Scaling high-speed counter-current chromatography for preparative neodymium purification: Insights and challenges.

Efficient rare earth element (REE) separations are becoming increasingly important to technologies ranging from renewable energy and high-performance magnets to applied radioisotope separations. These separations are made challenging by the extremely similar chemical and physical characteristics of the individual elements, which almost always occupy the 3+ oxidation state under ambient conditions. Herein, we discuss the development of a novel REE separation aimed at obtaining purified samples of neodymium (Nd) on a multi-milligram scale using high-speed counter-current chromatography (HSCCC). The method takes advantage of the subtle differences in ionic radii between neighboring REEs to tune elution rates in dilute acid through implementation of the di-(2-ethylhexyl)phosphoric acid (HDEHP)-infused stationary phase (SP) of the column. A La/Ce/Nd/Sm separation was demonstrated at a significantly higher metal loading than previously accomplished by HSCCC (15 mg, RNd/REE > 0.85), while the Pr/Nd separation was achieved at lower metal loadings (0.3 mg, RNd/Pr = 0.75 - 0.83). The challenges associated with scaling REE separations via HSCCC are presented and discussed within.

Pixel Screening in Lifetime-Based Temperature Mapping Using ß-NaYF4:Nd3+,Yb3+ by Time-Gated Near-Infrared Fluorescence Imaging on Deep Tissue in Live Mice.

Near-infrared fluorescence (NIRF) thermometry is an emerging method for the noncontact measurement of in vivo deep temperatures. Fluorescence-lifetime-based methods are effective because they are unaffected by optical loss due to excitation or detection paths. Moreover, the physiological changes in body temperature in deep tissues and their pharmacological effects are yet to be fully explored. In this study, we investigated the potential application of the NIRF lifetime-based method for temperature measurement of in vivo deep tissues in the abdomen using rare-earth-based particle materials. ß-NaYF4 particles codoped with Nd3+ and Yb3+ (excitation: 808 nm, emission: 980 nm) were used as NIRF thermometers, and their fluorescence decay curves were exponential. Slope linearity analysis (SLA), a screening method, was proposed to extract pixels with valid data. This method involves performing a linearity evaluation of the semilogarithmic plot of the decay curve collected at three delay times after cutting off the pulsed laser irradiation. After intragastric administration of the thermometer, the stomach temperature was monitored by using an NIRF time-gated imaging setup. Concurrently, a heater was attached to the lower abdomens of the mice under anesthesia. A decrease in the stomach temperature under anesthesia and its recovery via the heater indicated changes in the fluorescence lifetime of the thermometer placed inside the body. Thus, NaYF4:Nd3+/Yb3+ functions as a fluorescence thermometer that can measure in vivo temperature based on the temperature dependence of the fluorescence lifetime at 980 nm under 808 nm excitation. This study demonstrated the ability of a rare-earth-based NIRF thermometer to measure deep tissues in live mice, with the proposed SLA method for excluding the noisy deviations from the analysis for measuring temperature using the NIRF lifetime of a rare-earth-based thermometer.

Near-infrared mechanoluminescence sensor: A new method for on-site infrastructure detection.

Near-infrared mechanoluminescence is a phenomenon that produces high penetrating near-infrared light under external stimulation. Near-infrared light coincides with the biological window, lower optical loss, and the fact that the mechanoluminescence material is a medium that converts mechanical energy into light energy. The near-infrared mechanoluminescence material has potential application prospects in the fields of biological imaging, medical diagnosis, and monitoring of building materials. In this article, we report on a perovskite-type Sr3Sn2O7:Nd3+ near-infrared mechanoluminescence material, and its peaks locate in the first near-infrared window (800-1000 nm) and the second near-infrared window (1080, 1350 nm), respectively. Under the condition of pre-sintering with Li2CO3 as flux, the best sintering conditions are obtained, and the luminescence of material is in perfect agreement with the applied mechanical stress. In addition, a near-infrared mechanoluminescence sensor is proposed to solve the problem of building damage and timely maintenance.

Cerium oxide and neodymium oxide phytoextraction by ryegrass in bioenhanced hydroponic environments.

