Enantiospecific crystallisation behaviour of malic acid in mechanochemical reactions with vinpocetine.

We report an intriguing example of enantioselectivity in the formation of new multicomponent crystalline solid containing vinpocetine and malic acid. Several experimental data sets confirmed that the multicomponent system presents a clear enantiospecific crystallisation behaviour both in the solid-state and in solution: only the system consisting of vinpocetine and L-malic acid produces a free-flowing solid consisting of a new crystalline form, while the experiments with D-malic acid produced an amorphous and often deliquescent material. The new vinpocetine-L-malic system crystallizes in the monoclinic space group of P21 and in a 1:1 M ratio, where the two molecules are linked through intermolecular hydrogen bonds in the asymmetric unit. The vinpocetine-DL-malic system was partially crystalline (with also traces of unreacted vinpocetine) with diffraction peaks corresponding to those of vinpocetine-L-malic acid. Solid-state NMR experiments revealed strong ionic interactions in all the three systems. However, while vinpocetine-L-malic acid system was a pure and crystalline phase, in the other two systems the presence of unreacted vinpocetine was always detected. This resulted in a significant worsening of the dissolution profile with respect to vinpocetine-L-malic pure crystalline salt, whose dissolution kinetics appeared superior.

Interpreting permeability as a function of free drug fraction: The case studies of cyclodextrins and liposomes.

In order to solubilize poorly soluble active pharmaceutical ingredients, various strategies have been implemented over the years, including the use of nanocarriers, such as cyclodextrins and liposomes. However, improving a drug's apparent solubility does not always translate to enhanced bioavailability. This work aimed to investigate to which extent complexation with cyclodextrins and incorporation into liposomes influence drug in vitro permeability and to find a mechanistic description of the permeation process. For this purpose, we investigated hydroxypropyl-ß-cyclodextrin (HP-ß-CD) and phosphatidylcholine liposomes formulations of three chemically diverse compounds (atenolol, ketoprofen and hydrocortisone). We studied drug diffusion of the formulations by UV-localized spectroscopy and advanced data fitting to extract parameters such as diffusivity and bound-/free drug fractions. We then correlated this information with in vitro drug permeability obtained with the novel PermeaPadⓇ barrier. The results showed that increased concentration of HP-ß-CD leads to increased solubilization of the poorly soluble unionized ketoprofen, as well as hydrocortisone. However, this net increment of apparent solubility was not proportional to the increased flux measured. On the other hand, normalising the flux over the empirical free drug concentration, i.e., the free fraction, gave a meaningful absolute permeability coefficient. The results achieved for the liposomal formulation were consistent with the finding on cyclodextrins. In conclusion, we proved the adequacy and usefulness of our method for calculating free drug fractions in the examined enabling formulations, supporting the validity of the established drug diffusion/permeation theory that the unbounded drug fraction is the main driver for drug permeation across a membrane.

Praziquantel meets Niclosamide: A dual-drug Antiparasitic Cocrystal.

In this paper we report a successful example of combining drugs through cocrystallization. Specifically, the novel solid is formed by two anthelminthic drugs, namely praziquantel (PZQ) and niclosamide (NCM) in a 1:3 molar ratio, and it can be obtained through a sustainable one-step mechanochemical process in the presence of micromolar amounts of methanol. The novel solid phase crystallizes in the monoclinic space group of P21/c, showing one PZQ and three NCM molecules linked through homo- and heteromolecular hydrogen bonds in the asymmetric unit, as also attested by SSNMR and FT-IR results. A plate-like habitus is evident from scanning electron microscopy analysis with a melting point of 202.89 °C, which is intermediate to those of the parent compounds. The supramolecular interactions confer favorable properties to the cocrystal, preventing NCM transformation into the insoluble monohydrate both in the solid state and in aqueous solution. Remarkably, the PZQ - NCM cocrystal exhibits higher anthelmintic activity against in vitro S. mansoni models than corresponding physical mixture of the APIs. Finally, due to in vitro promising results, in vivo preliminary tests on mice were also performed through the administration of minicapsules size M.

Evaluating the role of protective creams on the cutaneous penetration of Ni nanoparticles.

