RESUMEN
Substrate-induced biaxial compressive stress and threading dislocations (TDs) have been recognized to severely impair the performance, stability, and reliability of InGaN/GaN light-emitting diodes (LEDs) for quite some time. In this study, a defect-selective-etched (DSE) porous GaN layer is fabricated employing electro-chemical etching and applied as a buffer layer for the development of InGaN/GaN LEDs with high quantum efficiency. Based on the analysis of photoluminescence and micro-Raman spectra, it has been revealed that the overgrown GaN epilayer on the DSE porous GaN has a relatively low TDs and relaxation of compressive stress in comparison to the conventional GaN epilayer. The remarkable improvement in the internal quantum efficiency of the InGaN/GaN LEDs is directly attributable to the strong radiative recombination in InGaN/GaN multi-quantum-wells caused by stress relaxation and TDs annihilation. Our findings indicate that the use of DSE porous GaN as a buffer layer may be a viable approach for producing crystalline GaN epilayers and high-performance LEDs.
RESUMEN
Self-assembled alkane layers are introduced between graphene layers to physically block nanometer size defects in graphene and lateral gas pathways between graphene layers. A well-defined hexatriacontane (HTC) monolayer on graphene could cover nanometer-size defects because of the flexible nature and strong intermolecular van der Waals interactions of alkane, despite the roughness of graphene. In addition, HTC multilayers between graphene layers greatly improve their adhesion. This indicates that HTC multilayers between graphene layers can effectively block the lateral pathway between graphene layers by filling open space with close-packed self-assembled alkanes. By these mechanisms, alternately stacked composites of graphene and self-assembled alkane layers greatly increase the gas-barrier property to a water vapor transmission rate (WVTR) as low as 1.2 × 10-3 g/(m2 day), whereas stacked graphene layers generally show a WVTR < 0.5 g/(m2 day). Furthermore, the self-assembled alkane layers have superior crystallinity and wide bandgap, so they have little effect on the transmittance.
RESUMEN
The electro-optic effect in two-dimensional (2D) MgO nanoflakes synthesized by a microwave-assisted process is demonstrated using a designed optical fiber modulator. The guiding properties of intense core modes excited by the material cavity are modulated by the external electric field. The feasibility of 2D MgO nanoflakes as an effective electro-optic modulator and switching are experimentally verified for the first time, to the best of our knowledge. The proposed optical-fiber-based electro-optic modulator achieves a linear wavelength shift with a high sensitivity of 12.87 pm/V(77.22 nm/kV/mm, in the electric field). The results show that MgO, as a metal oxide 2D material, is a very promising material for electro-optic modulators and switching.
RESUMEN
We report on the electrical characteristics of AlGaN/GaN high-electron mobility transistors (HEMTs) with hexagonal boron nitride (h-BN) as a passivation capping layer. The HEMTs with h-BN layers showed an increase in current drainage and 103-times reduction in the gate-leakage current compared with those of conventional unpassivated HEMTs. Moreover, the extrinsic transconductance and the pulse responses were improved due to the reduced charge-trapping effect at the surface of HEMTs. From our observations, the h-BN can be used as a passivation capping layer for high-power electronic devices.
RESUMEN
High-density threading dislocations, the presence of biaxial compressive strain, and heat generation are the major limitations obstructing the performance and reliability of light emitting diodes (LEDs). Herein, we demonstrate a facile epitaxial lateral overgrowth (ELOG) method by incorporating boron nitride nanotubes (BNNTs) on a sapphire substrate by spray coating to resolve the above issues. Atomic force microscopy, X-ray diffraction, micro-Raman, and photoluminescence measurements confirmed the growth of a high quality GaN epilayer on the BNNT-coated sapphire substrate with reduced threading dislocations and compressive strain owing to the ELOG process. GaN LEDs fabricated using this approach showed a significant enhancement in the internal quantum efficiency and electroluminescence intensity compared to conventional LEDs grown on sapphire. Moreover, reduced efficiency droop and surface temperature at high injection currents were achieved due to the excellent thermal stability and conductivity of BNNTs. Based on our findings we infer that the BNNTs would be a promising material for high power devices vulnerable to self-heating problems.
