Impact of air pollution and heavy metal exposure on sperm quality: A clinical prospective research study.

Exposure to air pollution poses significant risks to human health, including detrimental effects on the reproductive system, affecting both men and women. Our prospective clinical study aimed to assess the impact of prolonged air pollution exposure on sperm quality in male patients attending a fertility clinic. The current study was conducted at Sri Narayani Hospital and Research Centre in Vellore, Tamil Nadu, India, and the study examined sperm samples obtained from individuals with extended exposure to air pollution. Microscopic analysis, including scanning electron microscopy (SEM), was conducted to evaluate sperm morphology. At the same time, atomic absorption spectroscopy (AAS) determined the presence of heavy metals, including Zinc (Zn), Magnesium (Mg), Lead (Pb) and Cadmium (Cd), known to affect sperm production. Our findings revealed that long-term exposure to air pollution adversely affects sperm quality, manifesting in alterations during the spermatogenesis cycle, morphological abnormalities observed through SEM, and impaired sperm motility. Additionally, epidemiological evidence suggests that elevated levels of cadmium and lead in the environment induce oxidative stress, leading to sperm DNA damage and reduced sperm concentrations. These results underscore the urgent need for environmental interventions to mitigate air pollution and protect reproductive health.

Data on vermicompost effect on the uptake of cadmium from soil by the roots of radish (Raphanus sativus).

Cadmium is a common environmental heavy metal that is very toxic and carcinogenic for human and other flora and fauna. Therefore, this study is aimed to evaluate the fisibility of vermicompost fertilizer for cadmium uptake from soil by the root of radish (Raphanus sativus). For the purpose of the study, four different ratios of one case control, 1 per 1, 1 per 4, 2 per 4, 3 per 4 vermicompost fertilizer per soil with 0, 50000 and 100000 µg/L cadmium concentrations was evaluated. Cadmium in the samples was measured using an Atomic Absorption Spectroscopy (AAS). The results showed that the minimum uptake of cadmium by the plant was observed for 3 per 4 ratio of fertilizer per soil. In addition, results revealed that highest growth rate of Raphanus sativus roots occurred in maximum ratio of fertilizer per soil usage (3 per 4). This study showed that vermicompost as a organic fertilizer has a good ability to adsorb cadmium metal from soil. Therfore, vermicompost application can be considered as an inexpensive natural adsorbent in arable land contaminated with cadmium.•Heavy metals are very toxic and carcinogenic to human and animals.•Adding organic fertilizer to the soil increases the absorption of heavy metal (cadmium) in the soil and prevents it from entering the food chain.•The relationship between the concentration of cadmium absorbed by the tuber of radish plant and the percentage of vermicompost added to the soil is presented.

Evidence of direct interaction between cisplatin and the caspase-cleaved prostate apoptosis response-4 tumor suppressor.

Prostate apoptosis response-4 (Par-4) tumor suppressor protein has gained attention as a potential therapeutic target owing to its unique ability to selectively induce apoptosis in cancer cells, sensitize them to chemotherapy and radiotherapy, and mitigate drug resistance. It has recently been reported that Par-4 interacts synergistically with cisplatin, a widely used anticancer drug. However, the mechanistic details underlying this relationship remain elusive. In this investigation, we employed an array of biophysical techniques, including circular dichroism spectroscopy, dynamic light scattering, and UV-vis absorption spectroscopy, to characterize the interaction between the active caspase-cleaved Par-4 (cl-Par-4) fragment and cisplatin. Additionally, elemental analysis was conducted to quantitatively assess the binding of cisplatin to the protein, utilizing inductively coupled plasma-optical emission spectroscopy and atomic absorption spectroscopy. Our findings provide evidence of direct interaction between cl-Par-4 and cisplatin, and reveal a binding stoichiometry of 1:1. This result provides insights that could be useful in enhancing the efficacy of cisplatin-based and tumor suppressor-based cancer therapies.

Sample Preparation and Analytical Techniques in the Determination of Trace Elements in Food: A Review.

Every human being needs around 20 essential elements to maintain proper physiological processes. However, trace elements are classified as beneficial, essential, or toxic for living organisms. Some trace elements are considered essential elements for the human body in adequate quantities (dietary reference intakes, DRIs), while others have undetermined biological functions and are considered undesirable substances or contaminants. Pollution with trace elements is becoming a great concern since they can affect biological functions or accumulate in organs, causing adverse effects and illnesses such as cancer. These pollutants are being discarded in our soils, waters, and the food supply chain due to several anthropogenic factors. This review mainly aims to provide a clear overview of the commonly used methods and techniques in the trace element analysis of food from sample preparations, namely, ashing techniques, separation/extraction methods, and analytical techniques. Ashing is the first step in trace element analysis. Dry ashing or wet digestion using strong acids at high pressure in closed vessels are used to eliminate the organic matter. Separation and pre-concentration of elements is usually needed before proceeding with the analytical techniques to eliminate the interferences and ameliorate the detection limits.

