Performance of a polymerization-based electrochemically assisted persulfate process on a real coking wastewater treatment.

Industrial wastewater should be treated with caution due to its potential environmental risks. In this study, a polymerization-based cathode/Fe3+/peroxydisulfate (PDS) process was employed for the first time to treat a raw coking wastewater, which can achieve simultaneous organics abatement and recovery by converting organic contaminants into separable solid organic-polymers. The results confirm that several dominant organic contaminants in coking wastewater such as phenol, cresols, quinoline and indole can be induced to polymerize by self-coupling or cross-coupling. The total chemical oxygen demand (COD) abatement from coking wastewater is 46.8% and the separable organic-polymer formed from organic contaminants accounts for 62.8% of the abated COD. Dissolved organic carbon (DOC) abatement of 41.9% is achieved with about 89% less PDS consumption than conventional degradation-based process. Operating conditions such as PDS concentration, Fe3+ concentration and current density can affect the COD/DOC abatement and organic-polymer yield by regulating the generation of reactive radicals. ESI-MS result shows that some organic-polymers are substituted by inorganic ions such as Cl-, Br-, I-, NH4+, SCN- and CN-, suggesting that these inorganic ions may be involved in the polymerization. The specific consumption of this coking wastewater treatment is 27 kWh/kg COD and 95 kWh/kg DOC. The values are much lower than those of the degradation-based processes in treating the same coking wastewater, and also are lower than those of most processes previously reported for coking wastewater treatment.

Characteristics of minerals and oxide compounds in sediment collected from blood cockle culture areas at Bandon Bay, Thailand.

Bandon Bay is a very fertile bay for coastal aquaculture, especially for blood cockles (Anadara granosa). Its structural pattern supports the flow of nutrients which directly sent from many rivers resulted the high production capacity of blood cockle at the top level in the country. Besides organic compounds present in sediment, inorganic substances are essential for growth, survival and shell development of blood cockles. A comparative study of minerals and oxide compounds which accumulated in the sediments at eight stations around the cockle culture area was conducted. These stations are located along the estuaries at Tha Thong, Tha Chang, Phum Riang, and Tapi. The proportion of oxide compounds were determinedusing X-Ray Fluorescence (XRF) technique and minerals were analyzed by Atomic Absorption Spectroscopy (AAS). Results showed that sediment characteristics, oxide composition and the amount of minerals among the stations are different from each other. The sediments of the eastern and the western coasts were characterized as crumble clay and muddy sand, respectively. Twelve types of oxide compounds, namely SiO2, Al2O3, Fe2O3, K2O, Cl, MgO, Na2O, SO3, CaO, TiO2, MnO, P2O5 were found in various quantities, with SiO2, Al2O3, and Fe2O3 were the fundamental minerals ranging from 85.64-90.82%. Tha Thong estuary in the east coast showed highly significant quantities (P<0.05) of potassium, calcium and manganese compared to the other estuaries.

Long-term evaluating the strengthening effects of iron-carbon mediator for coking wastewater treatment in EGSB reactor.

Coking wastewater (CWW) treatment is difficult due to its complex composition and high biological toxicity. Iron-carbon mediators was used to enhance the treatment of CWW through iron-carbon microelectrolysis (ICME). The results indicated that the removal rate of COD and phenolic compounds were enhanced by 24.1 % and 23.5 %, while biogas production and methane content were promoted by 50 % and 7 %. Microbial community analysis indicated that iron-carbon mediators had a transformative impact on the reactor's performance and dependability by enriching microorganisms involved in direct and indirect electron transfer, such as Anaerolineae and Methanothrix. The mediator also produced noteworthy gains in LB-EPS and TB-EPS, increasing by roughly 109.3 % and 211.6 %, respectively. PICRISt analysis demonstrated that iron-carbon mediators effectively augment the abundance of functional genes associated with metabolism, Citrate cycle, and EET pathway. This study provides a new approach for CWW treatment.

Associations of multiple hydroxy-polycyclic aromatic hydrocarbons with serum levels of lipids in the workers from coking and non-ferrous smelting industries.

