Forage peanut legume as a strategy for improving beef production without increasing livestock greenhouse gas emissions.

The transformation of pastures from a degraded state to sustainable productivity is a major challenge in tropical livestock production. Stoloniferous forage legumes such as Arachis pintoi (forage peanut) are one of the most promising alternatives for intensifying pasture-based beef livestock operations with reduced greenhouse gas (GHG) emissions. This 2-year study assessed beef cattle performance, nutrient intake and digestibility, and balance of GHG emissions in three pasture types (PT): (1) mixed Palisade grass - Urochloa brizantha (Hochst. ex A. Rich.) R.D. Webster (syn. Brachiaria brizantha Stapf cv. Marandu) and forage peanut (A. pintoi Krapov. & W.C. Greg. cv. BRS Mandobi) pastures (Mixed), (2) monoculture Palisade grass pastures with 150 kg of N/ha per year (Fertilised), and (3) monoculture Palisade grass without N fertiliser (Control). Continuous stocking with a variable stocking rate was used in a randomised complete block design, with four replicates per treatment. The average daily gain and carcass gain were not influenced by the PT (P = 0.439 and P = 0.100, respectively) and were, on average, 0.433 kg/animal per day and 83.4 kg/animal, respectively. Fertilised and Mixed pastures increased by 102 and 31.5%, respectively, the liveweight gain per area (kg/ha/yr) compared to the Control pasture (P < 0.001). The heifers in the Mixed pasture had lower CH4 emissions (g/animal per day; P = 0.009), achieving a reduction of 12.6 and 10.1% when compared to the Fertilised and Control pastures, respectively. Annual (N2O) emissions (g/animal) and per kg carcass weight gain were 59.8 and 63.1% lower, respectively, in the Mixed pasture compared to the Fertilised pasture (P < 0.001). Mixed pasture mitigated approximately 23% of kg CO2eq/kg of carcass when substituting 150 kg of N/ha per year via fertiliser. Mixed pastures with forage peanut are a promising solution to recover degraded tropical pastures by providing increased animal production with lower GHG emissions.

COVID-19 impedimetric biosensor based on polypyrrole nanotubes, nickel hydroxide and VHH antibody fragment: specific, sensitive, and rapid viral detection in saliva samples.

SARS-CoV-2 rapid spread required urgent, accurate, and prompt diagnosis to control the virus dissemination and pandemic management. Several sensors were developed using different biorecognition elements to obtain high specificity and sensitivity. However, the task to achieve these parameters in combination with fast detection, simplicity, and portability to identify the biorecognition element even in low concentration remains a challenge. Therefore, we developed an electrochemical biosensor based on polypyrrole nanotubes coupled via Ni(OH)2 ligation to an engineered antigen-binding fragment of heavy chain-only antibodies (VHH) termed Sb#15. Herein we report Sb#15-His6 expression, purification, and characterization of its interaction with the receptor-binding domain (RBD) of SARS-CoV-2 in addition to the construction and validation of a biosensor. The recombinant Sb#15 is correctly folded and interacts with the RBD with a dissociation constant (KD) of 27.1 ± 6.4 nmol/L. The biosensing platform was developed using polypyrrole nanotubes and Ni(OH)2, which can properly orientate the immobilization of Sb#15-His6 at the electrode surface through His-tag interaction for the sensitive SARS-CoV-2 antigen detection. The quantification limit was determined as 0.01 pg/mL using recombinant RBD, which was expressively lower than commercial monoclonal antibodies. In pre-characterized saliva, both Omicron and Delta SARS-CoV-2 were accurately detected only in positive samples, meeting all the requirements recommended by the World Health Organization for in vitro diagnostics. A low sample volume of saliva is needed to perform the detection, providing results within 15 min without further sample preparations. In summary, a new perspective allying recombinant VHHs with biosensor development and real sample detection was explored, addressing the need for accurate, rapid, and sensitive biosensors.

On the importance of longer-term exposure to stressors - A critical review and proposal for multigenerational testing in standard soil invertebrates.

