An Exploration of Dissolution Tests for Inhalation Aerosols.

This study aimed to establish a feasible dissolution method for inhalation aerosols. A method of collecting fine particles was investigated to capture aerosol particles less than 4 µm in diameter for dissolution tests. This dose collection method enabled the aerosol particles to be uniformly distributed on the glass fiber filter, thus considerably reducing particle agglomeration. Budesonide was used as a model drug. The aerodynamic particle size distribution (APSD) of the meter-dose inhaler (MDI) was compared by replacing actuators with different orifice sizes. Dissolution tests were conducted on fine particle doses collected using various actuators, and the dissolution profiles were modeled. The fine particle dose decreased with an increasing orifice size of the actuator. Actuators with different orifice sizes would affect the dissolution behavior of inhaled drugs. This finding was supported by similarity factor f2 analysis, suggesting the dissolution method has a discriminative capacity. The results of various model fits showed that the dissolution profiles produced by the different actuators could be fitted well using the Weibull mathematical model. The method employed in this study could offer a potential avenue for exploring the relationship between the orifice size of the actuator and the dissolution behavior of inhaled corticosteroids. This dissolution method was simple, reproducible, and suitable for determining the dissolution of inhalation aerosols.

Insights on Nefecon®, a Targeted-Release Formulation of Budesonide and Its Selective Immunomodulatory Effects in Patients with IgA Nephropathy.

Immunoglobulin A nephropathy (IgAN) is a chronic, immune-mediated kidney disease characterized by the deposition of galactose-deficient immunoglobulin A1 (Gd-IgA1) in the kidneys. Excess Gd-IgA1 production in patients with IgAN is located within the mucosa-associated lymphoid tissue, particularly within the lamina propria in the distal ileum. Nefecon® is a targeted-release formulation of the corticosteroid budesonide, which became the first treatment approved by the US Food and Drug Administration (FDA; brand name, TARPEYO®) and European Medicines Agency (EMA; KINPEYGO®) for patients with primary IgAN at risk of rapid disease progression, after demonstrating clinically significant reduction of proteinuria in an interim analysis of the Phase III NefIgArd trial. After showing a significant reduction in estimated glomerular filtration rate decline in the full 2-year analysis of the trial, Nefecon was granted full approval by the FDA to reduce the loss of kidney function. Nefecon was specifically designed to deliver budesonide to the distal ileum, selectively targeting excess Gd-IgA1 production in the gut-associated lymphoid tissue. In this review, we describe the properties of Nefecon and the evidence to date that confirms its localized treatment effect. We also present unpublished evidence from Phase I trials investigating the pharmacokinetics and cortisol suppression effects of Nefecon in healthy participants. These studies demonstrated that Nefecon has a distinct pharmacokinetic profile from other budesonide products, allowing for targeted, localized action in the distal ileum. When considered alongside existing clinical trial data showing the effect of Nefecon on gut-associated biomarkers, available evidence indicates that Nefecon has a selective immunomodulatory mechanism of action and a direct disease-modifying effect in patients with IgAN, while having low systemic exposure and adverse effects.

From self-Assembly to healing: Engineering ultra-Small peptides into supramolecular hydrogels for controlled drug release.

The aim of this study was the evaluation of suitability of novel mucoadhesive hydrogel platforms for the delivery of therapeutics useful for the management of disorders related to the gastrointestinal tract (GI). At this purpose, here we describe the preparation, the physicochemical characterization and drug delivery behaviour of novel hydrogels, based on self-assembling lipopeptides (MPD02-09), obtained by covalently conjugating lauric acid (LA) to SNA's peptide derivatives gotten by variously combining D- and L- amino acid residues. LA conjugation was aimed at improving the stability of the precursor peptides, obtaining amphiphilic structures, and triggering the hydrogels formation through the self-assembling. Budesonide (BUD), an anti-inflammatory drug, was selected as model because of its use in the treatment in GI disorders. Preliminary studies were performed to correlate the chemical structure of the conjugates with the key physicochemical properties of the materials for drug delivery. Two lipopeptides, MPD03 and MPD08, were found to form hydrogels (MPD03h and MPD08h, respectively) with characteristics suitable for drug delivery. These materials showed mucoadhesiveness of about 60 %. In vitro studies carried out with BUD loaded hydrogels showed about 70 % drug release within 6 h. Wound healing assessed in Caco-2 and HaCaT cells, showed reduction of cell-free area to values lower than 10 %. Taking together these results MPD03h and MPD08h have been shown to be excellent candidates for BUD delivery.