Epidemiological evidence indicates that exposure to polycyclic aromatic hydrocarbons (PAHs) is associated with certain metabolic diseases. However, the relationship between PAHs and serum lipid profiles in exposed subjects remain unknown. Herein, the associations of multiple (8) urinary hydroxylated PAHs (OH-PAHs) in workers of coking (n = 655) and non-ferrous smelting (n = 614) industries with serum lipid levels (marking lipid metabolism) were examined. Multivariable linear regression, Bayesian kernel machine regression, and quantile g-computation were used. Most urinary OH-PAHs were significantly higher (p < 0.001) in coking workers than in non-ferrous smelting workers. In workers of both industries, OH-PAH exposure was associated with elevated levels of serum total cholesterol, total triglyceride, and low-density lipoprotein, as well as reduced high-density lipoprotein levels. Specifically, urinary 4-hydroxyphenanthrene was significantly positively associated with serum total cholesterol, total triglyceride, and low-density lipoprotein levels in non-ferrous smelting workers; however, the completely opposite association of 4-hydroxyphenanthrene with these lipid levels was observed in coking workers. The results of this pioneering examination suggest that exposure to OH-PAHs may contribute to dyslipidemia in coking and non-ferrous smelting workers, and distinct patterns of change were observed. Further prospective studies involving larger sample sizes are needed to further validate the findings.

Hybrid peroxymonosulfate/activated carbon fiber-sequencing batch reactor system for efficient treatment of coking wastewater: Establishment and influential factors.

Coking wastewater contains high concentrations of toxic and low biodegradable organics, causing long hydraulic retention times for its biological treatment process. This study developed a pretreatment method for coking wastewater by using activated carbon fiber (ACF) activated peroxymonosulfate (PMS) to improve the treatment performance of subsequent biological post-treatment process, sequencing batch reactor (SBR). The results showed that, after optimization of treatment processes, the removal efficiency of chemical oxygen demand (COD), phenol, and chroma in coking wastewater reached to 76, 98, and 98%, respectively, with a significantly improved biodegradability. Compared with the sole SBR system without any pretreatment that could remove 73% of COD, the ACF/PMS+SBR system removed over 97% of COD in coking wastewater. Moreover, this pretreatment method facilitated the growth of functional bacteria for organics biodegradation, indicating its high potential as a highly efficacious pretreatment strategy to improve the overall treatment efficiency of coking wastewater.

Predicting the Occurrence of Substituted and Unsubstituted, Polycyclic Aromatic Compounds in Coking Wastewater Treatment Plant Effluent using Machine Learning Regression.

Organic contaminants such as polycyclic aromatic compounds (PACs) occurring in industrial effluents can not only persist in wastewater but transform into more toxic and mobile, substituted heterocyclic products during treatment. Thus, predicting the occurrence of PACs and their heterocyclic derivatives (HPACs) in coking wastewater is of utmost importance to reduce the environmental risks in water bodies that receive industrial effluents. Although HPACs can be monitored through sampling and analysis, the characterisation techniques used in their analyses are costly and time-consuming. In this study, we propose 3 distinct kernel-based machine learning (ML) models for predicting PACs including substituted HPACs and alkylated PACs occurring in coking wastewater. By using routinely measured wastewater quality data as input for our models, we predicted the occurrence of 14 HPACs in the final effluent of a coking wastewater treatment plant. Support Vector Machine based regression model (SVR) used for HPAC prediction showed the highest R2 of 0.83. Performance assessment of SVR model showed a mean absolute logarithmic error (MALE) of 0.46 and root mean square error (RMSE) of 0.073 ng/L. Comparatively, K-Nearest Neighbor and Random Forest models showed lower R2 of 0.75 and 0.76 respectively for HPAC prediction. Feature analysis attributed the superior predictability of SVR model likely to its higher weightage (81%) towards dissolved organic carbon and total ammonia as input variables. Both these variables could capture the underlying secondary PAC transformations likely occurring in the treatment plant. Partial dependence plots predicted that ammonia levels higher than 120 mg/L and DOC levels of 50-60 mg/L were likely linked to higher HPACs occurring in the final effluent. This work highlights the capability of kernel-based ML models in capturing nonlinear wastewater chemistry and offers a tool for monitoring trace organic contaminants released in coking effluents.

