RESUMEN
Semiconducting carbon nanotubes (s-CNTs) have emerged as a promising alternative to traditional silicon for ultrascaled field-effect transistors (FETs), owing to their exceptional properties. Aligned s-CNTs (A-CNTs) are particularly favored for practical applications due to their ability to provide higher driving current and lower contact resistance compared with individual s-CNTs or random networks. Achieving high-semiconducting-purity A-CNTs typically involves conjugated polymer wrapping for selective separation of s-CNTs, followed by self-assembly techniques. However, the presence of the polymer wrapper on A-CNTs can adversely impact electrical contact, gating efficiency, carrier transport, and device-to-device variations, necessitating its complete removal. While various methods have been explored for polymer removal, accurately characterizing the extent of removal remains a challenge. Traditional techniques such as absorption spectroscopy and X-ray photoelectron spectroscopy (XPS) may not accurately depict the remaining polymer content on A-CNTs due to their inherent detection limits. Consequently, the performance of FETs based on pure polymer-wrapper-free A-CNTs is unclear. In this study, we present an approach for preparing high-semiconducting-purity and polymer-wrapper-free A-CNTs using poly[(9,9-dioctylfluorenyl-2,7-dinitrilomethine)-(9,9-dioctylfluorenyl-2,7-dimethine)] (PFO-N-PFO), a degradable polymer, in conjunction with a modified dimension-limited self-alignment process (m-DLSA). Comprehensive transmission electron microscopy (TEM) characterizations, complemented by absorption and XPS characterizations, provide robust evidence of the successful near-complete removal of the polymer wrapper via a cleaning procedure involving acidic degradation, hot solvent rinsing, and vacuum annealing. Furthermore, top-gated FETs based on these high-semiconducting-purity and polymer-wrapper-free A-CNTs exhibit good performance metrics, including an on-current (Ion) of 2.2 mA/µm, peak transconductance (gm) of 1.1 mS/µm, low contact resistance (Rc) of 191 Ω·µm, and negligible hysteresis, representing a significant advancement in the CNT-based FET technology.
RESUMEN
A deep understanding of the interface states in metal-oxide-semiconductor (MOS) structures is the premise of improving the gate stack quality, which sets the foundation for building field-effect transistors (FETs) with high performance and high reliability. Although MOSFETs built on aligned semiconducting carbon nanotube (A-CNT) arrays have been considered ideal energy-efficient successors to commercial silicon (Si) transistors, research on the interface states of A-CNT MOS devices, let alone their optimization, is lacking. Here, we fabricate MOS capacitors based on an A-CNT array with a well-designed layout and accurately measure the capacitance-voltage and conductance-voltage (C-V and G-V) data. Then, the gate electrostatics and the physical origins of interface states are systematically analyzed and revealed. In particular, targeted improvement of gate dielectric growth in the A-CNT MOS device contributes to suppressing the interface state density (Dit) to 6.1 × 1011 cm-2 eV-1, which is a record for CNT- or low-dimensional semiconductors-based MOSFETs, boosting a record transconductance (gm) of 2.42 mS/µm and an on-off ratio of 105. Further decreasing Dit below 1 × 1011 cm-2 eV-1 is necessary for A-CNT MOSFETs to achieve the expected high energy efficiency.
RESUMEN
The glass infiltration technique was employed for surface modification of zirconia implants in this study. The prepared glass-infiltrated zirconia with low infiltrating temperature showed excellent mechanical properties and enough infiltrating layer. The zirconia substrate was pre-sintered at 1,200°C and the glass infiltration depth reached 400 µm after infiltrating at 1,200°C for 10 h. The infiltrating glass has good wetting ability, thermal expansion match and good chemical compatibility with the zirconia substrate. Indentation fracture toughness and flexural strength of the dense sintered glass-infiltrated zirconia composite are respectively 5.37±0.45 MPaâ¢m1/2 and 841.03±89.31 MPa. Its elasticity modulus is 163.99±7.6 GPa and has about 500 µm infiltrating layer. The glass-infiltrated zirconia can be acid etched to a medium roughness (1.29±0.09 µm) with a flexural strength of 823.65±87.46 MPa, which promotes cell proliferation and has potential for dental implants.
