Evaluation of the soft tissue facial profile in different skeletal malocclusions in relation to age.

BACKGROUND: The aim of the study was to assess the thickness of the soft tissue facial profile (STFP) in relation to the skeletal malocclusion, age and gender. METHODS: All patients, aged 7-35 years, who were seeking orthodontic treatment at the Department of Orthodontics, Medical University of Warsaw between 2019 and 22 were included in the study. All patients had lateral head radiographs taken before the treatment. The cephalometric analysis was performed including the STFP analysis. The patients were allocated to one of six groups based on age and skeletal relations (ANB angle). The minimum number of patients in each group was 60 with equal gender distribution. The STFP analysis included ten linear measurements. RESULTS: A total of 300 patients were included in the study and allocated to five groups. Group 6 (growing patients with skeletal Class III malocclusion) was not included in the study as it failed to achieve the assumed group size. There were significant differences in the thickness of the STFP in relation to the skeletal malocclusions. Adults with skeletal Class III malocclusion had significantly thicker subnasal soft tissues compared to patients with skeletal Class I and Class II malocclusions. The thickness of the lower lip in patients with Class II skeletal malocclusion was significantly bigger compared to the other groups. Children and adolescents with Class II malocclusions had thicker lower lip in comparison to the group with Class I malocclusion. The majority of the STFP measurements were significantly smaller in children and adolescents compared to adults. The thickness of the STFP in males was significantly bigger in all age groups compared to females. CONCLUSIONS: The thickness of facial soft tissues depends on the patient's age and gender. The degree of compensation of the skeletal malocclusion in the STFP may be a decisive factor during orthodontic treatment planning regarding a surgical approach or a camouflage treatment of skeletal defects.

Is hand-wrist radiography still necessary in orthodontic treatment planning?

OBJECTIVES: The aim of our study is to compare the relationship between hand-wrist and cervical vertebra maturation stages with chronological age and to investigate the effect of malocclusion type on the relationship between these methods. MATERIALS AND METHODS: Hand-wrist and cephalometric radiographs of 1000 patients (526 females, 474 males) with a mean age of 13.41 ± 1.83 were analyzed. The methods of Bacetti et al. were used for the cervical vertebra maturation stage, and Björk, Grave and Brown's methods were used for the hand-wrist maturation stage. One-way ANOVA test was applied to compare skeletal classes between them. Tukey post hoc test was used to determine the differences. The relationship between the malocclusion type, cervical vertebra and hand-wrist maturation stages was evaluated with the Spearman correlation test. RESULTS: Spearman's correlation coefficient was 0.831, 0.831 and 0.760 in Class I, II and III females, respectively. In males, it was calculated as 0.844, 0.889 and 0.906, respectively. When sex and malocclusion were not differentiated, the correlation was found to be 0.887. All were statistically significant (P < 0.001). The highest correlation was observed in class III males, while the lowest was found in class III females. CONCLUSION: Cervical vertebrae can be used safely to assess pubertal spurt without hand-wrist radiography. Diagnosing growth and development stages from cephalometric images is important in reducing additional workload and preventing radiation risk.

Accuracy and reliability of magnetic resonance imaging in orthodontic diagnosis and treatment planning-a systematic review and meta-analysis.