Simultaneously enhancing toluene adsorption and regeneration process by hierarchical pore in activated coke: a combined experimental and adsorption kinetic modeling study.

Activated coke is a type of commonly used adsorbent for benzene series VOCs such as toluene, but traditional microporous activated coke usually faces the challenge of poor regeneration performance. Herein, based on self-made activated cokes with typical pore configuration, we found that adsorption and regeneration of toluene can be simultaneously enhanced by constructing hierarchical pore in activated coke. Correlations of pore configuration with toluene adsorption capacity and regeneration efficiency reveal that micropore contributes for strong toluene adsorption; meso-macropore provides mass transfer channel for toluene desorption and regeneration process. Hierarchical porous activated coke prepared from Zhundong subbituminous coal not only achieves the highest toluene adsorption capacity of 340.92 mg·g-1, but also can retain more than 90% of initial adsorption capacity after five adsorption-regeneration cycles. By contrast, micropore-dominant activated cokes can only retain 70% of initial adsorption capacity. Adsorption kinetic modelling on adsorption breakthrough curves shows that hierarchical porous activated coke prepared from Zhundong subbituminous coal exhibits high adsorption and diffusion rate constants of 14.39 and 33.45 min-1, respectively, much higher than those of micropore-dominant activated cokes. Due to the accelerated surface adsorption and diffusion processes induced by meso-macropore, toluene adsorption and regeneration behavior can be simultaneously improved. Results from this work validated the role of pore hierarchy in toluene adsorption-regeneration process, providing guidance for designing high-performance activated coke with synergistically improved toluene adsorption capacity and regeneration performance.

Unravelling epigenetic mechanisms in Cerastoderma edule genome: a comparison of healthy and neoplastic cockles.

Cancer is a multifaceted genetic disease characterized by the acquisition of several essential hallmarks. Notably, certain cancers exhibit horizontal transmissibility, observed across mammalian species and diverse bivalves, the latter referred to as hemic neoplasia. Within this complex landscape, epigenetic mechanisms such as histone modifications and cytosine methylation emerge as fundamental contributors to the pathogenesis of these transmissible cancers. Our study delves into the epigenetic landscape of Cerastoderma edule, focusing on whole-genome methylation and hydroxymethylation profiles in heathy specimens and transmissible neoplasias by means of Nanopore long-read sequencing. Our results unveiled a global hypomethylation in the neoplastic specimens compared to their healthy counterparts, emphasizing the role of DNA methylation in these tumorigenic processes. Furthermore, we verified that intragenic CpG methylation positively correlated with gene expression, emphasizing its role in modulating transcription in healthy and neoplastic cockles, as also highlighted by some up-methylated oncogenic genes. Hydroxymethylation levels were significantly more elevated in the neoplastic samples, particularly within satellites and complex repeats, likely related to structural functions. Additionally, our analysis also revealed distinct methylation and activity patterns in retrotransposons, providing additional insights into bivalve neoplastic processes. Altogether, these findings contribute to understanding the epigenetic dynamics of bivalve neoplasias and shed light on the roles of DNA methylation and hydroxymethylation in tumorigenesis. Understanding these epigenetic alterations holds promise for advancing our broader understanding of cancer epigenetics.

Performance of a novel up-flow electrocatalytic hydrolysis acidification reactor (UEHAR) coupled with anoxic/oxic system for treating coking wastewater.

In this study, the performance of a novel up-flow electrocatalytic hydrolytic acidification reactor (UEHAR) and anoxic/oxic (ANO2/O2) combined system (S2) was compared with that of a traditional anaerobic/anoxic/oxic (ANA/ANO1/O1) system (S1) for treating coking wastewater at different hydraulic retention time (HRT). The effluent non-compliance rates of chemical oxygen demand (COD) of S2 were 45 %, 35 %, 25 % and 55 % lower than S1 with HRT of 94, 76, 65 and 54 h. The removal efficiency of benzene, toluene, ethylbenzene and xylene (BTEX) in S2 was 10.6 ± 2.4 % higher than that in S1. The effluent concentration of volatile phenolic compounds (VPs) in S2 was lower than 0.3 mg/L. The dehydrogenase activity (DHA) and adenosine triphosphate (ATP) of O2 were enhanced by 67.2 ± 26.3 % and 40.6 ± 14.2 % compared with O1, respectively. Moreover, COD was used to reflect the mineralization index of organic matter, and the positive correlation between COD removal rate and microbial activity, VPs, and BTEX was determined. These results indicated that S2 had extraordinary microbial activity, stable pollutant removal ability, and transcendental effluent compliance rate.