Amorphous stabilization of BCS II drugs using mesoporous silica.

This study aimed to investigate the amorphous stabilization of BCS Class II drugs using mesoporous silica as a carrier to produce amorphous solid dispersions. Ibuprofen, fenofibrate, and budesonide were selected as model drugs to evaluate the impact of molecular weight and partition coefficient on the solid state of drug-loaded mesoporous silica (MS) particles. The model drugs were loaded into three grades of MS, SYLYSIA SY730, SYLYSIA SY430, and SYLYSIA SY350, with pore diameters of 2.5 nm, 17 nm, and 21 nm, respectively, at 1:1, 2:1, and 3:1, carrier to drug ratios, and three different loading concentrations using solvent immersion and spray drying techniques. Differential scanning calorimetry (DSC) thermograms of SY430 and SY350 samples exhibited melting point depressions indicating constricted crystallization inside the pores, whereas SY730 samples with melting points matching the pure API may be a result of surface crystallization. Powder x-ray diffraction (PXRD) diffractograms showed all crystalline samples matched the diffraction patterns of the pure API indicating no polymorphic transitions and all 3:1 ratio samples exhibited amorphous halo profiles. Response surface regression analysis and Classification and Regression Tree (CART) analysis suggest carrier to drug ratios, followed by molecular weight, have the most significant impact on the crystallinity of a drug loaded into MS particles.

Integration of mucus and its impact within in vitro setups for inhaled drugs and formulations: Identifying the limits of simple vs. complex methodologies when studying drug dissolution and permeability.

Traditionally, developing inhaled drug formulations relied on trial and error, yet recent technological advancements have deepened the understanding of 'inhalation biopharmaceutics' i.e. the processes that occur to influence the rate and extent of drug exposure in the lungs. This knowledge has led to the development of new in vitro models that predict the in vivo behavior of drugs, facilitating the enhancement of existing formulation and the development of novel ones. Our prior research examined how simulated lung fluid (SLF) affects the solubility of inhaled drugs. Building on this, we aimed to explore drug dissolution and permeability in lung mucosa models containing mucus. Thus, the permeation of four active pharmaceutical ingredients (APIs), salbutamol sulphate (SS), tiotropium bromide (TioBr), formoterol fumarate (FF) and budesonide (BUD), was assayed in porcine mucus covered Calu-3 cell layers, cultivated at an air liquid interface (ALI) or submerged in a liquid covered (LC) culture system. Further analysis on BUD and FF involved their transport in a mucus-covered PAMPA system. Finally, their dissolution post-aerosolization from Symbicort® was compared using 'simple' Transwell and complex DissolvIt® apparatuses, alone or in presence of porcine mucus or polymer-lipid mucus simulant. The presence of porcine mucus impacted both permeability and dissolution of inhaled drugs. For instance, permeability of SS was reduced by a factor of ten in the Calu-3 ALI model while the permeability of BUD was reduced by factor of two in LC and ALI setups. The comparison of dissolution methodologies indicated that drug dissolution performance was highly dependent on the setup, observing decreased release efficiency and higher variability in Transwell system compared to DissolvIt®. Overall, results demonstrate that relatively simple methodologies can be used to discriminate between formulations in early phase drug product development. However, for more advanced stages complex methods are required. Crucially, it was clear that the impact of mucus and selection of its composition in in vitro testing of dissolution and permeability should not be neglected when developing drugs and formulations intended for inhalation.

Influence of particle diameter on aerosolization performance and release of budesonide loaded mesoporous silica particles.

