Muscle Morphology Does Not Solely Determine Knee Flexion Weakness After Anterior Cruciate Ligament Reconstruction with a Semitendinosus Tendon Graft: A Combined Experimental and Computational Modeling Study.

The distal semitendinosus tendon is commonly harvested for anterior cruciate ligament reconstruction, inducing substantial morbidity at the knee. The aim of this study was to probe how morphological changes of the semitendinosus muscle after harvest of its distal tendon for anterior cruciate ligament reconstruction affects knee flexion strength and whether the knee flexor synergists can compensate for the knee flexion weakness. Ten participants 8-18 months after anterior cruciate ligament reconstruction with an ipsilateral distal semitendinosus tendon autograft performed isometric knee flexion strength testing (15°, 45°, 60°, and 90°; 0° = knee extension) positioned prone on an isokinetic dynamometer. Morphological parameters extracted from magnetic resonance images were used to inform a musculoskeletal model. Knee flexion moments estimated by the model were then compared with those measured experimentally at each knee angle position. A statistically significant between-leg difference in experimentally-measured maximal isometric strength was found at 60° and 90°, but not 15° or 45°, of knee flexion. The musculoskeletal model matched the between-leg differences observed in experimental knee flexion moments at 15° and 45° but did not well estimate between-leg differences with a more flexed knee, particularly at 90°. Further, the knee flexor synergists could not physiologically compensate for weakness in deep knee flexion. These results suggest additional factors other than knee flexor muscle morphology play a role in knee flexion weakness following anterior cruciate ligament reconstruction with a distal semitendinosus tendon graft and thus more work at neural and microscopic levels is required for informing treatment and rehabilitation in this demographic.

Sensitivity of simulated knee joint mechanics to selected human and bovine fibril-reinforced poroelastic material properties.

Fibril-reinforced poroviscoelastic material models are considered state-of-the-art in modeling articular cartilage biomechanics. Yet, cartilage material parameters are often based on bovine tissue properties in computational knee joint models, although bovine properties are distinctly different from those of humans. Thus, we aimed to investigate how cartilage mechanical responses are affected in the knee joint model during walking when fibril-reinforced poroviscoelastic properties of cartilage are based on human data instead of bovine. We constructed a finite element knee joint model in which tibial and femoral cartilages were modeled as fibril-reinforced poroviscoelastic material using either human or bovine data. Joint loading was based on subject-specific gait data. The resulting mechanical responses of knee cartilage were compared between the knee joint models with human or bovine fibril-reinforced poroviscoelastic cartilage properties. Furthermore, we conducted a sensitivity analysis to determine which fibril-reinforced poroviscoelastic material parameters have the greatest impact on cartilage mechanical responses in the knee joint during walking. In general, bovine cartilage properties yielded greater maximum principal stresses and fluid pressures (both up to 30%) when compared to the human cartilage properties during the loading response in both femoral and tibial cartilage sites. Cartilage mechanical responses were very sensitive to the collagen fibril-related material parameter variations during walking while they were unresponsive to proteoglycan matrix or fluid flow-related material parameter variations. Taken together, human cartilage material properties should be accounted for when the goal is to compare absolute mechanical responses of knee joint cartilage as bovine material parameters lead to substantially different cartilage mechanical responses.

Prediction of Knee Joint Compartmental Loading Maxima Utilizing Simple Subject Characteristics and Neural Networks.

Joint loading may affect the development of osteoarthritis, but patient-specific load estimation requires cumbersome motion laboratory equipment. This reliance could be eliminated using artificial neural networks (ANNs) to predict loading from simple input predictors. We used subject-specific musculoskeletal simulations to estimate knee joint contact forces for 290 subjects during over 5000 stance phases of walking and then extracted compartmental and total joint loading maxima from the first and second peaks of the stance phase. We then trained ANN models to predict the loading maxima from predictors that can be measured without motion laboratory equipment (subject mass, height, age, gender, knee abduction-adduction angle, and walking speed). When compared to the target data, our trained models had NRMSEs (RMSEs normalized to the mean of the response variable) between 0.14 and 0.42 and Pearson correlation coefficients between 0.42 and 0.84. The loading maxima were predicted most accurately using the models trained with all predictors. We demonstrated that prediction of knee joint loading maxima may be possible without laboratory-measured motion capture data. This is a promising step in facilitating knee joint loading predictions in simple environments, such as a physician's appointment. In future, the rapid measurement and analysis setup could be utilized to guide patients in rehabilitation to slow development of joint disorders, such as osteoarthritis.

