RESUMEN
This study aims to address accuracy challenges in assessing air pollution health impacts using Environmental Benefits Mapping and Analysis Program (BenMap), caused by limited meteorological factor data and missing pollutant data. By employing data increment strategies and multiple machine learning models, this research explores the effects of data volume, time steps, and meteorological factors on model prediction performance using several years of data from Tianjin City as an example. The findings indicate that increasing training data volume enhances the performance of Random Forest Regressor (RF) and Decision Tree Regressor (DT) models, especially for predicting CO, NO2, and PM2.5. The optimal prediction time step varies by pollutant, with the DT model achieving the highest R2 value (0.99) for CO and O3. Combining multiple meteorological factors, such as atmospheric pressure, relative humidity, and dew point temperature, significantly improves model accuracy. When using three meteorological factors, the model achieves an R2 of 0.99 for predicting CO, NO2, PM10, PM2.5, and SO2. Health impact assessments using BenMap demonstrated that the predicted all-cause mortality and specific disease mortalities were highly consistent with actual values, confirming the model's accuracy in assessing health impacts from air pollution. For instance, the predicted and actual all-cause mortality for PM2.5 were both 3120; for cardiovascular disease, both were 1560; and for respiratory disease, both were 780. To validate its generalizability, this method was applied to Chengdu, China, using several years of data for training and prediction of PM2.5, CO, NO2, O3, PM10, and SO2, incorporating atmospheric pressure, relative humidity, and dew point temperature. The model maintained excellent performance, confirming its broad applicability. Overall, we conclude that the machine learning and BenMap-based methods show high accuracy and reliability in predicting air pollutant concentrations and health impacts, providing a valuable reference for air pollution assessment.
RESUMEN
High aerosol loadings are observed not only in megacities on continents but also in oceanic regions like the Bohai Sea. This work provides a comprehensive analysis of the spatial and temporal variations in Aerosol Optical Depth (AOD) across different ocean regions worldwide over the past four decades, using remote sensing reanalysis data. The mean AOD value across all oceanic grids is approximately 0.112, with higher levels recorded in the Central Atlantic (~0.206), followed by the North Indian Ocean (~0.201), and the Western North Pacific (~0.197). A latitudinal analysis reveals that high AOD values are predominantly found in the Northern Hemisphere's oceanic regions, especially between latitudes 0° and 70° N. Except for the Gulf of California and Hudson Bay, AOD values in the other fourteen surveyed inland seas surpass the mean levels found at similar latitudes in oceanic regions. Among which, the Bohai Sea stands out as the most polluted oceanic region with AOD value of 0.35. Over the last four decades, AOD trends have revealed a significant decrease across about 89.5 % of global oceanic grids, while an increase in AOD is observed in low-latitude oceanic areas (30° S-30° N). Investigation into inland seas shows that nearly two-thirds have experienced a declining AOD trend, while sharply upward trends in AOD are primarily found in Asia. The Bohai Sea shows the largest increase in AOD, with an annual growth rate of 1.4 %. The turning-points of the AOD in each inland sea confirm the success of regional emission control policies initiated on the adjacent continents. To improve air quality in inland seas like the Bohai Sea, adjusting industrial layouts, such as relocating heavy industries from the surrounding coastal cities' proximities to areas near open seas, could significantly benefit public health.