Sustainable technologies for the recovery of rare earth elements (REE) from waste need to be developed to decrease the volume of ore mining extractions and its negative environmental consequences, while simultaneously restoring previously impacted lands. This is critical due to the extensive application of REE in everyday life from electronic devices to energy and medical technologies, and the dispersed distribution of REE resources in the world. REE recovery by plants has been previously studied but the feasibility of REE phytoextraction from a poorly soluble solid phase (i.e., nanoparticles) by different plant species has been rarely investigated. In this study, the effect of biostimulation and bioaugmentation on phytorecovery of REE nanoparticles (REE-NP) was investigated by exposing ryegrass seeds to REE-NP in hydroponic environments. This was studied in two sets of experiments: bioaugmentation (using CeO2 nanoparticles and Methylobacterium extorquens AM1 pure culture), and biostimulation (using CeO2 or Nd2O3 nanoparticles and endogenous microorganisms). Addition of M. extorquens AM1 in bioaugmentation experiment including 500 mg/L CeO2 nanoparticles could not promote the nanoparticles accumulation in both natural and surface-sterilized treatments. However, it enhanced the translocation of Ce from roots to shoots in sterile samples. Moreover, another REE-utilizing bacterium, Bacillus subtilis, was enriched more than M. extorquens in control samples (no M. extorquens AM1), and associated with 52% and 14% higher Ce extraction in both natural (165 µg/gdried-plant) and surface-sterilized samples (136 µg/gdried-plant), respectively; showing the superior effect of endogenous microorganisms' enrichment over bioaugmentation in this experiment. In the biostimulation experiments, up to 705 µg/gdried-plant Ce and 19,641 µg/gdried-plant Nd could be extracted when 500 mg/L REE-NP were added. Furthermore, SEM-EDS analysis of the surface and longitudinal cross-sections of roots in Nd2O3 treatments confirmed surface and intracellular accumulation of Nd2O3-NP. These results demonstrate stimulation of endogenous microbial community can lead to an enhanced REE phytoaccumulation.

Adsorption and bacterial performance of Nd2O3 modified Ag nanoparticles with enhanced degradation of methylene blue.

Our study focused on the optical behavior, methylene blue (MB) dye degradation potential, antibacterial performance, and silver and trioxide mineral interaction with different bacterial species. We found that the addition of silver nanoparticles (Ag NPs) to neodymium oxide (Nd2O3) resulted in a significant response, with an enlargement of the inhibition zone for bacterial species such as Staphylococcus aureus and Escherichia coli. Specifically, the inhibition zone for S. aureus increased from 9.3 ± 0.5 mm for pure Nd2O3 to 16.7 ± 0.4 mm for the Ag/Nd2O3 nano-composite, while for E. coli, it increased from 8.8 ± 0.4 mm for Nd2O3 to 15.9 ± 0.3 mm for Ag/Nd2O3. Furthermore, the optical behavior of the composites showed a clear band-gap narrowing with the addition of Ag NPs, resulting in enhanced electronic localization. The direct and indirect transitions reduced from 6.7 to 6.1 eV and from 5.2 to 2.9 eV, respectively. Overall, these results suggest that the Ag/Nd2O3 nano-composite has potential applications in sensor industries and water treatment, thanks to its enhanced optical behavior, antibacterial performance, and efficient MB degradation capabilities. In terms of MB degradation, the Ag/Nd2O3 mixed system exhibited more efficient degradation compared to pure Nd2O3. After 150 min, the MB concentration in the mixed system decreased to almost half of its starting point, while pure Nd2O3 only reached 33%.

Near-Infrared Dual-Modal Sensing of Force and Temperature in Total Knee Replacement Using Mechanoluminescent Phosphor of Sr3Sn2O7: Nd, Yb.