Open-source software library for real-time inertial measurement unit data-based inverse kinematics using OpenSim.

Background: Inertial measurements (IMUs) facilitate the measurement of human motion outside the motion laboratory. A commonly used open-source software for musculoskeletal simulation and analysis of human motion, OpenSim, includes a tool to enable kinematics analysis of IMU data. However, it only enables offline analysis, i.e., analysis after the data has been collected. Extending OpenSim's functionality to allow real-time kinematics analysis would allow real-time feedback for the subject during the measurement session and has uses in e.g., rehabilitation, robotics, and ergonomics. Methods: We developed an open-source software library for real-time inverse kinematics (IK) analysis of IMU data using OpenSim. The software library reads data from IMUs and uses multithreading for concurrent calculation of IK. Its operation delays and throughputs were measured with a varying number of IMUs and parallel computing IK threads using two different musculoskeletal models, one a lower-body and torso model and the other a full-body model. We published the code under an open-source license on GitHub. Results: A standard desktop computer calculated full-body inverse kinematics from treadmill walking at 1.5 m/s with data from 12 IMUs in real-time with a mean delay below 55 ms and reached a throughput of more than 90 samples per second. A laptop computer had similar delays and reached a throughput above 60 samples per second with treadmill walking. Minimal walking kinematics, motion of lower extremities and torso, were calculated from treadmill walking data in real-time with a throughput of 130 samples per second on the laptop and 180 samples per second on the desktop computer, with approximately half the delay of full-body kinematics. Conclusions: The software library enabled real-time inverse kinematical analysis with different numbers of IMUs and customizable musculoskeletal models. The performance results show that subject-specific full-body motion analysis is feasible in real-time, while a laptop computer and IMUs allowed the use of the method outside the motion laboratory.

Morphology of proximal and distal human semitendinosus compartments and the effects of distal tendon harvesting for anterior cruciate ligament reconstruction.

The human semitendinosus muscle is characterized by a tendinous inscription separating proximal and distal neuromuscular compartments. As each compartment is innervated by separate nerve branches, potential exists for independent operation and control of compartments. However, the morphology and function of each compartment have not been thoroughly examined in an adult human population. Further, the distal semitendinosus tendon is typically harvested for use in anterior cruciate ligament reconstruction surgery, which induces long-term morphological changes to the semitendinosus muscle-tendon unit. It remains unknown if muscle morphological alterations following anterior cruciate ligament reconstruction are uniform between proximal and distal semitendinosus compartments. Here, we performed magnetic resonance imaging on 10 individuals who had undergone anterior cruciate ligament reconstruction involving an ipsilateral distal semitendinosus tendon graft 14 ± 4 months prior, extracting morphological parameters of the whole semitendinosus muscle and each individual compartment from both the (non-injured) contralateral and surgical legs. In the contralateral leg, volume and length of the proximal compartment were smaller than the distal compartment. No between-compartment differences in volume or length were found for anterior cruciate ligament reconstructed legs, likely due to greater shortening of the distal compared to the proximal compartment after anterior cruciate ligament reconstruction. The maximal anatomical cross-sectional area of both compartments was substantially smaller on the anterior cruciate ligament reconstructed leg but did not differ between compartments on either leg. The absolute and relative between-leg differences in proximal compartment morphology on the anterior cruciate ligament reconstructed leg were strongly correlated with the corresponding between-leg differences in distal compartment morphological parameters. Specifically, greater between-leg morphological differences in one compartment were highly correlated with large between-leg differences in the other compartment, and vice versa for smaller differences. These relationships indicate that despite the heterogeneity in compartment length and volume, compartment atrophy is not independent or random. Further, the tendinous inscription endpoints were generally positioned at the same proximodistal level as the compartment maximal anatomical cross-sectional areas, providing a wide area over which the tendinous inscription could mechanically interact with compartments. Overall, results suggest the two human semitendinosus compartments are not mechanically independent.

Exploration of muscle-tendon biomechanics one year after Achilles tendon rupture and the compensatory role of flexor hallucis longus.