RESUMEN
This study aims to identify unique signatures from residential coal combustion in China across various combustion conditions and coal types. Using a Thermal/Spectral Carbon Analyzer with a Photoionization Time-of-Flight Mass Spectrometer (TSCA-PI-TOF-MS), we focus on the optical properties and organic mass spectra of the emissions. Bituminous coal emerged as the primary emitter of total carbon, releasing 729 µg C/mg PM2.5 under smoldering and 894 µg C/mg PM2.5 under flaming. Carbon fractions mainly comprised OC1 and OC2, except for anthracite's dominance of EC1 under smoldering. Pyrolysis carbon absorption shifted from 405, 445 and 532 nm during smoldering to near-infrared bands (635-980 nm) during flaming for both bituminous and anthracite coal. Conversely, clean coal exhibited an inverse trend, attributed to additives enhancing oxygen-containing organic compounds and long-chain hydrocarbons released in charring process. Sample of bituminous coal began charring at OC3 step, while anthracite began earlier at OC2 step, particularly pronounced under flaming. Clean coal displayed unconventional charring at OC1 step under smoldering condition, producing signature compounds like butenal, methylfuran, furanylalcohol, and naphthol. The mass spectra of bituminous coal featured characteristic peaks, including m/z 192 (methylphenanthrene), 206, 220 (alkylated phenanthrenes), and 234 (retene). Anthracite coal showed a potential tracer at m/z 223, shifting from OC1 in smoldering to OC2 in flaming. Clean coal under flaming condition exhibited elevated levels of aromatic compounds, indicating potential toxicity, with peaks at m/z 178 (phenanthrene), 228 (chrysene/benz[a]anthracene), 234 (retene), 242 (methylchrysene), and 252 (benzo[a]pyrene, benzo[k]fluoranthene). Results also showed that the broader mass spectra range in the OC3 and OC4 steps across all coal types suggests that high-temperature pyrolysis promotes diversity. These findings contribute to refined source apportionment of carbon emissions from residential coal combustion and provide the scientific basis for the formulation of air pollution prevention strategies, crucial for coal-dependent regions.
RESUMEN
Heavy metals (HMs) in PM2.5 gain much attention for their toxicity and carcinogenic risk. This study evaluates the health risks of PM2.5-bound HMs, focusing on how meteorological conditions affect these risks against the backdrop of PM2.5 reduction trends in China. By applying a receptor model with a meteorological normalization technique, followed by health risk assessment, this work reveals emission-driven changes in health risk of source-specific HMs in the outskirt of Tianjin during the implementation of China' second Clean Air Action (2018-2020). Sources of PM2.5-bound HMs were identified, with significant contributions from vehicular emissions (on average, 33.4 %), coal combustion (26.3 %), biomass burning (14.1 %), dust (11.7 %), industrial boilers (9.7 %), and shipping emission and sea salt (4.7 %). The source-specific emission-driven health risk can be enlarged or dwarfed by the changing meteorological conditions over time, demonstrating that the actual risks from these source emissions for a given time period may be higher or smaller than those estimated by traditional assessments. Meteorology contributed on average 56.1 % to the interannual changes in source-specific carcinogenic risk of HMs from 2018 to 2019, and 5.6 % from 2019 to 2020. For the source-specific noncarcinogenic risk changes, the contributions were 38.3 % and 46.4 % for the respective periods. Meteorology exerts a more profound impact on daily risk (short-term trends) than on annual risk (long-term trends). Such meteorological impacts differ among emission sources in both sign and magnitude. Reduced health risks of HMs were largely from targeted regulatory measures on sources. Therefore, the meteorological covariates should be considered to better evaluate the health benefits attributable to pollution control measures in health risk assessment frameworks.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Monitoreo del Ambiente , Metales Pesados , Material Particulado , Material Particulado/análisis , Contaminantes Atmosféricos/análisis , Medición de Riesgo , Metales Pesados/análisis , China , Contaminación del Aire/estadística & datos numéricos , Humanos , Exposición a Riesgos Ambientales/estadística & datos numéricos , Emisiones de Vehículos/análisisRESUMEN
The contents of eight carbonaceous subfractions were determined by simultaneously collecting PM2.5 samples from four sites in different functional areas of Tianjin in 2021. The results showed that the organic carbon (OC) concentration was 3.7 µg·m-3 to 4.4 µg·m-3, and the elemental carbon (EC) concentration was 1.6 µg·m-3 to 1.7 µg·m-3, with the highest OC concentration in the central urban area. There was no significant difference in EC concentration. The concentration of PM2.5 showed the distribution characteristics of the surrounding city>central city>peripheral area. The OC/EC minimum ratio method was used to estimate the concentrations of secondary organic carbon (SOC) in PM2.5, and the results showed that the secondary pollution was more prominent in the surrounding city, with SOC accounting for 48.8%. The correlation between carbon subcomponents in each functional area showed the characteristics of the peripheral area>central area>surrounding area, all showing the strongest correlation between EC1 and OC2 and EC1 and OC4. By including the carbon component concentration into the positive definite matrix factorization (PMF) model for source apportionment, the results showed that road dust sources(9.7%-23.5%), coal-combustion sources (10.2%-13.3%), diesel vehicle exhaust (12.6%-20.2%)and gasoline vehicle exhaust (18.9%-38.8%)were the main sources of carbon components in PM2.5 in Tianjin. The pollution sources of carbon components were different in different functional areas, with the central city and peripheral areas mainly affected by gasoline vehicle exhaust; the surrounding city was more prominently affected by the secondary pollution and diesel vehicle exhaust.
