Occurrence of Campylobacter, Listeria monocytogenes, and extended-spectrum beta-lactamase Escherichia coli in slaughterhouses before and after cleaning and disinfection.

To prevent foodborne illness, adequate cleaning and disinfection (C&D) is essential to remove pathogenic bacteria from the slaughter environment. The aim of this study was to determine the presence of Campylobacter spp., Listeria monocytogenes, and extended-spectrum beta-lactamase-producing Escherichia coli (ESBL E. coli) before and after C&D in slaughterhouses. Samples from food- and non-food contact surfaces taken before and after C&D in one red meat and one poultry slaughterhouse were analyzed for the target bacteria. Whole-genome sequencing and antimicrobial susceptibility testing were performed. In total, 484 samples were analyzed. Campylobacter spp. were isolated from 13.0% to 15.5% of samples before C&D in the red meat and poultry slaughterhouse, respectively. Listeria monocytogenes was isolated before C&D in 12.5% and 5.2% of samples in the red meat and poultry slaughterhouse, respectively. It was noted that C. jejuni was detected on multiple surfaces and that L. monocytogenes showed potential persistence in one slaughterhouse. After C&D, L. monocytogenes was found in one sample. ESBL E. coli was not detected either before or after C&D. These findings show the possibility to remove pathogenic bacteria from slaughter and meat processing facilities, but also indicate that deficiencies in slaughter hygiene pose a risk of cross-contamination of meat.

Environmental monitoring of Nebraska ready-to-eat meat processing establishments resulted in the isolation of Listeria alongside Pseudomonas highly resistant to quaternary ammonia sanitizer.

Robust environmental monitoring for Listeria monocytogenes often may not be feasible for small and very small meat processors in the United States due to limitations in finances, staffing, or expertise. Three small/very small processors in Nebraska were sampled using sponge applicators in non-food contact surface areas to determine if biofilm and sanitizer resistance behaviors of Pseudomonas could relate to the prevalence of L. monocytogenes and Listeria spp. in ready-to-eat meat processing environments. Samples were 3.3% (3/90) positive for L. monocytogenes, and 12.2% (11/90) of samples were positive for Listeria spp. Pseudomonas spp. were also isolated. When Listeria spp. and Pseudomonas spp. were assayed for biofilm production and resistance to a quaternary ammonia sanitizer, multiple isolates belonging to both genera capable of forming biofilms were identified. Four Pseudomonas spp. isolates resisted the 200 ppm manufacturer recommended sanitizer concentration for food contact surface sanitation, and one Pseudomonas spp. isolated from a drain sample that was also positive for L. monocytogenes demonstrated a sanitizer minimum bactericidal concentration of 1000 ppm. These findings further support the need for monitoring of small and very small meat processors for L. monocytogenes as well as highlight the need to identify other bacteria in these processing environments, like Pseudomonas, that are resistant to environmental stressors.

Mitigating COVID-19 in meat processing plants: what have we learned from cluster investigations?

Introduction: Several COVID-19 outbreaks have been reported in meat processing plants in different countries. The aim of this study was to assess the environmental and socio-economic risk factors favouring the transmission of SARS-CoV-2 in meat processing plants and to describe the prevention measures implemented. Methods: Data from epidemiological investigations of COVID-19 clusters in France, the scientific literature, structured interviews and site visits were collected and summarised to investigate the main risk factors for SARS-CoV-2 infection in meat processing plants, including determinants within and outside the workplace. Results: An increased risk of infection was identified among workers with unfavourable socio-economic status (temporary/non-permanent workers, migrants, ethnic minorities, etc.), possibly related to community activities (house-sharing, car-sharing, social activities). Working conditions (proximity between workers) and environmental factors (low temperatures and inadequate ventilation) also appear to be important risk factors. These environmental conditions are particularly prevalent in cutting and boning plants, where the majority of reported cases are concentrated. Preventive measures applied included screening for COVID-19 symptoms, testing, wearing masks, increased hygiene and sanitation, physical and temporal distancing, control of ventilation. Certain food safety hygiene measures were compatible with protecting workers from SARS-CoV-2. The hygiene culture of agri-food workers made it easier to implement preventive measures after adaptation. Conclusion: This study made it possible to identify the environmental and socio-economic factors conducive to the transmission of SARS-CoV-2 in meat processing plants. The knowledge gained from this work was used in simulations to understand the transmission of the virus in the plants.