There is an increase of application of Nickel in the form of nanoparticles (NiNPs) in several fields including modern metallurgy, bioengineering, and medicine. Such growth of the areas of application is actually accompanied with an increase of exposure to Nickel, thus an intensification of the negative effects, the most frequent being the allergic contact dermatitis. Indeed, due to their smaller size, and therefore their higher surface area, NiNPs can release more Ni ions compared to bulk material, that can penetrate and permeate through the skin. To reduce the Ni cutaneous penetration, barrier creams (BC) are applied on the skin surface. There is little information, however, on the efficiency of such commercial protective creams on decreasing Ni cutaneous penetration. For this reason, the objective of the current study was to investigate the protective role of one commercially available formulation for Ni (Nik-L-Block™ containing a chelating agent) and one moisturizing cream (Ceramol 311 basic cream without chelating agent), following exposure to NiNPs, using in vitro Franz cells, as well as the cytotoxicity of NiNPs in primary human dermal fibroblasts was studied. Our results demonstrated that although both tested formulations can decrease Ni accumulation in the skin (4.13 ± 1.74 µg/cm2 for Nik-L-Block™ and 7.14 ± 1.46 µg/cm2 for Ceramol 311 basic cream); there are significant differences between the two creams (p = 0.004). Based on the experimental evidence, we therefore conclude that the composition of such formulations has an imperative role for dermal uptake of Ni. Finally, NiNPs showed no cytotoxic effect on cultured human dermal fibroblasts after 24 and 72 h.

Co-Crystalline Solid Solution Affords a High-Soluble and Fast-Absorbing Form of Praziquantel.

Praziquantel (PZQ) is a chiral class-II drug, and it is used as a racemate for the treatment of schistosomiasis. The knowledge of several cocrystals with dicarboxylic acids has prompted the realization of solid solutions of PZQ with both enantiomers of malic acid and tartaric acid. Here, the solid form landscape of such a six-component system has been investigated. In the process, two new cocrystals were structural-characterized and three non-stoichiometric, mixed crystal forms identified and isolated. Thermal and solubility analysis indicates a fourfold solubility advantage for the newly prepared solid solutions over the pure drug. In addition, a pharmacokinetic study was conducted in rats, which involved innovative mini-capsules for the oral administration of the solid samples. The available data indicate that the faster dissolution rate of the solid solutions translates in faster absorption of the drug and helps maintain a constant steady-state concentration.

Modulating Thermal Properties of Polymers through Crystal Engineering.

Crystal engineering has exclusively focused on the development of advanced materials based on small organic molecules. We now demonstrate how the cocrystallization of a polymer yields a material with significantly enhanced thermal stability but equivalent mechanical flexibility. Isomorphous replacement of one of the cocrystal components enables the formation of solid solutions with melting points that can be readily fine-tuned over a usefully wide temperature range. The results of this study credibly extend the scope of crystal engineering and cocrystallization from small molecules to polymers.

Validation and testing of a new artificial biomimetic barrier for estimation of transdermal drug absorption.

Human skin remains the most reliable model for studying the transdermal permeation of active compounds. Due to the limited source, porcine skin has been used extensively for performing penetration tests. Performing penetration studies by using human and animal skin, however, would also involve a series of ethical issues and restrictions. For these reasons, new biomimetic artificial barriers are being developed as possible alternatives for transdermal testing. If appropriately optimized, such products can be cost-effective, easily standardized across laboratories, precisely controlled in specific experimental conditions, or even present additional properties compared to the human and animal skin models such as negligible variability between replicates. In this current work we use the skin mimicking barrier (SMB) for drug permeability tests. The aim was to evaluate the suitability of the new barrier for studying the percutaneous absorption of the lipophilic extract of the plant Zingiber officinale Roscoe in vitro and compare its permeability ability with the artificial membrane Permeapad® and porcine skin. Our results showed that the permeability values obtained through the SMB are comparable are comparable to those obtained by using the porcine skin, suggesting that the new barrier may be an acceptable in vitro model for conducting percutaneous penetration experiments.

Better and greener: sustainable pharmaceutical manufacturing technologies for highly bioavailable solid dosage forms.

In the last decades, Green Chemistry has been gaining widespread attention within the pharmaceutical field. It is thus very important to bring more sustainable approaches into the design and manufacture of effective oral drug delivery systems. This review focuses on spray congealing and mechanochemical activation, two technologies endorsing different principles of green chemistry, and at the same time, addressing some of the challenges related to the transformation of poorly water-soluble drugs in highly bioavailable solid dosage forms. We therefore present an overview of the basic principles, equipment, and application of these particle-engineering technologies, with specific attention to case studies carried out by the groups working in Italian Universities.

Dually Cross-Linked Core-Shell Structure Nanohydrogel with Redox-Responsive Degradability for Intracellular Delivery.