RESUMEN
Ambient particulate matter (PM2.5 and PM10), has been extensively monitored in numerous urban areas across the globe. Over the past decade, there has been a significant improvement in PM2.5 air quality, while improvements in PM10 levels have been comparatively modest, primarily due to the limited reduction in coarse particle (PM2.5-10) pollution. Unlike PM2.5, PM2.5-10 predominantly originates from local emissions and is often characterized by pronounced spatial heterogeneity. In this study, we utilized over one million data points on PM concentrations, collected from >100 monitoring sites within a Chinese megacity, to perform spatial source apportionment of PM2.5-10. Despite the widespread availability of such data, it has rarely been employed for this purpose. We employed an enhanced positive matrix factorization approach, capable of handling large datasets, in conjunction with a Bayesian multivariate receptor model to deduce spatial source impacts. Four primary sources were successfully identified and interpreted, including residential burning, industrial processes, road dust, and meteorology-related sources. This interpretation was supported by a considerable body of prior knowledge concerning emission sources, which is usually unavailable in most cases. The methodology proposed in this study demonstrates significant potential for generalization to other regions, thereby contributing to the development of air quality management strategies.
RESUMEN
Air pollution over the oceans has received less attention compared to densely populated urban areas of continents. The Bohai Sea, a semi-enclosed sea in northern China, is surrounded by thirteen industrial cities that have experienced significant improvements in air quality over the past decade. However, the changes in air pollution over the Bohai Sea and its impacts on surrounding cities remain poorly understood. To address this, this study investigated the evolution of air pollution and its chemical composition in the Bohai Sea over four decades, utilizing satellite remote sensing data, reanalysis datasets, emissions inventories, and statistical modeling. Historically, the region has suffered from severe air pollution, resulting from a combination of continental emissions and marine inputs (e.g., sea salt, ports and maritime vessel activities). The aerosol optical depth (AOD) over the sea was higher than the mean levels observed in its surrounding coastal cities. Statistically, 45% of the air masses reaching the Bohai Sea are associated with natural sources (dust- and marine-rich), while the remainder carry anthropogenic pollutants from continental regions. With the exception of Cangzhou city, these coastal cities suffer from air pollutants originating from the Bohai Sea. Cities in the northern region of the sea, spanning from Tianjin to Yingkou, are particularly impacted. The majority of the surrounding cities are affected by a large proportion of anthropogenic aerosol types transported through air masses from the Bohai Sea, including those from biomass burning and industrial activities. These findings emphasize the considerable influence of human-induced sources in the Bohai Sea on neighboring urban areas. Furthermore, being a maritime region, natural sources like sea salt and dust from the sea may also exert a discernible impact on the neighboring environment.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Humanos , Ciudades , Contaminantes Atmosféricos/análisis , Polvo/análisis , Contaminación del Aire/análisis , China , Aerosoles/análisis , Monitoreo del Ambiente/métodosRESUMEN
Conventional source apportionments of ambient volatile organic compounds (VOCs) have been based on observed and initial concentrations after photochemical correction. However, these results have not been related to ozone (O3) and secondary organic aerosol (SOA) formation. Thus, the apportioned contributions could not effectively support secondary pollution control development. Source apportionment of the VOCs consumed in forming O3 and SOA is needed. A consumed VOC source apportionment approach was developed and applied to hourly speciated VOCs data from June to August 2022 measured in Laoshan, Qingdao. Biogenic emissions (56.3%), vehicle emissions (17.2%), and gasoline evaporation (9.37%) were the main sources of consumed VOCs. High consumed VOCs from biogenic emissions mainly occurred during transport from parks to the southwest and northwest of study site. During the O3 pollution period, biogenic emissions (46.3%), vehicle emissions (24.2%), and gasoline evaporation (14.3%) provided the largest contributions to the consumed VOCs. However, biogenic emissions contribution increased to 57.1% during the non-O3 pollution period, and vehicle emissions and gasoline evaporation decreased to 16.5% and 9.01%, respectively. Biogenic emissions and the mixed source of combustion sources and solvent use contributed the most to O3 and SOA formation potentials during the O3 pollution period, respectively.