Asunto(s)
Implantes Dentales , Resistencia Flexional , Vidrio , Ensayo de Materiales , Propiedades de Superficie , Circonio , Circonio/química , Vidrio/química , Módulo de Elasticidad , Temperatura , Materiales Dentales/química , Grabado Ácido DentalRESUMEN
Quinoa is a nutrient-dense pseudocereal that has garnered global attention for its potential to bolster food security and nutrition. Despite its celebrated status, the detailed nutritional profiles of various quinoa varieties remain poorly understood, which poses a significant barrier to the strategic cultivation and utilization of quinoa's genetic diversity to combat malnutrition. The impetus for this research lies in the urgent need to identify superior quinoa strains that can be tailored to meet specific nutritional requirements and adapt to diverse agro-ecological zones. Our findings reveal substantial variation in nutrient content across different quinoa varieties, highlighting the variety ZLZX-8 as a particularly nutrient-rich strain with the highest levels of protein, fat, essential fatty acids, amino acids, and key minerals such as Mg, K, and Zn. Moreover, ZLZX-8's exceptional antioxidant capacity suggests it may have additional health benefits beyond its macronutrient profile. In contrast, ZLZX-7 stands out for its dietary fiber and phenolic content, which are critical for digestive health and disease prevention, respectively. Meanwhile, ZLZX-5, with its high starch content, could be better suited for energy production in dietary applications. Notably, the study also uncovers a correlation between grain color and nutrient profile, with colored quinoa varieties exhibiting superior fiber, inositol, phenolic content, and antioxidant activity compared to their white counterparts. This work lays the groundwork for an informed selection of quinoa varieties that can enhance dietary quality, support local and global food systems, and contribute to the fight against malnutrition.
RESUMEN
Semiconducting carbon nanotubes (CNTs) are considered as the most promising channel material to construct ultrascaled field-effect transistors, but the perfect sp2 CâC structure makes stable doping difficult, which limits the electrical designability of CNT devices. Here, an inner doping method is developed by filling CNTs with 1D halide perovskites to form a coaxial heterojunction, which enables a stable n-type field-effect transistor for constructing complementary metal-oxide-semiconductor electronics. Most importantly, a quasi-broken-gap (BG) heterojunction tunnel field-effect transistor (TFET) is first demonstrated based on an individual partial-filling CsPbBr3/CNT and exhibits a subthreshold swing of 35 mV dec-1 with a high on-state current of up to 4.9 µA per tube and an on/off current ratio of up to 105 at room temperature. The quasi-BG TFET based on the CsPbBr3/CNT coaxial heterojunction paves the way for constructing high-performance and ultralow power consumption integrated circuits.
RESUMEN
Diodes based on p-n junctions are fundamental building blocks for numerous circuits, including rectifiers, photovoltaic cells, light-emitting diodes (LEDs), and photodetectors. However, conventional doping techniques to form p- or n-type semiconductors introduce impurities that lead to Coulomb scattering. When it comes to low-dimensional materials, controllable and stable doping is challenging due to the feature of atomic thickness. Here, by selectively depositing dielectric layers of Y2O3 and AlN, direct formation of wafer-scale carbon-nanotube (CNT) diodes are demonstrated with high yield and spatial controllability. It is found that the oxygen interstitials in Y2O3, and the oxygen vacancy together with Al-Al bond in AlN/Y2O3 electrostatically modulate the intrinsic CNTs channel, which leads to p- and n-type conductance, respectively. These CNTs diodes exhibit a high rectification ratio (>104) and gate-tunable rectification behavior. Based on these results, we demonstrate the applicability of the diodes in electrostatic discharge (ESD) protection and photodetection.
