteries facilitate reversible and dendrite-mitigated cycling against Li metal from ambient to elevated temperatures. This work demonstrates a powerful molecular engineering means to access highly ion-conductive solid-state materials for next-generation energy devices.
RESUMO
We have successfully synthesized a series of bidentate ligands by utilizing 2-(trimethylsilyl)phenyl trifluorosulfonate as a precursor for the benzyl group. This method proceeded by inserting a polythiourea into the CâS π-bond, intramolecular ring proton migration, and ring opening. Salient features of this strategy are mild reaction conditions, a novel product structure, excellent stereochemistry, and a good functional group tolerance. Furthermore, a series of density functional theory calculations were performed to gain insights into the transfer mechanism.
RESUMO
OBJECTIVE: This study aimed to examine the changes in absolute value and decline rate of early serum cardiac troponin T (cTnT) and N-terminal pro b-type natriuretic peptide (NT-proBNP) in neonates who received veno-arterial (V-A) extracorporeal membrane oxygenation (ECMO) support therapy within the first week of life. METHODS: We retrospectively collected clinical data and laboratory test results of 18 neonates who underwent V-A ECMO support within one week of birth, from July 2021 to June 2023, using the electronic medical record system. These patients were categorized into survival and death groups. Comparative analyses of the absolute values and decline rates of cTnT and NT-proBNP were made between the groups at baseline, and at 24, 48, and 72 h post-ECMO initiation. RESULTS: Out of the 18 neonates, 12 survived (survival rate: 66.7%), while 6 succumbed. The survival group exhibited significantly lower absolute values of cTnT and NT-proBNP than the death group, and their decline rates were significantly higher. Notably, all neonates without an early decline in cTnT and NT-proBNP levels were in the death group. CONCLUSION: The early changes in the absolute value and decline rate of serum cTnT and NT-proBNP in neonates undergoing V-A ECMO may serve as predictors of their prognosis.
Assuntos
Biomarcadores , Oxigenação por Membrana Extracorpórea , Peptídeo Natriurético Encefálico , Fragmentos de Peptídeos , Troponina T , Humanos , Oxigenação por Membrana Extracorpórea/efeitos adversos , Oxigenação por Membrana Extracorpórea/mortalidade , Peptídeo Natriurético Encefálico/sangue , Troponina T/sangue , Recém-Nascido , Fragmentos de Peptídeos/sangue , Estudos Retrospectivos , Masculino , Feminino , Biomarcadores/sangue , Fatores de Tempo , Resultado do Tratamento , Valor Preditivo dos Testes , Fatores de RiscoRESUMO
OBJECTIVE: A retrospective study was conducted to explore the efficacy of bioabsorbable poly-L-lactic acid sternal pins in sternal closure in infants after cardiac surgery. METHODS: A total of 170 infantile patients who underwent cardiac surgery were divided into the steel wire group (group A), the PDS cord group (group B), and the steel wire + sternal pin group (group C). The occurrence of the thoracic deformity was evaluated by vertebral index (VI), frontosagittal index (FSI), and Haller index (HI) values; the stability of the sternum was evaluated by detecting sternal dehiscence and displacement. RESULTS: By comparing the absolute values of the differences in VI, FSI, and HI in the three groups, it was found that the difference values of VI and HI in group C were significantly lower than those in group B (p = 0.028 and 0.005). For the highest deformation index, the deformation rate of infants in group C before discharge and during the 1-year follow-up was lower than that in group A and group B (p = 0.009 and 0.002, respectively). The incidence of sternal displacement in group C was also significantly lower than that in groups A and B (p = 0.009 and 0.009). During the 1-year follow-up, there was no sternal dehiscence, and the sternum healed completely in the three groups. CONCLUSION: The use of "steel wire + sternal pin" for sternal closure in infants after cardiac surgery can reduce the occurrence of sternal deformity, reduce anterior and posterior displacement of the sternum, and improve sternal stability.