RESUMEN
Ambient volatile organic compounds (VOCs) concentrations are affected by emissions, dispersion, and chemistry. This work developed an initial concentration-dispersion normalized PMF (ICDN-PMF) to reflect the changes in source emissions. The effects of photochemical losses for VOC species were corrected by estimating the initial data, and then applying dispersion normalization to reduce the impacts of atmospheric dispersion. Hourly speciated VOC data measured in Qingdao from March to May 2020 were utilized to test the method and had assessed its effectiveness. Underestimated solvent use and biogenic emissions contributions due to photochemical losses during the O3 pollution (OP) period reached 4.4 and 3.8 times the non-O3 pollution (NOP) period values, respectively. Increased solvent use contribution due to air dispersion during the OP period was 4.6 times the change in the NOP period. The influence of chemical conversion and air dispersion on the gasoline and diesel vehicle emissions was not apparent during either period. The ICDN-PMF results suggested that biogenic emissions (23.1 %), solvent use (23.0 %), motor-vehicle emissions (17.1 %), and natural gas and diesel evaporation (15.8 %) contributed most to ambient VOCs during the OP period. Biogenic emissions and solvent use contributions during the OP period increased by 187 % and 135 % compared with the NOP period, respectively, whereas that of liquefied petroleum gas substantially decreased during the OP period. Controlling solvent use and motor-vehicles could be effective in controlling VOCs in the OP period.
RESUMEN
Based on the hourly O3 concentration data of 337 prefectural-level divisions and simultaneous surface meteorological data in China, we applied empirical orthogonal function (EOF) analysis to analyze the main spatial patterns, variation trends, and main meteorological driving factors of O3 concentration in China from March to August in 2019-2021. In this study, a KZ (Kolmogorov-Zurbenko) filter was used to decompose the time series of O3 concentration and simultaneous meteorological factors into corresponding short-term, seasonal, and long-term components in 31 provincial capitals.Then, the stepwise regression was used to establish the relationship between O3 and meteorological factors. Ultimately, the long-term component of O3 concentration after "meteorological adjustment" was reconstructed. The results indicated that the first spatial patterns of O3 concentration showed a convergent change, that is, the volatility of O3 concentration was weakened in the high-value region of variability and enhanced in the low-value region.Before and after the meteorological adjustment, the variation trend of O3 concentration in different cities was different to some extent. The adjusted curve was "flatter" in most cities. Among them, Fuzhou, Haikou, Changsha, Taiyuan, Harbin, and Urumqi were greatly affected by emissions. Shijiazhuang, Jinan, and Guangzhou were greatly affected by meteorological conditions. Beijing, Tianjin, Changchun, and Kunming were greatly affected by emissions and meteorological conditions.