BACKGROUND: Magnetic resonance imaging (MRI) is a non-ionizing imaging technique. Using MRI in dentistry may potentially lower the general radiation dose of the examined population, provided MRI can replace various radiation-based images. Furthermore, novel MRI imaging modalities for three-dimensional and two-dimensional cephalometrics have recently been developed for orthodontic diagnosis. OBJECTIVES: This systematic review aimed to determine the diagnostic accuracy and reliability of MRI in orthodontic diagnosis and treatment planning. SEARCH METHODS: An electronic search was conducted on 20 November 2022 in the following databases: PubMed, LILACS, Web of Science, EMBASE, Scopus, and Cochrane. The search was updated on 30 August 2023. Furthermore, a grey literature search was performed in Google Scholar and Open-Grey. SELECTION CRITERIA: This review included descriptive, observational, cohort studies, cross-sectional, case-control studies, and randomized/non-randomized trials related to the research question. The study excluded studies related to patients with syndromes, chronic diseases, craniofacial anomalies, or bone diseases. DATA COLLECTION AND ANALYSIS: The included studies were quality assessed using the "Joanna Brigg's Critical Appraisal Tool for diagnostic test accuracy". The GRADE approach for non-randomized studies was used for strength-of-evidence analysis. RESULTS: Eight of the 10 included studies compared MRI with either cone beam computed tomography or lateral cephalogram and found a high intra- and inter-rater agreement for landmark identification. The risk of bias was high in four studies, moderate in three, and low in three studies. Homogeneity was lacking among the included studies in terms of MRI imaging parameters and sample characteristics. This should be taken into consideration by future studies where uniformity with respect to these parameters may be considered. CONCLUSIONS: Despite dissimilarity and heterogeneity in the sample population and other methodological aspects, all the included studies concluded that MRI enjoyed considerable intra- and inter-examiner reliability and was comparable to current diagnostic standards in orthodontics. Furthermore, the studies agreed on the innovative potential of MRI in radiation-free diagnosis and treatment planning in orthodontics in the future. REGISTRATION: CRD number: CRD420223XXXXX.

Cranial Base Measurements in Skeletal Malocclusion among Orthodontic Patients.

BACKGROUND: Facial growth and development is necessary for proper orthodontic diagnosis and treatment planning. Growth of cranial base is linked to the overall growth of facial bones, especially the maxilla and mandible. Any change in the amount and direction of growth of the cranial base can have direct or indirect effects on the developing maxilla and mandible. Thus the aim of this study was to determine the linear and angular cranial base measurements in different skeletal malocclusion in Nepalese population. METHODS: Pretreatment lateral cephalograms of 225 patients aged between 17-30 years were collected. Linear measurements Sella-Nasion (S-N), Sella-Articulare (S-Ar), Articulare-Gonion (Ar-Go), Gonion-Gnathion (Go-Gn) and angular measurements Saddle angle (N-S-Ar), Articular angle (S-Ar-Go) and Gonial angle (Ar-Go-Gn) were measured. RESULTS: In angular measurements statistically significant differences were found in the saddle and gonial angles between class I, II, and III skeletal pattern. In linear measurements, anterior and posterior cranial base lengths were not significantly different among groups however, ramal height and mandibular body length were significantly different among groups with a P value < 0.05. CONCLUSIONS: Skeletal class III has a larger gonial angle, ramal height and mandibular length. Males have larger linear measurements and females have larger angular measurements.

CORRELATION BETWEEN TRANSVERSE CEPHALOMETRIC PARAMETERS AND THE SEVERITY OF SKELETAL MALOCCLUSIONS.

Malocclusion prevalence varies globally, ranging from 34.9% to 93.6% for Class I, 4.4% to 44.7% for Class II, and 1.4% to 19.4% for Class III occlusions. This study aims to assess transverse cephalometric measurements related to maxillary and mandibular dimensions, intermolar and intercanine distances, and other relevant factors. The descriptive cross-sectional research included 100 individuals with malocclusion grades 1, 2, and 3. The study involved 100 participants across three age groups (15-21, 22-28, 29-35), with the majority in the 22-28 range. Gender distribution showed a significant imbalance (77% female, 23% male). Cephalometric measurements for three malocclusion types revealed distinct patterns. Notably, inter-molar width exhibited a strong positive correlation with malocclusion severity (Malocclusion 1: r=0.504 to 0.561, Malocclusion 2: r=0.560 to 0.625, Malocclusion 3: r=0.625 to 0.559), while maxillary-mandibular transverse discrepancy had a negative correlation (Malocclusion 1: r=-0.496, Malocclusion 2: r=-0.483, Malocclusion 3: r=-0.483). Age-diverse sample, gender imbalance noted. Cephalometric correlations reveal inter-molar width association with malocclusion severity, emphasizing clinical implications.

Basal and dentoalveolar transverse parameters in different sagittal and vertical malocclusions in adults: a comparative study.