Achilles tendon (AT) rupture leads to long-term structural and functional impairments. Currently, the predictors of good recovery after rupture are poorly known. Thus, we aimed to explore the interconnections between structural, mechanical, and neuromuscular parameters and their associations with factors that could explain good recovery in patients with non-surgically treated AT rupture. A total of 35 patients with unilateral rupture (6 females) participated in this study. Muscle-tendon structural, mechanical, and neuromuscular parameters were measured 1-year after rupture. Interconnections between the inter-limb differences (Δ) were explored using partial correlations, followed by multivariable linear regression to find associations between the measured factors and the following markers that indicate good recovery: 1) tendon length, 2) tendon non-uniform displacement, and 3) flexor hallucis longus (FHL) normalized EMG amplitude difference between limbs. Δmedial gastrocnemius (MG) (ß = -0.12, p = 0.007) and Δlateral gastrocnemius (ß = -0.086, p = 0.030) subtendon lengths were associated with MG tendon Δstiffness. MG (ß = 11.56, p = 0.003) and soleus (ß = 2.18, p = 0.040) Δsubtendon lengths explained 48 % of variance in FHL EMG amplitude. Regression models for tendon length and non-uniform displacement were not significant. Smaller inter-limb differences in Achilles subtendon lengths were associated with smaller differences in the AT stiffness between limbs, and a smaller contribution of FHL muscle to the plantarflexion torque. In the injured limb, the increased contribution of FHL appears to partially counteract a smaller contribution from MG due to the elongated tendon, however the role of FHL should not be emphasized during rehabilitation to allow recovery of the TS muscles.

Correction: A musculoskeletal finite element model of rat knee joint for evaluating cartilage biomechanics during gait.

[This corrects the article DOI: 10.1371/journal.pcbi.1009398.].

Force-velocity profiling in ice hockey skating: reliability and validity of a simple, low-cost field method.

In recent years, a simple method for force-velocity (F-v) profiling, based on split times, has emerged as a potential tool to examine mechanical variables underlying running sprint performance in field conditions. In this study, the reliability and concurrent validity of F-v profiling based on split times were examined when used for ice hockey skating. It was also tested how a modification of the method, in which the start instant of the sprint is estimated based on optimisation (time shift method), affects the reliability and validity of the method. Both intra- and inter-rater reliability were markedly improved when using the time shift method (approximately 50% decrease in the standard error of measurement). Moreover, the results calculated using the time shift method highly correlated (r > 0.83 for all variables) with the results calculated from a continuously tracked movement of the athlete, which was considered here as the reference method. This study shows that a modification to the previously published simple method for F-v profiling improves intra- and inter-rater reliability of the method in ice hockey skating. The time shift method tested here can be used as a reliable tool to test a player's physical performance characteristic underlying sprint performance in ice hockey skating.

Alterations in the Functional Knee Alignment Are Not an Effective Strategy to Modify the Mediolateral Distribution of Knee Forces During Closed Kinetic Chain Exercises.

Pain felt while performing rehabilitation exercises could be a reason for the low adherence of knee osteoarthritis patients to physical rehabilitation. Reducing compressive forces on the most affected knee regions may help to mitigate the pain. Knee frontal plane positioning with respect to pelvis and foot (functional knee alignment) has been shown to modify the mediolateral distribution of the tibiofemoral joint contact force in walking. Hence, different functional knee alignments could be potentially used to modify joint loading during rehabilitation exercises. The aim was to understand whether utilizing different alignments is an effective strategy to unload specific knee areas while performing rehabilitation exercises. Eight healthy volunteers performed 5 exercises with neutral, medial, and lateral knee alignment. A musculoskeletal model was modified for improved prediction of tibiofemoral contact forces and used to evaluate knee joint kinematics, moments, and contact forces. Functional knee alignment had only a small and inconsistent effect on the mediolateral distribution joint contact force. Moreover, the magnitude of tibiofemoral and patellofemoral contact forces, knee moments, and measured muscle activities was not significantly affected by the alignment. Our results suggest that altering the functional knee alignment is not an effective strategy to unload specific knee regions in physical rehabilitation.

Altered movement strategy during functional movement after an ACL injury, despite ACL reconstruction.