Meat products in human nutrition and health - About hazards and risks.

Meat processing has a long history and involves a wide and ever-increasing range of chemical and physical processes, resulting in a heterogeneous food category with a wide variability in nutritional value. Despite the known benefits of meat consumption, observational epidemiological studies have shown associations between consumption of red and processed meat - but not white meat - and several non-communicable diseases, with higher relative risks for processed meat compared to unprocessed red meat. This has led global and regional nutrition and health organisations to recommend reducing consumption of unprocessed red meat and avoiding processed meat. A plethora of potentially implicated hazardous compounds present in meat or formed during processing or gastrointestinal digestion have been reported in the literature. However, our mechanistic understanding of the impact of meat consumption on human health is still very incomplete and is complicated by the simultaneous occurrence of multiple hazards and interactions with other food compounds and host factors. This narrative review briefly discusses hazards, risks and their assessment in the context of dietary guidelines. It is argued that more mechanistic studies of the interactive effects of meat products with other foods and food compounds in different dietary contexts are needed to refine and increase the evidence base for dietary guidelines. Importantly, the great diversity in the composition and degree of processing of processed meats should be better understood in terms of their impact on human health in order to develop a more nuanced approach to dietary guidelines for this food category.

Start of the Season in a Seasonal Work Context: A Better Understanding of the Difficulties Experienced by Seasonal Workers in the Food Processing Industry for the Prevention of Work-Related Musculoskeletal Disorders.

The specific period of the start of a new working season and a return to work after the off-season seems to be a critical moment for the musculoskeletal health of seasonal workers. This study aims to identify the difficulties and working conditions encountered by seasonal workers in this particular period of the working season which may increase the risk of work-related musculoskeletal disorders (WMSDs). An in-depth ergonomic work activity study, combined with a multiple case study of eight seasonal workers from a meat processing facility, was conducted. Various interviews (n = 24) and observations of work activity, organization, and production (n = 96 h) were held at different moments (off-season, return to work at the start of the season, and during the season). Critical work situations exposing workers to WMSD risks emerged and highlighted a diversity of difficulties, such as accomplishing work activity involving strong physical strain and a significant and underestimated mental load, and having to rapidly develop new skills or re-learn working strategies after a long off-period. The study findings have implications for developing actions to prevent WMSDs that target working conditions and support a return to work for returning seasonal workers and a start of work for new seasonal workers, and to address work disability in this context.

Sensor-Enhanced Smart Gripper Development for Automated Meat Processing.

Grasping and object manipulation have been considered key domains of Cyber-Physical Systems (CPS) since the beginning of automation, as they are the most common interactions between systems, or a system and its environment. As the demand for automation is spreading to increasingly complex fields of industry, smart tools with sensors and internal decision-making become necessities. CPS, such as robots and smart autonomous machinery, have been introduced in the meat industry in recent decades; however, the natural diversity of animals, potential anatomical disorders and soft, slippery animal tissues require the use of a wide range of sensors, software and intelligent tools. This paper presents the development of a smart robotic gripper for deployment in the meat industry. A comprehensive review of the available robotic grippers employed in the sector is presented along with the relevant recent research projects. Based on the identified needs, a new mechatronic design and early development process of the smart gripper is described. The integrated force sensing method based on strain measurement and magnetic encoders is described, including the adjacent laboratory and on-site tests. Furthermore, a combined slip detection system is presented, which relies on an optical flow-based image processing algorithm using the video feed of a built-in endoscopic camera. Basic user tests and application assessments are presented.

Microbial community changes and metabolic pathways analysis during waste activated sludge and meat processing waste anaerobic co-digestion.