OBJECTIVE: This study sought to three-dimensionally (3D) evaluate the maxillomandibular basal bone and dentoalveolar widths using cone-beam computed tomography (CBCT) scans in adult Chinese populations with different vertical and sagittal facial skeletal patterns whilst no apparent posterior dental crossbite. MATERIALS AND METHODS: The retrospective cross-sectional comparative study enrolled CBCT images of 259 adult patients (125 males and 134 females). The subjects were divided into the hyperdivergent(n = 82), hypodivergent(n = 88), and normodivergent(n = 89) groups based on the Jarabak ratio (S-GO/N-Me), which were further divided into three subgroups of skeletal Class I, II and III, based on both the ANB angle and AF-BF parameters. ANOVA was used to analyze the extracted data of the studied groups. The intra- and inter-observer reliability was analyzed using the intra-class correlation coefficient (ICC). RESULTS: In all three vertical facial skeletal patterns, the skeletal Class II had significantly smaller mandibular basal bone width compared to skeletal Class I and Class III, both at the first molar and first premolar levels. The skeletal Class III seemed to have smaller maxillary basal bone width compared to skeletal Class I and Class II malocclusions; however, a significant difference was found only in the normodivergent pattern. As for the dentoalveolar compensation, it was most notable that in the hypodivergent growth pattern, the skeletal Class II had significantly smaller maxillary dentoalveolar width compared to the Class I and Class III groups, both at the first molar and first premolar levels. CONCLUSIONS: Based on the sample in the present study, skeletal Class II has the narrowest mandibular basal bone regardless of the vertical facial skeletal pattern. CLINICAL RELEVANCE: For Chinese adults with no apparent transverse discrepancy, the maxillomandibular basal bone and dentoalveolar widths are revealed in specific categories based on different vertical and sagittal facial skeletal patterns. In diagnosis and treatment planning, particular attention should be paid to skeletal Class II for possibly existing mandibular narrowing.

The orthodontic extraction of second premolars: The influence on airway volume.

INTRODUCTION: The extraction of second premolars and associated changes in the volume of the airway have not been previously explored. This retrospective study aimed to compare the volumetric changes of the airway preorthodontic and postorthodontic treatment in relevant extraction and control samples and to identify variables that may influence the outcome. METHODS: Cone-beam computed radiography scans of 54 patients with second premolar extraction and 59 nonextraction patients treated in a private orthodontic practice were matched for crowding. The average age for both samples was 15 years. The images were individually landmarked and measured by applying volumetric, linear, and angular parameters. The results were analyzed using repeated measures, such as variance analysis, correlation testing, and regression statistical analyses. RESULTS: There was a statistically significant increase in the airway volume for both groups (P <0.05). The difference in increase between the groups was not statistically significant. Seven variables demonstrated a collectively significant effect on changes to airway volume (F[7,112] = 38.48; P <0.001; r2 = 0.701), with 70% of the variation predicted by the variables. Multiple regression analyses indicated that changes to the area of minimum constriction (B = 32.45; t = 11.95; P <0.001) and changes to airway length (B = 94.75; t = 7.79; P <0.001) had a statistically significant effect on airway volume. CONCLUSIONS: The volume of the airway increased in both the extraction and nonextraction samples. The biggest contributors to the increase were an increase in airway length and an increase in the area of minimum constriction, which likely occurred as a result of natural growth.

Craniocervical posture in patients with skeletal malocclusion and its correlation with craniofacial morphology during different growth periods.

The association between craniocervical posture and craniofacial structures in the various sagittal skeletal malocclusion during different growth stages has been the focus of intense interest in fields of orthodontics, but it has not been conclusively demonstrated. Thus, this study aimed to investigate the association between craniofacial morphology and craniocervical posture in patients with sagittal skeletal malocclusion during different growth periods. A total of 150 from a large pool of cephalograms qualified for the inclusion and exclusion were evaluated and classified into three groups according to the Cervical Vertebral Maturation (CVM) by examining the morphological modifications of the second through fourth cervical vertebrae, each group consisted of 50 cephalograms. In each growth period, for the comparison of head and cervical posture differences among various skeletal classes, the radiographs were further subdivided into skeletal Class I (0° < ANB < 5°, n = 16), skeletal Class II (ANB ≥ 5°, n = 18), and skeletal Class III (0° ≤ ANB, n = 16) on the basis of their ANB angle. There was no significant difference in gender (P > 0.05). Some variables were found to be significant during pubertal growth and later in patients with sagittal skeletal malocclusion (P < 0.05). Most indicators describing craniocervical posture were largest in skeletal Class II and smallest in skeletal Class III during the peak growth periods and later. Cervical inclination variables were greater in skeletal Class III than in skeletal Class II. Variables of craniofacial morphology and craniocervical posture are more correlated during the pubertal growth period and later in patients with sagittal skeletal malocclusion. A tendency is an indication of the close interrelationship that a more extended head was in skeletal Class II while a flexed head was in skeletal Class III. Nevertheless, with the considerations of some limitations involved in this study, further longitudinal studies with large samples are required to elucidate the relationship clearly.