Knee joint functional deficits are common after anterior cruciate ligament (ACL) injury, but different assessment methods of joint function seem to provide contradicting information complicating recovery monitoring. We previously reported improved perceived knee function and functional performance (forward lunge ground contact time) in patients with an ACL injury from pre to 10 months post ACL reconstruction without improvement in knee-specific biomechanics. To further investigate this discrepancy, we additionally analyzed knee extensor and flexor muscle strength, and movement quality in the forward lunge (subjective and objective evaluations) and performed a full lower limb biomechanical analysis of the forward lunge movement. We included 12 patients with an ACL injury (tested before and after ACL reconstructive surgery) and 15 healthy controls from the previous study to the current investigation. Outcome measures were obtained pre and ~11 months post ACL reconstruction for the patients and at a single time point for the controls. Objective movement quality in the patients with an ACL injury showed an improvement from their pre reconstruction surgery visit to the post reconstruction visit but this was not observable in the subjective evaluation. Knee extensor muscle strength declined after the ACL reconstruction by 29% (p = 0.002) and both knee extensors (p < 0.001) and flexors (p = 0.027) were weaker in the patients post ACL reconstruction compared to healthy controls. ACL injured patients had an altered movement strategy in the forward lunge with reduced knee extensors contribution and increased hip extensor contribution compared to the controls both before and after the reconstruction. The altered movement strategy was associated with knee extensor muscle strength. This explorative study with a limited sample size found that clinicians should be aware that significant functional deficits in the knee extensor muscles, both in isolated muscle strength testing and during a functional movement, may be present although patients perceive an improvement in their knee function and present good functional performance without obvious movement quality issues.

A musculoskeletal finite element model of rat knee joint for evaluating cartilage biomechanics during gait.

Abnormal loading of the knee due to injuries or obesity is thought to contribute to the development of osteoarthritis (OA). Small animal models have been used for studying OA progression mechanisms. However, numerical models to study cartilage responses under dynamic loading in preclinical animal models have not been developed. Here we present a musculoskeletal finite element model of a rat knee joint to evaluate cartilage biomechanical responses during a gait cycle. The rat knee joint geometries were obtained from a 3-D MRI dataset and the boundary conditions regarding loading in the joint were extracted from a musculoskeletal model of the rat hindlimb. The fibril-reinforced poroelastic (FRPE) properties of the rat cartilage were derived from data of mechanical indentation tests. Our numerical results showed the relevance of simulating anatomical and locomotion characteristics in the rat knee joint for estimating tissue responses such as contact pressures, stresses, strains, and fluid pressures. We found that the contact pressure and maximum principal strain were virtually constant in the medial compartment whereas they showed the highest values at the beginning of the gait cycle in the lateral compartment. Furthermore, we found that the maximum principal stress increased during the stance phase of gait, with the greatest values at midstance. We anticipate that our approach serves as a first step towards investigating the effects of gait abnormalities on the adaptation and degeneration of rat knee joint tissues and could be used to evaluate biomechanically-driven mechanisms of the progression of OA as a consequence of joint injury or obesity.

In vivo localized gastrocnemius subtendon representation within the healthy and ruptured human Achilles tendon.

The Achilles tendon (AT) is composed of three distinct in-series elastic subtendons, arising from different muscles in the triceps surae. Independent activation of any of these muscles is thought to induce sliding between the adjacent AT subtendons. We aimed to investigate displacement patterns during voluntary contraction (VOL) and selective transcutaneous stimulation of medial (MGstim) and lateral (LGstim) gastrocnemius between ruptured and healthy tendons and to examine the representative areas of AT subtendons. Twenty-eight patients with unilateral AT rupture performed bilateral VOL at 30% of the maximal isometric uninjured plantarflexion torque. AT displacement was analyzed from sagittal B-mode ultrasonography images during VOL, MGstim, and LGstim. Three-way ANOVA revealed a significant two-way interaction of contraction type × location on the tendon displacement [F(10-815) = 3.72, P < 0.001]. The subsequent two-way analysis revealed a significant contraction type × location interaction for tendon displacement [F(10-410)=3.79, P < 0.001] in the uninjured limb only, where LGstim displacement pattern was significantly different from MGstim (P = 0.008) and VOL (P = 0.005). When comparing contraction types between limbs, there were no difference in the displacement patterns, but displacement amplitudes differed. There was no significant difference in the location of maximum or minimum displacement between limbs. The displacement pattern was not different in nonsurgically treated compared with uninjured tendons 1 yr after rupture. However, free tendon stiffness seems to be lower in the injured AT, leading to more displacement during electrically induced contractions compared with the uninjured. Our results suggest that near the calcaneus, LG subtendon is located in the most anterior region adjacent to medial gastrocnemius.NEW & NOTEWORTHY Using selective electrical stimulation, we report the distributions of medial and lateral gastrocnemius subtendon representations within the healthy and ruptured Achilles tendon. In the majority of our sample, lateral gastrocnemius subtendon was found in the most anterior region adjacent to medial gastrocnemius both in the healthy and ruptured, nonsurgically treated tendon. The tendon internal displacement pattern does not seem to differ, but displacement amplitude and nonuniformity differed between healthy and ruptured tendons 1 yr after rupture.