Assuntos
Procedimentos Cirúrgicos Cardíacos , Esterno , Lactente , Humanos , Estudos Retrospectivos , Resultado do Tratamento , Esterno/diagnóstico por imagem , Esterno/cirurgia , Procedimentos Cirúrgicos Cardíacos/efeitos adversos , Esternotomia/efeitos adversos , Fios Ortopédicos , Deiscência da Ferida Operatória/etiologia , Deiscência da Ferida Operatória/prevenção & controle , AçoRESUMO
A noise attenuation performance test was conducted on earmuffs using a recoilless weapon launch platform in a confined space, along with two acoustic test fixtures (ATFs). The overpressure at the ATF's effective tympanic membrane comprised direct sound at 185 dB sound pressure level (SPL) and reflected sound at 179 dB SPL. Wearing earmuffs reduced these peaks to 162 dB SPL and 169 dB SPL, respectively. The reflected sound from walls was defined as delayed sound. An analytical model for earmuff noise attenuation simulated their effectiveness. The simulation revealed that when the earmuffs attenuated delayed sound, the acoustic impedance of acoustic leakage and the acoustic impedance of the earmuff material decreased by 96% and 50%, respectively. The negative overpressure zone between direct and delayed sound decreased the earmuffs' fit against the ATF. Additionally, the enclosed volume between the earmuff and the ear canal decreased by 12%. After the installation of bandages on the earmuffs, the overpressure peak of delayed sound was reduced by 5 dB. Furthermore, the acoustic impedance of the earmuff's sound leakage path and the acoustic impedance of the earmuff material deformation path increased by 100% and 809%, respectively.
Assuntos
Acústica , Dispositivos de Proteção das Orelhas , Pressão , Humanos , Desenho de Equipamento , Ruído , Som , Armas de Fogo , Adulto , Masculino , Fatores de Tempo , Modelos TeóricosRESUMO
Two new aporphine alkaloids, 6aR-2'-(3-oxobutenyl)-thaliadin (1) and N-methylthalisopynine (2), along with ten known analogs (3-12), were isolated from the roots of Thalictrum omeiense W. T. Wang et S. H. Wang. Their structures were determined by extensive spectroscopic and X-ray crystallographic analyses. Compounds 1-7 and 9-12 were tested for their antiproliferative effects in vitro against two human cancer cell lines (A549 and MCF-7). Among them, compounds 1, 3, and 7 exhibited moderate inhibitory activity against the tested cell lines with IC50 values ranging from 23.73 to 34.97 µM.
RESUMO
Controlled radical copolymerizations present attractive avenues to obtain polymers with complicated compositions and sequences. In this work, we report the development of a visible-light-driven organocatalyzed controlled copolymerization of fluoroalkenes and acyclic N-vinylamides for the first time. The approach enables the on-demand synthesis of a broad scope of amide-functionalized main-chain fluoropolymers via novel fluorinated thiocarbamates, facilitating regulations over chemical compositions and alternating fractions by rationally selecting comonomer pairs and ratios. This method allows temporally controlled chain-growth by external light, and maintains high chain-end fidelity that promotes facile preparation of block sequences. Notably, the obtained F/N hybrid polymers, upon hydrolysis, afford free amino-substituted fluoropolymers versatile for post modifications toward various functionalities (e.g., amide, sulfonamide, carbamide, thiocarbamide). We further demonstrate the in situ formation of polymer networks with desirable properties as protective layers on lithium metal anodes, presenting a promising avenue for advancing lithium metal batteries.
RESUMO
The poor electrochemical stability window and low ionic conductivity in solid-state electrolytes hinder the development of safe, high-voltage, and energy-dense lithium metal batteries. Herein, taking advantage of the unique electronic effect of nitrile groups, we designed a novel azanide-based single-ion covalent organic framework (CN-iCOF) structure that possesses effective Li+ transport and high-voltage stability in lithium metal batteries. Density functional theory (DFT) calculations and molecular dynamics (MD) revealed that electron-withdrawing nitrile groups not only resulted in an ultralow HOMO energy orbital but also enhanced Li+ dissociation through charge delocalization, leading to a high tLi+ of 0.93 and remarkable oxidative stability up to 5.6 V (vs. Li+/Li) simultaneously. Moreover, cyanation leveraging Strecker reaction transformed reversible imine-linkage to a stable sp3-carbon-containing azanide anion, which facilitated contorted alignment of transport "ladders" along the one-dimensional anionic channels and the ionic conductivity could reach 1.33 × 10-5 S cm-1 at ambient temperature without any additives. As a result, CN-iCOF allowed operation of solid-state lithium metal batteries with high-voltage cathodes such as LiNi0.8Mn0.1Co0.1O2 (NCM811), demonstrating stable lithium deposition up to 1,100 h and reversible battery cycling at ambient temperature up to 4.5 V, shedding light on the importance of discovering new functionality for forthcoming high-performance batteries.