RESUMEN
A long-term (2013-2019) PM2.5 speciation dataset measured in Tianjin, the largest industrial city in northern China, was analyzed with dispersion normalized positive matrix factorization (DN-PMF). The trends of source apportioned PM2.5 were used to assess the effectiveness of source-specific control policies and measures in support of the two China's Clean Air Actions implemented nationwide in 2013-2017 and 2018-2020, respectively. Eight sources were resolved from the DN-PMF analysis: coal combustion (CC), biomass burning (BB), vehicular emissions, dust, steelmaking and galvanizing emissions, a mixed sulfate-rich factor and secondary nitrate. After adjustment for meteorological fluctuations, a substantial improvement in PM2.5 air quality was observed in Tianjin with decreases in PM2.5 at an annual rate of 6.6%/y. PM2.5 from CC decreased by 4.1%/y. The reductions in SO2 concentration, PM2.5 contributed by CC, and sulfate demonstrated the improved control of CC-related emissions and fuel quality. Policies aimed at eliminating winter-heating pollution have had substantial success as shown by reduced heating-related SO2, CC, and sulfate from 2013 to 2019. The two industrial source types showed sharp drops after the 2013 mandated controls went into effect to phaseout outdated iron/steel production and enforce tighter emission standards for these industries. BB reduced significantly by 2016 and remained low due to the no open field burning policy. Vehicular emissions and road/soil dust declined over the Action's first phase followed by positive upward trends, showing that further emission controls are needed. Nitrate concentrations remained constant although NOX emissions dropped significantly. The lack of a decrease in nitrate may result from increased ammonia emissions from enhanced vehicular NOX controls. The port and shipping emissions were evident implying their impacts on coastal air quality. These results affirm the effectiveness of the Clean Air Actions in reducing primary anthropogenic emissions. However, further emission reductions are needed to meet global health-based air quality standards.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Contaminantes Atmosféricos/análisis , Emisiones de Vehículos/análisis , Material Particulado/análisis , Nitratos , Monitoreo del Ambiente , Contaminación del Aire/análisis , Polvo/análisis , China , Carbón Mineral/análisis , Estaciones del AñoRESUMEN
Heating is a major source of air pollution. To improve air quality, a range of clean heating policies were implemented in China over the past decade. Here, we evaluated the impacts of winter heating and clean heating policies on air quality in China using a novel, observation-based causal inference approach. During 2015-2021, winter heating causally increased annual PM2.5, daily maximum 8-h average O3, and SO2 by 4.6, 2.5, and 2.3 µg m-3, respectively. From 2015 to 2021, the impacts of winter heating on PM2.5 in Beijing and surrounding cities (i.e., "2 + 26" cities) decreased by 5.9 µg m-3 (41.3%), whereas that in other northern cities only decreased by 1.2 µg m-3 (12.9%). This demonstrates the effectiveness of stricter clean heating policies on PM2.5 in "2 + 26" cities. Overall, clean heating policies caused the annual PM2.5 in mainland China to reduce by 1.9 µg m-3 from 2015 to 2021, potentially avoiding 23,556 premature deaths in 2021.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Contaminantes Atmosféricos/análisis , Material Particulado/análisis , Calefacción , Monitoreo del Ambiente , Contaminación del Aire/prevención & control , Contaminación del Aire/análisis , China , Ciudades , Estaciones del Año , Políticas , Aprendizaje AutomáticoRESUMEN
Photochemical losses of ambient volatile organic compounds (VOCs) substantially affect source apportionment analysis. Hourly speciated VOC data measured from April to August 2020 in Tianjin, China were used to analyze the photochemical losses of VOC species and assess the impacts of photochemical losses on source apportionment by comparing the positive matrix factorization (PMF) results based on observed and initial concentration data (OC-PMF and IC-PMF). The initial concentrations of the VOC species were estimated using a photochemical age-based parameterization method. The results suggest that the average photochemical loss of total VOCs (TVOCs) during the ozone pollution period was 2.4 times higher than that during the non-ozone pollution period. The photochemical loss of alkenes was more significant than that of the other VOC species. Temperature has an important effect on photochemical losses, and different VOC species have different sensitivities to temperature; high photochemical losses mainly occurred at temperatures between 25 °C and 35 °C. Photochemical losses reduced the concentrations of highly reactive species in the OC-PMF factor profile. Compared with the IC-PMF results, the OC-PMF contributions of biogenic emissions and polymer production-related industrial sources were underestimated by 73 % and 50 %, respectively, likely due to the oxidation of isoprene and propene, respectively. The contribution of diesel and gasoline evaporation was underestimated by 39 %, which was likely due to the loss of m,p-xylene. Additionally, the contributions of liquefied petroleum gas, vehicle emissions, natural gas, and oil refinery were underestimated by 31 %, 29 %, 23 %, and 13 %, respectively. When the O3 concentrations were higher than 140 µg m-3 or the temperatures were higher than 30 °C, the photochemical losses from most sources increased substantially. Additionally, solar radiation produced different photochemical losses for different source types.