Standard laboratory tests to describe the impact of stressors (most notably: chemicals) on organisms offer a good compromise between feasibility and outcome, i.e., they should be reproducible and provide robust results. However, these tests may underestimate the potential effects of prolonged exposures, particularly for persistent contaminants. Within the last years, we have observed an increase in studies aiming to target prolonged exposure, e.g., via an extended test duration or by multigenerational (MG) exposure. Seemingly, both reduced and increased impacts have been observed in these studies, but it is also clear that no unique test setup was used, and test designs vary widely among studies. To better describe long term effects, MG is a highly relevant aspect which deserves more consideration at various testing and assessment levels. Therefore, we conducted a literature review focusing on available studies performed with soil invertebrates, exposed to stressors for periods longer than in standard laboratory tests, i.e., full life cycle tests, as well as extensions to standard and MG tests. So far, it has been recommended that such studies should cover more than one generation, but this statement is probably too vague. In this contribution, we summarize and critically discuss the information provided in the literature, and we provide suggestions for future research. The currently available test results from long-term studies have produced clear evidence to recommend the implementation of long-term tests in existing regulatory testing requirements (e.g., for pesticides), in particular for persistent substances and also for delayed effects. Consequently, we recommend the inclusion of such longer exposure test designs (e.g., as annexes) in current OECD and ISO guidelines. However, when doing so, the long-term test designs proposed so far have to be critically adapted for a selected set of representative soil invertebrate test species.

Inspiratory muscle training as adjuvant therapy in obstructive sleep apnea: a randomized controlled trial.

The aim of this randomized controlled trial was to analyze the effects of an inspiratory muscle training (IMT) program on apnea and hypopnea index (AHI), inspiratory muscle strength, sleep quality, and daytime sleepiness in individuals with obstructive sleep apnea (OSA), whether or not they used continuous positive airway pressure (CPAP (+/-) therapy. The intervention group underwent IMT with a progressive resistive load of 40-70% of the maximum inspiratory pressure (PImax) for 30 breaths once a day for 12 weeks. The control group was submitted to a similar protocol, but with at a minimum load of 10 cmH2O. Changes in the AHI were the primary outcome. PImax was measured with a digital vacuometer, daytime somnolence was measured by the Epworth sleepiness scale (ESS), and the quality of sleep by the Pittsburgh Sleep Quality Index (PSQI). CPAP use was treated as a confounder and controlled by stratification resulting in 4 subgroups: IMT-/CPAP-, IMT-/CPAP+, IMT+/CPAP-, and IMT+/CPAP+. Sixty-five individuals were included in the final analysis. Significant variations were found in the 4 parameters measured throughout the study after the intervention in both CPAP- and CPAP+ participants: PImax was increased and AHI was reduced, whereas improvements were seen in both ESS and PSQI. The twelve-week IMT program increased inspiratory muscle strength, substantially reduced AHI, and had a positive impact on sleep quality and daytime sleepiness, whether or not participants were using CPAP. Our findings reinforce the role of an IMT program as an adjunct resource in OSA treatment.

Inspiratory muscle training as adjuvant therapy in obstructive sleep apnea: a randomized controlled trial

The aim of this randomized controlled trial was to analyze the effects of an inspiratory muscle training (IMT) program on apnea and hypopnea index (AHI), inspiratory muscle strength, sleep quality, and daytime sleepiness in individuals with obstructive sleep apnea (OSA), whether or not they used continuous positive airway pressure (CPAP (+/−) therapy. The intervention group underwent IMT with a progressive resistive load of 40-70% of the maximum inspiratory pressure (PImax) for 30 breaths once a day for 12 weeks. The control group was submitted to a similar protocol, but with at a minimum load of 10 cmH2O. Changes in the AHI were the primary outcome. PImax was measured with a digital vacuometer, daytime somnolence was measured by the Epworth sleepiness scale (ESS), and the quality of sleep by the Pittsburgh Sleep Quality Index (PSQI). CPAP use was treated as a confounder and controlled by stratification resulting in 4 subgroups: IMT−/CPAP−, IMT−/CPAP+, IMT+/CPAP−, and IMT+/CPAP+. Sixty-five individuals were included in the final analysis. Significant variations were found in the 4 parameters measured throughout the study after the intervention in both CPAP− and CPAP+ participants: PImax was increased and AHI was reduced, whereas improvements were seen in both ESS and PSQI. The twelve-week IMT program increased inspiratory muscle strength, substantially reduced AHI, and had a positive impact on sleep quality and daytime sleepiness, whether or not participants were using CPAP. Our findings reinforce the role of an IMT program as an adjunct resource in OSA treatment.