The potential of micron-sized amorphous mesoporous silica particles as a novel controlled release drug delivery system for pulmonary administration has been investigated. Mesoporous silica formulations were demonstrated to provide a narrower particle size distribution and (spherical) shape uniformity compared to commercial micronized formulations, which is critical for repeatable and targeted aerosol delivery to the lungs. The release profiles of a well-known pulmonary drug loaded into mesoporous particles of different mean particle diameters (2.4, 3.9 and 6.3 µm) were analysed after aerosolization in a modified Andersen Cascade Impactor. Systematic control of the release rate of drug loaded into the particles was demonstrated in simulated lung fluid by variation of the mean particle diameter, as well as an enhanced release compared to a commercial micronized formulation. The mesoporous silica formulations all demonstrated an increased release rate of the loaded drug and moreover, under aerosolization from a commercial, low-cost dry powder inhaler (DPI) device, the formulations showed excellent performance, with low retainment and commercially viable fine particle fractions (FPFs). In addition, the measured median mass aerodynamic diameter (MMAD) of the different formulations (2.8, 4.1 and 6.2 µm) was shown to be tuneable with particle size, which can be helpful for targeting different regions in the lung. Together these results demonstrate that mesoporous silica formulations offer a promising novel alternative to current dry powder formulations for pulmonary drug delivery.

The Role of Nanoparticle Morphology on Enhancing Delivery of Budesonide for Treatment of Inflammatory Bowel Disease.

Inflammatory bowel disease (IBD) is a chronic and recurrent inflammatory disease that affects the gastrointestinal tract. The major hurdles impeding IBD treatment are the low targeting efficiency and short retention time of drugs in IBD sites. Nanoparticles with specific shapes have demonstrated the ability to improve mucus retention and cellular uptake. Herein, mesoporous silica nanoparticles (MSNs) with various morphologies were used to deliver budesonide (BUD) for the treatment of IBD. The therapeutic efficacy is strongly dependent on their shapes. The system comprises different shapes of MSNs as carriers for budesonide (BUD), along with Eudragit S100 as the enteric release shell. The encapsulation of Eudragit S100 not only improved the stability of MSNs-BUD in the gastrointestinal tract but also conferred pH-responsive drug release properties. Then, MSNs efficiently deliver BUD to the colon site, and the special shape of MSNs plays a critical role in enhancing their permeability and retention in the mucus layer. Among them, dendritic MSNs (MSND) effectively reduced myeloperoxidase (MPO) activity and levels of inflammatory cytokines in the colon due to long retention time and rapid release in IBD sites, thereby enhancing the therapeutic efficacy against colitis. Given the special shapes of MSNs and pH-responsivity of Eudragit S100, BUD loaded in the voids of MSND (E@MSNs-BUD) could penetrate the mucous layer and be accurately delivered to the colon with minor side effects. This system is expected to complement current treatment strategies for the IBD.

Enteric-Coated Capsules Providing Reliable Site-Specific Drug Delivery to the Distal Ileum.

Nefecon, a targeted-release capsule formulation of budesonide approved for the reduction of proteinuria in adults with primary immunoglobulin A nephropathy, targets overproduction of galactose-deficient immunoglobulin A type 1 in the Peyer's patches at the gut mucosal level. To investigate whether the commercial formulation of Nefecon capsules reliably releases budesonide to the distal ileum, a human study was conducted with test capsules reproducing the delayed-release function of Nefecon capsules. Caffeine was included in the test capsules as a marker for capsule opening in the gut since it appears rapidly in saliva after release from orally administered dosage forms. Magnetic resonance imaging with black iron oxide was used to determine the capsule's position in the gut at the time caffeine was first measured in saliva and additionally to directly visualize dispersion of the capsule contents in the gut. In vitro dissolution results confirmed that the test capsules had the same delayed-release characteristics as Nefecon capsules. In 10 of 12 human volunteers, the capsule was demonstrated to open in the distal ileum; in the other two subjects, it opened just past the ileocecal junction. These results compared favorably with the high degree of variability seen in other published imaging studies of delayed-release formulations targeting the gut. The test capsules were shown to reliably deliver their contents to the distal ileum, the region with the highest concentration of Peyer's patches.