A redox-responsive nanocarrier is a promising strategy for the intracellular drug release because it protects the payload, prevents its undesirable leakage during extracellular transport, and favors site-specific drug delivery. In this study, we developed a novel redox responsive core-shell structure nanohydrogel prepared by a water in oil nanoemulsion method using two biocompatible synthetic polymers: vinyl sulfonated poly(N-(2-hydroxypropyl) methacrylamide mono/dilactate)-polyethylene glycol-poly(N-(2-hydroxypropyl) methacrylamide mono/dilactate) triblock copolymer, and thiolated hyaluronic acid. The influence on the nanohydrogel particle size and distribution of formulation parameters was investigated by a three-level full factorial design to optimize the preparation conditions. The surface and core-shell morphology of the nanohydrogel were observed by scanning electron microscope, transmission electron microscopy, and further confirmed by Fourier transform infrared spectroscopy and Raman spectroscopy from the standpoint of chemical composition. The redox-responsive biodegradability of the nanohydrogel in reducing environments was determined using glutathione as reducing agent. A nanohydrogel with particle size around 250 nm and polydispersity index around 0.1 is characterized by a thermosensitive shell which jellifies at body temperature and crosslinks at the interface of a redox-responsive hyaluronic acid core via the Michael addition reaction. The nanohydrogel showed good encapsulation efficiency for model macromolecules of different molecular weight (93% for cytochrome C, 47% for horseradish peroxidase, and 90% for bovine serum albumin), capacity to retain the peroxidase-like enzymatic activity (around 90%) of cytochrome C and horseradish peroxidase, and specific redox-responsive release behavior. Additionally, the nanohydrogel exhibited excellent cytocompatibility and internalization efficiency into macrophages. Therefore, the developed core-shell structure nanohydrogel can be considered a promising tool for the potential intracellular delivery of different pharmaceutical applications, including for cancer therapy.

Mechanochemical Synthesis and Physicochemical Characterization of Previously Unreported Praziquantel Solvates with 2-Pyrrolidone and Acetic Acid.

Two new solvates of the widely used anthelminthic Praziquantel (PZQ) were obtained through mechanochemical screening with different liquid additives. Specifically, 2-pyrrolidone and acetic acid gave solvates with 1:1 stoichiometry (PZQ-AA and PZQ-2P, respectively). A wide-ranging characterization of the new solid forms was carried out by means of powder X-ray diffraction, differential scanning calorimetry, FT-IR, solid-state NMR and biopharmaceutical analyses (solubility and intrinsic dissolution studies). Besides, the crystal structures of the two new solvates were solved from their Synchrotron-PXRD pattern: the solvates are isostructural, with equivalent triclinic packing. In both structures acetic acid and 2-pyrrolidone showed a strong interaction with the PZQ molecule via hydrogen bond. Even though previous studies have shown that PZQ is conformationally flexible, the same syn conformation as the PZQ Form A of the C=O groups of the piperazinone-cyclohexylcarbonyl segment is involved in these two new solid forms. In terms of biopharmaceutical properties, PZQ-AA and PZQ-2P exhibited water solubility and intrinsic dissolution rate much greater than those of anhydrous Form A.

Mechanochemical reactivity inhibited, prohibited and reversed by liquid additives: examples from crystal-form screens.

We demonstrate that liquid additives can exert inhibitive or prohibitive effects on the mechanochemical formation of multi-component molecular crystals, and report that certain additives unexpectedly prompt the dismantling of such solids into physical mixtures of their constituents. Computational methods were employed in an attempt to identify possible reasons for these previously unrecognised effects of liquid additives on mechanochemical transformations.

Echinacea angustifolia DC. Lipophilic Extract Patch for Skin Application: Preparation, In Vitro and In Vivo Studies.

Dodeca-2E,4E,8Z,10E/Z-tetraenoic isobutylamide (tetraene) is the main component of Echinacea angustifolia DC. lipophilic extract, the bioavailability and immunomodulatory effect after oral administration in soft gel capsules in healthy volunteers of which we have already demonstrated. In the present work, we assessed the transdermal administration as an alternative route of administration of such an alkamide. The first step, therefore, encompassed the preparation of a drug-in-adhesive patch with an area of 868 mm2 and containing a dose of 0.64 mg of tetraene. In vitro skin permeation studies in Franz-type diffusion chambers resulted in a tetraene flux of (103 ± 10) ng × cm-2 × h-1 with a very good linearity (r = 0.99). The relatively low lag time of just 13 min indicates low binding and the accumulation of tetraene in the skin. Finally, the patch was administered to six healthy volunteers, and the pharmacokinetic analysis was performed by nonlinear mixed effects modelling with soft gel oral capsules serving as the reference formulation. The in vivo results correlated well with the in vitro permeation and indicated an initial burst tetraene absorption from the patch that was in parallel with the zero-order kinetics of absorption. The rate of the latter process was in good agreement with the one estimated in vitro. The tetraene absorption rate was therefore slow and prolonged with time, resulting in a bioavailability of 39% relative to the soft gel capsules and a very flat plasma concentration profile.

