RESUMO
Heat transfer across a granular flow is comprised of two resistances in series : near the wall and within the bulk particle bed, neither of which is well understood due to the lack of experimental probes to separate their respective contribution. Here, we use a frequency modulated photothermal technique to separately quantify the thermal resistances in the near-wall and the bulk bed regions of particles in flowing states. Compared to the stationary state, the flowing leads to a higher near-wall resistance and a lower thermal conductivity of bulk beds. Coupled with discrete element method simulation, we show that the near-wall resistance can be explained by particle diffusion in granular flows.
RESUMO
Sensations of heat and touch produced by receptors in the skin are of essential importance for perceptions of the physical environment, with a particularly powerful role in interpersonal interactions. Advances in technologies for replicating these sensations in a programmable manner have the potential not only to enhance virtual/augmented reality environments but they also hold promise in medical applications for individuals with amputations or impaired sensory function. Engineering challenges are in achieving interfaces with precise spatial resolution, power-efficient operation, wide dynamic range, and fast temporal responses in both thermal and in physical modulation, with forms that can extend over large regions of the body. This paper introduces a wireless, skin-compatible interface for thermo-haptic modulation designed to address some of these challenges, with the ability to deliver programmable patterns of enhanced vibrational displacement and high-speed thermal stimulation. Experimental and computational investigations quantify the thermal and mechanical efficiency of a vertically stacked design layout in the thermo-haptic stimulators that also supports real-time, closed-loop control mechanisms. The platform is effective in conveying thermal and physical information through the skin, as demonstrated in the control of robotic prosthetics and in interactions with pressure/temperature-sensitive touch displays.
Assuntos
Tato , Realidade Virtual , Tecnologia sem Fio , Humanos , Tecnologia sem Fio/instrumentação , Tato/fisiologia , Pele , Robótica/instrumentação , Robótica/métodosRESUMO
With the increasing miniaturization and power of optoelectronic devices, direct bonding of optical substrates like semiconductors and ceramics to metal heat sinks using low melting-point solder has gained significant interest. In this study, we demonstrated the bonding of glass to copper using Sn-58 wt% Bi solder (SB solder) doped with a small amount of rare earth (RE) elements. The RE elements act as active agents that facilitate the bonding to glasses without glass metallization. By optimizing the bonding parameters, such as reflow temperature and time, and employing an inert gas atmosphere to prevent solder or RE oxidation, we successfully achieved the highest shear strength in glass-copper solder joints using SB-RE solder, without the need for ultrasonic-assisted soldering (UAS). These results demonstrate the potential of using RE-containing solder for bonding unmetallized glass and ceramics in optoelectronic devices with metals at low soldering temperatures (< 200 °C). Furthermore, analysis of the shear strength and failure morphology of solder joints revealed only small degradation, primarily originating from the bulk solder region rather than the solder-glass interface, after both thermal aging (100 h) and cycling tests (100 cycles). The establishment of low-melting point RE-containing solders opens the possibility of direct jointing ceramic optoelectronic substrates to metal heat sinks for more efficient heat dissipation. In the meantime, our work also suggests that further optimization studies are necessary to explore its performance under more extreme working conditions.
RESUMO
Heat conduction in solids is typically governed by the Fourier's law describing a diffusion process due to the short wavelength and mean free path for phonons and electrons. Surface phonon polaritons couple thermal photons and optical phonons at the surface of polar dielectrics, possessing much longer wavelength and propagation length, representing an excellent candidate to support extraordinary heat transfer. Here, we realize clear observation of thermal conductivity mediated by surface phonon polaritons in SiO2 nanoribbon waveguides of 20-50 nm thick and 1-10 µm wide and also show non-Fourier behavior in over 50-100 µm distance at room and high temperature. This is enabled by rational design of the waveguide to control the mode size of the surface phonon polaritons and its efficient coupling to thermal reservoirs. Our work laid the foundation for manipulating heat conduction beyond the traditional limit via surface phonon polaritons waves in solids.
