RESUMEN
Diffusive motion accompanies many physical and biological processes. The Stokes-Sutherland-Einstein relation for the translational diffusion coefficient, DT, agrees with experiments done in simple fluids but fails for complex fluids. Moreover, the interdependence between DT and rotational diffusion coefficient, DR, also deviates in complex fluids from the classical relation of DT/DR = 4r2/3 known in simple fluids. Makuch et al. Soft Matter, 2020, 16, 114-124 presented a generalization of the classical translational and rotational diffusion theory for complex fluids. In this work, we empirically verify this model based on simultaneous translational and rotational diffusion measurements. We use fluorescently stained cowpea chlorotic mottle virus (CCMV) particles as monodisperse probes and aqueous polyethylene glycol (PEG) solutions as a model complex fluid. The theory and experimental data obtained from fluorescence correlation spectroscopy (FCS) measurements agreed. Finally, we used the same model and analyzed the diffusion of Yo-Pro-1 stained large ribosomal subunits (LSU) in the cytoplasm and nucleus of living HeLa cells.
Asunto(s)
Polietilenglicoles , Células HeLa , Humanos , Difusión , Polietilenglicoles/química , Rotación , Bromovirus/química , Bromovirus/metabolismo , Espectrometría de FluorescenciaRESUMEN
Time-resolved fluorescence spectroscopy plays a crucial role when studying dynamic properties of complex photochemical systems. Nevertheless, the analysis of measured time decays and the extraction of exponential lifetimes often requires either the experimental assessment or the modeling of the instrument response function (IRF). However, the intrinsic nature of the IRF in the measurement process, which may vary across measurements due to chemical and instrumental factors, jeopardizes the results obtained by reconvolution approaches. In this paper, we introduce a novel methodology, called blind instrument response function identification (BIRFI), which enables the direct estimation of the IRF from the collected data. It capitalizes on the properties of single exponential signals to transform a deconvolution problem into a well-posed system identification problem. To delve into the specifics, we provide a step-by-step description of the BIRFI method and a protocol for its application to fluorescence decays. The performance of BIRFI is evaluated using simulated and time-correlated single-photon counting data. Our results demonstrate that the BIRFI methodology allows an accurate recovery of the IRF, yielding comparable or even superior results compared with those obtained with experimental IRFs when they are used for reconvolution by parametric model fitting.
RESUMEN
Out-of-plane fluctuations, also known as stochastic displacements, of biological membranes play a crucial role in regulating many essential life processes within cells and organelles. Despite the availability of various methods for quantifying membrane dynamics, accurately quantifying complex membrane systems with rapid and tiny fluctuations, such as mitochondria, remains a challenge. In this work, we present a methodology that combines metal/graphene-induced energy transfer (MIET/GIET) with fluorescence correlation spectroscopy (FCS) to quantify out-of-plane fluctuations of membranes with simultaneous spatiotemporal resolution of approximately one nanometer and one microsecond. To validate the technique and spatiotemporal resolution, we measure bending undulations of model membranes. Furthermore, we demonstrate the versatility and applicability of MIET/GIET-FCS for studying diverse membrane systems, including the widely studied fluctuating membrane system of human red blood cells, as well as two unexplored membrane systems with tiny fluctuations, a pore-spanning membrane, and mitochondrial inner/outer membranes.
Asunto(s)
Grafito , Humanos , Espectrometría de Fluorescencia/métodos , Membrana Celular/fisiología , Membranas , Transferencia de EnergíaRESUMEN
The spacing between cells has a significant impact on cell-cell interactions, which are critical to the fate and function of both individual cells and multicellular organisms. However, accurately measuring the distance between cell membranes and the variations between different membranes has proven to be a challenging task. In this study, we employ metal-induced energy transfer (MIET) imaging/spectroscopy to determine and track the intermembrane distance and variations with nanometer precision. We have developed a DNA-based molecular adhesive called the DNA nanobrush, which serves as a cellular adhesive for connecting the plasma membranes of different cells. By manipulating the number of base pairs within the DNA nanobrush, we can modify various aspects of membrane-membrane interactions such as adhesive directionality, distance, and forces. We demonstrate that such nanometer-level changes can be detected with MIET imaging/spectroscopy. Moreover, we successfully employed MIET to measure distance variations between a cellular plasma membrane and a model membrane. This experiment not only showcases the effectiveness of MIET as a powerful tool for accurately quantifying membrane-membrane interactions but also validates the potential of DNA nanobrushes as cellular adhesives. This innovative method holds significant implications for advancing the study of multicellular interactions.