Symbiotic virus-bacteria interactions in biological treatment of coking wastewater manipulating bacterial physiological activities.

Biological treatment is commonly used in coking wastewater (CWW) treatment. Prokaryotic microbial communities in CWW treatment have been comprehensively studied. However, viruses, as the critical microorganisms affecting microbial processes and thus engineering parameters, still remain poorly understood in CWW treatment context. Employing viromics sequencing, the composition and function of the viral community in CWW treatment were discovered, revealing novel viral communities and key auxiliary metabolic functions. Caudovirales appeared to be the predominant viral order in the oxic-hydrolytic-oxic (OHO) CWW treatment combination, showing relative abundances of 62.47 %, 56.64 % and 92.20 % in bioreactors O1, H and O2, respectively. At the family level, Myoviridae, Podoviridae and Siphoviridae mainly prevailed in bioreactors O1 and H while Phycodnaviridae dominated in O2. A total of 56.23-92.24% of novel viral contigs defied family-level characterization in this distinct CWW habitat. The virus-host prediction results revealed most viruses infecting the specific functional taxa Pseudomonas, Acidovorax and Thauera in the entire OHO combination, demonstrating the viruses affecting bacterial physiology and pollutants removal from CWW. Viral auxiliary metabolic genes (AMGs) were screened, revealing their involvement in the metabolism of contaminants and toxicity tolerance. In the bioreactor O1, AMGs were enriched in detoxification and phosphorus ingestion, where glutathione S-transferase (GSTs) and beta-ketoadipyl CoA thiolase (fadA) participated in biodegradation of polycyclic aromatic hydrocarbons and phenols, respectively. In the bioreactors H and O2, the AMGs focused on cell division and epicyte formation of the hosts, where GDPmannose 4,6-dehydratase (gmd) related to lipopolysaccharides biosynthesis was considered to play an important role in the growth of nitrifiers. The diversities of viruses and AMGs decreased along the CWW treatment process, pointing to a reinforced virus-host adaptive strategy in stressful operation environments. In this study, the symbiotic virus-bacteria interaction patterns were proposed with a theoretical basis for promoting CWW biological treatment efficiency. The findings filled the gaps in the virus-bacteria interactions at the full-scale CWW treatment and provided great value for understanding the mechanism of biological toxicity and sludge activity in industrial wastewater treatment.

Further treatment of coking wastewater treated in A2O-MBR by the nanofiltration-powder activated carbon hybrid system.

In this study, further treatment of coking wastewater treated in anoxic-oxic-membrane bioreactor (A2O-MBR) was investigated to meet the standards of the ministry by means of nanofiltration (NF) (with two different membranes and different pressures), microfiltration -powder activated carbon (MF-PAC) hybrid system and NF-PAC (with two different membranes and five different PAC concentrations) hybrid system. In addition to the parameters determined by the ministry, other parameters such as ammonium, thiocyanate (SCN-), hydrogen cyanide (HCN), dissolved organic carbon (DOC), dissolved inorganic carbon (DIC), color were also examined to evaluate the flux performance and treatment efficiency of the hybrid processes. According to the results, chemical oxygen demand (COD) in the NF process, COD and total cyanide (T-CN) in the MF-PAC process could not meet the discharge standards. As for the NF-PAC hybrid system, XN45 membrane met the discharge standards in all parameters (COD = 96±1.88 mg/L, T-CN =<0,02 mg/L, phenol =<0.05 mg/L), with a recovery rate of 78% at 0.5 g/L PAC concentration.

An efficient method of preparing Si-Fe-Al-Ca alloy from coal gasification fine slag via plasma smelting and alternating current magnetic field.