RESUMEN
This paper reports a highly reliable transparent conductive electrode (TCE) that integrates silver nanowires (AgNWs) and high-quality graphene as a protecting layer. Graphene with minimized defects and large graphene domains has been successfully obtained through a facile two-step growth approach. Ultraviolet light emitting diodes (UV-LEDs) were fabricated with AgNWs or hybrid electrodes where AgNWs were combined with two-step grown graphene (A-2GE) or conventional one-step grown graphene (A-1GE). The device performance and reliability of the UV-LEDs with three different electrodes were compared. The A-2GE offered high figure of merit owing to the excellent UV transmittance and reduced sheet resistance. As a consequence, the UV-LEDs made with A-2GE demonstrated reduced forward voltage, enhanced electroluminescence (EL) intensity, and alleviated efficiency droop. The effects of joule heating and UV light illumination on the electrode stability were also studied. The present findings prove superior performance of the A-2GE under high current injection and continuous operation of UV LED, compared to other electrodes. From our observation, the A-2GE would be a reliable TCE for high power UV-LEDs.
RESUMEN
Using single-walled carbon nanotubes (SWCNTs) as nanomasks on an undoped GaN template, a significant biaxial stress relaxation was achieved in the subsequently-grown Si-doped n-GaN layer. Enhanced near band edge (NBE) emission intensity, similar free carrier concentrations, and the reduced peak width of the asymmetric (102) crystallographic plane all confirmed the suppression of threading dislocations due to the nanoepitaxial growth process. Temperature-dependent photoluminescence (PL) revealed improved internal quantum efficiency (IQE) of InGaN/GaN multi-quantum wells (MQWs) grown on this n-GaN layer. Furthermore, enhanced light output power and a remarkable reduction in efficiency droop were observed for the blue light-emitting diodes (LEDs), especially at higher injection currents. Our results emphasize the strong potential for SWCNTs as nanomasks in the heteroepitaxy of GaN-based devices without the exploitation of complicated lithography or etching processes.
RESUMEN
The chemical vapor deposition (CVD) method to obtain tailored graphene as a transparent and flexible gas barrier has been developed. By separating nucleation step from growth, we could reduce early graphene nucleation density and thus induce better stitching between domain boundaries in the second growth step. Furthermore, two step growth in conjunction with electrochemical polishing of Cu foils achieved large graphene domains and improved graphene quality with minimized defects. The performance of resulting graphene as a gas barrier was superior to the graphene obtained by one-step growth on polished or unpolished Cu foils. The CVD graphene reported here could open up the possibility for exploring graphene-based gas barrier due to the minimized density of defect area.
RESUMEN
We fabricated light-emitting device by using CdSe/ZnS quantum dots (QDs) on InGaN/GaN blue light-emitting diodes (LEDs) for converting blue emission into green emission. By adding Au nanoparticles (ANPs) to generate localized surface plasmon mode, the integrated intensity of green emission of LEDs with CdSe/ZnS QDs on ANPs is enhanced by about 55%, without any drawback in electrical characteristics of LEDs. This result is attributed to an increased conversion efficiency by resonance coupling between localized surface plasmons in ANPs and excitons in CdSe/ZnS QDs.
RESUMEN
A facile method to facilitate epitaxial lateral overgrowth (ELO) of gallium nitride (GaN) was developed by using single-walled carbon nanotubes (SWCNTs). High-quality GaN was achieved on sapphire by simply coating the SWCNTs as an intermediate layer for stress and defect mitigation. SWCNTs maintained their integrity at high reaction temperature and led to suppression of edge dislocations and biaxial stress relaxation by up to 0.32 GPa in a GaN template layer. InGaN/GaN multi-quantum-well light-emitting diodes (LEDs) on this high-quality GaN template offered enhanced internal quantum efficiency and light output power with reduced efficiency droop. The method developed here has high potential to replace current ELO methods such as patterned sapphire substrates or buffer layers like SiO2 and SiNx.
RESUMEN
Carrier localization phenomena in indium-rich InGaN/GaN multiple quantum wells (MQWs) grown on sapphire and GaN substrates were investigated. Temperature-dependent photoluminescence (PL) spectroscopy, ultraviolet near-field scanning optical microscopy (NSOM), and confocal time-resolved PL (TRPL) spectroscopy were employed to verify the correlation between carrier localization and crystal quality. From the spatially resolved PL measurements, we observed that the distribution and shape of luminescent clusters, which were known as an outcome of the carrier localization, are strongly affected by the crystalline quality. Spectroscopic analysis of the NSOM signal shows that carrier localization of MQWs with low crystalline quality is different from that of MQWs with high crystalline quality. This interrelation between carrier localization and crystal quality is well supported by confocal TRPL results.