Waste activated sludge (WAS) and meat processing waste (MPW) were acted as co-substrates in anaerobic co-digestion (AcD), and biochemical methane potential (BMP) test was carried out to investigate the methane production performances. Microbial community structure and metabolic pathways analyses were conducted by 16S rRNA high-throughput sequencing and functional prediction analysis. BMP test results indicated that AcD of 70% WAS+30% MPW and 50% WAS+50% MPW (VS/VS) could significantly improve methane yield to 371.05 mL/g VS and 599.61 mL/g VS, respectively, compared with WAS acting as sole substrate (191.87 mL/g VS). The results of microbial community analysis showed that Syntrophomonas and Petrimonas became the dominant bacteria genera, and Methanomassiliicoccus and Methanobacterium became the dominant archaea genera after MPW addition. 16S functional prediction analysis results indicated that genes expression of key enzymes involved in syntrophic acetate oxidation (SAO), hydrogenotrophic and methylotrophic methanogenesis were up-regulated, and acetoclastic methanogenesis was inhibited after MPW addition. Based on these analyses, it could be inferred that SAO combined with hydrogenotrophic and methylotrophic methanogenesis was the dominant pathway for organics degradation and methane production during AcD. These findings provided systematic insights into the microbial community changes and metabolic pathways during AcD of WAS and MPW.

COVID-19 transmission between the community and meat processing plants in Ireland: A retrospective modelling study.

Outbreaks of COVID-19 in meat processing plants (MPPs) were recorded globally throughout the pandemic. There was speculation these outbreaks resulted in dissemination of COVID-19 throughout the surrounding county leading to high incidence rates. We aimed to investigate the dynamics of spread between MPPs and their surrounding counties. In this retrospective longitudinal study, data were collected on the number and size of outbreaks in 33 MPPs and county infections in Ireland between March 2020 and May 2021. These data were used to investigate the relationship between outbreaks in MPPs and county infection rates through statistical analysis, and the development of a novel SEIR model. We found an association between the number of MPPs present in a county and county incidence rates, however, incidence rates in the counties did not increase as a consequence of an outbreak in an MPP. The model results indicate that county incidence rates in the weeks prior to an MPP outbreak could reliably predict the size of that outbreak in a plant, r(49) = 0·62, p < 0·0001, RMSD = 5·6. In Ireland, outbreaks in MPPs were strongly correlated with high levels of infection in the surrounding county, rather than being a driver of infection in the county. The modified SEIR model described here can provide an explanation of the generative process required to cause outbreaks of the size and scale that occur in MPPs.

AMP, ADP, and ATP Concentrations Differentially Affected by Meat Processing, Manufacturing, and Nonmeat Ingredients.

Given its presence in a wide spectrum of soils relevant to food process hygiene, the biological metabolite adenosine triphosphate (ATP) is used as a target for surface hygiene assessments in food processing facilities. Yet, ample evidence demonstrates that ATP is depleted into adenosine di- (ADP) and monophosphate (AMP) homologs resulting in a loss of sensitivity for ATP-based hygiene assays. Yet, there are few studies that denote the degree of these shifts under routine processing conditions such as those encountered during various meat processing steps that may likely alter redox potential and adenosine profiles (e.g., tissue/cellular disruption, application of reducing additives, fermentation, or thermal treatment steps). In this study, meat samples were collected from homogenized beef tissue treated with nonmeat ingredients (sodium chloride, sodium nitrite, sodium erythorbate, natural smoke condensate, and sodium acid pyrophosphate) during manufacture at predetermined steps, and from retail meat products purchased from local markets. Concentrations of ATP, ADP, AMP, and AXP (sum concentration of all homologs) in a lab setting and in situ meat processing venues were determined and compared. Greater differences in AXP were seen during manufacture, where ADP generally comprised ∼90% as a mole fraction of AXP across all treatments, with the exception of the final cook step where AMP predominated. ATP concentrations averaged 2 log values lower than ADP and AMP. Adenosine profiles in retail samples followed similar trends with minimal ATP concentrations with ADP predominant in uncooked samples and AMP predominant in cooked samples. Resultingly, meat processing steps during product manufacture will alter AXP-reliant test sensitivities which should be considered when such technologies are utilized for hygiene verification in meat processing.

Evaluating disinfectant efficacy on mixed biofilms comprising Shiga toxigenic Escherichia coli, lactic acid bacteria, and spoilage microorganisms.