It is of great significance to solve the environmental problems caused by the unreasonable treatment of coal gasification slag. This study successfully produced Si-Fe-Al-Ca alloy from low-carbon fine slag with petroleum coke as reducing agent in a plasma furnace with an alternating current magnetic field, which solved the problem of the high reactivity requirement of carbon reductant for plasma smelting. The optimum carbon content of the mixed low-carbon fine slag and petroleum coke is 105% of the theoretical value. As the strength of the alternating current magnetic field increased (from 0% to 100% of the maximum power), the yield of the alloy (from 25.46% to 58.19%) and the recovery ratios of each element (Si, Fe, Al, Ca, Ti) increased. In addition, as the magnetic field strength increased, the pores inside the alloy became smaller, the composition of the alloy became more homogeneous, and a better separation of the alloy from the slag was observed. The main composition of the alloy at the strongest alternating current magnetic field is Si: 51.14 wt%, Fe: 28.41 wt%, Al: 9.14 wt%, Ca: 7.15 wt%, Ti: 2.03 wt%. We attribute the enhanced smelting effect of the alternating current magnetic field to the resistive heat and Lorentz force produced by the induced current. In addition, the skin effect concentrated the induced current on the surface of the oxide particles and carbon particles, which increased the temperature of the reaction interface and promoted the carbothermal reduction reaction.

Selenium-modified activated coke: a high-capacity and facile designed Hg0 adsorbent for coal-fired flue gas.

The substantial amount of mercury emissions from coal-fired flue gas causes severe environmental contamination. With the Minamata Convention now officially in force, it is critical to strengthen mercury pollution control. Existing activated carbon injection technologies suffer from poor desulfurization performance and risk secondary-release risks. Therefore, considering the potential industrial application of adsorbents, we selected cost-effective and readily available activated coke (AC) as the carrier in this study. Four metal selenides-copper, iron, manganese, and tin-were loaded onto the AC to overcome the application problems of existing technologies. After 120 min of adsorption, the CuSe/AC exhibited the highest efficiency in removing Hg0, surpassing 80% according to the experimental findings. In addition, the optimal adsorption temperature window was 30-120 °C, the maximum adsorption rate was 2.9 × 10-2 mg·g-1·h-1, and the effectiveness of CuSe/AC in capturing Hg0 only dropped by 5.2% in the sulfur-containing atmosphere. The physicochemical characterization results indicated that the AC surface had a uniform loading of CuSe with a nanosheet structure resembling polygon and that the Cu-to-Se atomic ratio was close to 1:1. Finally, two possible Hg0 reaction pathways on CuSe/AC were proposed. Moreover, it was elucidated that the highly selective binding of Hg0 with ligand-unsaturated Se- was the key factor in achieving high adsorption efficiency and sulfur resistance in the selenium-functionalized AC adsorbent. This finding offers substantial theoretical support for the industrial application of this adsorbent.

Removal of PAHs, TSS, oils and fats from ammonium-rich coke wastewater by granular filtration.

Coke wastewater is a complex industrial wastewater due to its high content of toxic compounds such as cyanides, thiocyanates, phenols, tar, oils, and fats. After a series of treatments, wastewater with a high ammonium content is obtained (around 4,150 mg·L-1). A stripping process is used to reduce it. Certain pollutants in the influent, such as tar, polycyclic aromatic hydrocarbons (PAHs), oils, fats and total suspended solids (TSS), interfere with stripping and therefore must be previously removed. In this study, the performance of a pilot-scale airlift sand filter was evaluated under real conditions for the reduction of the concentration of tar, PAHs, oils, fats and TSS, before stripping. Prior to the sand filter, a cationic flocculant was added to the influent (2 ppm). High (10 mm.min-1), medium (7.5 mm.min-1) and low sand speeds (1.9-2.6 mm.min-1) were assessed. The latter conditions gave the best results: a decrease of 98.2% in TSS, 99.7% in oils, fats and grease and 97.6% in PAHs. The final effluent (≤ 1.6 mg PAHs·L-1, ≤ 5 mg TSS·L-1 and ≤ 0.05 mg·L-1 of fats, oils and grease) was suitable for the stripping process.

Microplastics in retail shellfish from a seafood market in eastern Thailand: Occurrence and risks to human food safety.