Knee replacement surgery confronts challenges including patient dissatisfaction and the necessity for secondary procedures. A key requirement lies in dual-modal measurement of force and temperature of artificial joints during postoperative monitoring. Here, a novel non-toxic near-infrared (NIR) phosphor Sr3Sn2O7:Nd, Yb, is designed to realize the dual-modal measurement. The strategy is to entail phonon-assisted upconversion luminescence (UCL) and trap-controlled mechanoluminescence (ML) in a single phosphor well within the NIR biological transmission window. The phosphor is embedded in medical bone cement forming a smart joint in total knee replacements illustrated as a proof-of-concept. The sensing device can be charged in vitro by a commercial X-ray source with a safe dose rate for ML, and excited by a low power 980 nm laser for UCL. It attains impressive force and temperature sensing capabilities, exhibiting a force resolution of 0.5% per 10 N, force detection threshold of 15 N, and a relative temperature sensitive of up to 1.3% K-1 at 309 K. The stability against humidity and thermal shock together with the robustness of the device are attested. This work introduces a novel methodological paradigm, paving the way for innovative research to enhance the functionality of artificial tissues and joints in living organisms.

The importance of the pretreatment of samples in Nd quantification from NdFeB magnets through inductively coupled plasma atomic emission spectroscopy (ICP-OES)-a rapid and streamlined methodology.

In this study, we emphasize the critical role of sample pretreatment. We report on the behavior of NdFeB magnet samples exposed to four different acid media for digestion. NdFeB magnets are becoming a significant source of neodymium, a rare-earth element critical to many technologies and a potential substitute for traditional mining of the element. To address this, we meticulously tested nitric acid, hydrochloric acid, acetic acid, and citric acid, all at a concentration of 1.6 M, as economical and environmentally friendly alternatives to the concentrated mineral acids commonly used in the leaching of these materials. The pivotal stage involves the initial characterization of samples in the solid state using SEM-EDX and XPS analysis to obtain their initial composition. Subsequently, the samples are dissolved in the four aforementioned acids. Finally, neodymium is quantified using ICP-OES. Throughout our investigation, we evaluated some analytical parameters to determine the best candidate for performing the digestion, including time, limits of detection and quantification, accuracy, recovery of spike samples, and robustness. After careful consideration, we unequivocally conclude that 1.6 M nitric acid stands out as the optimal choice for dissolving NdFeB magnet samples, with the pretreatment of the samples being the critical aspect of this report.

Enhanced rare-earth separation with a metal-sensitive lanmodulin dimer.

Technologically critical rare-earth elements are notoriously difficult to separate, owing to their subtle differences in ionic radius and coordination number1-3. The natural lanthanide-binding protein lanmodulin (LanM)4,5 is a sustainable alternative to conventional solvent-extraction-based separation6. Here we characterize a new LanM, from Hansschlegelia quercus (Hans-LanM), with an oligomeric state sensitive to rare-earth ionic radius, the lanthanum(III)-induced dimer being >100-fold tighter than the dysprosium(III)-induced dimer. X-ray crystal structures illustrate how picometre-scale differences in radius between lanthanum(III) and dysprosium(III) are propagated to Hans-LanM's quaternary structure through a carboxylate shift that rearranges a second-sphere hydrogen-bonding network. Comparison to the prototypal LanM from Methylorubrum extorquens reveals distinct metal coordination strategies, rationalizing Hans-LanM's greater selectivity within the rare-earth elements. Finally, structure-guided mutagenesis of a key residue at the Hans-LanM dimer interface modulates dimerization in solution and enables single-stage, column-based separation of a neodymium(III)/dysprosium(III) mixture to >98% individual element purities. This work showcases the natural diversity of selective lanthanide recognition motifs, and it reveals rare-earth-sensitive dimerization as a biological principle by which to tune the performance of biomolecule-based separation processes.

Antibacterial activity of novel synthesized chitosan-graft-poly(N-tertiary butylacrylamide)/neodymium composites for biomedical application.