Novel egg life-stage test with Folsomia candida - A case study with Cadmium (Cd).

Toxicity of pollutants is known to have a different impact depending on the organisms' life stage. Standard tests are often based on one life stage, i.e. effects could be underestimated. We aimed here to develop and optimize a test system using eggs of Folsomia candida (4-5 days) instead of the juveniles (10-12 days old) required by the OECD standard test guideline No. 232 (2009). Accordingly, the exposure time and thus the test duration was extended. Tests with "standard" juveniles (10-12 days old) and, adults (21 and 28 days old) were also performed. Cadmium (Cd) was used as test substance. The extension to the test guideline starts as follows: 1) synchronization of eggs in a thin soil layer on plaster of Paris, 2) selection of viable eggs, 3) burying these eggs in groups of 5 in soil. Afterwards, the test procedure will follow the standard procedure as described in the OECD standard test. Cadmium caused ca. 50% effects on reproduction at 60 mg Cd/kg soil dry weight (DW) when exposing juveniles or adults. There was no significant impact of Cd on the eggs, the hatching process or the latter life stages until ca. 250 mg Cd/kg DW (Cd is stable during this exposure period). Hence, Cd seems to affect reproduction before egg laying, i.e., during egg formation or during juvenile-adult stages. In order to clarify whether other chemicals do act in a similar way testing with different chemicals is highly recommended. Testing of different life stages does provide insight on the mechanisms and effects of contaminants and offers important insight.

Mixture toxicity assessment of a biocidal product based on reproduction and avoidance behaviour of the collembolan Folsomia candida.

Biocidal products represent mixtures that might be released into the environment at application and continuously during service life. Concentration addition (CA) has been proposed as default model to calculate theoretical mixture toxicity. However, the suitability of CA for chronic toxicity towards soil organisms has so far rarely been evaluated and therefore needs further experimental evidence. The present study investigated the toxicity of a wood preservative product and the individual active substances (tebuconazole and IPBC) therein with the aim to evaluate the compliance with the CA prediction for the product. Folsomia candida was selected as test organism for this purpose using the endpoints reproduction and avoidance behaviour. Both endpoints were increasingly impacted by increasing concentrations of the wood preservative product as well as its active substances tested individually. The chronic effects of the product could be predicted by CA with less than 4-fold deviation, while the assessment for avoidance behaviour indicated a strong underestimation. This underestimation could not be attributed to the one known formulation additive, an organic solvent. Overall, the present study provides some more evidence that CA could be applied as default model for standard endpoints of soil organisms, but warns against using CA for behavioural responses.

Correção do zênite gengival no manejo estético pré-restaurador por gengivectomia dupla combinada / Combined double-gingivectomy procedure for gingival zenith position correction in restorative esthetic management

As intervenções odontológicas atuais visam, além do restabelecimento funcional, alternativas terapêuticas para contemplar as necessidades estéticas de nossos pacientes. A crescente exigência por altos padrões estéticos alavanca uma integração entre as diversas especialidades, propondo um tratamento global que objetive a previsibilidade e resolução dos casos clínicos. Nesse contexto, as abordagens periodontais assumem um importante papel, sobretudo em casos em que alterações no complexo dentogengival estão presentes. Além das recessões gengivais, as assimetrias no contorno gengival e exposição excessiva de tecido gengival podem interferir diretamente na composição estética de um sorriso. Diante do exposto, o objetivo do presente trabalho foi relatar um caso clínico em que um procedimento de aumento de coroa clínica foi realizado para promover a harmonia do sorriso no planejamento estético integrado da exposição excessiva de tecido gengival, e hiperplasia gengival dos dentes anteriores inferiores. Foram realizados procedimentos cirúrgicos periodontais para definir o posicionamento da nova margem gengival, proporcionar uma arquitetura gengival fisiológica e obter ambiente mais favorável para que o recondicionamento dentário com resina composta pudesse ser realizado nos dentes superiores.