RESUMO
Fibers capable of generating axial contraction are commonly seen in nature and engineering applications. Despite the broad applications of fiber actuators, it is still very challenging to fabricate fiber actuators with combined large actuation strain, fast response speed, and high power density. Here, we report the fabrication of a liquid crystal elastomer (LCE) microfiber actuators using a facile electrospinning technique. Owing to the extremely small size of the LCE microfibers, they can generate large actuation strain (~60 percent) with a fast response speed (<0.2 second) and a high power density (400 watts per kilogram), resulting from the nematic-isotropic phase transition of liquid crystal mesogens. Moreover, no performance degradation is detected in the LCE microfibers after 106 cycles of loading and unloading with the maximum strain of 20 percent at high temperature (90 degree Celsius). The small diameter of the LCE microfiber also results in a self-oscillatory behavior in a steady temperature field. In addition, with a polydopamine coating layer, the actuation of the electrospun LCE microfiber can be precisely and remotely controlled by a near-infrared laser through photothermal effect. Using the electrospun LCE microfiber actuator, we have successfully constructed a microtweezer, a microrobot, and a light-powered microfluidic pump.
RESUMO
Fascinating phenomena can occur as charge and/or energy carriers are confined in one dimension1-4. One such example is the divergent thermal conductivity (κ) of one-dimensional lattices, even in the presence of anharmonic interatomic interactions-a direct consequence of the Fermi-Pasta-Ulam-Tsingou paradox proposed in 19555. This length dependence of κ, also known as superdiffusive phonon transport, presents a classical anomaly of continued interest6-9. So far the concept has remained purely theoretical, because isolated single atomic chains of sufficient length have been experimentally unattainable. Here we report on the observation of a length-dependent κ extending over 42.5 µm at room temperature for ultrathin van der Waals crystal NbSe3 nanowires. We found that κ follows a 1/3 power law with wire length, which provides experimental evidence pointing towards superdiffusive phonon transport. Contrary to the classical size effect due to phonon-boundary scattering, the observed κ shows a 25-fold enhancement as the characteristic size of the nanowires decreases from 26 to 6.8 nm while displaying a normal-superdiffusive transition. Our analysis indicates that these intriguing observations stem from the transport of one-dimensional phonons excited as a result of elastic stiffening with a fivefold enhancement of Young's modulus. The persistent divergent trend of the observed thermal conductivity with sample length reveals a real possibility of creating novel van der Waals crystal-based thermal superconductors with κ values higher than those of any known materials.
RESUMO
Thermal rectification is an exotic thermal transport phenomenon which allows heat to transfer in one direction but block the other. We demonstrate an unusual dual-mode solid-state thermal rectification effect using a heterogeneous "irradiated-pristine" polyethylene nanofiber junction as a nanoscale thermal diode, in which heat flow can be rectified in both directions by changing the working temperature. For the nanofiber samples measured here, we observe a maximum thermal rectification factor as large as ~50%, which only requires a small temperature bias of <10 K. The tunable nanoscale thermal diodes with large rectification and narrow temperature bias open up new possibilities for developing advanced thermal management, energy conversion and, potentially thermophononic technologies.
RESUMO
Non-invasive and label-free calorimetry could become a disruptive technique to study single cell metabolic heat production without altering the cell behavior, but it is currently limited by insufficient sensitivity. Here, we demonstrate microfluidic single-cell calorimetry with 0.2-nW sensitivity, representing more than ten-fold enhancement over previous record, which is enabled by (i) a low-noise thermometry platform with ultralow long-term (10-h) temperature noise (80 µK) and (ii) a microfluidic channel-in-vacuum design allowing cell flow and nutrient delivery while maintaining a low thermal conductance of 2.5 µW K-1. Using Tetrahymena thermophila as an example, we demonstrate on-chip single-cell calorimetry measurement with metabolic heat rates ranging from 1 to 4 nW, which are found to correlate well with the cell size. Finally, we perform real-time monitoring of metabolic rate stimulation by introducing a mitochondrial uncoupling agent to the microchannel, enabling determination of the spare respiratory capacity of the cells.