Effect of drug load on the aerosolisation propensity of binary adhesive mixtures for inhalation.

The aim of this study was to investigate how the propensity for aerosolisation in binary adhesive mixtures was affected by the drug load, and to determine whether these findings could be linked to different blend states. Binary blends of two different lactose carriers, each with varying size and morphology, were prepared together with budesonide. In vitro aerosolisation studies were conducted at four different pressure drops, ranging from 0.5 to 4 kPa, utilising a Next Generation Impactor. Several dispersion parameters were derived from the relationship between the quantity of dispersed API and the pressure drop. The evolution of the parameters with drug load was complex, especially at low drug loads. While similar responses were observed for both carriers, the range of drug load that could be used varied significantly. The choice of carrier not only influenced the capacity for drug loading but also affected the spatial distribution of the API within the mixture, which, in turn, affected its aerosolisation propensity. Thus, the drug dispersion process could be linked to different configurations of the lactose carrier and budesonide in the blends, i.e. blend states. In conclusion, the study suggests that the concept of blend states can provide an explanation for the complex dispersion process observed in adhesive blends.

Poly(malic acid)-budesonide nanoconjugates embedded in microparticles for lung administration.

To improve the therapeutic activity of inhaled glucocorticoids and reduce potential side effects, we designed a formulation combining the advantages of nanoparticles, which have an enhanced uptake by alveolar cells, allow targeted delivery and sustained drug release, as well as limited drug systemic passage, with those of microparticles, which display good alveolar deposition. Herein, a polymer-drug conjugate, poly(malic acid)-budesonide (PMAB), was first synthesized with either 11, 20, 33, or 43 mol% budesonide (drug:polymer from 1:8 to 3:4), the drug creating hydrophobic domains. The obtained conjugates self-assemble into nanoconjugates in water, yielding excellent drug loading of up to 73 wt%, with 80-100 nm diameters. In vitro assays showed that budesonide could be steadily released from the nanoconjugates, and the anti-inflammatory activity was preserved, as evidenced by reduced cytokine production in LPS-activated RAW 264.7 macrophages. Nanoconjugates were then embedded into microparticles through spray-drying with L-leucine, forming nano-embedded microparticles (NEMs). NEMs were produced with an aerodynamic diameter close to 1 µm and a density below 0.1 g.cm-3, indicative of a high alveolar deposition. NEMs spray-dried with the less hydrophobic nanoconjugates, PMAB 1:4, were readily dissolved in simulated lung fluid and were chosen for in vivo experiments to study pharmacokinetics in healthy rats. As it was released in vivo from NEMs, sustained distribution of budesonide was obtained for 48 h in lung tissue, cells, and lining fluid. With high loading rates, modulable release kinetics, and low cytotoxicity, these nanoconjugates delivered by NEMs are promising for the more efficient treatment of pulmonary inflammatory diseases.

Budesonide delayed-release capsules to reduce proteinuria in adults with primary immunoglobulin A nephropathy.

INTRODUCTION: Immunoglobulin A nephropathy (IgAN) is characterized by mesangial deposition of immune complexes containing galactose-deficient IgA1 (Gd-IgA1). This Gd-IgA1 is believed to originate from mucosally sited B cells, which are abundant in the Peyer's patches-rich distal ileum. Nefecon is a targeted-release form of budesonide developed to act in the distal ileum, thereby exerting a direct action on the mucosal tissue implicated in the pathogenesis of the disease. AREAS COVERED: This review discusses IgAN pathophysiology and provides an overview of the current therapeutic landscape, focusing on Nefecon, the first drug to receive accelerated US approval and conditional EU approval for the treatment of patients with IgAN at risk of rapid disease progression. EXPERT OPINION: Nefecon trial data thus far have demonstrated a promising efficacy profile, with a predictable pattern of adverse events. Treatment with Nefecon for 9 months reduces proteinuria substantially (Part A of the Phase 3 trial and the Phase 2b trial). A nearly complete prevention of deterioration of renal function has been observed at 12 months in patients at greatest risk of rapid disease progression. Long-term data from Part B of the Phase 3 study will provide 24-month data, furthering understanding of the durability of the 9-month treatment course.