RESUMEN
Carbon nanotubes (CNTs), due to excellent electronic properties, are emerging as a promising semiconductor for diverse electronic applications with superiority over silicon. However, until now, the supposed superiority of CNTs by "head-to-head" comparison within a well-defined voltage range remains unrealized. Here, we report aligned CNT (ACNT)-based electronics on a glass wafer and successfully develop a 250-nm gate length ACNT-based field-effect transistor (FET) with an almost identical transfer curve to a "90-nm" node silicon device, indicating a three- to four-generation superiority. Moreover, a record gate delay of 9.86 ps is achieved by our ring oscillator, which exceeds silicon even at a lower supply voltage. Furthermore, the fabrication of basic logic gates indicates the potential for further digital integrated circuits. All of these results highlight ACNT-based FETs on the glass wafer as an effective solution/platform for further development of CNT-based electronics.
RESUMEN
The semiconducting carbon nanotube (CNT) has been considered a promising candidate for future radiofrequency (RF) electronics due to its excellent electrical properties of high mobility and small capacitance. After decades of development, great progress has been achieved on CNT-based RF field-effect transistors (FETs). However, almost all elevations are owing to advancement of the CNT materials and fabrication process, while the study of device architecture is seldom considered and reported. In this work, we innovatively combined device architecture and related doping processes to further optimize CNT-based RF FETs by guiding process or materials with collaborative optimization for the first time and explore their effect on device performance carefully and statistically. Based on more mature random-oriented CNT materials, we fabricated CNT-based RF FETs having three different gate positions of device architecture variation accompanied by suitable doping schemes. The optimized FETs obtained 2-3 times of current density (transconductance) and 1.3 times the cutoff frequency and maximum oscillation frequency compared with unoptimized devices at the same channel length. After transistor-level verification of effect, we further built a CNT RF amplifier and demonstrated almost 10 dB of transducer gain improvement operating at 8 GHz for X-band application. The achieved results from this work would help further improve CNT RF performance beyond the materials and process point of view.
RESUMEN
Graphene nanoribbons (GNRs) are promising in nanoelectronics for their quasi-1D structures with tunable bandgaps. The methods for controllable fabrication of high-quality GNRs are still limited. Here a way to generate sub-5-nm GNRs by annealing single-walled carbon nanotubes (SWCNTs) on Cu(111) is demonstrated. The structural evolution process is characterized by low-temperature scanning tunneling microscopy. Substrate-dependent measurements on Au(111) and Ru(0001) reveal that the intermediate strong SWCNT-surface interaction plays a pivotal role in the formation of GNRs.
RESUMEN
BACKGROUND/AIM: Cisplatin resistance often leads to treatment futility and elevated mortality rates in patients with lung cancer. One promising strategy to address this challenge involves the integration of traditional Chinese medicine (TCM) with chemotherapeutic drugs. Currently, the potential synergistic effect and underlying mechanism of polyphyllin II (PPII) and cisplatin combination in combating cisplatin (DDP) resistance in lung cancer remain unexplored. MATERIALS AND METHODS: In this study, we established a cisplatin resistance model using A549 cells and explored the underlying mechanisms of PPII in combination with cisplatin in A549/DDP resistant cells. Specifically, we assessed the impact of PPII combined with cisplatin on A549/DDP cell proliferation, viability, and the expression of apoptosis-related proteins. To gain deeper insights into the underlying mechanism, we examined the effects of PPII and cisplatin on mitochondrial function in A549/DDP cells. RESULTS: This combination induced cell cycle arrest at both the S phase and G2/M phase in A549/DDP cells, thereby promoting apoptosis. Western blotting confirmed that DDP acted synergistically with PPII to enhance the expression of apoptotic proteins, diminish the expression of anti-apoptotic proteins, and promote the expression of anti-proliferation proteins in the mitochondrial pathway of A549/DDP cells. CONCLUSION: The combination of PPII and cisplatin effectively modulated the mitochondrial function, thereby reversing drug resistance in A549/DDP cells. This innovative combination therapy shows significant promise as a novel strategy for overcoming cisplatin resistance in lung cancer.