RESUMO
Controlling the structure and chemistry of solid electrolyte interphase (SEI) underpins the stability of electrolyte-electrode interface, and is crucial for advancing rechargeable lithium metal batteries (LMBs). Here, we utilized photo-controlled copolymerization to achieve the on-demand synthesis of fluorosulfonyl fluoropolymers as unprecedented artificial SEI layers on Li metal anodes. This work not only enables instant formation of a hybrid polymer-inorganic interphase that consists of a polymer-enriched top layer and a LiF-fortified bottom layer, originating from a single polymeric component, but also imparts various desirable physical properties (e.g., good mechanical strength and flexibility, high ion conductivity, low overpotential) to SEI via a single-to-divergent strategy. Model reactions and structural characterizations supported the formation of a divergent fluorinated interphase, which furnished prolonged stabilization of Li deposition, high coulombic efficiency and improved cycling behavior in electrochemical experiments. This work highlights the great potential of exploring reactive polymers as versatile coatings to stabilize Li metal anodes, providing a promising avenue to solve electrode-electrolyte interfacial problems for LMBs.
RESUMO
Solid-state lithium-sulfur batteries have shown prospects as safe, high-energy electrochemical storage technology for powering regional electrified transportation. Owing to limited ion mobility in crystalline polymer electrolytes, the battery is incapable of operating at subzero temperature. Addition of liquid plasticizer into the polymer electrolyte improves the Li-ion conductivity yet sacrifices the mechanical strength and interfacial stability with both electrodes. In this work, we showed that by introducing a spherical hyperbranched solid polymer plasticizer into a Li+ -conductive linear polymer matrix, an integrated dynamic cross-linked polymer network was built to maintain fully amorphous in a wide temperature range down to subzero. A quasi-solid polymer electrolyte with a solid mass content >90 % was prepared from the cross-linked polymer network, and demonstrated fast Li+ conduction at a low temperature, high mechanical strength, and stable interfacial chemistry. As a result, solid-state lithium-sulfur batteries employing the new electrolyte delivered high reversible capacity and long cycle life at 25 °C, 0 °C and -10 °C to serve energy storage at complex environmental conditions.
RESUMO
Inflammation and ferroptosis crosstalk complexly with immune microenvironment of hepatocellular carcinoma (HCC), thus affecting the efficacy of immunotherapy. Herein, our aim was to identify the inflammation-associated ferroptosis (IAF) biomarkers for contributing HCC. A total of 224 intersecting DEGs identified from different inflammation- and ferroptosis-subtypes were set as IAF genes. Seven of them including ADH4, APOA5, CFHR3, CXCL8, FTCD, G6PD and PON1 were used for construction of a risk model which classified HCC patients into two groups (high and low risk). HCC patients in the high-risk group exhibited shorter survival rate and higher immune score, and were predicted to have higher respond rate in immune checkpoint inhibition (ICI) therapy. Levels of the seven genes were significantly changed in HCC tissues in comparison to adjacent tissues. After inserting the gene expression into the risk model, we found that the risk model exhibited the higher diagnostic value for distinguish HCC tissues compared each single gene. Furthermore, HCC tissues from our research group with high-risk score exhibited more cases of microsatellite instability (MSI), heavier tumour mutational burden (TMB), higher expression level of PDL1 and cells with CD8. Knockdown of APOA5 reduced HCC cell proliferation combining with elevating inflammation and ferroptosis levels. In conclusion, we considered APOA5 maybe a novel target for suppressing HCC via simultaneously elevating inflammation and ferroptosis levels, and signature constructed by seven IAF genes including ADH4, APOA5, CFHR3, CXCL8, FTCD, G6PD and PON1 can act as a biomarker for optimising the diagnosis, prognosis evaluation and immunotherapy options in HCC patients.