This study aimed to investigate the impact of temperature and the presence of other microorganisms on the susceptibility of STEC to biocides. Mature biofilms were formed at both 10°C and 25°C. An inoculum of planktonic bacteria comprising 106 CFU/mL of spoilage bacteria and 103 CFU/mL of a single E. coli strain (O157, O111, O103, and O12) was used to form mixed biofilms. The following bacterial combinations were tested: T1: Carnobacterium piscicola + Lactobacillus bulgaricus + STEC, T2: Comamonas koreensis + Raoultella terrigena + STEC, and T3: Pseudomonas aeruginosa + C. koreensis + STEC. Tested biocides included quaternary ammonium compounds (Quats), sodium hypochlorite (Shypo), sodium hydroxide (SHyd), hydrogen peroxide (HyP), and BioDestroy®-organic peroxyacetic acid (PAA). Biocides were applied to 6-day-old biofilms. Minimum Bactericidal Concentrations (MBC) and Biofilm Eradication Concentrations (BEC) were determined. Planktonic cells and single-species biofilms exhibited greater susceptibility to sanitizers (p < 0.0001). Lactobacillus and Carnobacterium were more susceptible than the rest of the tested bacteria (p < 0.0001). Single species biofilms formed by E. coli O111, O121, O157, and O45 showed resistance (100%) to Shypo sanitizer (200 ppm) at 25°C. From the most effective to the least effective, sanitizer performance on single-species biofilms was PAA > Quats > HyP > SHyd > Shypo. In multi-species biofilms, spoilage bacteria within T1, T2, and T3 biofilms showed elevated resistance to SHyd (30%), followed by quats (23.25%), HyP (15.41%), SHypo (9.70%), and BioDestroy® (3.42%; p < 0.0001). Within T1, T2, and T3, the combined STEC strains exhibited superior survival to Quats (23.91%), followed by HyP (19.57%), SHypo (18.12%), SHyd (16.67%), and BioDestroy® (4.35%; p < 0.0001). O157:H7-R508 strains were less tolerant to Quats and Shypo when combined with T2 and T3 (p < 0.0001). O157:H7 and O103:H2 strains in mixed biofilms T1, T2, and T3 exhibited higher biocide resistance than the weak biofilm former, O145:H2 (p < 0.0001). The study shows that STEC within multi-species biofilms' are more tolerant to disinfectants.

An overlooked compound contributing to boar taint and consumer rejection of meat products: 2-Aminoacetophenone.

Mainly skatole and androstenone have so far been considered causative for boar taint. Using a mixed methods approach it is shown herein that 2-aminoacetophenone (AAP) affects human perception of pork, too. We explored the importance of AAP in four trials: (1) chemical analyses of 221 fat samples from boar carcasses revealed that AAP occurs, on average, in similar quantities as skatole while the levels of androstenone being four-fold. (2) ranking tests with mixtures of androstenone and/or skatole with AAP presented on smell strips to trained sensory assessors showed that AAP amplifies boar odour. In order to study AAP's importance in meat products, four experimental variants of Lyon type sausage were then produced: a control, a product with added skatole (0.075 µg/g fat tissue), with added AAP (0.075 µg/g fat tissue), and with addition of both compounds. (3) results of a consumer discrimination test panel (n = 71) showed that, when added to a sausage system, APP causes a sensory difference of similar size as skatole while the methodology chosen affects the effect size: tetrad tests proved to be more sensitive than duo trio difference tests, in the tetrad test a sensory difference expressed as d' (d-prime) of 1.0 was reached. (4) a hedonic consumer test (n = 121) finally revealed that APP decreased consumer liking of the APP-spiked sausage - even to a stronger extent than skatole. APP caused significant drops in smell, taste, mouth-feel, after-taste and overall liking in Lyoner. Overall the findings suggest that, in the context of pork meat, AAP is of similar olfactory importance as skatole.

Epidemiology of multidrug-resistant zoonotic E. coli from beef processing and retail points in Delta State, Nigeria: Public health implications.