In this present study, composites of chitosan-graft-poly(N-tertiary butylacrylamide) (CH-graft-poly(N-tert-BAAm)) copolymer, with Neodymium (Nd), an important rare earth element, were prepared by precipitation technique. Nd was successfully incorporated into the polymer of different weight percentages (0.5%, 1%, and 2%) without any degradation. The effect of neodymium additives on the structural, morphological, and antibacterial activities against gram-positive bacteria and gram-negative bacteria of the polymer was analyzed using various instrument techniques. X-ray diffraction (XRD) results together with Fourier Transform Infrared (FT-IR), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) studies confirmed the morphology of Nd-doped CH-graft-poly(N-tert-BAAm) composites without any other impurities. The antibacterial effect of Nd was studied by adding it to the copolymer in a weight ratio of 0.5%-2%. The antibacterial effect of neodymium concentration on four different strains of bacteria was investigated: Escherichia coli (ATCC 25922) (E. coli), Pseudomonas aeruginosa (DSM 50071) (P. aeruginosa), Bacillus subtilis (DSM 1971) (B. subtilis), and Staphylococcus aureus subsp. aureus (ATCC 25923) (S. aureus). The antibacterial activities of the obtained composites were determined using the Agar Well Diffusion Assay Method. Experimental results show that Nd binds well to CH-graft-poly(N-tert-BAAm). Activity against E. coli, P. aeruginosa, B. subtilis, and S. aureus subsp. aureus creates a potential for pharmaceutical and biomedical applications.

The Coming of Age of Neodymium: Redefining Its Role in Rare Earth Doped Nanoparticles.

Among luminescent nanostructures actively investigated in the last couple of decades, rare earth (RE3+) doped nanoparticles (RENPs) are some of the most reported family of materials. The development of RENPs in the biomedical framework is quickly making its transition to the ∼800 nm excitation pathway, beneficial for both in vitro and in vivo applications to eliminate heating and facilitate higher penetration in tissues. Therefore, reports and investigations on RENPs containing the neodymium ion (Nd3+) greatly increased in number as the focus on ∼800 nm radiation absorbing Nd3+ ion gained traction. In this review, we cover the basics behind the RE3+ luminescence, the most successful Nd3+-RENP architectures, and highlight application areas. Nd3+-RENPs, particularly Nd3+-sensitized RENPs, have been scrutinized by considering the division between their upconversion and downshifting emissions. Aside from their distinctive optical properties, significant attention is paid to the diverse applications of Nd3+-RENPs, notwithstanding the pitfalls that are still to be addressed. Overall, we aim to provide a comprehensive overview on Nd3+-RENPs, discussing their developmental and applicative successes as well as challenges. We also assess future research pathways and foreseeable obstacles ahead, in a field, which we believe will continue witnessing an effervescent progress in the years to come.

Synthesis, Structure and Near Infrared Fluorescence Property of a New Nd-MOF Based on a Triangular Benzylamine Ligand.

A new 3D metal-organic framework (Nd-MOF) {[Nd2L2]·2NH2(CH3)2·3H2O} was successfully established via a solvothermal method with Nd3+ ion and 5-(bis(4-carboxybenzyl) amino)-isophthalicacid (H4L), and has also been characterized by X-ray diffraction, powder X-ray diffraction (PXRD), IR and photoluminescence(PL)spectrum. The neodymium ions are free of coordinated solvents, and the Nd-MOF exhibits strong near-infrared (NIR) fluorescence. Besides, Its NIR fluorescence property shows low temperature resistance, which is favorable for being used in the low temperature environment. Besides, the fluorescence lifetime of Nd-MOF is 6.03 µs, and the quantum yield is 1.2%. The small quantum yield may owe to large energy gap between the T1 of the ligand H4L and the resonance energy level 4F3/2 of the Nd3+ ion, or due to large crystal size of the Nd-MOF.

Luminescent Properties of Phosphonate Ester-Supported Neodymium(III) Nitrate and Chloride Complexes.

This study examines the synthesis of two geminal bisphosphonate ester-supported Ln3+ complexes [Ln(L3)2(NO3)3] (Ln = Nd3+ (5), La3+ (6)) and optical properties of the neodymium(III) complex. These results are compared to known mono-phosphonate ester-based Nd3+ complexes [Nd(L1/L2)3X3]n (X = NO3-, n = 1; Cl-, n = 2) (1-4). The optical properties of Nd3+ compounds are determined by micro-photoluminescence (µ-PL) spectroscopy which reveals three characteristic metal-centered emission bands in the NIR region related to transitions from 4F3/2 excited state. Additionally, two emission bands from 4F5/2, 2H9/2 → 4IJ (J = 11/2, 13/2) transitions were observed. PL spectroscopy of equimolar complex solutions in dry dichloromethane (DCM) revealed remarkably higher emission intensity of the mono-phosphonate ester-based complexes in comparison to their bisphosphonate ester congener. The temperature-dependent PL measurements enable assignment of the emission lines of the 4F3/2 → 4I9/2 transition. Furthermore, low-temperature polarization-dependent measurements of the transitions from R1 and R2 Stark sublevel of 4F3/2 state to the 4I9/2 state for crystals of [Nd(L3)2(NO3)3] (5) are discussed.