Assuntos
Calorimetria/métodos , Técnicas Analíticas Microfluídicas/métodos , Microfluídica/métodos , Análise de Célula Única/métodos , Temperatura , Tetrahymena thermophila/metabolismo , Metabolismo Basal , Calorimetria/instrumentação , Microfluídica/instrumentação , Mitocôndrias/metabolismo , Consumo de Oxigênio , Análise de Célula Única/instrumentação , Tetrahymena thermophila/citologia , Condutividade TérmicaRESUMO
In comparison with the advancement of switchable, nonlinear, and active components in electronics, solid-state thermal components for actively controlling heat flow have been extremely rare. We demonstrate a high-contrast and reversible polymer thermal regulator based on the structural phase transition in crystalline polyethylene nanofibers. This structural phase transition represents a dramatic change in morphology from a highly ordered all-trans conformation to a combined trans and gauche conformation with rotational disorder, leading to an abrupt change in phonon transport along the molecular chains. For five nanofiber samples measured here, we observe an average thermal switching ratio of ~8× and maximum switching ratio of ~10×, which occurs in a narrow temperature range of 10 K across the structural phase transition. To the best of our knowledge, the ~10× switching ratio exceeds any reported experimental values for solid-solid and solid-liquid phase transitions of materials. There is no thermal hysteresis observed upon heating/cooling cycles.
RESUMO
Thermoregulation has substantial implications for energy consumption and human comfort and health. However, cooling technology has remained largely unchanged for more than a century and still relies on cooling the entire space regardless of the number of occupants. Personalized thermoregulation by thermoelectric devices (TEDs) can markedly reduce the cooling volume and meet individual cooling needs but has yet to be realized because of the lack of flexible TEDs with sustainable high cooling performance. Here, we demonstrate a wearable TED that can deliver more than 10°C cooling effect with a high coefficient of performance (COP > 1.5). Our TED is the first to achieve long-term active cooling with high flexibility, due to a novel design of double elastomer layers and high-ZT rigid TE pillars. Thermoregulation based on these devices may enable a shift from centralized cooling toward personalized cooling with the benefits of substantially lower energy consumption and improved human comfort.
RESUMO
The field of thermoelectric research has undergone a renaissance and boom in the past two and a half decades, largely fueled by the prospect of engineering electronic and phononic properties in nanostructures, among which semiconductor nanowires (NWs) have served both as an important platform to investigate fundamental thermoelectric transport phenomena and as a promising route for high thermoelectric performance for diverse applications. In this Review, we provide a comprehensive look at various aspects of thermoelectrics of NWs. We start with a brief introduction of basic thermoelectric phenomena, followed by synthetic methods for thermoelectric NWs and a summary of their thermoelectric figures of merit (ZT). We then focus our discussion on charge and heat transport, which dictate thermoelectric power factor and thermal conductivity, respectively. For charge transport, we cover the basic principles governing the power factor and then review several strategies using NWs to enhance it, including earlier theoretical and experimental work on quantum confinement effects and semimetal-to-semiconductor transition, surface engineering and complex heterostructures to enhance the carrier mobility and power factor, and the recent emergence of topological insulator NWs. For phonon transport, we broadly categorize the work on thermal conductivity of NWs into five different effects: classic size effect, acoustic softening, surface roughness, complex NW morphology, and dimensional crossover. Finally, we discuss the integration of NWs for device applications for thermoelectric power generation and cooling. We conclude our review with some outlooks for future research.
RESUMO
Coherent thermal emission deviates from the Planckian blackbody emission with a narrow spectrum and strong directionality. While far-field thermal emission from polaritonic resonance has shown the deviation through modelling and optical characterizations, an approach to achieve and directly measure dominant coherent thermal emission has not materialised. By exploiting the large disparity in the skin depth and wavelength of surface phonon polaritons, we design anisotropic SiO2 nanoribbons to enable independent control of the incoherent and coherent behaviours, which exhibit over 8.5-fold enhancement in the emissivity compared with the thin-film limit. Importantly, this enhancement is attributed to the coherent polaritonic resonant effect, hence, was found to be stronger at lower temperature. A thermometry platform is devised to extract, for the first time, the thermal emissivity from such dielectric nanoemitters with nanowatt-level emitting power. The result provides new insight into the realisation of spatial and spectral distribution control for far-field thermal emission.