Assuntos
Carcinoma Hepatocelular , Ferroptose , Neoplasias Hepáticas , Humanos , Carcinoma Hepatocelular/diagnóstico , Carcinoma Hepatocelular/genética , Carcinoma Hepatocelular/terapia , Ferroptose/genética , Neoplasias Hepáticas/diagnóstico , Neoplasias Hepáticas/genética , Neoplasias Hepáticas/terapia , Imunoterapia , Inflamação/genética , Microambiente Tumoral/genética , ArildialquilfosfataseRESUMO
Anode-free rechargeable sodium batteries represent one of the ultimate choices for the 'beyond-lithium' electrochemical storage technology with high energy. Operated based on the sole use of active Na ions from the cathode, the anode-free battery is usually reported with quite a limited cycle life due to unstable electrolyte chemistry that hinders efficient Na plating/stripping at the anode and high-voltage operation of the layered oxide cathode. A rational design of the electrolyte toward improving its compatibility with the electrodes is key to realize the battery. Here, we show that by refining the volume ratio of two conventional linear ether solvents, a binary electrolyte forms a cation solvation structure that facilitates flat, dendrite-free, planar growth of Na metal on the anode current collector and that is adaptive to high-voltage Na (de)intercalation of P2-/O3-type layered oxide cathodes and oxidative decomposition of the Na2C2O4 supplement. Inorganic fluorides, such as NaF, show a major influence on the electroplating pattern of Na metal and effective passivation of plated metal at the anode-electrolyte interface. Anode-free batteries based on the refined electrolyte have demonstrated high coulombic efficiency, long cycle life, and the ability to claim a cell-level specific energy of >300 Wh/kg.
RESUMO
Atrial fibrillation (AF) is a main risk factor for cerebrovascular diseases but lacks precision therapy. Adipose triglyceride lipase (ATGL) is a key enzyme involved in the intracellular degradation of triacylglycerol and plays an important role in lipid and energy metabolism. However, the role of ATGL in the regulation of AF remains unclear. In this study, AF was induced by infusion of angiotensin II (Ang II, 2000 ng/kg/min) for 3 weeks in male ATGL knockout (KO) mice and age-matched C57BL/6 wild-type mice. The atrial volume was measured by echocardiography. Atrial fibrosis, inflammatory cells, and superoxide production were detected by histologic examinations. The results showed that ATGL expression was significantly downregulated in the atrial tissue of the Ang II-infused mice. Moreover, Ang II-induced increase in the inducibility and duration of AF, atrial dilation, fibrosis, inflammation, and oxidative stress in wild-type mice were markedly accelerated in ATGL KO mice; however, these effects were dramatically reversed in the ATGL KO mice administered with peroxisome proliferator-activated receptor (PPAR)-α agonist clofibric acid. Mechanistically, Ang II downregulated ATGL expression and inhibited PPAR-α activity, activated multiple signaling pathways (inhibiting kappa B kinase α/ß-nuclear factor-κB, nicotinamide adenine dinucleotide phosphate oxidase, and transforming growth factor-ß1/SMAD2/3) and reducing Kv1.5, Cx40, and Cx43 expression, thereby contributing to atrial structural and electrical remodeling and subsequent AF. In summary, our results indicate that ATGL KO enhances AF inducibility, possibly through inhibiting PPAR-α activation and suggest that activating ATGL might be a new therapeutic option for treating hypertensive AF.
Assuntos
Aciltransferases , Fibrilação Atrial , Lipase , Animais , Masculino , Camundongos , Angiotensina II/metabolismo , Fibrilação Atrial/genética , Fibrilação Atrial/metabolismo , Fibrose , Lipase/genética , Lipase/metabolismo , Camundongos Endogâmicos C57BL , Camundongos Knockout , PPAR alfa/genética , PPAR alfa/agonistas , PPAR alfa/metabolismo , Aciltransferases/genética , Aciltransferases/metabolismoRESUMO
The application of multiple quantum dots (QDs) in the field of white light emitting diodes (WLEDs) is still an important challenge due to their low luminous efficiency and quenching phenomenon. In this paper, we prepared AgInS2 QDs/zeolitic imidazolate framework-70 (AIS/ZIF-70) composite by a microwave hydrothermal method. Owing to the high porosity and stability of ZIF-70, it could effectively prevent quenching issues due to the aggregation of QDs. Since the ZIF-70 and QDs were chemically bonded, the formation of the ZnS layer could effectively passivate the surface defect and thus the quantum yield reached 21.49 % in aqueous solution. The luminous efficiency (LE) of the assembled AIS/ZIF-based WLED was reinforced by 6.8â times with a molar ratio of AgIn/Zn=18, i. e. at 5.26 % molar fraction of ZIF-70. Moreover, the color rendering index (CRI) and correlated color temperature (CCT) of AIS/ZIF-based WLED were 84.3 and 3631â K, respectively, indicating its potential application in solid-state lighting.