This study aimed to investigate the presence of microplastics in three economically essential shellfish species: green mussels, cockles and spotted babylon. The average abundance of microplastics ranged from 2.41 to 2.84 particles/g wet weight. The predominant shape was fiber, with colors ranging from black-grey to transparent. The size of the microplastics discovered was <1.0 mm. Polystyrene and polyethylene were the most detected types in mussels and cockles, while linen was the predominant type in spotted babylon. The Thai population's estimated annual intake (EAI) of microplastics through shellfish consumption ranged from 20.23 to 1178.42 particles/person/year. The potential human health risks were evaluated using the polymer hazard index (PHI), which led to risk categories III-IV. These findings, along with others from the literature, indicate that shellfish consumption may pose risks to human health, depending on the species consumed and the origin of the specimens.

The effects and potential mechanisms of essential metals on the associations of polycyclic aromatic hydrocarbons with blood cell-based inflammation markers.

BACKGROUND: Polycyclic aromatic hydrocarbons (PAHs) are well-acknowledged pro-inflammatory chemicals, but their associations with blood cell-based inflammatory biomarkers need further investigation. Moreover, the effects and mechanisms of essential metals on PAH-related inflammation remain poorly understood. OBJECTS: To elucidate the associations of PAHs on inflammatory biomarkers, as well as the effects and mechanisms of essential metals on these associations. METHODS: A cross-sectional study was conducted on 1388 coke oven workers. We analyzed the modification effects of key essential metal(s) on PAHs-inflammatory biomarkers associations. To explore the possible mechanisms from an inflammation perspective, we performed a bioinformatic analysis on the genes of PAHs and essential metals obtained from the Comparative Toxicogenomics Database (CTD) and performed a mediation analysis. RESULTS: We observed associations of PAHs and essential metals with lymphocyte-to-monocyte ratio (LMR) (P < 0.05). PAH mixtures were inversely associated with LMR (ßQGC-index = -0.18, P < 0.001), with 1-hydroxypyrene (1-OH-Pyr) being the most prominent contributor (weight = 63.37%), whereas a positive association between essential metal mixtures and LMR was observed (ßQGC-index = 0.14, P < 0.001), with tin being the most significant contributor (weight = 51.61%). An inverse association of 1-OH-Pyr with LMR was weakened by increased tin exposure (P < 0.05). The CTD database showed that PAHs and tin compounds co-regulated 22 inflammation-associated genes, but they regulated most genes in opposite directions. Further identified the involvement of oxidative stress and mediation analysis showed that the mediation effect of 8-hydroxydeoxyguanosine (8-OHdG) on 1-OH-Pyr-LMR association presented heterogeneity between low and high tin tertile groups (I2 = 37.84%). CONCLUSION: 1-OH-Pyr and tin were significantly associated with LMR. Modification effects indicated that the inverse association of 1-OH-Pyr with LMR was mitigated with an increase in tin. The mediation effect of 8-OHdG on the inverse association of 1-OH-Pyr with LMR may be partially dependent on tin.

Environmental and dietary exposure to 24 polycyclic aromatic hydrocarbons in a typical Chinese coking plant.

Polycyclic aromatic hydrocarbons (PAHs), known for their health risks, are prevalent in the environment, with the coking industry being a major source of their emissions. To bridge the knowledge gap concerning the relationship between environmental and dietary PAH exposure, we explore this complex interplay by investigating the dietary exposure characteristics of 24 PAHs within a typical Chinese coking plant and their association with environmental pollution. Our research revealed Nap and Fle as primary dietary contaminants, emphasizing the significant influence of soil and atmospheric pollution on PAH exposure. We subjected our data to non-metric multidimensional scaling (NMDS), Spearman correlation analysis, Lasso regression, and Weighted Quantile Sum (WQS) regression to delve into this multifaceted phenomenon. NMDS reveals that dietary PAH exposure, especially within the high molecular weight (HMW) group, is common both within and around the coking plant. This suggests that meals prepared within the plant may be contaminated, posing health risks to coking plant workers. Furthermore, our assessment of dietary exposure risk highlights Nap and Fle as the primary dietary contaminants, with BaP and DahA raising concerns due to their higher carcinogenic potential. Our findings indicate that dietary exposure often exceeds acceptable limits, particularly for coking plant workers. Correlation analyses uncover the dominant roles of soil and atmospheric pollution in shaping dietary PAH exposure. Soil contamination significantly impacts specific PAHs, while atmospheric pollution contributes to others. Additionally, WQS regression emphasizes the substantial influence of soil and drinking water on dietary PAHs. In summary, our study sheds light on the dietary exposure characteristics of PAHs in a typical Chinese coking plant and their intricate interplay with environmental factors. These findings underscore the need for comprehensive strategies to mitigate PAH exposure so as to safeguard both human health and the environment in affected regions.