Asunto(s)
Antineoplásicos , Neoplasias Pulmonares , Humanos , Cisplatino , Antineoplásicos/farmacología , Antineoplásicos/uso terapéutico , Células A549 , Resistencia a Antineoplásicos/genética , Neoplasias Pulmonares/tratamiento farmacológico , Neoplasias Pulmonares/metabolismo , Apoptosis , Proteínas Reguladoras de la Apoptosis/metabolismo , Mitocondrias/metabolismo , Metabolismo Energético , Proliferación Celular , Línea Celular TumoralRESUMEN
Semiconducting single-walled carbon nanotubes (CNTs) have ideal electronic, chemical, and mechanical properties and are ideal channel materials for constructing transistors in the post-Moore era. Experiments have shown that CNT-based planar CMOS transistors can be scaled down to sub-10 nm technology nodes, demonstrating excellent performance far exceeding the silicon limit. At the same time, CNT electronic technology is essentially a thin-film transistor technology, which enables the construction of chips on such substrates as glass and polymers with an area of several meters, providing technical support for large-area and flexible electronic applications. In addition, since CNT electronics technology involves only low-temperature processes (less than 400 °C), the monolithic 3D integration of logic and memory devices can be realized which can greatly improve the comprehensive performance of the chip and lead to a thousand-fold performance increase for special data structures, especially in AI applications.
RESUMEN
Obesity and related metabolic syndromes pose a serious threat to human health and quality of life. A proper diet is a safe and effective strategy to prevent and control obesity, thus maintaining overall health. However, no consensus exists on the connotations of proper diet, and it is attributed to various factors, including "nutritional dark matter" and the "matrix effect" of food. Accumulating evidence confirms that obesity is associated with the in vivo levels of miRNAs, which serve as potential markers and regulatory targets for obesity onset and progression; food-derived miRNAs can regulate host obesity by targeting the related genes or gut microbiota across the animal kingdom. Host miRNAs mediate food nutrient-gut microbiota-obesity interactions. Thus, miRNAs are important correlates of diet and obesity onset. This review outlines the recent findings on miRNA-mediated food interventions for obesity, thereby elucidating their potential applications. Overall, we provide new perspectives and views on the evaluation of dietary nutrition, which may bear important implications for dietary control and obesity prevention.
Asunto(s)
Microbioma Gastrointestinal , MicroARNs , Animales , Humanos , MicroARNs/genética , Calidad de Vida , Obesidad/metabolismo , Dieta , Microbioma Gastrointestinal/fisiologíaRESUMEN
OBJECTIVE: The objective of this study is to assess the antitumor effects of hederagenin (HDG) in liver cancer (LC) cells and explore the related mechanisms. METHODS AND MATERIALS: HepG2 cells were treated with HDG and cisplatin, respectively. The CCK8 assay was used to detect cell activity, DAPI staining was used to detect the proportion of living cells, TUNEL assay to detect the proportion of apoptotic cells, flow cytometry to detect the membrane potential, fluoroscopic electron microscopy to detect microstructural changes to the mitochondrial, and western blot analysis and high-content screening to detect apoptosisrelated proteins. RESULTS: Treatment with HDG inhibited the growth of HepG2 cells, decreased the proportion of viable cells, increased the proportion of apoptotic cells, and significantly increased the proportion of cells in the G1 phase. Fluorescence staining showed that HDG damaged the mitochondria of HepG2 cells and significantly decreased the number of mitochondria. Flow cytometry showed that HDG decreased the mitochondrial membrane potential of HepG2 cells. Observations by electron microscopy showed that HDG caused swelling and vacuole formation of the mitochondria of HepG2 cells. HDG significantly reduced the average fluorescence intensity of Bcl-2 in HepG2 cells and significantly increased that of the pro-apoptosis proteins Bax, Cytochrome-c, and Caspase-3. CONCLUSION: HDG induced apoptosis of HepG2 cells via the mitochondrial pathway.