RESUMEN
GaN-based ultraviolet (UV) LEDs are widely used in numerous applications, including white light pump sources and high-density optical data storage. However, one notorious issue is low hole injection rate in p-type transport layer due to poorly activated holes and spontaneous polarization, giving rise to insufficient light emission efficiency. Therefore, improving hole injection rate is a key step towards high performance UV-LEDs. Here, we report a new method of suppressing spontaneous polarization in p-type region to augment light output of UV-LEDs. This was achieved by simply passivating graphene oxide (GO) on top of the fully fabricated LED. The dipole layer formed by the passivated GO enhanced hole injection rate by suppressing spontaneous polarization in p-type region. The homogeneity of electroluminescence intensity in active layers was improved due to band filling effect. As a consequence, the light output was enhanced by 60% in linear current region. Our simple approach of suppressing spontaneous polarization of p-GaN using GO passivation disrupts the current state of the art technology and will be useful for high-efficiency UV-LED technology.
RESUMEN
We report the growth of high-quality GaN layer on single-walled carbon nanotubes (SWCNTs) and graphene hybrid structure (CGH) as intermediate layer between GaN and sapphire substrate by metal-organic chemical vapor deposition (MOCVD) and fabrication of light emitting diodes (LEDs) using them. The SWCNTs on graphene act as nucleation seeds, resulting in the formation of kink bonds along SWCNTs with the basal plane of the substrate. In the x-ray diffraction, Raman and photoluminescence spectra, high crystalline quality of GaN layer grown on CGH/sapphire was observed due to the reduced threading dislocation and efficient relaxation of residual compressive strain caused by lateral overgrowth process. When applied to the LED structure, the current-voltage characteristics and electroluminescence (EL) performance exhibit that blue LEDs fabricated on CGH/sapphire well-operate at high injection currents and uniformly emit over the whole emission area. We expect that CGH can be applied for the epitaxial growth of GaN on various substrates such as Si and MgO, which can be a great advantage in electrical and thermal properties of optical devices fabricated on them.
RESUMEN
Light extraction efficiency of GaN-based light emitting diodes were significantly enhanced using silver nanostructures incorporated in periodic micro-hole patterned multi quantum wells (MQWs). Our results show an enhancement of 60% in the wall-plug efficiency at an injection current of 100 mA when Ag nano-particles were deposited on side facet of MQWs passivated with SiO2. This improvement can be attributed to an increase in the spontaneous emission rate through resonance coupling between localized surface plasmons in Ag nano-particles and the excitons in MQWs.
RESUMEN
We investigate the mechanism of light extraction enhancement of a GaN-based light-emitting diode (LED) grown on patterned sapphire substrate (PSS), that has ZnO nanorod arrays (NRAs) fabricated on top of the device using the hydrothermal method. We found that the light output power of the LED with ZnO NRAs increases by approximately 30% compared to the conventional LED without damaging the electrical properties of the device. We argue that the gradual decrease of the effective refractive index, which is caused by the fabrication of ZnO NRAs, is the mechanism of the observed improvement. Our argument is confirmed by cross-sectional confocal scanning electroluminescence microscopy (CSEM) and the theoretical simulations, where we observed a distinct increase of the transmission at the interface between LED and air at the operation wavelength of the LED. In addition, the plane-view CSEM results indicate that ZnO NRAs, which were grown on the bare p-type GaN layer as an electrical safety margin area, also contribute to the enhanced light output power of the LED, which indicate further enhancement is manifested even in the optically ineffective sacrificial area.
RESUMEN
The dichotomy in DNA damage sensitivity of developing mouse oocytes during female germ line development is striking. Embryonic oocytes withstand hundreds of programmed DNA double-strand breaks (DSBs) required for meiotic recombination. Postnatal immature oocytes fail to tolerate even a few DSBs induced by gamma radiation treatment. TAp63α, a p53 family member, undergoes phosphorylation and mediates postnatal immature oocyte death following gamma radiation treatment, which is thought important for germ line quality maintenance. Whether prenatal meiotic oocytes tolerate DNA DSBs simply because they lack TAp63α expression is not clear. We found a significant number of oocytes in newborn mice initiate TAp63α expression and simultaneously carry meiotic DNA DSBs. However, the risk of premature death appears unlikely, because newborn oocytes strongly abate TAp63α phosphorylation induction and resist normally lethal doses of ionizing radiation damage. A calyculin A-sensitive Ser/Thr phosphatase activity downregulates TAp63α phosphorylation and ATM kinase mediates phosphorylation. Possible alterations in the relative balance of these counteracting activities during development may first temper TAp63α phosphorylation and death induction during meiotic DNA DSB repair and recombination, and afterward, implement germ line quality control in later stages. Insights into inherent DNA DSB resistance mechanisms in newborn oocytes may help prevent infertility in women in need of radiation or chemotherapy.