Three-dimensional analysis of mandibular morphology asymmetry and temporomandibular joint position in patients with unilateral Brodie bite.

OBJECTIVE: Previous studies have shown unilateral posterior crossbite is associated with mandibular asymmetry in morphology and position. However, it remains unclear whether unilateral Brodie bite plays a similar role in mandibular development. Therefore, this study aims to investigate the morphological and positional symmetry of mandibles in patients with unilateral Brodie bite by three-dimensional anaylsis. METHODS: Fourteen patients with unilateral Brodie bite (mean age 18.43 ± 4.24 years) and fourteen sex- and age-matched patients with normal occlusion (mean age 18.07 ± 5.48 years) underwent cone-beam computed tomography (CBCT) scans. 3D surface mesh models of their mandibles were established using Mimics Research 19.0. The surface matching percentage was compared between the original and mirrored mandible by Geomagic Control X software. Furthermore, the dimension and position of the temporomandibular joint (TMJ) were determined for both groups using InVivoDental 5.0. RESULTS: For surface-to-surface deviation analysis, the percentage of mismatch in patients with unilateral Brodie bite was significantly higher than the control group at ±0.50 mm, ±0.75 mm, and ±1.00 mm tolerance (P < .001). In patients with unilateral Brodie syndrome, the condyles on the scissors-bite side showed a significantly more anterior position (P = .03), greater medial inclination (P < .01), and larger posterior TMJ space (P = .01) than the non-scissors-bite side. CONCLUSION: Patients with unilateral Brodie bite exhibit a more asymmetrical mandibular morphology, with a greater anterior condylar position and posterior joint space on the scissors-bite side, indicating that early diagnosis and treatment may be necessary for patients with unilateral Brodie bite.

Analysis of mandibular asymmetry in adolescent and adult patients with unilateral posterior crossbite on cone-beam computed tomography.

INTRODUCTION: This study aimed to evaluate mandibular asymmetry in unilateral posterior crossbite (UPXB) patients and compare the asymmetry between adolescents and adults with UPXB. METHODS: This study included and analyzed cone-beam computed tomography scans of 125 subjects. The subjects were divided into a UPXB group and a control group according to the presence or absence of UPXB, and each group included adolescent patients (aged 10-15 years) and adult patients (aged 20-40 years). Linear, angular, and volumetric measurements were obtained to evaluate the asymmetries of the mandibles. RESULTS: Both adolescent and adult patients in the UPXB group presented asymmetries in condylar unit length, ramal height, body length, and mediolateral ramal inclination (P <0.05). Adult patients with UPXB showed greater asymmetries than adolescents. Differences with condylar unit length, condylar unit width, ramal height, condylar unit volume, and hemimandibular volume were significantly greater in adult UPXB patients than adolescent UPXB patients (P <0.05). CONCLUSIONS: The worsening of mandibular asymmetries in UPXB adults suggests that asymmetry in UPXB patients may progress over time; therefore, early treatment should be considered for UPXB adolescent patients. Further studies are still needed to evaluate the effectiveness of early treatment.

Comparison of mesiodistal angulations of premolars and molars in anterior open bite subjects with different sagittal malocclusions: A retrospective study.