Antifungal Activity of a Neodymium-Doped Yttrium Aluminum Garnet 1,064-Nanometer Laser against Sporothrix globosa by Inducing Apoptosis and Pyroptosis via the NLRP3/Caspase-1 Signaling Pathway: In Vitro and In Vivo Study.

Sporotrichosis is a deep fungal infection caused by Sporothrix species. Currently, itraconazole is the main treatment, but fungal resistance, adverse effects, and drug interactions remain major concerns, especially in patients with immune dysfunction. Therefore, an alternative treatment is greatly in demand. This animal study aimed to investigate the inhibitory effect of neodymium-doped yttrium aluminum garnet (Nd:YAG) 1,064-nm laser treatment on Sporothrix globosa and to explore whether it happens through regulation of the Nod-like receptor thermoprotein domain-related protein 3 (NLRP3)/caspase-1 pyroptosis and apoptosis pathway. After laser irradiation, a series of studies, including assays of viability (using the cell counting kit-8 [CCK-8]), morphological structure changes, reactive oxygen species (ROS) accumulation, mitochondrial membrane potential, oxidative stress, cell cycle progression, and metacaspase activation, were conducted to estimate the effect of Nd:YAG 1,064-nm laser treatment on Sporothrix globosa cell apoptosis in vitro. For in vivo studies, mice were infected with S. globosa and then treated with laser or itraconazole, and their footpad skin lesions and the changes in the histology of tissue samples were compared. In addition, changes in the levels of NLRP3, caspase-1, and caspase-3 were assessed by immunohistochemistry, while the levels of interleukin 17 (IL-17), interferon gamma (IFN-γ), and transforming growth factor ß1 (TGF-ß1) in peripheral blood were tested by enzyme-linked immunosorbent assay (ELISA). The in vitro growth of S. globosa was inhibited and apoptosis was observed after laser treatment. According to the in vivo studies, the efficacy of the laser treatment was similar to that of itraconazole. Moreover, the NLRP3/caspase-1 pyroptosis pathway was activated, with a Th1/Th17 cell response, and the expression of caspase-3 was also upregulated. Nd:YAG 1,064-nm laser treatment can effectively inhibit the growth of S. globosa by activating fungal apoptosis and pyroptosis through the NLRP3/caspase-1 pathway. Therefore, Nd:YAG 1,064-nm laser irradiation is an alternative for sporotrichosis therapy. IMPORTANCE Nd:YAG 1,064-nm laser irradiation is a useful alternative for the treatment of sporotrichosis, especially in patients with liver dysfunction, pregnant women, and children, for whom the administration of antifungal drugs is not suitable. It may improve the overall treatment effect by shortening the duration of antifungal treatment and reducing tissue inflammation.

Near-Infrared Emissive Lanthanide Metal-Organic Frameworks for Targeted Biological Imaging and pH-Controlled Chemotherapy.

Near-infrared window II (NIR-II, 1000-1700 nm) imaging displays the advantages in deep-tissue high-contrast imaging in vivo on the strength of the high temporal-spatial resolution and deeper penetration. However, the clinical utility of NIR-II imaging agents is limited by their single function. Herein, for the first time, we report the design of a multifunctional drug delivery system (DDS) assembly, CQ/Nd-MOF@HA nanohybrids, with NIR-II fluorescence (1067 nm), large Stokes shifts, and ultrahigh quantum yield, which combined targeted NIR-II luminescence bioimaging and pH-controlled drug delivery. The nanoscale metal-organic framework (MOF) as a highly promising multifunctional DDS for targeted NIR-II bioimaging and chemotherapy in vitro and in vivo lays the foundation of the MOF-based DDS for further clinical diagnosis and treatment.