Old leaves accumulate more heavy metals than other parts of the desert shrub Calotropis procera at a traffic-polluted site as assessed by two analytical techniques.

Calotropis procera is a perennial big shrub that has the potential to accumulate high concentrations of heavy metals. Metal sequestration in old organs has been considered as a mechanism for plant survival in polluted soils. The aim of the present study was to assess the role of the old leaves as a sink for HMs accumulation in C. procera. Two instruments were used: atomic absorption spectroscopy (AAS) and X-ray fluorescence (XRF) microscopy. Soil and plant samples were collected from around one of the worst congested traffic areas in the United Arab Emirates (UAE). Samples from roots, stem, and green and old leaves were prepared and analyzed by both instruments. Calotropis procera was able to concentrate Fe, Mn, Sr, and Zn in the roots, but their translocation to stem and green leaves was low. Old leaves had greater ability to accumulate significantly higher concentrations of different metals, especially Fe and Sr, than other parts of the plants, indicating that C. procera uses these metabolically less-active leaves as sinks for heavy metals. Fe and Sr attained higher bioconcentration and accumulation values, compared to Zn and Mn. There were significant positive correlations between XRF and AAS for all elements in the different organs.

Equilibrium study of dried orange peel for its efficiency in removal of cupric ions from water.

Excess of copper ion (>2 mg/L) in water is toxic to human beings and the ecosystem. Various water treatment technologies for copper remediation have been investigated in the past. Along with industrial effluents, Bordeaux mixture is also a noteworthy copper contamination source in the agricultural ecosystem. In our study, the biosorbent efficiency of dried orange peel was investigated through an environment-friendly process for the removal of cupric ions. Effects of pH, adsorbate concentration, adsorbent dosage, and temperature for the removal of Cu (II) were studied. Slightly acidic environment (pH = 6) was found to be optimum for removal of copper. The equilibrium data were well fitted with the Langmuir and Freundlich isotherms. The surface morphology of the adsorbent was studied using scanning electron microscope. Crystalline nonhomogenous surface was observed after copper adsorption. Desorption study indicated that 0.1N H2SO4 is the best eluent for the removal of adsorbed copper from the powdered dried orange peel.

Microalgal consortia differentially modulate progressive adsorption of hexavalent chromium.

A set of experiments was conducted to provide significant insights of micro-algal consortia regarding chromium adsorption. Four monocultures; Scenedesmus dimorphus, Chlorella sp., Oscillatoria sp., and Lyngbya sp., and their synthetic consortia were evaluated initially for chromium bio-adsorption at four different regimes of hexavalent chromium i.e. 0.5, 1.0, 3.0 and 5.0 ppm. Based on findings, only 1.0 and 5.0 ppm were considered for future experiments. Consequently, three different types of monoculture and consortia cells namely; live cells, heat-killed cells, and pre-treated cells were prepared to enhance their adsorption potential. Maximal adsorption of 112% was obtained at the dose of 1.0 ppm with 0.1% SDS pre-treated consortia cells over live consortia cells. In support, atomic absorption spectroscopy, laser induced breakdown spectroscopy, pulse amplitude modulated chlorophyll fluorescence, and scanning electron microscopy were performed to assess the structural and functional changes within consortia and their utilization in mitigation of elevated chromium levels.

Analysis of bakery products by laser-induced breakdown spectroscopy.

In this study, we focused on the detection of Na in bakery products by using laser-induced breakdown spectroscopy (LIBS) as a quick and simple method. LIBS experiments were performed to examine the Na at 589 nm to quantify NaCl. A series of standard bread sample pellets containing various concentrations of NaCl (0.025-3.5%) were used to construct the calibration curves and to determine the detection limits of the measurements. Calibration graphs were drawn to indicate functions of NaCl and Na concentrations, which showed good linearity in the range of 0.025-3.5% NaCl and 0.01-1.4% Na concentrations with correlation coefficients (R(2)) values greater than 0.98 and 0.96. The obtained detection limits for NaCl and Na were 175 and 69 ppm, respectively. Performed experimental studies showed that LIBS is a convenient method for commercial bakery products to quantify NaCl concentrations as a rapid and in situ technique.