Some sorbitol non-fermenting E. coli (SN-F E. coli) and all E. coli O157 are zoonotic. Contamination of beef with zoonotic E. coli at the processing or retail point is a significant public health problem. Despite the public health importance of these organisms, there is no published data on the prevalence and antimicrobial resistance (AMR) of zoonotic E. coli from Delta State, Nigeria. Consequently, this study determined the prevalence and AMR of SN-F E. coli and E. coli O157 isolates from meat contact surfaces at the processing and retail points in the study area. The isolation, biochemical and serological characterisations and AMR status of the isolates were performed following standard microbiological methods. Overall prevalence of SN-F E. coli and E. coli O157 were 13.8% (56/406) and 1.5% (6/406), respectively. Majority of the 56 SN-F E. coli (64.3%, 36/56) and all the six E. coli O157 (10.7%, 6/56) detected in this study were found at the meat processing points. Most of the SN-F E. coli were isolated at the slaughterhouse floor (31%), meat hooks (17.2%) and meat sellers' knives (17.2%). The SN-F E. coli exhibited greater AMR to ampicillin (67.9%), gentamycin (64.3%) and tetracycline (50%) than other antimicrobial agents tested. No isolate was resistant to aztreonam. All six E. coli O157 isolates were resistant to enrofloxacin. Overall, 23 AMR patterns, comprised 14 from meat processing points and nine from meat retailing points, were observed from the 56 antimicrobial-resistant SN-F E. coli isolates. All the six E. coli O157 and 73.2% (41/56) of the SN-F E. coli isolates were multidrug-resistant. An overall mean multiple antimicrobial resistance index of 0.6 was recorded. Multidrug-resistant zoonotic E. coli were detected at meat processing and retail points in Delta State, Nigeria. The findings warrant the adoption of One Health control approach, "farm to fork" principle of food safety and prudent use of antimicrobial agents in animal agriculture. These may help to limit beef contamination with multidrug-resistant zoonotic E. coli at the processing and retailing points, for public health safety.

Added insult to injury? The response of meat-associated pathogens to proposed antimicrobial interventions.

Modern requirements for 'green label' meat products have led to the design of novel antimicrobial innovations which prioritise quality, safety and longevity. Plasma-functionalised water (PFW), ultraviolet light and natural antimicrobial compositions have been investigated and optimised for control of foodborne pathogens like Campylobacter jejuni and Salmonella enterica serovar Typhimurium. However, given the adaptive mechanisms present in bacteria under external stresses, it is imperative to understand the effect that sublethal treatment may have on the bacterial transcriptome. In this study, Salmonella Typhimurium and C. jejuni were treated with sublethal doses of ultraviolet light, a citrus juice/essential oil marinade, and 'spark' or 'glow' cold plasma generation system-produced PFW. Immediately after treatment, cells were lysed and RNA was extracted and purified. mRNA was converted to cDNA by reverse transcription-PCR and sequenced by an Illumina MiSeq® system. Sequences were filtered and analysed using the Tuxedo workflow. Sublethal treatment of Campylobacter jejuni and Salmonella Typhimurium led to increased immediate cellular and metabolic activity, as well as diversification in protein and metabolic functioning. There was further expression of pathogenesis and virulence-associated traits associated with spark PFW and marinade treatment of Salmonella Typhimurium. However, similar concerns were not raised with glow PFW or UV-treated samples. This study provides science-based evidence of the efficacy of multi-hurdle antimicrobial system using green-label marinades and PFW or UV to inactivate pathogens without upregulating virulence traits in surviving cells. This study will inform policymakers and food industry stakeholders and reinforces the need to incorporate in-line novel technologies to ensure consumer safety. KEY POINTS: • Salmonella and C. jejuni showed increased cell activity in immediate response to stress. • Virulence genes showed increased expression when treated with natural antimicrobials and sPFW. • Reduced immediate transcriptomic response to gPFW and UV treatment indicates lower risk.

Descriptive analysis of the most common types of food safety infractions at ready-to-eat meat processing plants in Ontario, Canada.

Food safety inspections of meat processing plants and abattoirs that process ready-to-eat (RTE) meats have identified a lack of compliance with good manufacturing practices. This study was undertaken to identify common food safety infractions in the RTE meat processing sector in Ontario through an analysis of historical audit records. A total of 376,457 audit item results were evaluated across 912 unique audits of 204 different RTE meat plants. A nearly two-thirds overall item pass rate (64.4%; n = 242,478) was identified. Across all other risk categories, the highest rates of infractions were observed in the "maintenance of premises, equipment and utensils" (56.7%; n = 750). The overall item pass rate was higher in free-standing meat processing plants than abattoirs, while pass rates gradually decreased across the study period. The results of this study have identified key areas for improvement in future inspection, audit and outreach with RTE meat processing plants.