Soft fibers with magnetoelasticity for wearable electronics.

Magnetoelastic effect characterizes the change of materials' magnetic properties under mechanical deformation, which is conventionally observed in some rigid metals or metal alloys. Here we show magnetoelastic effect can also exist in 1D soft fibers with stronger magnetomechanical coupling than that in traditional rigid counterparts. This effect is explained by a wavy chain model based on the magnetic dipole-dipole interaction and demagnetizing factor. To facilitate practical applications, we further invented a textile magnetoelastic generator (MEG), weaving the 1D soft fibers with conductive yarns to couple the observed magnetoelastic effect with magnetic induction, which paves a new way for biomechanical-to-electrical energy conversion with short-circuit current density of 0.63 mA cm-2, internal impedance of 180 Ω, and intrinsic waterproofness. Textile MEG was demonstrated to convert the arterial pulse into electrical signals with a low detection limit of 0.05 kPa,  even with heavy perspiration or in underwater situations without encapsulations.

3D printable, tough, magnetic hydrogels with programmed magnetization for fast actuation.

Magnetic hydrogels have demonstrated great potential in soft robots, drug delivery, and bioengineering, and their functions are usually determined by the deforming capability. However, most magnetic hydrogels are embedded with soft magnetic particles (e.g. Fe3O4), where the magnetic domains cannot be programmed and retained under external magnetic fields. Here, we present a strategy to prepare a microgel-reinforced magnetic hydrogel, embedded with hard magnetic NdFeB particles. These magnetic hydrogels show outstanding mechanical properties (ultimate stretching ratio >15 and fracture toughness >15 000 J m-2) and fast actuation speed under external magnetic fields. We use direct ink writing to fabricate magnetic hydrogels with sophisticated geometry and program their magnetization to achieve complex deformations. Fast, reversible, shape-changing structures have been demonstrated with printed magnetic hydrogels. It is hoped that this material system of hard magnetic hydrogels can open opportunities for wide applications.

Hexameric to Trimeric Lanthanide-Included Selenotungstates and Their 2D Honeycomb Organic-Inorganic Hybrid Films Used for Detecting Ochratoxin A.

Two types of organic-inorganic hybrid structure-related lanthanide (Ln)-included selenotungstates (Ln-SeTs) [H2N(CH3)2]11Na7[Ce4(H2PTCA)2(H2O)12(HICA)]2[SeW4O17]2[W2O5]4[SeW9O33]4·64H2O (1, H3PTCA = 1,2,3-propanetricarboxylic acid, H2ICA = itaconic acid) and [H2N(CH3)2]6Na4[Ln4SeW8(H2O)14(H2PTCA)2O28] [SeW9O33]2·31H2O [Ln = Pr3+ (2), Nd3+ (3)] were obtained by Ln nature control. The primary frameworks of 1-3 are composed of trivacant Keggin-type [B-α-SeW9O33]8- and [SeW4Om]n- [Ln = Ce3+ (1), m = 17, n = 6; Ln = Pr3+ (2), Nd3+ (3), m = 18, n = 8] fragments bridged by organic ligands and Ln clusters. Intriguingly, Ln nature results in the degradation of hexameric 1 to trimeric 2-3. Besides, 1@DMDSA and 3@DMDSA composites (DMDSA·Cl = dimethyl distearylammonium chloride) were prepared through the cation exchange method, which were then reorganized to form two-dimensional (2D) honeycomb thin films by the breath figure method. Using these honeycomb thin films as electrode materials, the aptasensors were further established by utilizing methylene blue as an indicator and cDNA and Au nanoparticles as signal amplifiers to enhance the response signal so as to realize the purpose of ochratoxin A (OTA) detection. This work provides a new platform for detecting OTA and explores the application potential of POM-based composites in biological and clinical analyses.

The Influence of Nd and Sm on the Structure and Properties of Sol-Gel-Derived TiO2 Powders.