RESUMO
Near-field lithography has evident advantages in fabricating super-resolution nano-patterns. However, the working distance (WD) is limited due to the exponential decay characteristic of the evanescent waves. Here, we proposed a novel photolithography method based on a modified photonic crystal (PC), where a defect layer is embedded into the all-dielectric multilayer structure. It is shown that this design can amend the photonic band gap and enhance the desired high-kwaves dramatically, then the WD in air conditions could be extended greatly, which would drastically relax the engineering challenges for introducing the near-field lithography into real-world manufacturing applications. Typically, deep subwavelength patterns with a half-pitch of 32 nm (i.e.,λ/6) could be formed in photoresist layer at an air WD of 100 nm. Moreover, it is revealed that diversified two-dimensional patterns could be produced with a single exposure using linear polarized light. The analyses indicate that this improved dielectric PC is applicable for near-field lithography to produce super-resolution periodic patterns with large WD, strong field intensity, and great uniformity.
RESUMO
Due to the extremely high bond energy of N≡N (â¼941 kJ/mol), the traditional Haber-Bosch process of ammonia synthesis is known as an energy-intensive and high CO2-emission industry. In this paper, a cascade N2 reduction process with dielectric barrier discharge (DBD) plasma oxidation and electrocatalytic reduction as an alternative route is first proposed. N2 is oxidized to be reactive nitrogen species (RNS) by nonthermal plasma, which would then be absorbed by KOH solution and electroreduced to NH4+. It is found that the production of NOx is a function of discharge length, discharge power, and gas flow rate. Afterward, the cobalt catalyst is used in the process of electrocatalytic reduction of ammonia, which shows high selectivity (Faradic efficiency (FE) above 90%) and high yield of ammonia (45.45 mg/h). Finally, the cascade plasma oxidation and electrocatalytic reduction for ammonia synthesis is performed. Also, the performance of the reaction system is evaluated. It is worth mentioning that a stable and sustainable ammonia production efficiency of 16.21 mg/h is achieved, and 22.16% of NOx obtained by air activation is converted into NH4+. This work provides a demonstration for further industrial application of ammonia production with DBD plasma oxidation and electrocatalytic reduction techniques.
Assuntos
Amônia , Plasma , Oxirredução , Ar , Óxido NítricoRESUMO
A series of lathyrane-type Euphorbia diterpene derivatives featured 3R configuration (H-3ß) were synthesized from natural rich Euphorbia factor L3via modified Mitsunobu reaction based on configuration inversion strategy. The antiproliferation activity and MDR reversal ability of the lathyrane derivatives were evaluated, and the most synthesized compounds showed moderate or strong potencies. Among them, diterpenes 21 (IC50 values of 2.6, 5.2 and 13.1 µM, respectively) and 25 (IC50 values of 5.5, 8.6 and 1.3 µM, respectively) presented the strong cytotoxicity against MCF-7, 4 T1 and HepG2 cells. Meanwhile, derivative 25 exhibited excellent MDR reversal ability with the reversal fold of 16.1 higher than that of verapamil. The cellular thermal shift assay and molecular docking proved direct engagement of diterpene 25 to ABCB1, suggesting 25 could be a promising MDR modulator. Furthermore, the preliminary SARs of these diterpenes were also discussed.
Assuntos
Antineoplásicos , Diterpenos , Euphorbia , Humanos , Linhagem Celular Tumoral , Diterpenos/síntese química , Diterpenos/farmacologia , Euphorbia/química , Células Hep G2 , Simulação de Acoplamento Molecular , Estrutura Molecular , Antineoplásicos/síntese química , Antineoplásicos/química , Antineoplásicos/farmacologiaRESUMO
The direct modification of structurally complex natural product dehydroepiandrosterone (DHEA) through iron-catalyzed direct hydroamination of DHEA with various nitro(hetero)arenes was carried out to afford 5α-arylamino-DHEAs (1-25) in good yields (53-72%). Though as a radical reaction, it features high stereoselectivity, and only the 5α-substituted derivatives were produced. The in vitro antiproliferative activity of these synthesized compounds against the human breast cancer MCF-7 cell was evaluated, showing that most of DHEA analogues possessed the moderate cytotoxic activity. The preliminary structure-activity relationship analysis revealed that the electron-withdrawing groups installed at the para-position of arylamine ring had a great contribution to the improvement of the DHEA's cytotoxic potency. Among them, (4-trifluoromethylaniline)-DHEA (4) displayed the most potent cytotoxicity, with an IC50 value of 19.3 µM, which was 2.3-fold more active than DHEA.