Etidronate causes minimal changes in the ability of sodium hypochlorite to dissolve organic matter.

AIM: To evaluate the effect of individual and combined use of sodium hypochlorite (NaOCl), etidronate (HEDP) and ethylenediaminetetraacetic acid (EDTA) in tissue dissolution. METHODOLOGY: Sixty fragments of bovine muscle tissue were prepared and their weights determined on a precision scale. The samples were then distributed in the following groups (n = 10): G1 - saline solution (control); G2 - 17% EDTA; G3 - 18% HEDP; G4 - 2.5% NaOCl; G5 - mixture of 5% NaOCl + 17% EDTA; and G6 - mixture of 5% NaOCl + 18% HEDP. The specimens in each group were immersed in the solutions for 5, 10 and 15 min and reweighted at each time period. Analysis of variance (anova) and Tukey's multiple-comparison tests (α<0.05) were applied to identify the intragroup and intergroup differences. RESULTS: G1, G2, G3 and G5 did not dissolve the organic matter. G4 and G6 significantly reduced the weights of specimens at all periods. Amongst the groups, the difference in ability to dissolve organic matter was greater and significant in the following order G4 = G6 > G5 = G3 = G2 = G1 after 5 min of immersion and G4 > G6 > G5 = G3 = G2 = G1 after 10 and 15 min of immersion. CONCLUSION: The only solution capable of dissolving organic matter was NaOCl. In the mixtures analysed, this ability was arrested by EDTA; however, it was minimally affected by the HEDP, proving that this combination, if used during the biomechanical preparation, is able to dissolve of organic matter.

Including the people with disabilities at work: a case study of the job of bricklayer in civil construction in Brazil.

The aim of this paper is to present the results of the evaluation of the job of bricklayer in the construction industry to determine the profile of workers with disabilities who could perform this function and what adjustments are needed. The methods and techniques used in the field study were: direct observation of the activities and the environment, interviews with bricklayers on building sites, a video and photographic record of tasks being carried out to analyze the job of bricklayer, software resources were used. This study set out the disabilities most commonly caused by work accidents in the civil construction industry and simulated the conditions of the individuals to determine whether they could perform the activities of this function and what adaptations are needed. It was observed that workers with hearing impairments could perform activities without any change in the workplace and individuals who had had a leg or foot amputated need to use appropriate prostheses to perform the activities of the function. Thus, it was shown that the activity of professionals with experience in Ergonomics is essential since, by the activity of gathering data and analysing the physical, cognitive and organizational requirements of jobs and by collecting data on and analysing the functional capabilities of the worker with a disability, adaptations to jobs can be adequately defined.

Issues concerning scientific production of including people with disabilities at work.

This article presents the results of a survey carried out on leading periodicals in the areas of Ergonomics, Physiotherapy and Occupational Therapy, the aim of which was to identify scientific publications on the inclusion at work of people with disabilities. The survey of articles published on this topic in the following journals was conducted in December 2010: Applied Ergonomics, Ergonomics, the International Journal of Industrial Ergonomics, Disability and Rehabilitation, and the Journal of Occupational Rehabilitation. The survey covered issues published between 2000 and 2010 and was conducted electronically using the CAPES Periodicals Portal. To collect the articles, it was necessary to check the articles published in each of the issues of each volume of these periodicals. This is how the articles on the topic in question were found. There were 27 articles on the topic of inclusion at work of people with disabilities, of which 13 were published in the Journal of Occupational Rehabilitation and 12 in Disability and Rehabilitation. Thus, it is clear that the issue in question is still a subject that is seldom dealt with in these publications and it is noted that only two articles were published in Ergonomics journals in this period, thus confirming the paucity of scientific publications on this subject.

Genetic analysis of LRRK2 functional domains in Brazilian patients with Parkinson's disease.

BACKGROUND AND PURPOSE: Mutations in the leucine-rich repeat kinase 2 gene (LRRK2) have been associated with Parkinson's disease (PD), and the majority of the pathogenic variants are located in the ROC and MAPKKK domains. METHODS: Exons 29-31 and 38-44 (ROC and MAPKKK domains) were sequenced in 204 patients with PD, mostly Brazilian. RESULTS: We identified four polymorphisms, a novel silent variant p.R1398R and four substitutions: p.T1410M, p.G2019S, p.Y2189C and the novel variant p.C2139S. CONCLUSIONS: The most prevalent mutation was the p.G2019S (2.4%). We consider that the p.T1410M and the p.Y2189C variants are probably polymorphisms and that the p.C2139S mutation is potentially pathogenic.