Asunto(s)
Roturas del ADN de Doble Cadena , Reparación del ADN/fisiología , Profase Meiótica I/genética , Oocitos/metabolismo , Fosfoproteínas/genética , Transactivadores/genética , Animales , Muerte Celular/fisiología , ADN/metabolismo , Femenino , Ratones , Fosforilación/fisiologíaRESUMEN
We report effect of the strain relaxation in InGaN/GaN multi-quantum well (MQW) structures grown on platinum nanocluster-coated sapphire substrate (PNSS) by metal organic chemical vapor deposition. The photoluminescence (PL) intensity of InGaN/GaN MQWs on PNSS was significantly enhanced compared to that of the InGaN/GaN MQWs on flat sapphire substrate due to the reduction of defect density and residual strain by self-assembled Pt nanoclusters. We confirmed the reduction of strain-induced piezoelectric field by the power dependence of the PL in InGaN/GaN MQWs on PNSS. Cathodoluminescence shows that a large bright area with overall strong peak intensity is attributed to the suppression of In inhomogeneity and strain relaxation in InGaN/GaN MQWs on PNSS. Based on these results, we suggest that the self-assembled Pt nanocluster can be applied to increase the quantum efficiency through improved crystal quality and internal strain relaxation in MQWs.
RESUMEN
We demonstrate that the use of silica nanospheres (SNs) with sizes close to the emission wavelength of light-emitting diodes (LEDs) can enhance the light output power and manipulate the far-field emission pattern. Near-ultraviolet (NUV)-LEDs grown on a patterned sapphire substrate embedded with 300 nm SNs show a three times higher light output power than that without SNs, when measured through the top side. For far-field emission measurements, the LEDs embedded with 300 nm SNs show the significant increase of front emission due to the improved crystal quality of epitaxial films as well as the increase of Mie scattering effect of SNs. These experimental results indicate the important role of the size of embedded SNs in enhancing the light output power for NUV-LEDs.
Asunto(s)
Lentes , Iluminación/instrumentación , Nanosferas/química , Semiconductores , Dióxido de Silicio/química , Resonancia por Plasmón de Superficie/instrumentación , Transferencia de Energía , Diseño de Equipo , Análisis de Falla de Equipo , Luz , Ensayo de Materiales , Nanosferas/ultraestructura , Tamaño de la Partícula , Refractometría/instrumentación , Dispersión de Radiación , Rayos UltravioletaRESUMEN
We developed a instrument consisting of an ultraviolet (UV) near-field scanning optical microscope (NSOM) combined with time-correlated single photon counting, which allows efficient observation of temporal dynamics of near-field photoluminescence (PL) down to the sub-wavelength scale. The developed time-resolved UV NSOM system showed a spatial resolution of 110 nm and a temporal resolution of 130 ps in the optical signal. The proposed microscope system was successfully demonstrated by characterizing the near-field PL lifetime of InGaN/GaN multiple quantum wells.
RESUMEN
This paper reports on the evaluation of the impact of introducing interlayers and postmetallization annealing on the graphene/p-GaN ohmic contact formation and performance of associated devices. Current-voltage characteristics of the graphene/p-GaN contacts with ultrathin Au, Ni, and NiO(x) interlayers were studied using transmission line model with circular contact geometry. Direct graphene/p-GaN interface was identified to be highly rectifying and postmetallization annealing improved the contact characteristics as a result of improved adhesion between the graphene and the p-GaN. Ohmic contact formation was realized when interlayer is introduced between the graphene and p-GaN followed by postmetallization annealing. Temperature-dependent I-V measurements revealed that the current transport was modified from thermionic field emission for the direct graphene/p-GaN contact to tunneling for the graphene/metal/p-GaN contacts. The tunneling mechanism results from the interfacial reactions that occur between the metal and p-GaN during the postmetallization annealing. InGaN/GaN light-emitting diodes with NiO(x)/graphene current spreading electrode offered a forward voltage of 3.16 V comparable to that of its Ni/Au counterpart, but ended up with relatively low light output power. X-ray photoelectron spectroscopy provided evidence for the occurrence of phase transformation in the graphene-encased NiO(x) during the postmetallization annealing. The observed low light output is therefore correlated to the phase change induced transmittance loss in the NiO(x)/graphene electrode. These findings provide new insights into the behavior of different interlayers under processing conditions that will be useful for the future development of opto-electronic devices with graphene-based electrodes.