Asunto(s)
Contaminantes Atmosféricos , Compuestos Orgánicos Volátiles , Contaminantes Atmosféricos/análisis , Compuestos Orgánicos Volátiles/análisis , Monitoreo del Ambiente/métodos , Emisiones de Vehículos/análisis , ChinaRESUMEN
The role of chloride in atmospheric chemistry received increased attention over recent years. Given the primary and chemical-active nature of PM2.5-bound chlorine (p-Cl-), it makes sense to get to know the sources and processes of p-Cl-. The temporal behavior of observed p-Cl- concentration based on 1-h high resolution exhibited seasonal variation of high in winter, low in summer and diurnal variation of high in the morning, low in afternoon. Meteorological normalization technique based on random forest was used to disentangle the effects of emission changes which affected the seasonal variation and meteorology which was related to diurnal variation on p-Cl-. Generalized additive model (GAM) identified RH and temperature as the key meteorological factors of p-Cl- generation, and p-Cl- pollution was serious under the condition of low temperature and high RH. Dispersion-normalized positive matrix factorization (DN-PMF) was used to apportion the p-Cl- to its sources, finding that coal combustion was the main source of p-Cl-, followed by biomass burning and industrial process emissions. Our results will provide the basis for further analysis the causes of p-Cl- pollution and composite air pollution control strategies.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Contaminantes Atmosféricos/análisis , Contaminación del Aire/análisis , China , Cloruros , Cloro/análisis , Carbón Mineral/análisis , Monitoreo del Ambiente , Meteorología , Material Particulado/análisis , Estaciones del Año , Emisiones de Vehículos/análisisRESUMEN
Temperature inversion (TI) is one of the meteorological conditions that significantly affect regional air quality. Knowledge gap regarding the impacts of TI on surface PM2.5 in different topographies still existed. In the present study, the occurrence frequency, temperature lapse rate (TLR), depth, and the diurnal variations of TI, surface-based TI (SBTI), elevated TI (ElTI), and multiple layers of TIs (MultiTI) and their impacts on near-surface PM2.5 concentrations over eastern China that covers a range of topographies and climates, are systematically investigated based on global reanalysis ERA5 and the nationwide monitoring PM2.5 dataset from 2014 to 2020. TIs occurred mostly in the early morning. Different types of TIs present distinctive seasonal and spatial patterns. The majority of SBTIs and ElTIs occurred during nighttime in northern China and daytime in southern China, respectively, as the result of their formation mechanisms. SBTIs usually had larger TLR while ElTIs had deeper depth. SBTIs showed strong enhancement effects on PM2.5 concentration over the study domain while ElTIs showed more obvious impacts on northern nocturnal PM2.5. The peak time of PM2.5 was found around 18:00-22:00 LST, and TLR and depth of TIs are thought to be more relevant to PM2.5 peak concentration due to their coincident peak times. The strength of TIs is therefore more crucial in regulating PM2.5 than its occurrence frequency. Based on statistical analysis, our study provided a large picture of the generic spatiotemporal patterns of TIs and illustrated the impacts of different TIs on surface PM2.5 pollution on a diurnal basis. For a deeper understanding of the formation of PM2.5 pollution, more attention needs to be paid to the nocturnal PM2.5 not only at surface level but also at higher levels in the presence of TIs.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Material Particulado/análisis , Contaminantes Atmosféricos/análisis , Temperatura , Monitoreo del Ambiente , Estaciones del Año , Contaminación del Aire/análisis , ChinaRESUMEN