RESUMEN
Water molecules play an important role in the structure, function, and dynamics of (bio-) materials. A direct access to the number of water molecules in nanoscopic volumes can thus give new molecular insights into materials and allow for fine-tuning their properties in sophisticated applications. The determination of the local water content has become possible by the finding that H2 O quenches the fluorescence of red-emitting dyes. Since deuterated water, D2 O, does not induce significant fluorescence quenching, fluorescence lifetime measurements performed in different H2 O/D2 O-ratios yield the local water concentration. We combined this effect with the recently developed fluorescence lifetime single molecule localization microscopy imaging (FL-SMLM) in order to nanoscopically determine the local water content in microgels, i.e. soft hydrogel particles consisting of a cross-linked polymer swollen in water. The change in water content of thermo-responsive microgels when changing from their swollen state at room temperature to a collapsed state at elevated temperature could be analyzed. A clear decrease in water content was found that was, to our surprise, rather uniform throughout the entire microgel volume. Only a slightly higher water content around the dye was found in the periphery with respect to the center of the swollen microgels.
RESUMEN
Fluorescent lipid probes are an invaluable tool for investigating lipid membranes. In particular, localizing certain receptor lipids such as glycosphingolipids within phase-separated membranes is of pivotal interest to understanding the influence of protein-receptor lipid binding on membrane organization. However, fluorescent labeling can readily alter the phase behavior of a lipid membrane because of the interaction of the fluorescent moiety with the membrane interface. Here, we investigated Gb3 glycosphingolipids, serving as receptor lipids for the protein Shiga toxin, with a headgroup attached BODIPY fluorophore separated by a polyethylene glycol (PEG) spacer of different lengths. We found that the diffusion coefficients of the fluorescently labeled Gb3 species in 1,2-dioleoyl-sn-glycero-3-phosphocholine/Gb3 (98:2, n/n) supported lipid bilayers are unaltered by the PEG spacer length. However, quenching as well as graphene-induced energy transfer experiments indicated that the length of the PEG spacer (n = 3 and n = 13) alters the position of the BODIPY fluorophore. In particular, the graphene-induced energy transfer technique provided accurate end-to-end distances between the fluorophores in the two leaflets of the bilayer thus enabling us to quantify the distance between the membrane interface and the fluorophore with sub-nanometer resolution. The spacer with three oligo ethylene glycol groups positioned the BODIPY fluorophore directly at the membrane interface favoring its interaction with the bilayer and thus may disturb lipid packing. However, the longer PEG spacer (n = 13) separated the BODIPY moiety from the membrane surface by 1.5 nm.
Asunto(s)
Grafito , Membrana Dobles de Lípidos , Glicoesfingolípidos , Compuestos de Boro , Colorantes Fluorescentes , Polietilenglicoles , FosfatidilcolinasRESUMEN
Single-molecule localization microscopy (SMLM) at cryogenic temperature opens new avenues to investigate intact biological samples at the nanoscale and perform cryo-correlative studies. Genetically encoded fluorescent proteins (FPs) are markers of choice for cryo-SMLM, but their reduced conformational flexibility below the glass-transition temperature hampers efficient cryo-photoswitching. We investigated cryo-switching of rsEGFP2, one of the most efficient reversibly switchable fluorescent proteins at ambient temperature due to facile cis-trans isomerization of the chromophore. UV-visible microspectrophotometry and X-ray crystallography revealed a completely different switching mechanism at â¼110 K. At this cryogenic temperature, on-off photoswitching involves the formation of two off-states in cis conformation with blue-shifted absorption relative to that of the trans protonated chromophore populated at ambient temperature. Only one of these off-states can be switched back to the fluorescent on-state by 405 nm light, while both of them are sensitive to UV light at 355 nm. Superior recovery to the fluorescent on-state by 355 nm light was confirmed at the single-molecule level. This suggests, as also shown by simulations, that employing 355 nm light in cryo-SMLM experiments using rsEGFP2 and possibly other FPs could improve the effective labeling efficiency achievable with this technique. The rsEGFP2 photoswitching mechanism discovered in this work adds to the panoply of known switching mechanisms in fluorescent proteins.
Asunto(s)
Rayos Ultravioleta , Temperatura , Proteínas Luminiscentes/química , Isomerismo , Conformación ProteicaRESUMEN
Fundamental properties of light unavoidably impose features on images collected using fluorescence microscopes. Modeling these features is ever more important in quantitatively interpreting microscopy images collected at scales on par or smaller than light's wavelength. Here we review the optics responsible for generating fluorescent images, fluorophore properties, microscopy modalities leveraging properties of both light and fluorophores, in addition to the necessarily probabilistic modeling tools imposed by the stochastic nature of light and measurement.