HPLC-UV/VIS for Determination of Ipratropium Bromide Mixed with Salbuterol, Beclomethasone Propionate and Budesonide using Dual Wavelength-Detection Method.

BACKGROUND: Inhalation preparation involves liquid or solid raw materials for delivering to lungs as aerosol or vapor. The liquid preparation for nebulizer is effective for convenient use and patient compliance and it has been extensively used in the treatment of clinical lung diseases. Clinical staff often mixes the compound ipratropium bromide with beclomethasone propionate and budesonide inhaler but reference values of inhalants for clinical use need to be established for simplifying the operation procedure. The high-performance liquid chromatography (HPLC) method of compound ipratropium bromide solution, beclomethasone propionate suspension and budesonide suspension after mixed atomization was studied. METHODS: The specificity, linearity, recovery (accuracy), precision and stability of compound ipratropium bromide, beclomethasone propionate and budesonide were tested to verify the developed liquid phase method. RESULTS: The developed liquid phase method had high specificity, linear R2≥0,999, recovery (accuracy) RSD (relative standard deviation) less than 2%, precision RSD less than 2,0%, and stability RSD less than 2,0%. CONCLUSION: The liquid phase methodology developed in this study can be used for the determination of compound ipratropium bromide mixed with beclomethasone propionate and budesonide. The current methodology can also be used to provide a reference for the determination of its content after mixing, and further data support for its clinical medication.

Identification and Quantification by NMR Spectroscopy of the 22R and 22S Epimers in Budesonide Pharmaceutical Forms.

The authors developed four variants of the qNMR technique (1H or 13C nucleus, DMSO-d6 or CDCl3 solvent) for identification and quantification by NMR of 22R and 22S epimers in budesonide active pharmaceutical ingredient and budesonide drugs (sprays, capsules, tablets). The choice of the qNMR technique version depends on the drug excipients. The correlation of 1H and 13C spectra signals to molecules of different budesonide epimers was carried out on the basis of a comprehensive analysis of experimental spectral NMR data (1H-1H gCOSY, 1H-13C gHSQC, 1H-13C gHMBC, 1H-1H ROESY). This technique makes it possible to identify budesonide epimers and determine their weight ratio directly, without constructing a calibration curve and using any standards. The results of measuring the 22S epimer content by qNMR are comparable with the results of measurements using the reference HPLC method.

Self-Delivery Janus-Prodrug for Precise Immuno-Chemotherapy of Colitis-Associated Colorectal Cancer.

Aromatized thioketal (ATK) linked the immunoregulatory molecule (budesonide, Bud) and the cytotoxic molecule (gemcitabine, Gem) to construct a ROS-activated Janus-prodrug, termed as BAG. Benefiting from the hydrogen bonding, π-π stacking, and other intermolecular interactions, BAG could self-assemble into nanoaggregates (BAG NA) with a well-defined spherical shape and uniform size distribution. Compared to the carrier-based drug delivery system, BAG NA have ultrahigh drug loading content and ROS concentration-dependent drug release. Colitis-associated colorectal cancer (CAC) is a typical disease in which chronic inflammation transforms into tumors. BAG NA can be internalized by colon cancer C26 cells and then triggered by excessive intracellular ROS to release nearly 100% of the drugs. Based on this, BAG NA showed a stronger pro-apoptotic effect than free Bud combined with free Gem. What is gratifying is that orally administered BAG NA can precisely accumulate in the diseased colon tissues of CAC mice induced by AOM/DSS and simultaneously release Bud and Gem. Bud can regulate the tumor immune microenvironment to restore and enhance the cytotoxicity of Gem. Therefore, BAG NA maximizes the synergistic therapeutic effect through co-delivery of Bud and Gem. This work provided a cutting-edge method for constructing self-delivery Janus-prodrug based on ATK and confirmed its potential application in inflammation-related carcinogenesis.

A sensitive and high-throughput LC-ESI-MS/MS method to detect budesonide in human plasma: application to an evaluation of pharmacokinetics of budesonide intranasal formulations with and without charcoal-block in healthy volunteers.