TiO2 nanopowders modified by Nd and Sm were prepared using the sol-gel technique. It was found by XRD analysis that the samples containing Sm are amorphous up to 300 °C, while those with Nd preserve a mixed organic-inorganic amorphous structure at higher temperatures (400 °C). The TiO2 (rutile) was not detected up to 700 °C in the presence of both modified oxides. TiO2 (anatase) crystals found at about 400 °C in the Sm-modified sample exhibited an average crystallite size of about 25-30 nm, while doping with Nd resulted in particles of a lower size-5-10 nm. It was established by DTA that organic decomposition is accompanied by significant weight loss occurring in the temperature range 240-350 °C. Photocatalytic tests showed that the samples heated at 500 °C possess photocatalytic activity under UV irradiation toward Malachite green organic dye. Selected compositions exhibited good antimicrobial activity against E. coli K12 and B. subtilis.

Theoretical and Experimental Vibrational Characterization of Biologically Active Nd(III) Complex.

The neodymium(III) complex of orotic acid (HOA) was synthesized and its structure determined by means of analytical and spectral analyses. Detailed vibrational analysis of HOA, sodium salt of HOA, and Nd(III)-OA systems based on both the calculated and experimental spectra confirmed the suggested metal-ligand binding mode. Significant differences in the IR and Raman spectra of the complex were observed as compared to the spectra of the ligand. The calculated vibrational wavenumbers, including IR intensities and Raman scattering activities, for the ligand and its Nd(III) complex were in good agreement with the experimental data. The vibrational analysis performed for the studied species, orotic acid, sodium salt of orotic acid, and its Nd(III) complex helped to explain the vibrational behaviour of the ligand's vibrational modes, sensitive to interaction with Nd(III). In this paper we also report preliminary results about the cytotoxicity of the investigated compounds. The cytotoxic effects of the ligand and its Nd(III) complex were determined using the MTT method on different tumour cell lines. The screening performed revealed that the tested compounds exerted cytotoxic activity upon the evaluated cell lines.

Biosafety and efficacy evaluation of a biodegradable magnesium-based drug-eluting stent in porcine coronary artery.

Although the drug-eluting stent (DES) has become the standard for percutaneous coronary intervention (PCI)-based revascularization, concerns remain regarding the use of DES, mainly due to its permanent rigid constraint to vessels. A drug-eluting bioresorbable stent (BRS) was thus developed as an alternative to DES, which can be absorbed entirely after its therapeutic period. Magnesium (Mg)-based BRSs have attracted a great deal of attention due to their suitable mechanical properties, innovative chemical features, and well-proven biocompatibility. However, the primary disadvantage of Mg-based BRSs is the rapid degradation rate, resulting in the early loss of structural support long before the recovery of vascular function. Recently, a new type of patented Mg-Nd-Zn-Zr alloy (JDBM) was developed at Shanghai Jiao Tong University to reduce the degradation rate compared to commercial Mg alloys. In the present investigation, a poly(D,L-lactic acid)-coated and rapamycin eluting (PDLLA/RAPA) JDBM BRS was prepared, and its biosafety and efficacy for coronary artery stenosis were evaluated via in vitro and in vivo experiments. The degree of smooth muscle cell adhesion to the PDLLA/RAPA coated alloy and the rapamycin pharmacokinetics of JDBM BRS were first assessed in vitro. JDBM BRS and commercial DES FIREHAWK were then implanted in the coronary arteries of a porcine model. Neointimal hyperplasia was evaluated at 30, 90, and 180 days, and re-endothelialization was evaluated at 30 days. Furthermore, Micro-CT and optical coherence tomography (OCT) analyses were performed 180 days after stent implantation to evaluate the technical feasibility, biocompatibility, and degradation characteristics of JDBM BRS in vivo. The results show the ability of a PDLLA/RAPA coated JDBM to inhibit smooth muscle cell adhesion and moderate the drug release rate of JDBM BRS in vitro. In vivo, low local and systemic risks of JDBM BRS were demonstrated in the porcine model, with preserved mechanical integrity after 6 months of implantation. We also showed that this novel BRS was associated with a similar efficacy profile compared with standard DES and high anti-restenosis performance. These findings may confer long term advantages for using this BRS over a traditional DES.