Deterioration of surface ozone (O3) pollution in Northern China over the past few years received much attention. For many cities, it is still under debate whether the trend of surface O3 variation is driven by meteorology or the change in precursors emissions. In this work, a time series decomposition method (Seasonal-Trend decomposition procedure based on Loess (STL)) and random forest (RF) algorithm were utilized to quantify the meteorological impacts on the recorded O3 trend and identify the key meteorological factors affecting O3 pollution in Tianjin, the biggest coastal port city in Northern China. After "removing" the meteorological fluctuations from the observed O3 time series, we found that variation of O3 in Tianjin was largely driven by the changes in precursors emissions. The meteorology was unfavorable for O3 pollution in period of 2015-2016, and turned out to be favorable during 2017-2021. Specifically, meteorology contributed 9.3 µg/m3 O3 (13%) in 2019, together with the increase in precursors emissions, making 2019 to be the worst year of O3 pollution since 2015. Since then, the favorable effects of meteorology on O3 pollution tended to be weaker. Temperature was the most important factor affecting O3 level, followed by air humidity in O3 pollution season. In the midday of summer days, O3 pollution frequently exceeded the standard level (>160 µg/m3) at a combined condition with relative humidity in 40%-50% and temperature > 31°C. Both the temperature and the dryness of the atmosphere need to be subtly considered for summer O3 forecasting.
Asunto(s)
Conceptos Meteorológicos , Meteorología , Humedad , Atmósfera , CiudadesRESUMEN
Emissions from aviation and airport-related activities degrade surface air quality but received limited attention relative to regular transportation sectors like road traffic and waterborne vessels. Statistically, assessing the impact of airport-related emissions remains a challenge due to the fact that its signal in the air quality time series data is largely dwarfed by meteorology and other emissions. Flight-ban policy has been implemented in a number of cities in response to the COVID-19 spread since early 2020, which provides an unprecedented opportunity to examine the changes in air quality attributable to airport closure. It would also be interesting to know whether such an intervention produces extra marginal air quality benefits, in addition to road traffic. Here we investigated the impact of airport-related emissions from a civil airport on nearby NO2 air quality by applying machine learning predictive model to observational data collected from this unique quasi-natural experiment. The whole lockdown-attributable change in NO2 was 16.7 µg/m3, equals to a drop of 73% in NO2 with respect to the business-as-usual level. Meanwhile, the airport flight-ban aviation-attributable NO2 was 3.1 µg/m3, accounting for a marginal reduction of 18.6% of the overall NO2 change that driven by the whole lockdown effect. The airport-related emissions contributed up to 24% of the local ambient NO2 under normal conditions. Additionally, the average impact of airport-related emissions on the nearby air quality was â¼0.01 ± 0.001 µg/m3 NO2 per air-flight. Our results highlight that attention needs to be paid to such a considerable emission source in many places where regular air quality regulatory measures were insufficient to bring NO2 concentration into compliance with the health-based limit.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , COVID-19 , Contaminantes Atmosféricos/análisis , Aeropuertos , COVID-19/epidemiología , Control de Enfermedades Transmisibles , Monitoreo del Ambiente/métodos , Humanos , Aprendizaje Automático , Dióxido de Nitrógeno/análisis , Material Particulado/análisis , Emisiones de Vehículos/análisisRESUMEN
Atmospheric aerosols are important drivers of Arctic climate change through aerosol-cloud-climate interactions. However, large uncertainties remain on the sources and processes controlling particle numbers in both fine and coarse modes. Here, we applied a receptor model and an explainable machine learning technique to understand the sources and drivers of particle numbers from 10 nm to 20 µm in Svalbard. Nucleation, biogenic, secondary, anthropogenic, mineral dust, sea salt and blowing snow aerosols and their major environmental drivers were identified. Our results show that the monthly variations in particles are highly size/source dependent and regulated by meteorology. Secondary and nucleation aerosols are the largest contributors to potential cloud condensation nuclei (CCN, particle number with a diameter larger than 40 nm as a proxy) in the Arctic. Nonlinear responses to temperature were found for biogenic, local dust particles and potential CCN, highlighting the importance of melting sea ice and snow. These results indicate that the aerosol factors will respond to rapid Arctic warming differently and in a nonlinear fashion.