RESUMO
Aqueous batteries with zinc metal anodes are promising alternatives to Li-ion batteries for grid storage because of their abundance and benefits in cost, safety, and nontoxicity. However, short cyclability due to zinc dendrite growth remains a major obstacle. Here, we report a cross-linked polyacrylonitrile (PAN)-based cation exchange membrane that is low cost and mechanically robust. Li2S3 reacts with PAN, simultaneously leading to cross-linking and formation of sulfur-containing functional groups. Hydrolysis of the membrane results in the formation of a membrane that achieves preferred cation transport and homogeneous ionic flux distribution. The separator is thin (30 µm-thick), almost 9 times stronger than hydrated Nafion, and made of low-cost materials. The membrane separator enables exceptionally long cyclability (>350 cycles) of Zn/Zn symmetric cells with low polarization and effective dendrite suppression. Our work demonstrates that the design of new separators is a fruitful pathway to enhancing the cyclability of aqueous batteries.
RESUMO
Phase change heat transfer is fundamentally important for thermal energy conversion and management, such as in electronics with power density over 1 kW/cm2. The critical heat flux (CHF) of phase change heat transfer, either evaporation or boiling, is limited by vapor flux from the liquid-vapor interface, known as the upper limit of heat flux. This limit could in theory be greater than 1 kW/cm2 on a planar surface, but its experimental realization has remained elusive. Here, we utilized nanoporous membranes to realize a new "thin film boiling" regime that resulted in an unprecedentedly high CHF of over 1.2 kW/cm2 on a planar surface, which is within a factor of 4 of the theoretical limit, and can be increased to a higher value if mechanical strength of the membranes can be improved (demonstrated with 1.85 kW/cm2 CHF in this work). The liquid supply is achieved through a simple nanoporous membrane that supports the liquid film where its thickness automatically decreases as heat flux increases. The thin film configuration reduces the conductive thermal resistance, leads to high frequency bubble departure, and provides separate liquid-vapor pathways, therefore significantly enhances the heat transfer. Our work provides a new nanostructuring approach to achieve ultrahigh heat flux in phase change heat transfer and will benefit both theoretical understanding and application in thermal management of high power devices of boiling heat transfer.
RESUMO
Printing techniques could offer a scalable approach to fabricate thermoelectric (TE) devices on flexible substrates for power generation used in wearable devices and personalized thermo-regulation. However, typical printing processes need a large concentration of binder additives, which often render a detrimental effect on electrical transport of the printed TE layers. Here, we report scalable screen-printing of TE layers on flexible fiber glass fabrics, by rationally optimizing the printing inks consisting of TE particles (p-type Bi0.5Sb1.5Te3 or n-type Bi2Te2.7Se0.3), binders, and organic solvents. We identified a suitable binder additive, methyl cellulose, which offers suitable viscosity for printability at a very small concentration (0.45-0.60 wt.%), thus minimizing its negative impact on electrical transport. Following printing, the binders were subsequently burnt off via sintering and hot pressing. We found that the nanoscale defects left behind after the binder burnt off became effective phonon scattering centers, leading to low lattice thermal conductivity in the printed n-type material. With the high electrical conductivity and low thermal conductivity, the screen-printed TE layers showed high room-temperature ZT values of 0.65 and 0.81 for p-type and n-type, respectively.
RESUMO
Two kinds of humidity-induced, bendable smart clothing have been designed to reversibly adapt their thermal insulation functionality. The first design mimics the pores in human skin, in which pre-cut flaps open to produce pores in Nafion sheets when humidity increases, as might occur during human sweating thus permitting air flow and reducing both the humidity level and the apparent temperature. Like the smart human sweating pores, the flaps can close automatically after the perspiration to keep the wearer warm. The second design involves thickness adjustable clothes by inserting the bent polymer sheets between two fabrics. As the humidity increases, the sheets become thinner, thus reducing the gap between the two fabrics to reduce the thermal insulation. The insulation layer can recover its original thickness upon humidity reduction to restore its warmth-preservation function. Such humidity sensitive smart polymer materials can be utilized to adjust personal comfort, and be effective in reducing energy consumption for building heating or cooling with numerous smart design.