Protective and regenerative effects of a novel medical device against esophageal mucosal damage using in vitro and ex vivo models.

Gastroesophageal reflux disease (GERD) is a common digestive disorder that causes esophagitis and injuries to the esophageal mucosa. GERD symptoms are recurrent during pregnancy and their treatment is focused on lifestyle changes and nonprescription medicines. The aim of this study was to characterize the mechanism of action of a new patented medical device, an oral formulation containing hyaluronic acid, rice extract, and amino acids dispersed in a bioadhesive polymer matrix, by assessing its protective effects in in vitro and ex vivo models of esophageal mucosa damage. Acidic bile salts and pepsin cocktail (BSC) added to CP-A and COLO-680 N esophagus cells were used as an in vitro GERD model to evaluate the binding capacities, anti-inflammatory effects and reparative properties of the investigational product (IP) in comparison to a viscous control. Our results showed that the IP prevents cell permeability and tight junction dysfunction induced by BSC. Furthermore, the IP was also able to down-regulate IL-6 and IL-8 mRNA expression induced by BSC stimulation and to promote tissue repair and wound healing. The results were confirmed by ex vivo experiments in excised rat esophagi through the quantification of Evans Blue permeability assay. These experiments provided evidence that the IP is able to bind to the human esophagus cells, preventing the damage caused by gastroesophageal reflux, showing potential anti-irritative, soothing, and reparative properties.

Molecular Crystal Forms of Antitubercular Ethionamide with Dicarboxylic Acids: Solid-State Properties and a Combined Structural and Spectroscopic Study.

We report on the preparation, characterization, and bioavailability properties of three new crystal forms of ethionamide, an antitubercular agent used in the treatment of drug-resistant tuberculosis. The new adducts were obtained by combining the active pharmaceutical ingredient with three dicarboxylic acids, namely glutaric, malonic and tartaric acid, in equimolar ratios. Crystal structures were obtained for all three adducts and were compared with two previously reported multicomponent systems of ethionamide with maleic and fumaric acid. The ethionamide-glutaric acid and the ethionamide-malonic acid adducts were thoroughly characterized by means of solid-state NMR (13C and 15N Cross-Polarization Magic Angle Spinning or CPMAS) to confirm the position of the carboxylic proton, and they were found to be a cocrystal and a salt, respectively; they were compared with two previously reported multicomponent systems of ethionamide with maleic and fumaric acid. Ethionamide-tartaric acid was found to be a rare example of kryptoracemic cocrystal. In vitro bioavailability enhancements up to a factor 3 compared to pure ethionamide were assessed for all obtained adducts.

Optimization of the Extraction from Spent Coffee Grounds Using the Desirability Approach.