Asunto(s)
Contaminantes Atmosféricos , Aerosoles/análisis , Contaminantes Atmosféricos/análisis , Polvo/análisis , Aprendizaje Automático , Tamaño de la Partícula , SvalbardRESUMEN
Highly time-resolved data for volatile organic compounds (VOCs) can now be monitored. Source analyses of such high time-resolved concentrations provides key information for controlling VOC emissions. This work reviewed the literature on VOCs source analyses published from 2015 to 2021, and assesses the state-of-the-art and the existing issues with these studies. Gas chromatography system and direct-inlet mass spectrometry are the main monitoring tools. Quality control (QC) of the monitoring process is critical prior to analysis. QC includes inspection and replacement of instrument consumables, calibration curve corrections, and reviewing the data. Approximately 54% published papers lacked details on the quantitative evaluation of the effectiveness of QC measures. Among the reviewed works, the number of monitored species varied from 5 to 119, and fraction of papers with more than 90 monitored species increased yearly. US EPA PMF v5.0 was the most commonly used (â¼86%) for VOC source analyses. However, conventional source apportionment directly uses the measured VOCs and may be problematic given the impacts of dispersion and photochemical losses, uncertainty setting of VOCs data, factor resolution, and factor identification. Excluding species with high-reactivity or estimation of corrected concentrations were often applied to reduce the influence of photochemical reactions on the results. However, most reports did not specify the selection criteria or the specific error fraction values in the uncertainty estimation. Model diagnostic indexes were used in 99% of the reports for PMF analysis to determine the factor resolution. Due to lack of known local source profiles, factor identification was mainly achieved using marker species and characteristic species ratios. However, multiple sources had high-collinearity and the same species were often used to identify different sources. Vehicle emissions and fuel evaporation were the primary contributors to VOCs around the world. Contribution of coal combustion in China was substantially higher than in other countries.
Asunto(s)
Contaminantes Atmosféricos , Compuestos Orgánicos Volátiles , Contaminantes Atmosféricos/análisis , China , Monitoreo del Ambiente/métodos , Estados Unidos , United States Environmental Protection Agency , Emisiones de Vehículos/análisis , Compuestos Orgánicos Volátiles/análisisRESUMEN
Evaluating the performance of source apportionment (SA) models is difficult due to the non-observable nature of source contribution in reality. Here we propose a new approach to assess the performance of Chemical Transport Models (CTMs) for SA based on wavelet time-frequency spectral analysis and Grey Incidence Analysis (GIA). For each source category, certain species that better reflect the periodic characteristics of the emission sources were selected as the chemical tracers. The consistency of the time series between the simulated source contributions and the observed source-specific chemical tracers was then examined using a GIA model based on the perspective of similarity, and characterized by the GIA scores. By applying this method to six typical pollution episodes, we evaluated the performance of the Comprehensive Air Quality Model with Extensions-Particle Source Apportionment Technology (CAMx-PSAT) model for PM2.5 SA from different temporal and spatial scales. The source- and episode-dependent optimal average time and main source regions were obtained. This approach is robust for facilitating a relatively meticulous evaluation of the performance of CTMs for PM2.5 SA, and provides additional insight for decision-making for heavy pollution emergencies.