Assuntos
Regulação da Temperatura Corporal , Vestuário , Umidade , HumanosRESUMO
Amorphous Si (a-Si) nanostructures are ubiquitous in numerous electronic and optoelectronic devices. Amorphous materials are considered to possess the lower limit to the thermal conductivity (κ), which is â¼1 W·m-1 K-1 for a-Si. However, recent work suggested that κ of micrometer-thick a-Si films can be greater than 3 W·m-1 K-1, which is contributed to by propagating vibrational modes, referred to as "propagons". However, precise determination of κ in a-Si has been elusive. Here, we used structures of a-Si nanotubes and suspended a-Si films that enabled precise in-plane thermal conductivity (κâ¥) measurement within a wide thickness range of 5 nm to 1.7 µm. We showed unexpectedly high κ⥠in a-Si nanostructures, reaching â¼3.0 and 5.3 W·m-1 K-1 at â¼100 nm and 1.7 µm, respectively. Furthermore, the measured κ⥠is significantly higher than the cross-plane κ on the same films. This unusually high and anisotropic thermal conductivity in the amorphous Si nanostructure manifests the surprisingly broad propagon mean free path distribution, which is found to range from 10 nm to 10 µm, in the disordered and atomically isotropic structure. This result provides an unambiguous answer to the century-old problem regarding mean free path distribution of propagons and also sheds light on the design and performance of numerous a-Si based electronic and optoelectronic devices.
RESUMO
We show that amorphous silica and Si nanotubes can flow at room temperature under Giga-Pascal order stress when going to the nanometer scale. This creep behavior is unique for the amorphous nanotubes and is absent in crystalline Si nanotubes of similar dimensions. A core-shell model shows that there exists an approximately 1 nm thick viscoelastic "fluid-like" surface layer, which exhibits a room temperature viscosity equivalent to that of bulk glass above 1000 °C.
RESUMO
In this work, vertically aligned Si nanowire arrays were fabricated by magnetically guided metal-assisted directional chemical etching. Using an anodized aluminum oxide template as a shadow mask, nanoscale Ni dot arrays were fabricated on an Si wafer to serve as a mask to protect the Si during the etching. For the magnetically guided chemical etching, we deposited a tri-layer metal catalyst (Au/Fe/Au) in a Swiss-cheese configuration and etched the sample under the magnetic field to improve the directionality of the Si nanowire etching and increase the etching rate along the vertical direction. After the etching, the nanowires were dried with minimal surface-tension-induced aggregation by utilizing a supercritical CO2 drying procedure. High-resolution transmission electron microscopy (HR-TEM) analysis confirmed the formation of single-crystal Si nanowires. The method developed here for producing vertically aligned Si nanowire arrays could find a wide range of applications in electrochemical and electronic devices.
RESUMO
Reducing semiconductor materials to sizes comparable to the characteristic lengths of phonons, such as the mean-free-path (MFP) and wavelength, has unveiled new physical phenomena and engineering capabilities for thermal energy management and conversion systems. These developments have been enabled by the increasing sophistication of chemical synthesis, microfabrication, and atomistic simulation techniques to understand the underlying mechanisms of phonon transport. Modifying thermal properties by scaling physical size is particularly effective for materials which have large phonon MFPs, such as crystalline Si and Ge. Through nanostructuring, materials that are traditionally good thermal conductors can become good candidates for applications requiring thermal insulation such as thermoelectrics. Precise understanding of nanoscale thermal transport in Si and Ge, the leading materials of the modern semiconductor industry, is increasingly important due to more stringent thermal conditions imposed by ever-increasing complexity and miniaturization of devices. Therefore this Minireview focuses on the recent theoretical and experimental developments related to reduced length effects on thermal transport of Si and Ge with varying size from hundreds to sub-10 nm ranges. Three thermal transport regimes - bulk-like, Casimir, and confinement - are emphasized to describe different governing mechanisms at corresponding length scales.