Effect of alkaline pre-treatment on hydrolysis rate and methane production during anaerobic digestion of paunch solid waste.

Paunch is comprised of the partially digested feed contained in cattle or sheep and contributes 20-50% of organic waste produced at red meat processing facilities. Anaerobic digestion has been identified as a promising technology for paunch treatment, however treatment times can be long and when combined with the moderate degradability of paunch this results in high treatment costs that need to be improved. Pre-treatment was investigated as a strategy to improve AD of paunch, alkaline treatment (NaOH or KOH) was selected due to the high lignin content. A range of alkaline loadings (1-20 g 100gTS-1) were tested with an equivalent hydroxide molar concentration of 9-250 mM [OH-]. Alkaline pre-treatment improved both the hydrolysis rate and the overall degradability of paunch solid by up to 4.4 times and 60%, respectively. The enhanced hydrolysis rate and methane yield was correlated to changes in material composition during pre-treatment. While alkaline concentration was an important factor, there were no significant improvements at alkaline concentrations above 12 g 100gTS-1 (150 mM [OH-]).

Assessment of ATP-Bioluminescence and Dipslide Sampling to Determine the Efficacy of Slaughterhouse Cleaning and Disinfection Compared with Total Aerobic and Enterobacterales Counts.

Inadequate cleaning and disinfection (C&D) in slaughterhouses can cause bacterial contamination of meat, resulting in foodborne disease and reduced meat quality. Different methods for monitoring the efficacy of C&D procedures are available, but few studies have assessed their reliability. This study examined C&D efficacy in slaughterhouses and evaluated the diagnostic performance of methods for measuring surface hygiene. One red meat and one poultry slaughterhouse in Sweden were each visited on six occasions before and six occasions after C&D. Sampling points were sampled with: swabbing and plating for total aerobic bacteria (TAB) and Enterobacterales (EB); dipslides for total viable count; and ATP-bioluminescence tests. To evaluate the diagnostic performance of the dipslide and ATP-bioluminescence methods, the results were compared with (TAB) as a reference. In total, 626 samples were collected. For the majority of samples, TAB was lower after than before C&D and EB were mainly detected before C&D, indicating C&D efficacy. Greater reductions in mean TAB were observed in processing areas (2.2 and 2.8 log CFU/100 cm2 in red meat and poultry slaughterhouse, respectively) than in slaughter areas (1.3 log CFU/100 cm2 in both slaughterhouses). Approximately half of all samples were assessed as non acceptably clean (52% for red meat and 46% for poultry slaughterhouse) according to previously published thresholds. Critical food contact surfaces that were insufficiently cleaned and disinfected were plucking fingers, shackles, and a post-dehairing table. Cleaning and disinfection of drains and floors were inadequate. The ATP-bioluminescence method showed low specificity compared with the reference (TAB) in both the red meat (0.30) and poultry slaughterhouses (0.64). The sensitivity of dipslides was low (0.26) in the red meat slaughterhouse compared with TAB. A combination of ATP-bioluminescence and dipslides could provide more accurate estimates of C&D efficacy.

Ready-to-eat Meat Plant Characteristics Associated with Food Safety Deficiencies During Regulatory Compliance Audits, Ontario, Canada.