An EMG-Assisted Muscle-Force Driven Finite Element Analysis Pipeline to Investigate Joint- and Tissue-Level Mechanical Responses in Functional Activities: Towards a Rapid Assessment Toolbox.

Joint tissue mechanics (e.g., stress and strain) are believed to have a major involvement in the onset and progression of musculoskeletal disorders, e.g., knee osteoarthritis (KOA). Accordingly, considerable efforts have been made to develop musculoskeletal finite element (MS-FE) models to estimate highly detailed tissue mechanics that predict cartilage degeneration. However, creating such models is time-consuming and requires advanced expertise. This limits these complex, yet promising, MS-FE models to research applications with few participants and makes the models impractical for clinical assessments. Also, these previously developed MS-FE models have not been used to assess activities other than gait. This study introduces and verifies a semi-automated rapid state-of-the-art MS-FE modeling and simulation toolbox incorporating an electromyography- (EMG) assisted MS model and a muscle-force driven FE model of the knee with fibril-reinforced poro(visco)elastic cartilages and menisci. To showcase the usability of the pipeline, we estimated joint- and tissue-level knee mechanics in 15 KOA individuals performing different daily activities. The pipeline was verified by comparing the estimated muscle activations and joint mechanics to existing experimental data. To determine the importance of the EMG-assisted MS analysis approach, results were compared to those from the same FE models but driven by static-optimization-based MS models. The EMG-assisted MS-FE pipeline bore a closer resemblance to experiments compared to the static-optimization-based MS-FE pipeline. Importantly, the developed pipeline showed great potential as a rapid MS-FE analysis toolbox to investigate multiscale knee mechanics during different activities of individuals with KOA.

Toward Tailored Rehabilitation by Implementation of a Novel Musculoskeletal Finite Element Analysis Pipeline.

Tissue-level mechanics (e.g., stress and strain) are important factors governing tissue remodeling and development of knee osteoarthritis (KOA), and hence, the success of physical rehabilitation. To date, no clinically feasible analysis toolbox has been introduced and used to inform clinical decision making with subject-specific in-depth joint mechanics of different activities. Herein, we utilized a rapid state-of-the-art electromyography-assisted musculoskeletal finite element analysis toolbox with fibril-reinforced poro(visco)elastic cartilages and menisci to investigate knee mechanics in different activities. Tissue mechanical responses, believed to govern collagen damage, cell death, and fixed charge density loss of proteoglycans, were characterized within 15 patients with KOA while various daily activities and rehabilitation exercises were performed. Results showed more inter-participant variation in joint mechanics during rehabilitation exercises compared to daily activities. Accordingly, the devised workflow may be used for designing subject-specific rehabilitation protocols. Further, results showed the potential to tailor rehabilitation exercises, or assess capacity for daily activity modifications, to optimally load knee tissue, especially when mechanically-induced cartilage degeneration and adaptation are of interest.

Near infrared spectroscopic evaluation of biochemical and crimp properties of knee joint ligaments and patellar tendon.