INTRODUCTION: Mesiodistal angulation of premolars and molars can be altered by forces of open bite malocclusion. The aim of this study was to compare the mesiodistal angulations of the posterior teeth in class I, II, and III individuals with anterior open bite (AOB) versus individuals with harmonious occlusion. METHODS: This comparative cross-sectional study used 299 lateral head radiographs of individuals with permanent dentition. There were 4 groups (harmonious occlusion [n=89], Class I open bite [OB] [n=75], Class II OB [n=66], and Class III OB [n=69]). Premolar (1UPM, 2UPM) and molar (1UM, 2UM) angulations were measured relative to the occlusal plane and the palatal or mandibular plane by a trained and calibrated evaluator. ANOVA and Scheffe tests were used for statistical analyses (P<0.05). RESULTS: The mesial angulation of the upper premolars showed greater angulation of between approximately 2° and 5° in the OB groups compared to the harmonious occlusion group (P<0.05). Only in the Class II OB group did the first and second upper molars show distal angulation in relation to the palatal plane (1UM 81.85°±5.42°; 2UM 75.32±7.4°) (P<0.05). The Class III OB group presented the greatest distal angulations of the lower premolars and molars (between 3° to 5° of difference, P<0.05) in relation to those of the harmonious occlusion group. CONCLUSIONS: The upper first premolars in all the AOB groups and the lower second premolars in the Class II OB group had greater mesioangulation. Additionally, the upper molars of the Class II OB group and the lower molars of the Class III OB group showed distoangulation compared with the molars in the group with harmonious occlusion.

Multivariate analysis of alveolar bone dehiscence and fenestration in anterior teeth after orthodontic treatment: A retrospective study.

OBJECTIVE: To compare the prevalence of fenestration and dehiscence between pre- and post-orthodontic treatment and to explore the factors related to fenestration and dehiscence in the anterior teeth after treatment. METHODS: This study included 1000 cone-beam computed tomography (CBCT) scans of 500 patients before (T1) and after (T2) orthodontic treatment. These images were imported into Dolphin 11.9 software to detect alveolar fenestration and dehiscence in the anterior teeth area. The chi-square test and Fisher's exact test were performed to compare the prevalence of alveolar bone defects between time points T1 and T2. A total of 499 patients were selected for logistic regression analysis to examine the correlation among age, sex, crowding, sagittal facial type, extraction, miniscrew use and fenestration or dehiscence post-treatment. RESULTS: Except for the maxillary lingual fenestration and labial fenestration of mandibular canines, a significant change in the prevalence of fenestration and dehiscence was noted between time points T1 and T2 (P < .025). Multinomial logistic regression showed that age, miniscrew use and extraction highly influenced the prevalence of anterior lingual dehiscence (P < .05). Dehiscence of the mandibular labial side (skeletal Class III vs. I, OR = 2.368, P = .000) and fenestration of the mandibular lingual side (skeletal Class II vs. I, OR = 2.344, P = .044) were strongly correlated with the sagittal facial type. Dehiscence of the maxillary labial side (moderate vs. mild, OR = 1.468, P = .017) was significantly associated with crowding. CONCLUSIONS: Older age, maxillary moderate crowding, skeletal Class III, extraction and miniscrew potentially significantly affect the prevalence of anterior teeth dehiscence. Adult females, skeletal Class III patients on the mandibular labial side and skeletal Class II patients on the mandibular lingual side should be monitored for anterior teeth fenestration.

Three-dimensional evaluation of dentopalatal changes after rapid maxillary expansion in growing children.

INTRODUCTION: In growing children with transverse malocclusion problems, various types of rapid maxillary expanders (RMEs) have been effectively used in skeletal and dental expansions. We evaluated 3-dimensional dentopalatal changes in growing children who underwent maxillary expansion using RMEs and bonded RMEs. METHODS: We investigated dentopalatal changes in 20 patients treated with bonded RMEs, 19 with RMEs, and 38 control patients. Dental plaster models before and after expansion were scanned 3-dimensionally and superimposed to evaluate transverse expansion, expansion ratio, angular expansion, and palatal expansion height ratio. RESULTS: Using bonded RMEs, similar anterior and posterior dental expansions were achieved with an efficiency of 69%-76% (expansion ratio), and palatal soft-tissue expansion occurred more apically in the posterior area (palatal expansion height ratio, 1.00) than in the anterior area (palatal expansion height ratio, 0.64). Using RMEs, a larger posterior dental expansion was achieved, with an efficiency of 106%-117% (expansion ratio), than anterior dental expansion (55%-60%), and palatal soft-tissue expansion occurred more apically in the posterior area (palatal expansion height ratio, 0.99) than anterior area (palatal expansion height ratio, 0.23). CONCLUSIONS: Dental expansions in the anterior and posterior areas were similar using bonded RMEs, whereas the posterior dental expansions were larger than those of the anterior area using RMEs. The entire palatal soft-tissue slope expanded in the posterior area, whereas the occlusal part expanded in the anterior area using RMEs and bonded RMEs.