RESUMEN
Single-walled carbon nanotubes (SWCNTs) have been attracting extensive attention due to their excellent properties. We have developed a strategy of using coal to synthesize SWCNTs for high performance field-effect transistors (FETs). The high-quality SWCNTs were synthesized by laser ablation using only coal as the carbon source and Co-Ni as the catalyst. We show that coal is a carbon source superior to graphite with higher yield and better selectivity toward SWCNTs with smaller diameters. Without any pre-purification, the as-prepared SWCNTs were directly sorted based on their conductivity and diameter using either aqueous two-phase extraction or organic phase extraction with PCz (poly[9-(1-octylonoyl)-9H-carbazole-2,7-diyl]). The semiconducting SWCNTs sorted by one-step PCz extraction were used to fabricate thin film FETs. The transformation of coal into FETs (and further integrated circuits) demonstrates an efficient way of utilizing natural resources and a marvelous example in green carbon technology. Considering its short steps and high feasibility, it presents great potential in future practical applications not limited to electronics.
RESUMEN
BACKGROUND: Urolithiasis is a common urological disease with increasing incidence worldwide, and preventing its risk poses significant challenges. Here, we used Mendelian randomization (MR) framework to genetically assess the causal nature of multifaceted risk factors on urolithiasis. METHODS: 17 potential risk factors associated with urolithiasis were collected from recently published observational studies, which can be categorized basically into lifestyle factors and circulating biomarkers. The instrumental variables of risk factors were selected from large-scale genome-wide association studies (N ≤ 607,291). Summary-level data on urolithiasis were obtained from UK Biobank (UKB) (3,625 cases and 459,308 noncases) and the FinnGen consortium (5,347 cases and 213,445 noncases). The univariable and multivariable MR analyses were applied to evaluate the causal, independent effect of these potential risk factors upon urolithiasis. Effects from the two consortia were combined by the meta-analysis methods. RESULTS: Higher genetically predicted sex hormone-binding globulin (SHBG, OR, 0.708; 95% CI, 0.555 to 0.903), estradiol (OR, 0.179; 95% CI, 0.042 to 0.751), tea intake (OR, 0.550; 95% CI, 0.345 to 0.878), alcoholic drinks per week (OR, 0.992; 95% CI, 0.987 to 0.997), and some physical activity (e.g., swimming, cycling, keeping fit, and bowling, OR, 0.054; 95% CI, 0.008 to 0.363) were significantly associated with a lower risk of urolithiasis. In the Multivariate Mendelian Randomization (MVMR) analyses, the significant causal associations between estradiol, SHBG, tea intake, and alcoholic drinks per week with urolithiasis were robust even after adjusting for potential confounding variables. However, the previously observed causal association between other exercises and urolithiasis was no longer significant after adjusting for these factors. CONCLUSIONS: The univariable and multivariable MR findings highlight the independent and significant roles of estradiol, SHBG, tea intake, and alcoholic drinks per week in the development of urolithiasis, which might provide a deeper insight into urolithiasis risk factors and supply potential preventative strategies.
Asunto(s)
Estudio de Asociación del Genoma Completo , Urolitiasis , Humanos , Análisis de la Aleatorización Mendeliana , Factores de Riesgo , Urolitiasis/epidemiología , Urolitiasis/genética , Estradiol , Natación , TéRESUMEN
In the era of big data, the growing demand for data transmission capacity requires the communication band to expand from the traditional optical communication windows (â¼1.3-1.6 µm) to the 2 µm band (1.8-2.1 µm). However, the largest bandwidth (â¼30 GHz) of the current high-speed photodetectors for the 2 µm window is considerably less than the developed 1.55 µm band photodetectors based on III-V materials or germanium (>100 GHz). Here, we demonstrate a high-performance carbon nanotube (CNT) photodetector that can operate in both the 2 and 1.55 µm wavelength bands based on high-density CNT arrays on a quartz substrate. The CNT photodetector exhibits a high responsivity of 0.62 A/W and a large 3 dB bandwidth of 40 GHz (setup-limited) at 2 µm. The bandwidth is larger than that of existing photodetectors working in this wavelength range. Moreover, the CNT photodetector operating at 1.55 µm exhibits a setup-limited 3 dB bandwidth over 67 GHz at zero bias. Our work indicates that CNT photodetectors with high performance and low cost have great potential for future high-speed optical communication at both the 2 and 1.55 µm bands.