Food safety deficiencies in ready-to-eat (RTE) meat processing plants can increase foodborne disease risks. The purpose of this study was to identify common deficiencies and factors related to improved food safety performance in RTE meat plants in Ontario. Routine food safety audit records for licensed provincial free-standing meat processing plants (FSMPs) and abattoirs that process RTE meats were obtained and analyzed in Ontario, Canada, from 2015 to 2019. A Bayesian regression analysis was conducted to examine the association between selected plant characteristics and two outcomes: overall audit rating (pass vs. conditional pass or fail) and individual audit item fail rate. The audit rating was examined in a logistic model, while the audit item fail rate was evaluated in a negative binomial model. The majority (87.7%, n = 800/912) of audits resulted in a pass rating (compared to conditional pass or fail). The mean number of employees per plant, among 200/204 plants with employee data available, was 11.6 (SD = 20.6, range = 1-200). For the logistic regression model, FSMPs were predicted to have a much higher probability of passing audits than abattoirs (32.0% on average, with a 95% credible interval [CI] of 13.8-52.8%). The number of plant employees, water source (municipal vs. private), and types of RTE meat products produced had little to no consistent association with this outcome. The negative binomial model predicted a -0.009 points lower fail rate, on average, for audit items among FSMPs than abattoirs (95% CI: -0.001, -0.018). Meat plants producing jerky had a higher audit item fail rate compared to those that did not produce such products. The other investigated variables had little to no association with this outcome. The results found in this study can support and guide future inspection, audit and outreach efforts to reduce foodborne illness risks associated with RTE meats.

Dispersion of sneeze droplets in a meat facility indoor environment - Without partitions.

Spreading patterns of the coronavirus disease (COVID-19) showed that infected and asymptotic carriers both played critical role in escalating transmission of virus leading to global pandemic. Indoor environments of restaurants, classrooms, hospitals, offices, large assemblies, and industrial installations are susceptible to virus outbreak. Industrial facilities such as fabrication rooms of meat processing plants, which are laden with moisture and fat in indoor air are the most sensitive spaces. Fabrication room workers standing next to each other are exposed to the risk of long-range viral droplets transmission within the facility. An asymptomatic carrier may transmit the virus unintentionally to fellow workers through sporadic sneezing leading to community spread. A novel Computational Fluid Dynamics (CFD) model of a fabrication room with typical interior (stationary objects) was prepared and investigated. Study was conducted to identify indoor airflow patterns, droplets spreading patterns, leading droplets removal mechanism, locations causing maximum spread of droplets, and infection index for workers along with stationary objects in reference to seven sneeze locations covering the entire room. The role of condensers, exhaust fans and leakage of indoor air through large and small openings to other rooms was investigated. This comprehensive study presents flow scenarios in the facility and helps identify locations that are potentially at lower or higher risk for exposure to COVID-19. The results presented in this study are suitable for future engineering analyses aimed at redesigning public spaces and common areas to minimize the spread of aerosols and droplets that may contain pathogens.

Genetic Diversity of Listeria Detected in the Production Environment of Meat Processing.

The safety of food production as concerns Listeria is the key to the sanitary wellbeing of manufactured products. Molecular-genetic methods for the analysis of Listeria, including whole-genome sequencing, are effective in monitoring persistent contaminants and in the epidemic investigation of cases of foodborne infections. They have been adopted in the European Union, United States, and Canada. In Russia, multilocus and whole-genome sequencing has proven itself in the analysis of clinical food isolates and Listeria from the environment. The objective of the study was molecular-genetic characterization of Listeria detected in the industrial environment of meat processing. To characterize the Listeria isolates, microbiological methods were used according to GOST (State Standard) 32031-2012, as well as multilocus sequencing, including the analysis of seven housekeeping genes and four virulence genes, as well as whole-genome sequencing. In swabs that were positive for the presence of Listeria spp. taken at two meat-processing plants in Moscow, Listeria monocytogenes constituted 81% and L. welshimeri 19%. The predominant genotype (Sequence Type, ST) of L. monocytogenes was ST8. The variety was supplemented with ST321, ST121, and ST2330 (CC9 (Clonal Complex 9)). L. welshimeri, which prevailed in the second production, was represented by ST1050 and ST2331. The genomic characteristics of L. welshimeri isolates confirmed that they have high adaptive capabilities both as concerns production conditions (including resistance to disinfectants) and the metabolic peculiarities of the gastrointestinal tract of animals. L. monocytogenes CC9 and CC121 are also correlated with food production in other countries. However, L. monocytogenes CC8 and CC321 can cause invasive listeriosis. The concordance in the internalin profile of the ST8 isolates from the industrial environment with the clinical isolates ST8 and ST2096 (CC8) is a cause for concern. The study showed the effectiveness of molecular-genetic methods in determining the diversity of Listeria detected in the production environment of meat processing, and laid the foundation for monitoring of persistent contaminants.