RESUMEN
One of the key phenomena that determine the fluorescence of nanocrystals is the nonradiative Auger-Meitner recombination of excitons. This nonradiative rate affects the nanocrystals' fluorescence intensity, excited state lifetime, and quantum yield. Whereas most of the above properties can be directly measured, the quantum yield is the most difficult to assess. Here we place semiconductor nanocrystals inside a tunable plasmonic nanocavity with subwavelength spacing and modulate their radiative de-excitation rate by changing the cavity size. This allows us to determine absolute values of their fluorescence quantum yield under specific excitation conditions. Moreover, as expected considering the enhanced Auger-Meitner rate for higher multiple excited states, increasing the excitation rate reduces the quantum yield of the nanocrystals.
RESUMEN
Metal-induced energy transfer (MIET) imaging is an easy-to-implement super-resolution modality that achieves nanometer resolution along the optical axis of a microscope. Although its capability in numerous biological and biophysical studies has been demonstrated, its implementation for live-cell imaging with fluorescent proteins is still lacking. Here, we present its applicability and capabilities for live-cell imaging with fluorescent proteins in diverse cell types (adult human stem cells, human osteo-sarcoma cells, and Dictyostelium discoideum cells), and with various fluorescent proteins (GFP, mScarlet, RFP, YPet). We show that MIET imaging achieves nanometer axial mapping of living cellular and subcellular components across multiple time scales, from a few milliseconds to hours, with negligible phototoxic effects.
Asunto(s)
Dictyostelium , Humanos , Microscopía Fluorescente/métodos , Transferencia de Energía , Colorantes FluorescentesRESUMEN
Graphene-induced energy transfer (GIET) is a recently developed fluorescence-spectroscopic technique that achieves subnanometric optical localization of fluorophores along the optical axis of a microscope. GIET is based on the near-field energy transfer from an optically excited fluorescent molecule to a single sheet of graphene. It has been successfully used for estimating interleaflet distances of single lipid bilayers and for investigating the membrane organization of living mitochondria. In this study, we use GIET to measure the cholesterol-induced subtle changes of membrane thickness at the nanoscale. We quantify membrane thickness variations in supported lipid bilayers (SLBs) as a function of lipid composition and increasing cholesterol content. Our findings demonstrate that GIET is an extremely sensitive tool for investigating nanometric structural changes in biomembranes.
Asunto(s)
Grafito , Fosfolípidos , Fosfolípidos/química , Membrana Dobles de Lípidos/química , Colesterol/química , MembranasRESUMEN
A recent addition to the toolbox of super-resolution microscopy methods is fluorescence-lifetime single-molecule localization microscopy (FL-SMLM). The synergy of SMLM and fluorescence-lifetime imaging microscopy (FLIM) combines superior image resolution with lifetime information and can be realized using two complementary experimental approaches: confocal-laser scanning microscopy (CLSM) or wide-field microscopy. Here, we systematically and comprehensively compare these two novel FL-SMLM approaches in different spectral regions. For wide-field FL-SMLM, we use a commercial lifetime camera, and for CLSM-based FL-SMLM we employ a home-built system equipped with a rapid scan unit and a single-photon detector. We characterize the performances of the two systems in localizing single emitters in 3D by combining FL-SMLM with metal-induced energy transfer (MIET) for localization along the third dimension and in the lifetime-based multiplexed bioimaging using DNA-PAINT. Finally, we discuss advantages and disadvantages of wide-field and confocal FL-SMLM and provide practical advice on rational FL-SMLM experiment design.
Asunto(s)
ADN , Imagen Individual de Molécula , Microscopía Confocal/métodos , Microscopía Fluorescente/métodos , Nanotecnología , Imagen Individual de Molécula/métodosRESUMEN
Over the past two decades, super-resolution microscopy has seen a tremendous development in speed and resolution, but for most of its methods, there exists a remarkable gap between lateral and axial resolution, which is by a factor of 2 to 3 worse. One recently developed method to close this gap is metal-induced energy transfer (MIET) imaging, which achieves an axial resolution down to nanometers. It exploits the distance-dependent quenching of fluorescence when a fluorescent molecule is brought close to a metal surface. In the present manuscript, we combine the extreme axial resolution of MIET imaging with the extraordinary lateral resolution of single-molecule localization microscopy, in particular with direct stochastic optical reconstruction microscopy (dSTORM). This combination allows us to achieve isotropic three-dimensional super-resolution imaging of subcellular structures. Moreover, we used spectral demixing for implementing dual-color MIET-dSTORM that allows us to image and colocalize, in three dimensions, two different cellular structures simultaneously.