The purpose of this work was the optimization of the extraction from spent coffee grounds, specifically 100% Arabica coffee blends, using a desirability approach. Spent coffees were recovered after the preparation of the espresso coffee under the typical conditions used in coffee bars with a professional machine. Spent coffee was subjected to different extraction procedures in water: by changing the extraction temperature (60, 80, or 100 °C) and the solvent extraction volume (10, 20, 30 mL for 1 gram of coffee) and by maintaining constant the extraction time (30 minutes). The ranges of the process parameters, as well as the solvent to be used, were established by running preliminary experiments not reported here. The variables of interest for the experimental screening design were the content of caffeine, trigonelline, and nicotinic acid, quantitatively determined from regression lines of standard solutions of known concentrations by a validated HPLC-VWD method. Since solvent extraction volumes and temperatures were revealed to be the most significant process variables, for the optimization of the extraction process, an approach based on Response Surface Methodology (RSM) was considered. In particular, a Box-Wilson Central Composite Design, commonly named central composite design (CCD), was used to find the optimal conditions of the extraction process. Moreover, the desirability approach was then applied to maximize the extraction efficiency by searching the optimal values (or at least the best compromise solution) for all three response variables simultaneously. Successively, the best extract, obtained in a volume of 20 mL of water at an extraction temperature of 80 °C, was analyzed for total phenol content (TPC) through the Folin-Ciocalteu assay, and the antioxidant capacities (AC) through the trolox equivalent (TE) antioxidant capacity (DPPH), ferric-ion reducing antioxidant parameter (FRAP), and radical cation scavenging activity and reducing power (ABTS). The TPC and the AC for spent coffee were high and comparable to the results obtained in previous similar studies. Then, the extract was evaluated by inductively coupled plasma mass spectrometry (ICP-MS), revealing that potassium was the most abundant element, followed by phosphorus, magnesium, calcium, sodium, and sulfur, while very low content in heavy metals was observed. Preliminary in vitro assays in keratinocyte HaCaT cells were carried out to assess the safety, in terms of cytotoxicity of spent coffee, and results showed that cell viability depends on the extract concentration: cell viability is unmodified up to a concentration of 0.3 mg/mL, over which it becomes cytotoxic for the cells. Spent coffee extract at 0.03 and 0.3 mg/mL showed the ability to reduce intracellular reactive oxygen species formation induced by hydrogen peroxide in HaCaT cells, suggesting its antioxidant activity at intracellular levels.

Mechanochemical Formation of Racemic Praziquantel Hemihydrate with Improved Biopharmaceutical Properties.

Praziquantel (PZQ) is the first-line drug used against schistosomiasis, one of the most common parasitic diseases in the world. A series of crystalline structures including two new polymorphs of the pure drug and a series of cocrystals of PZQ have been discovered and deposited in the Cambridge Structural Database (CSD). This work adds to the list of multicomponent forms of PZQ a relevant example of a racemic hemihydrate (PZQ-HH), obtainable from commercial PZQ (polymorphic Form A) through mechanochemistry. Noteworthy, the formation of the new hemihydrate strongly depends on the initial polymorphic form of PZQ and on the experimental conditions used. The new PZQ-HH has been fully characterized by means of HPLC, Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), Hot-Stage Microscopy (SEM), Powder X-Ray Diffraction (PXRD), Scanning Electron Microscopy (SEM), FT-IR, polarimetry, solid-state NMR (SS-NMR), solubility and intrinsic dissolution rate (IDR), and in vitro tests on Schistosoma mansoni adults. The crystal structure was solved from the powder X-ray diffraction pattern and validated by periodic-DFT calculations. The new bioactive hemihydrate was physically stable for three months and showed peculiar biopharmaceutical features including enhanced solubility and a double intrinsic dissolution rate in water in comparison to the commercially available PZQ Form A.

Dissolution of an ensemble of differently shaped poly-dispersed drug particles undergoing solubility reduction: mathematical modelling.

The aim of this theoretical paper is to develop a mathematical model for describing the dissolution process, in a finite liquid environment, of an ensemble of poly-dispersed drug particles, in form of sphere, cylinder and parallelepiped that can undergo solubility reduction due to phase transition induced by dissolution. The main result of this work consists in its simplicity as, whatever the particular particles size distribution, only two ordinary differential equations are needed to describe the dissolution process. This, in turn, reflects in a very powerful and agile theoretical tool that can be easily implemented in electronic sheets, a widespread tool among the research community. Another model advantage lies on the possibility of determining its parameters by means of common independent techniques thus enabling the evaluation of the importance of solid wettability on the dissolution process.

Untargeted UPLC-MS metabolomics reveals multiple changes of urine composition in healthy adult volunteers after consumption of curcuma longa L. extract.

Curcuma longa L. is used as food supplement to prevent diseases, although limited studies have been performed on healthy subjects up to now. In the present work, an untargeted UPLC-MS metabolomics approach was applied to study the changes of 24-hours urinary composition on healthy volunteers due to a 28-days daily consumption of a dried C. longa extract containing a standardized amount of curcuminoids. Changes in the excretion of different metabolites were observed after supplementation. Curcumin and two metabolic derivatives (hexahydrocurcumin and dihydrocurcumin) were detected in urine, indicating the absorption of the main curcuminoid from the extract and its further metabolism by liver and gut microbiota. For the first time ar-turmerone, the main apolar constituent of curcuma, was detected in urine in intact form, and its presence was confirmed by a targeted GC-MS analysis. The increase of tetranor-PGJM and tetranor-PGDM, two prostaglandin-D2 metabolites, was observed, being related to the anti-inflammatory effect exerted by curcuma. The variation of the amounts of HPAG, PAG, proline-betaine and hydroxyphenyllactic acid indicate that the supplementation induced changes to the activity of gut microbiota. Finally, the reduced excretion of niacin metabolites (nicotinuric acid, trigonelline and 2PY) and medium- and short-chain acylcarnitines suggests that curcuma could induce the mitochondrial ß-oxidation of fatty acids for energy production in healthy subjects. Overall, the results indicate that a prolonged daily consumption of a dried curcuma extract exerts multiple effects on healthy subjects, furthermore they show the opportunity offered by untargeted metabolomics for the study of the bioactivity of natural extracts in healthy human volunteers.