Crystallization, data collection and phasing of infestin 4, a factor XIIa inhibitor.

Infestin is a protein from Triatoma infestans (kissing bug) composed of seven Kazal-type domains that is further processed to yield several serine protease inhibitors with varying specificities. Infestins 3 and 4 are the last two domains of the infestin gene and are found in vivo in the insect's anterior midgut. The last domain, infestin 4, has been cloned, expressed and purified. Here, the crystallization of infestin 4 using the sitting-drop vapour-diffusion method with PEG 8000 as precipitant is described. Crystals belong to the orthorhombic space group P2(1)2(1)2(1), with unit-cell parameters a = 25.89, b = 45.64, c = 57.41 A. X-ray diffraction data were collected to a maximum resolution of 1.8 A using a synchrotron-radiation source. Initial phases were calculated by molecular replacement using an edited rhodniin molecule as the search model. Structure refinement is in progress.

Crystallization, data collection and phasing of black-eyed pea trypsin/chymotrypsin inhibitor in complex with bovine beta-trypsin.

The black-eyed pea trypsin and chymotrypsin inhibitor (BTCI) is a Bowman-Birk-type inhibitor from Vigna unguiculata seeds. A complex of BTCI with bovine beta-trypsin was crystallized by the hanging-drop vapour-diffusion method with ammonium sulfate as precipitant. Crystals belong to the orthorhombic space group P2(1)2(1)2(1), with unit-cell parameters a = 59.3, b = 61.8, c = 80.0 A. Diffraction data were collected to 2.36 A resolution and were processed to give an overall R(sym) of 0.137. The Matthews coefficient for one complex per asymmetric unit is 2.2 A(3) Da(-1), with a corresponding solvent content of 43%. After molecular replacement and initial refinement, the model gives an R(cryst) of 0.361 and an R(free) of 0.432.

Trypanosoma cruzi glycosomal glyceraldehyde-3-phosphate dehydrogenase: structure, catalytic mechanism and targeted inhibitor design.

The structure of the enzyme glyceraldehyde-3-phosphate dehydrogenase (GAPDH) from glycosomes of the parasite Trypanosoma cruzi, causative agent of Chagas' disease, is reported. The final model at 2.8 A includes the bound cofactor NAD+ and 90 water molecules per monomer and resulted in an Rfactor of 20.1%, Rfree = 22.3%, with good geometry indicators. The structure has no ions bound at the active site resulting in a large change in the side chain conformation of Arg249 which as a consequence forms a salt bridge to Asp210 in the present structure. We propose that this conformational change could be important for the reaction mechanism and possibly a common feature of many GAPDH structures. Comparison with the human enzyme indicates that interfering with this salt bridge could be a new approach to specific inhibitor design, as the equivalent to Asp210 is a leucine in the mammalian enzymes.

Osteogenic potential of autogenic demineralized dentin implanted in bony defects in dogs.

The bone morphogenetic properties of implants of autogenic demineralized dentin were evaluated. The dentin matrix was implanted as small pieces and as thin slices in experimental mandibular osseous defects in dogs. The dentin implants were obtained from mandibular incisor teeth from the same dogs used in the experiment. Experimental interradicular osseous defects were surgically created in the mandibular premolars areas. 2 of the 3 defects were filled with either pieces or slices of prepared dentin. The 3rd defect served as an unfilled control. The results indicate that all demineralized autogenic dentin implants induce bone formation. There was an increase in the osteogenic capacity of the implant when the samples were used as thin slices. The slices of dentin matrix give no evidence of resorption and were readily incorporated into the new bone deposited. The end product was represented by a trabecular bone joined to the dentin matrix slices. In the case of the small piece samples, the specimens were readily resorbed and replaced by new deposits of cancelous bone. The osteogenic capacity of the small piece samples of the dentin matrix is less efficient comparable to the thin slice samples of the same implant material.