Knee ligaments and tendons play an important role in stabilizing and controlling the motions of the knee. Injuries to the ligaments can lead to abnormal mechanical loading of the other supporting tissues (e.g., cartilage and meniscus) and even osteoarthritis. While the condition of knee ligaments can be examined during arthroscopic repair procedures, the arthroscopic evaluation suffers from subjectivity and poor repeatability. Near infrared spectroscopy (NIRS) is capable of non-destructively quantifying the composition and structure of collagen-rich connective tissues, such as articular cartilage and meniscus. Despite the similarities, NIRS-based evaluation of ligament composition has not been previously attempted. In this study, ligaments and patellar tendon of ten bovine stifle joints were measured with NIRS, followed by chemical and histological reference analysis. The relationship between the reference properties of the tissue and NIR spectra was investigated using partial least squares regression. NIRS was found to be sensitive towards the water (R2CV = .65) and collagen (R2CV = .57) contents, while elastin, proteoglycans, and the internal crimp structure remained undetectable. As collagen largely determines the mechanical response of ligaments, we conclude that NIRS demonstrates potential for quantitative evaluation of knee ligaments.

Muscle-tendon morphomechanical properties of non-surgically treated Achilles tendon 1-year post-rupture.

BACKGROUND: Achilles tendon rupture appears to alter stiffness and length of the tendon. These alterations may affect the function of tendon in force transmission and in energy storage and recovery. We studied the mechanical properties of the Achilles' tendon post-rupture and their association with function. METHODS: Twenty-four (20 males, 4 females) participants (mean age: 43 y, 176 cm, 81 kg) were recruited. Ultrasonography and dynamometry were used to assess the muscle-tendon unit morphological and mechanical properties of non-surgically treated patients 1-year post rupture. FINDINGS: Injured tendons were longer with difference of 1.8 cm (95%CI: 0.5-1.9 cm; P < 0.001), and thicker by 0.2 mm (0.2-0.3 mm; P < 0.01). Medial gastrocnemius cross-sectional area was 1.0 cm2 smaller (0.8-1.1 cm2; P < 0.001), fascicles were 0.6 cm shorter (0.5-0.7 cm; P < 0.001) and pennation angle was 2.5° higher (1.3-3.6°; P < 0.001) when compared to the uninjured limb. We found no differences between injured and uninjured tendon stiffness 1-year post-rupture (mean difference: 29.8 N/mm, -7.7-67.3 N/mm; P = 0.170). The injured tendon showed 1.8 mm (1.2-2.4 mm; P < 0.01) lower elongation during maximal voluntary isometric contractions. Patient-reported functional outcome was related to the tendon resting length (ß = 0.68, r(10) = 4.079, P = 0.002). Inter-limb differences in the medial gastrocnemius fascicle length were related to inter-limb differences in maximum contractions (ß = 1.17, r(14) = 2.808, P = 0.014). INTERPRETATION: Longer Achilles tendon resting length was associated with poorer self-evaluated functional outcome. Although the stiffness of non-surgically treated and uninjured tendons was similar 1-year post rupture, plantar flexion strength deficit was still present, possibly due to shorter medial gastrocnemius fascicle length.

In vivo assessment of the passive stretching response of the bicompartmental human semitendinosus muscle using shear-wave elastography.

The semitendinosus muscle contains distinct proximal and distal compartments arranged anatomically in series but separated by a tendinous inscription, with each compartment innervated by separate nerve branches. Although extensively investigated in other mammals, compartment-specific mechanical properties within the human semitendinosus have scarcely been assessed in vivo. Experimental data obtained during muscle-tendon unit stretching (e.g., slack angle) can also be used to validate and/or improve musculoskeletal model estimates of semitendinosus muscle force. The purpose of this study was to investigate the passive stretching response of proximal and distal human semitendinosus compartments to distal (knee) joint extension. Using two-dimensional shear-wave elastography, we bilaterally obtained shear moduli of both semitendinosus compartments from 14 prone-positioned individuals at 10 knee flexion angles [from 90° to 0° (full extension) at 10° intervals]. Passive muscle mechanical characteristics (slack angle, slack shear modulus, and the slope of the increase in shear modulus) were determined for each semitendinosus compartment by fitting a piecewise exponential model to the shear modulus-joint angle data. We found no differences between compartments or legs for slack angle, slack shear modulus, or the slope of the increase in shear modulus. We also found that the experimentally determined slack angle occurred at ∼15°-80° higher knee flexion angles compared with estimates from two commonly used musculoskeletal models, depending on participant and model used. Overall, these findings demonstrate that passive shear modulus-joint angle curves do not differ between proximal and distal human semitendinosus compartments and provide experimental data to improve semitendinosus force estimates derived from musculoskeletal models.NEW & NOTEWORTHY We conducted an elastography-based investigation of the passive stretching response of the proximal and distal compartments of the human semitendinosus muscle and found no difference in shear modulus-joint angle curves between compartments. We also found that common musculoskeletal models tend to misestimate semitendinosus slack angle, most likely due to typical model assumptions. These results provide an important step toward a better understanding of semitendinosus passive muscle mechanics and improving computational estimates of muscle force.