Exploring mechanochemical parameters using a DoE approach: Crystal structure solution from synchrotron XRPD and characterization of a new praziquantel polymorph.

A rotated Doehlert matrix was utilized to explore the experimental design space around the milling parameters of Praziquantel (PZQ) polymorph B formation in terms of frequency and milling time. Three experimental responses were evaluated on the resulting ground samples: two quantitative responses, i.e. median particle size by Laser Light scattering (LLS) and drug recovery by HPLC, and one qualitative dependent variable, i.e. the obtained PZQ crystalline form, characterized through X-Ray Powder Diffraction (XRPD) and confirmed by Differential Scanning Calorimetry (DSC) and Thermogravimetric analysis (TGA). Temperature inside the jars was kept under constant control during the milling process by using temperature sensor equipped jars (thermojars), thus allowing evaluation of the obtained solid states at each experimental point, considering the specific temperature of the process. This explorative analysis led to the finding of a novel PZQ polymorph, named "Form C", produced without degradation, then fully characterized, including by means of Synchrotron XRPD, Polarimetric, FT-IR, SS-NMR, ESEM and saturation solubility. Crystal structure was solved from XRPD data and its geometry was optimized by DFT calculations (CASTEP). Finally, Form C and Form A activity against adult schistosoma mansoni were compared through in vitro testing, and Form C's physical stability checked. The new polymorph, crystallizing in space group I2/c, physically stable for approximately 2 months, showed a m.p. of 106.84 °C and displayed excellent biopharmaceutical properties (water solubility of 382.69±9.26 mg/l), while preserving excellent activity levels against adult schistosoma mansoni.

Combined extracts of Echinacea angustifolia DC. and Zingiber officinale Roscoe in softgel capsules: Pharmacokinetics and immunomodulatory effects assessed by gene expression profiling.

BACKGROUND AND OBJECTIVE: Echinacea angustifolia DC. and Zingiber officinale Roscoe are two natural products with documented immunomodulatory activity, both able to modulate the expression of important immune-related genes. Thus, their use in combination seems to be particularly promising. In this context, we have considered the oral supplementation of a highly standardized lipophilic extract combining both above-mentioned phytocomplexes, formulated in attractive softgel capsules, with two objectives: on the one hand to study oral pharmacokinetic of main active extracts' components and on the other hand to examine the immunomodulation and anti-inflammatory properties by gene expression profiling. METHODS: Softgel capsules containing a combination of E. angustifolia DC. and Z. officinale Roscoe (5 mg and 25 mg, respectively) were given by oral administration to 10 healthy volunteers. The plasma concentrations of dodeca-2E,4E,8Z,10E/Z-tetraenoic isobutylamide (tetraene) for E. angustifolia DC., 6-gingerol and 6-shogaol (free and glucuronide) for Z. officinale Roscoe were determined by LC-MS analysis, and the pharmacokinetic analysis was performed. To understand the functional mechanisms responsible for the documented health benefits, we also examined the overall transcriptional remodeling induced in the peripheral blood mononuclear cells and performed an integrative functional analysis on the generated gene expression. RESULTS: All bioactive components were absorbed very rapidly, and their tmax were detected in plasma from 30 min to 1.40 h. The peak concentrations of tetraene, 6-gingerol, 6-shogaol and their glucuronide metabolites were 14.74, 5.66, 9.25, 29.2 and 22.24 ng/ml, respectively. Integrated analysis performed on the generated gene expression data highlighted immunomodulatory and anti-inflammatory effects similar to those exerted by hydrocortisone. CONCLUSION: These data demonstrated that the bioactive ingredients are highly and rapidly absorbed from softgel capsules containing the combination of the above-mentioned lipophilic extracts, providing evidence to support their immunomodulatory and anti-inflammatory properties. These data also help in defining the mechanistic pathways underlying the health benefits of these plant-derived bioactive compounds.