Analysis of maxillary asymmetry before and after treatment of functional posterior cross-bite: a retrospective study using 3D imaging system and deviation analysis.

BACKGROUND: Previous evidence would suggest that subjects affected by functional posterior cross-bite (FPXB) present an asymmetric morphology of the maxilla. However, no evidence is available concerning the morphology (symmetry/asymmetry) of the maxilla after treatment of FPXB. This study aimed to investigate the volumetric and morphological changes of the palate in FPXB subjects treated with maxillary expansion and to compare these data with an untreated control group. The study sample included 20 FPXB subjects (mean age 8.1 ± 0.9 years) who underwent maxillary expansion (MEG group) and 21 FPXB subjects (mean age 7.7 ± 1.2 years) as controls (CG group). Digital models were recorded at T0 (first observation) and T1 (12-18 months after first observation) and analyzed to assess palatal volume and symmetry. Deviation analysis and percentage matching calculation were also performed between original and mirrored palatal models for each patient. All data were statistically analyzed for intra-timing, inter-timing and inter-groups assessments. RESULTS: At T0, the cross-bite side (CBS) was significantly smaller than non-cross-bite side (non-CBS) in both groups (p < 0.05). At T1, the CBS/non-CBS difference reduced significantly in the MEG group (p < 0.05) while slightly worsened in the CG, however without statistical significance (p > 0.05). The matching percentage of the palatal models improved significantly at T1 in the MEG group (T0 = 74.02% ± 9.8; T1 = 89.95% ± 7.12) (p < 0.05) while no significant differences were recorded in the CG (T0 = 76.36 ± 8.64; 72.18% ± 9.65) (p > 0.05). LIMITATIONS: The small sample size and the retrospective design of the study represent two limitations that should be overcome with further clinical trials. CONCLUSIONS: Subjects with FPXB present an asymmetric development of the maxillary vault that improves after reestablishment of normal occlusion following maxillary expansion.

Relationship between vertical facial morphology and dental arch measurements in class II malocclusion: a retrospective study.

Background: To evaluate the relationship between dental arch measurements and the vertical facial pattern determined in skeletal Class II untreated patients. Methods: Lateral cephalograms and plaster models were obtained from 124 untreated female adults (average age: 17.6 ± 3.8 years). Class I (CI), Class II Division 1 (CII/1) and Class II Division 2 (CII/2) malocclusions were divided into three subgroups according to their vertical morphology as hypodivergent, normodivergent and hyperdivergent. The multivariate variance analysis (MANOVA) method was used in the comparison of measurement values according to vertical and sagittal morphology. The relationship between both A point-Nasion-B point (ANB) and Frankfurt-mandibular plane (FMA) angles and dental arch measurements was examined by Pearson correlation analysis. The significance level was received as p < 0.05. Results: While vertical morphology has a statistically significant effect on mandibular arch length, sagittal morphology affects maxillary arch depth. The parameters influenced by both morphologies are maxillary and mandibular arch length, as well as maxillary intermolar width. The mandibular arch length was significantly shorter in hyperdivergent-CII-2 malocclusion (50.5 ± 7.4 mm). Larger values were obtained in both mandibular arch length and maxillary arch depth measurements in CII-1 malocclusion compared to CII-2 malocclusion. The maxillary intermolar width was significantly shorter in hypodivergent-CII-1 malocclusion (46.8 ± 3.4 mm), while it was higher in hypodivergent-CI malocclusion (51.1 ± 3.4 mm). The maxillary arch length was the lowest in hyperdivergent-CI malocclusion (63.1 ± 13.3 mm) and the highest in hypodivergent-CI malocclusion (72.8 ± 7.6 mm). Additionally, a positive but weak correlation was found between ANB and FMA angles. Conclusion: Dental arch measurements have been found to be affected by both vertical facial morphology and skeletal sagittal relationship. A positive correlation was found between ANB and FMA angles.

Three-dimensional evaluation of the temporomandibular joints after unilateral surgically assisted rapid maxillary expansion in adults: A preliminary retrospective study.