Lower limb muscle activation patterns in ice-hockey skating and associations with skating speed.

In this study, we aimed to describe lower limb kinematic and muscle activation patterns and then to examine the potential associations between those variables and skating speed in highly trained ice-hockey players. Twelve players (age 18.4-22.0 years) performed five maximal 30-metre forward skating sprints. Skating speeds, muscle activities from eight lower limb muscles (gluteus maximus, gluteus medius, adductor magnus, rectus femoris, vastus lateralis, biceps femoris, tibialis anterior and soleus), and sagittal plane joint angles from the hip and knee joint were measured. A lower activity of the gluteus maximus (r = -0.651, p = 0.022, ß = -0.08) and a reduced gluteus maximus to rectus femoris coactivity (r = -0.786, p = 0.002, ß = -3.26) during the recovery phase were found to be associated with faster skating speed. No significant associations were observed between sagittal plane hip and knee kinematics and skating speed. This study provides evidence that muscle activities during the recovery phase of skating may have an important role in skating performance.

A Perturbed Postural Balance Test Using an Instrumented Treadmill - Precision and Accuracy of Belt Movement and Test-Retest Reliability of Balance Measures.

A perturbed postural balance test can be used to investigate balance control under mechanical disturbances. The test is typically performed using purpose-built movable force plates. As instrumented treadmills become increasingly common in biomechanics laboratories and in clinical settings, these devices could be potentially used to assess and train balance control. The purpose of the study was to investigate how an instrumented treadmill applies to perturbed postural balance test. This was investigated by assessing the precision and reliability of the treadmill belt movement and the test-retest reliability of perturbed postural balance test over 5 days. Postural balance variables were calculated from the center of pressure trajectory and included peak displacement, time to peak displacement, and recovery displacement. Additionally, the study investigated short-term learning effects over the 5 days. Eight healthy participants (aged 24-43 years) were assessed for 5 consecutive days with four different perturbation protocols. Center of pressure (COP) data were collected using the force plates of the treadmill while participant and belt movements were measured with an optical motion capture system. The results show that the treadmill can reliably deliver the intended perturbations with <1% deviation in total displacement and with minimal variability between days and participants (typical errors 0.06-2.71%). However, the treadmill was not able to reach the programmed 4 m/s2 acceleration, reaching only about 75% of it. Test-retest reliability of the selected postural balance variables ranged from poor to good (ICC 0.156-0.752) with typical errors between 4.3 and 28.2%. Learning effects were detected based on linear or quadratic trends (p < 0.05) in peak displacement of the slow forward and fast backward protocols and in time to peak displacement in slow and fast backward protocols. The participants altered the initial location of the COP relative to the foot depending on the direction of the perturbation. In conclusion, the precision and accuracy of belt movement were found to be excellent. Test-retest reliability of the balance test utilizing an instrumented treadmill ranged from poor to good which is, in line with previous investigations using purpose-built devices for perturbed postural balance assessment.

Biomechanical, biochemical, and near infrared spectral data of bovine knee ligaments and patellar tendon.

Knee joint ligaments and patellar tendon are rope-like tissues that enable the proper function of the knee by connecting the bones that form the joint. A better understanding of ligament structure-function relationships is needed to develop objective and reliable diagnostic methods for ligaments. Recently, arthroscopic near infrared spectroscopy (NIR) has shown the potential to quantitatively evaluate the health of the cartilages and menisci of the knee. In this dataset, we present a unique combination of NIR spectral data, biomechanical properties, and biochemical composition of bovine primary knee ligaments and patellar tendon (10 knees, 50 tissue samples). NIR spectral data were measured at 5 locations in each sample, biomechanical properties were obtained with tensile testing, and biochemical composition was quantified using colorimetric biochemical methods. The data can be reused for investigations of structure-function relationships of knee ligaments and patellar tendon, for the development of NIR spectroscopic methods to quantify the health of these tissues, and to develop new computational models to describe ligament and tendon biomechanics.