Biochar inoculated with Rhodococcus biphenylivorans altered microecological regulation by promoting quorum sensing and electron transfer: Up-regulation of related genes and enhancement of phenol and ammonia degradation.

Bioaugmentation is an efficient method for improving the efficiency of coking wastewater removal. Nevertheless, how different immobilization approaches affect the efficiency of bioaugmentation remains unclear, as does the corresponding mechanism. With the assistance of immobilized bioaugmentation strain Rhodococcus biphenylivorans B403, the removal of synthetic coking wastewater was investigated (drying agent, alginate agent, and absorption agent). The reactor containing the absorption agent exhibited the highest average removal efficiency of phenol (99.74 %), chemical oxygen demand (93.09 %), and NH4+-N (98.18 %). Compared to other agents, the covered extracellular polymeric substance on the absorption agent surface enhanced electron transfer and quorum sensing, and the promoted quorum sensing benefited the activated sludge stability and microbial regulation. The phytotoxicity test revealed that the wastewater's toxicity was greatly decreased in the reactor with the absorption agent, especially under high phenol concentrations. These findings showed that the absorption agent was the most suitable for wastewater treatment bioaugmentation.

Waste-derived catalysts for tar cracking in hot syngas cleaning.

Catalytic tar cracking is a promising technique for hot syngas cleaning unit in gasification plants because it can preserve tars chemical energy, so increasing the syngas heating value. The cost associated with catalyst preparation is a key issue, together with its deactivation induced by coke deposition. Iron is a cheap and frequently used catalyst, which can also be found in some industrial wastes. The study aims to assess the catalytic efficiency for tar cracking of two waste-derived materials (red mud and sewage sludge) having high content of iron. The catalysts were supported on spheres of γ-Al2O3, and their efficiency was compared to that of a pure iron catalyst. The role of support was investigated by testing pure red mud, with and without the support. A series of long-term tests using naphthalene as tar model compound were carried out under different values of process temperatures (750 °C-800 °C) and steam concentrations (0 %-7.5 %). The waste derived catalysts showed lower hydrogen yields compared to pure iron catalyst, due to their lower content of iron. On the other hand, the conversion efficiencies of all the tested catalysts resulted rather similar, since the Alkali and Alkaline-Earth Metallic species present on the surface of waste-derived catalyst help in preventing coke deposition. The iron oxidation state appears to play an important role, with reduced iron more active than its oxidised form in the tar cracking reactions. This indicates the importance of tuning steam concentration to keep constant the reduced state of iron while limiting coke deposition.

Binary blends of normal corn starch and cow cockle starch for the slow-thickening behavior upon pasting.

Corn starch with slow thickening property may facilitate more efficient heat transfer and safety of corn starch-thickened foods. Partial substitution of normal corn starch (NCS) with slow-pasting behavior of cow cockle starch (CCS) was hypothesized to impart binary starch blend with slow-thickening effect during hydrothermal heating. To test hypothesis, a series of starch blend dispersions (with weight ratios of CCS to NCS = 75:25, 50:50, 25:75) were prepared at various starch concentrations (6 %, 8 %, 10 %, and 12 %) and subjected to the Rapid Viscosity Analysis (RVA). RVA viscographs of starch blends were compared with that of NCS, suggesting that nearly all starch blends at various concentrations showed longer time span of pasting and lower pasting rate. Although CCS and NCS blend gels exhibited lower Young's modulus and hardness based on textural profile analysis, the sensory panels revealed that 6 % and 8 % starch blend gels (with weight ratio of CCS to NCS = 25:75) showed the mouthfeel analogous to NCS gel. These findings highlight a viable non-chemical modification strategy that enables binary blends of CCS and NCS as a novel gelling agent with slow-pasting property and may aid in safety and high-quality processing of hydrogel foods.