RESUMEN
The rapid and sensitive detection of trace-level viruses in a simple and reliable way is of great importance for epidemic prevention and control. Here, a multi-functionalized floating gate carbon nanotube field effect transistor (FG-CNT FET) based biosensor is reported for the single virus level detection of SARS-CoV-2 virus antigen and RNA rapidly with a portable sensing platform. The aptamers functionalized sensors can detect SARS-CoV-2 antigens from unprocessed nasopharyngeal swab samples within 1 min. Meanwhile, enhanced by a multi-probe strategy, the FG-CNT FET-based biosensor can detect the long chain RNA directly without amplification down to single virus level within 1 min. The device, constructed with packaged sensor chips and a portable sensing terminal, can distinguish 10 COVID-19 patients from 10 healthy individuals in clinical tests both by the RNAs and antigens by a combination detection strategy with an combined overall percent agreement (OPA) close to 100%. The results provide a general and simple method to enhance the sensitivity of FET-based biochemical sensors for the detection of nucleic acid molecules and demonstrate that the CNT FG FET biosensor is a versatile and reliable integrated platform for ultrasensitive multibiomarker detection without amplification and has great potential for point-of-care (POC) clinical tests.
Asunto(s)
Técnicas Biosensibles , COVID-19 , Nanotubos de Carbono , Humanos , SARS-CoV-2 , COVID-19/diagnóstico , Nanotubos de Carbono/química , Técnicas Biosensibles/métodosRESUMEN
Flexible electronic devices have shown increasingly promising value facilitating our daily lives. However, flexible spintronic devices remain in their infancy. Here, this research demonstrates a type of nonvolatile, low power dissipation, and programmable flexible spin logic device, which is based on the spin-orbit torque in polyimide (PI)/Ta/Pt/Co/Pt heterostructures fabricated via capillary-assisted electrochemical delamination. The magnetization switching ratio is shown to be about 50% for the flexible device and does not change after 100 cycles of bending, indicating the device has stable performance. By designing the path of pulse current, five Boolean logic gates AND, NAND, NOT, NOR, and OR can be realized in an integrated two-element device. Moreover, such peeling-off devices can be successfully transferred to almost any substrate, such as paper and human skin, and maintain high performance. The flexible PI/Ta/Pt/Co/Pt spin logic device serves as logic-in-memory architecture and can be used in wearable electronics.
RESUMEN
Low-dimensional materials with excellent optoelectronic properties and complementary metal-oxide-semiconductor (CMOS) process compatibility have the potential to construct high-performance photodetectors used in a cost-efficient monolithic or hybrid integrated optical communication system. Carbon nanotubes (CNTs) have attracted a lot of attention due to special geometric structure and broad band response, high optical absorption coefficient, ps-level intrinsic light response, high carrier mobility and wafer-scaled production process. Here, we demonstrated a high-performance waveguide-integrated CNT photodetector with asymmetric palladium (Pd) and hafnium (Hf) contact electrodes. The ideal photodetector structure was realized via comparing with simulation and experimental results, where the optimized device achieved a high 3 dB bandwidth â¼48 GHz at 0 V, as well as a responsivity â¼73.62 mA/W and dark current â¼0.157 µA at -2 V bias voltage. This waveguide-integrated CNT photodetector with low dark current and high bandwidth is helpful for next-generation optical communication and high-speed optical interconnects.