Budesonide is one of the intranasal corticosteroids, referred as first-line therapy for allergic rhinitis. Its determination is a challenging task due to its extremely low plasma levels, which limits the progress in the investigation of pharmacokinetics and quality control of preparations. In this study, a sensitive and high-throughput method to determine budesonide in human plasma using budesonide-d8 as the internal standard was developed and validated. A small volume of plasma sample (0.2 mL) was diluted with 0.2 mL water, followed by a solid-phase extraction using Cleanert PEP-2 products. Extracted samples were analyzed by liquid chromatography coupled to electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS). Chromatographic separation of analytes was performed on an InertSustain AQ-C18 HP column (3 µm, 2.1 × 50 mm) under the reversed-phase condition with gradient elution. With the assay, linear calibration curves were obtained over the concentration range of 10-1200 pg/mL for budesonide, with considerable extraction recoveries (84.7-89.4%), and negligible matrix effects (<4.1). Moreover, the newly developed method was successfully applied to the evaluation of pharmacokinetics of two budesonide intranasal formulations with and without charcoal block in healthy volunteers.

Validation of a HPLC-UV method for the quantification of budesonide in skin layers.

A simple and sensitive HPLC method for the quantification of budesonide in skin layers was developed and validated. Budesonide was extracted from stratum corneum, epidermis and dermis by means of a mixture of acetonitrile:water (recovery > 90%). Budesonide quantification was performed with a RP-C18 column using methanol and water mixture (69:31, v/v) as mobile phase, pumped at 0.8 ml/min. The absorbance was monitored at 254 nm. The method resulted to be selective, linear in the range 0.05-5 or 10 µg/ml, precise and accurate. LLOQ resulted to be 0.05 µg/ml. The developed method appeared to be appropriate for the quantification of budesonide in skin layers at the end of in vitro permeation experiments since the recovery of the applied dose was 97 ± 1%, in line with requirement of the OECD guideline for the testing of the chemicals (Skin absorption: in vitro method).

The Budesonide-Hydroxypropyl-ß-Cyclodextrin Complex Attenuates ROS Generation, IL-8 Release and Cell Death Induced by Oxidant and Inflammatory Stress. Study on A549 and A-THP-1 Cells.

Synthetic glucocorticoids such as budesonide (BUD) are potent anti-inflammatory drugs commonly used to treat patients suffering from chronic inflammatory diseases. A previous animal study reported a higher anti-inflammatory activity with a 2-hydroxypropyl-ß-cyclodextrin (HPßCD)-based formulation of BUD (BUD:HPßCD). This study investigated, on cellular models (A549 and A-THP-1), the effect of BUD:HPßD in comparison with BUD and HPßCD on the effects induced by oxidative and inflammatory stress as well as the role of cholesterol. We demonstrated the protective effect afforded by BUD:HPßCD against cytotoxicity and ROS generation induced by oxidative and inflammatory stress. The effect observed for BUD:HPßCD was comparable to that observed with HPßCD with no major effect of cholesterol content. We also demonstrated (i) the involvement of the canonical molecular pathway including ROS generation, a decrease in PI3K/Akt activation, and decrease in phosphorylated/unphosphorylated HDAC2 in the effect induced by BUD:HPßCD, (ii) the maintenance of IL-8 decrease with BUD:HPßCD, and (iii) the absence of improvement in glucocorticoid insensitivity with BUD:HPßCD in comparison with BUD, in conditions where HDAC2 was inhibited. Resulting from HPßCD antioxidant and anticytotoxic potential and protective capacity against ROS-induced PI3K/Akt signaling and HDAC2 inhibition, BUD:HPßCD might be more beneficial than BUD alone in a context of concomitant oxidative and inflammatory stress.

Successful treatment of a patient with posttransplant IgA nephropathy with targeted release formulation of budesonide.