BACKGROUND: Unilateral surgically assisted rapid maxillary expansion (U-SARME) is a successful method for correction of true unilateral posterior crossbite (TUPC). OBJECTIVES: This retrospective preliminary study aimed to evaluate the position and morphology of condyles in TUPC cases and the effects of U-SARME on condyle with the help of cone beam computed tomography (CBCT). METHODS: Fifteen patients (mean age: 18.69 ± 1.59 years) who were diagnosed as TUPC and undergone U-SARME were selected. Preoperative (T0) and after 6-month retention (T1) DICOM data of CBCT images were evaluated with MIMICs version 19.0 software. Condylar morphology (medio-lateral and antero-posterior dimensions) and position (anterior, posterior, medial and lateral joint spaces, frontal/axial axis angles, the ratio of posterior to anterior joint space and the percentage of posterior to anterior joint space) were evaluated. Student's t-test was used for intergroup (crossbite, normal) comparisons. Paired-samples t-test was used for intra-group comparisons (p = .05). RESULTS: There were no positional or dimensional asymmetry of the condyles between crossbite and normal sides initially and after expansion. Regarding T0-T1 changes, while significant increase was determined in medial (0.3 ± 0.29 mm; p = .001) and superior (0.39 ± 0.7 mm; p = .045) joint spaces on crossbite side, posterior (0.79 ± 0.99 mm; p = .008), superior (0.5 ± 0.79 mm; p = .029) and lateral joint spaces (0.31 ± 0.54 mm; p = .042) presented significant increases on normal side. However, no significant changes were found between crossbite and normal sides at T0 and T1. CONCLUSIONS: Condyles were symmetrical in true unilateral posterior crossbite cases and the symmetry were not disrupted following U-SARME.

Effect of rapid maxillary expansion on masticatory and swallowing functions in children with posterior crossbite.

OBJECTIVE: Investigate the influence of posterior crossbite on masticatory and swallowing functions by videofluoroscopy examination and to analyze the effects of Rapid Maxillary Expansion (RME) on the same functions. METHODS: A prospective longitudinal study was conducted on 32 children, 21 of them with posterior crossbite (10 girls and 11 boys, mean age 9.2 years, study group) and 11 children with no occlusal changes (6 girls and 5 boys, mean age 9.3 years, control group). The children were evaluated by an orthodontist for diagnosis, group characterization and occlusal treatment, by the otorhinolaryngology team for the assessment of respiratory symptoms, and by a speech therapist for videofluoroscopic evaluation of masticatory and swallowing parameters. The children with posterior crossbite were treated orthodontic ally using the Haas disjunctor for approximately six months and re-evaluated 5-months after removal of the appliance. Data were analyzed statistically by the Studentt-test for independent samples for comparison of the crossbite and control groups before and after treatment. RESULTS: There was no significant difference in oral preparatory and oral transit times, nor in cycles and masticatory frequency, between the pre and post orthodontic treatment groups and the control group. CONCLUSION: Rapid maxillary expansion did not influence the masticatory and swallowing variables studied by videofluoroscopy. However, the data require caution in interpretation.

Comparison of nasal cavity changes between the expander with differential opening and the fan-type expander: a secondary data analysis from an RCT.

INTRODUCTION: The aim of this study was to compare the nasal cavity skeletal changes between the expander with differential opening (EDO) and the fan-type expander (FE). METHODS: This study was a secondary analysis of a previous randomized clinical trial. Forty-eight patients with posterior crossbite were randomly allocated into two study groups. Twenty-four patients (11 male, 13 female) with a mean initial age of 7.6 ± 0.9 years were treated with rapid maxillary expansion (RME) using the EDO. Twenty-four patients (10 male, 14 female) with a mean initial age of 7.8 ± 0.9 years were treated with the FE. Cone-beam computed tomography (CBCT) was performed before treatment and 1 to 6 months after the active phase of RME. Using frontal CBCT slices passing at the level of maxillary permanent first molars and maxillary deciduous canines, the width of the nasal cavity was measured in the lower, middle and upper thirds. Nasal cavity height was also evaluated in both slices. Intergroup comparisons of interphase changes were performed using t or Mann-Whitney tests (P < 0.05). RESULTS: The two groups were similar regarding baseline data. EDO showed a greater transverse increase in the lower third of the nasal cavity in both canine (P = 0.007) and molar regions (P < 0.001). No intergroup difference was observed for changes in middle and upper widths and height of the nasal cavity. CONCLUSIONS: Both expanders are effective in promoting an increase of the nasal cavity skeletal dimensions. The expander with differential opening produced a greater transverse increase in the lower third of the nasal cavity compared to the fan-type expander, both at the anterior and posterior regions of the maxilla. CLINICAL RELEVANCE: EDO might be more beneficial to pediatric patients with oral breathing and obstructive sleep apnea compared to FE.