RESUMEN
Supported lipid bilayers are a well-developed model system for the study of membranes and their associated proteins, such as membrane channels, enzymes, and receptors. These versatile model membranes can be made from various components, ranging from simple synthetic phospholipids to complex mixtures of constituents, mimicking the cell membrane with its relevant physiochemical and molecular phenomena. In addition, the high stability of supported lipid bilayers allows for their study via a wide array of experimental probes. In this work, we describe a platform for supported lipid bilayers that is accessible both electrically and optically, and demonstrate direct optical observation of the transmembrane potential of supported lipid bilayers. We show that the polarization of the supported membrane can be electrically controlled and optically probed using voltage-sensitive dyes. Membrane polarization dynamics is understood through electrochemical impedance spectroscopy and the analysis of an equivalent electrical circuit model. In addition, we describe the effect of the conducting electrode layer on the fluorescence of the optical probe through metal-induced energy transfer, and show that while this energy transfer has an adverse effect on the voltage sensitivity of the fluorescent probe, its strong distance dependency allows for axial localization of fluorescent emitters with ultrahigh accuracy. We conclude with a discussion on possible applications of this platform for the study of voltage-dependent membrane proteins and other processes in membrane biology and surface science.
Asunto(s)
Membrana Dobles de Lípidos , Fosfolípidos , Membrana Celular/metabolismo , Electricidad , Membrana Dobles de Lípidos/química , Potenciales de la MembranaRESUMEN
We present a new method that combines fluorescence correlation spectroscopy (FCS) on the microsecond time scale with fluorescence antibunching measurements on the nanosecond time scale for measuring photophysical rate constants of fluorescent molecules. The antibunching measurements allow us to quantify the average excitation rate of fluorescent molecules within the confocal detection volume of the FCS measurement setup. Knowledge of this value allows us then to quantify, in an absolute manner, the intersystem crossing rate and triplet state lifetime from the microsecond temporal decay of the FCS curves. We present a theoretical analysis of the method and estimate the maximum bias caused by the averaging of all quantities (excitation rate and photophysical rates) over the confocal detection volume, and we show that this bias is smaller than 5% in most cases. We apply the method for measuring the photophysical rate constants of the widely used dyes Rhodamine 110 and ATTO 655.
Asunto(s)
Colorantes Fluorescentes , Colorantes Fluorescentes/química , Espectrometría de Fluorescencia/métodosRESUMEN
We report on proof of principle measurements of a concept for a super-resolution imaging method that is based on excitation field density-dependent lifetime modulation of semiconductor nanocrystals. The prerequisite of the technique is access to semiconductor nanocrystals with emission lifetimes that depend on the excitation intensity. Experimentally, the method requires a confocal microscope with fluorescence-lifetime measurement capability that makes it easily accessible to a broad optical imaging community. We demonstrate with single particle imaging that the method allows one to achieve a spatial resolution of the order of several tens of nanometers at moderate fluorescence excitation intensity.
RESUMEN
We model the transport of electrically charged solute molecules by a laminar flow within a nanoslit microfluidic channel with electrostatic surface potential. We derive the governing convection-diffusion equation, solve it numerically, and compare it with a Taylor-Aris-like approximation, which gives excellent results for small Péclet numbers. We discuss our results in light of designing an assay that can measure simultaneously the hydrodynamic size and electric charge of single molecules by tracking their motion in such nanoslit channels with electrostatic surface potential.
RESUMEN
DNA point accumulation for imaging in nanoscale topography (DNA-PAINT) is a powerful super-resolution technique highly suitable for multi-target (multiplexing) bio-imaging. However, multiplexed imaging of cells is still challenging due to the dense and sticky environment inside a cell. Here, we combine fluorescence lifetime imaging microscopy (FLIM) with DNA-PAINT and use the lifetime information as a multiplexing parameter for targets identification. In contrast to Exchange-PAINT, fluorescence lifetime PAINT (FL-PAINT) can image multiple targets simultaneously and does not require any fluid exchange, thus leaving the sample undisturbed and making the use of flow chambers/microfluidic systems unnecessary. We demonstrate the potential of FL-PAINT by simultaneous imaging of up to three targets in a cell using both wide-field FLIM and 3D time-resolved confocal laser scanning microscopy (CLSM). FL-PAINT can be readily combined with other existing techniques of multiplexed imaging and is therefore a perfect candidate for high-throughput multi-target bio-imaging.