Recurrence of glomerulonephritis is the third-leading cause of allograft loss. Graft loss due to IgA nephropathy occurs in 10% at 10-year follow-up. The NEFIGAN trial demonstrated that Target Release Formulation (TRF) of budesonide is a specific treatment for IgA nephropathy targeting intestinal mucosal immunity upstream of disease manifestation with favorable safety profile. We are reporting a case of successful treatment of a patient with posttransplant IgA nephropathy with TRF of budesonide.

Design and in vitro characterization of multistage silicon-PLGA budesonide particles for inflammatory bowel disease.

Inflammatory bowel disease (IBD) affects a confined area of the intestine and, therefore, administration of drugs via oral route is preferable. However, obstacles such as changes in the pH along gastrointestinal tract (GIT), enzymatic activity, and intraluminal pressure may cause low drug availability in the target tissue when delivered orally. Previous studies have pointed out the benefits of using micron-sized particles for targeting inflamed intestinal mucosa and nanoparticles for delivery of anti-inflammatory agents to the affected epithelial cells. We hypothesized that by combining the benefits of micro- and nano- particles, we could create a more efficient delivery system for budesonide, a glucocorticosteroid commonly used for anti-inflammatory IBD therapy. The aim of this study was to develop a novel multistage system for oral delivery designed to increase concentrations budesonidein the inflamed intestinal tissue. The multistage system consists of Stage 1 mesoporous silicon microparticles (S1MP) loaded with stage 2 poly-lactic-glycolic acid (PLGA) budesonide-encapsulating nanoparticles (BNP). BNP were efficiently loaded into S1MP (loading efficiency of 45.9 ± 14.8%) due to the large pore volume and high surface area of S1MP and exhibited controlled release profiles with enhanced drug dissolution rate in biologically relevant pHs. Due to the robustness in acidic pH and their geometry, S1MP protected the loaded budesonide in the acidic (gastric) pH with only 20% release. This allowed for the prolonged release of the BNP in the higher pH conditions (intestinal pH). The sustained release of BNP could facilitate accumulation in the inflamed tissue, enabling BNP to penetrate inflamed mucosa and release active budesonide to the target site. The multistage systems of S1MP and BNP were further evaluated in three-dimensional (3D) in vitro model of IBD and were found to (1) increase accumulation of BNP in the inflamed areas, (2) restore the barrier function of Caco-2 inflamed monolayer, and (3) significantly reduce pro-inflammatory cytokine release almost to the level of the healthy control.

Ternary nanocomposite carriers based on organic clay-lipid vesicles as an effective colon-targeted drug delivery system: preparation and in vitro/in vivo characterization.

This study aimed to develop a new colon-targeted drug delivery system via the preparation of ternary nanocomposite carriers based on organic polymer, aminoclay and lipid vesicles. Budesonide (Bud), an anti-inflammatory drug was chosen as a model drug and encapsulated into three different formulations: liposome (Bud-Lip), aminoclay-coated liposome (AC-Bud-Lip), and Eudragit® S100-aminoclay double coated liposome (EAC-Bud-Lip). The formation of the aminoclay-lipid vesicle nanocomposite was confirmed by energy dispersive X-ray spectrum, transmission electron microscopy, and Fourier-transform infrared spectroscopy. All formulations were produced with a high encapsulation efficiency in a narrow size distribution. Drug release from EAC-Bud-Lip was approximately 10% for 2-h incubation at pH 1.2, implying the minimal drug release in acidic gastric condition. At pH 7.4, EAC-Bud-Lip underwent significant size reduction and exhibited drug release profiles similar to that from AC-Bud-Lip, implying the pH-dependent removal of the outer coating layer. Compared to free Bud solution, EAC-Bud-Lip achieved a higher drug uptake in Caco-2 cells and exhibited a stronger inhibition of TNF-α and IL-6 secretion in LPS-stimulated Raw264.7 cells. Furthermore, a bio-distribution study in mice demonstrated that Eudragit® S100-aminoclay dual coating led to a higher colonic distribution with a longer residence time, which correlated well with the delayed systemic drug exposure in rats. Taken together, the present study suggests that the ternary nanocomposite carrier consisting of Eudragit® S100, aminoclay, and lipid vesicle might be useful as an effective colon-targeted drug delivery system.