Tridimensional assessment of the mandibular angle in patients with different skeletal patterns by cone-beam computed tomography scans: a retrospective study.

BACKGROUND: Since the muscles of chewing are involved in the region of the mandibular angle, important structures in surgical and orthodontic procedures, to study its morphological aspects and the possible influence of different patterns of skeletal development would be of interest. Thus, this study aimed to assess the influence of patient characteristics - such as sex, skeletal malocclusion (Class I, Class II, and Class III) and facial type (brachycephalic, mesocephalic, and dolichocephalic) - on the width, height, thickness, and volume of the mandibular angle, using cone-beam computed tomography (CBCT) scans. METHODS: CBCT scans were assessed - 144 men and 154 women, total of 298 - and classified according to skeletal patterns (skeletal malocclusions and facial types). Width, height, and thickness of the mandibular angle were measured using OnDemand 3D software. The volumetric measures of the mandibular angle were obtained using the ITK-SNAP software. Analysis of Variance (multiway ANOVA) with Tukey's post-hoc test compared the data, with a 5% significance level. RESULTS: Among the factors studied, sex significantly influenced all the analyzed variables (height, width, thickness, and volume of the mandibular angle) (p < 0.05); in general, male individuals presented higher values than females. In some cases, the skeletal malocclusion and facial type factors influenced only the width and height variables (p < 0.05); in general, the Class III and dolichocephalic individuals presented higher values in relation to the other types of skeletal malocclusions and facial types. CONCLUSIONS: Variations in the craniofacial growth pattern, considering the different skeletal malocclusions and facial types, had some influence in the width and height dimensions of the mandibular angle. Furthermore, sex influenced all the studied variables.

The effect of myotonic dystrophy type 1 on temporomandibular joint and dentofacial morphology: A CBCT analysis.

BACKGROUND: Myotonic dystrophy type 1 (DM1) is a neuromuscular multisystem disease. Early involvement of facial muscles may produce an extra load on the temporomandibular joint (TMJ) in DM1. OBJECTIVES: This study aimed to investigate the morphological analyses of the bone components of temporomandibular joint (TMJ), and dentofacial morphology in myotonic dystrophy type 1 (DM1) patients by cone-beam computed tomography (CBCT). METHODS: Sixty-six individuals (33 DM1, and 33 healthy subjects) age ranging from 20 to 69 were included in the study. Clinical examinations of the patients' TMJ regions and evaluation of dentofacial morphology (maxillary deficiency, open-bite, deep palate and cross-bite) were performed. Dental occlusion was determined based on Angle's classification. CBCT images were evaluated regarding mandibular condyle morphology (convex, angled, flat and round) and osseous changes observed in the condyle (normal, osteophyte, erosion, flattening, sclerosis). DM1-specific morphological and bony TMJ alterations were determined. RESULTS: DM1 patients showed a high prevalence of morphological and osseous TMJ changes, and statistically significant skeletal alterations. The analysis of CBCT scans indicated the prevalent condylar shape among patients with DM1 was flat, the main osseous abnormality was flattening, there was a tendency towards skeletal Class II and a posterior cross-bite was frequently detected in DM1 patients. There was no statistically significant difference between the genders on the parameters evaluated in both groups. CONCLUSION: Adult patients with DM1 presented a high frequency of crossbite, tendency to skeletal Class II and morphological osseous alterations of TMJ. The analysis of the morphological condylar alterations in patients with DM1 may be beneficial in the diagnosis of TMJ disorders. This study reveals DM1-specific morphological and osseous TMJ alterations to provide an appropriate orthodontic/orthognathic treatment planning to patients.