ABSTRACT
Dickkopf-1 (DKK1), a Wnt inhibitor secreted by bone marrow stromal cells (MSC), is known to play an important role in long-term non-union bone fracture defects and glucocorticoid induced osteoporosis. Mitigating its effects in early bone defects could improve osteogenesis and bone defect healing. Here, we applied a biomaterial strategy to deplete a defect environment from DKK1 by scavenging the protein via a macromer-based biomaterial covalently decorated with sulfated hyaluronan (sHA3). The material consisted of cross-copolymerized three-armed macromers with a small anchor molecule. Using the glycidyl anchor, polyetheramine (ED900) could be grafted to the material to which sHA3 was efficiently coupled in a separate step. For thorough investigation of material modification, flat material surfaces were generated by fabricating them on glass discs. The binding capability of sHA3 for DKK1 was demonstrated in this study by surface plasmon resonance measurements. Furthermore, the surfaces demonstrated the ability to scavenge and inactivate pathologic amounts of DKK1 from complex media. In a combinatory approach with Wnt3a, we were able to demonstrate that DKK1 is the preferred binding partner of our sHA3-functionalized surfaces. We validated our findings in a complex in vitro setting of differentiating SaOS-2 cells and primary hMSC. Here, endogenous DKK-1 was scavenged resulting in increased osteogenic differentiation indicating that this is a consistent biological effect irrespective of the model system used. Our study provides insights in the mechanisms and efficiency of sHA3 surface functionalization for DKK1 scavenging, which may be used in a clinical context in the future.
Subject(s)
Biocompatible Materials , Osteogenesis , Cell Differentiation , Hyaluronic Acid , SulfatesABSTRACT
Ureteric stents have become an indispensable tool in the armamentarium of every urologist. However, they carry their own morbidity resulting mostly from infectious or abacterial fouling and biofilm formation, and/or urothelial hyperplastic reaction. All of these may interact and lead to clinical complications. Many different stent designs and coatings have been proposed. In this study, we focused on the effect of paclitaxel-coated stents on hyperplastic proliferation of ureteral tissue, using as example anastomotic strictures after ureteroureterostomy in a rat model. Human urothelial cells (SV-HUC-1) were used to determine paclitaxel dosages in vitro. Polyurethane stents were coated with a paclitaxel containing biodegradable polymer and studied in a ureteroureterostomy rat model. 48 male 9-week-old Sprague-Dawley rats underwent either sham surgery (n = 16) or ureteroureterostomy with sutured anastomosis, and consecutive stenting with either a paclitaxel-coated or an uncoated stent (16 per group), respectively. The animals received daily intraperitoneal injections of 5-bromo-2-deoxyuridine (20 mg/ml, 100 mg/kg body weight) during the first eight postoperative days, and were sacrificed on day 28. Healing of the ureteral anastomosis and proliferation of urothelial cells was examined histologically and immunohistochemically. In vitro, a concentration of 10 ng/mm2 paclitaxel can be considered as non-toxic, while still exerting an anti-proliferative effect on urothelial cells. Histologically, typical wound healing processes were seen at the site of the ureteral anastomosis in vivo. Proliferation of urothelial cells was significantly lower in animals with paclitaxel-coated stents compared to those with uncoated stents (LI 41.27 vs. 51.58, p < 0.001). Our results indicate that stenting of ureteral anastomoses with paclitaxel-coated stents can reduce hyperplastic proliferation of ureteral tissue. Paclitaxel-coated stents thus might be able to prevent not only scar-induced postoperative stenosis after reconstructive surgery, but also hyperplastic urothelial reaction in non-anastomotic stent patients as part of their inflammatory response to the foreign material.
Subject(s)
Drug-Eluting Stents , Paclitaxel/administration & dosage , Ureter/drug effects , Ureteral Obstruction/therapy , Urothelium/drug effects , Animals , Cell Line , Cell Proliferation/drug effects , Disease Models, Animal , Epithelial Cells/drug effects , Epithelial Cells/pathology , Humans , Hyperplasia/prevention & control , Male , Rats , Ureter/pathology , Ureter/surgery , Urothelium/cytology , Urothelium/pathologyABSTRACT
Osseointegration of dental implants can be promoted by implant-surface modifications using bisphosphonate coatings. In addition, it is of clinical interest to promote peri-implant bone formation and to restore bony structure in low bone-mass patients. The present study evaluated a combination of an anti-resorptive zoledronic acid (ZOL) implant-coating and a systemically applied sclerostin antibody, a known bone anabolic treatment principle, versus sole sclerostin antibody treatment or ZOL implant-coating in a rat osteoporosis model. Uncoated reference surface implants or ZOL-coated implants (n = 64/group) were inserted into the proximal tibia of aged osteoporotic rats three months following ovariectomy. 32 animals of each group received once weekly sclerostin antibody therapy. Osseointegration was assessed 2 or 4 weeks post-implantation by ex vivo µCT, histology and biomechanical testing. Overall implant survival rate was 97 %. Histomorphology revealed pronounced bone formation along the entire implant length of ZOL-coated implants. At 4 weeks following implant insertion, bone-implant contact, cancellous bone mineral density and bone volume/tissue volume were significantly increased for the combination of ZOL and sclerostin antibody as compared to sclerostin antibody or ZOL implant-coating alone. Removal torque was also significantly increased in the combination therapy group relative to animals receiving only sclerostin antibody therapy or ZOL-coated implants. In an osteoporotic rat model, the combination of anti-resorptive ZOL implant-coating and systemically applied sclerostin antibody led to significantly increased peri-implant bone formation. Therefore, the combination of ZOL and the osteoanabolic sclerostin antibody was more effective than either agent alone.
Subject(s)
Antibodies/pharmacology , Bone Density Conservation Agents/pharmacology , Bone Morphogenetic Proteins/metabolism , Coated Materials, Biocompatible/pharmacology , Osseointegration/drug effects , Osteoporosis/drug therapy , Zoledronic Acid/pharmacology , Animals , Bone Density/drug effects , Dental Implants , Disease Models, Animal , Female , Genetic Markers , Rats , Rats, WistarABSTRACT
OBJECTIVE: Biomaterials for periodontal regeneration may have insufficient mechanical and antimicrobial properties or are difficult to apply under clinical conditions. The aim of the present study was to develop a polymeric bone grafting material of suitable physical appearance and antimicrobial photodynamic activity. METHODS: Two light curable biomaterials based on urethane dimethacrylate (BioM1) and a tri-armed oligoester-urethane methacrylate (BioM2) that additionally contained a mixture of ß-tricalcium phosphate microparticles and 20wt% photosensitizer mTHPC (PS) were fabricated and analyzed by their compressive strength, flexural strength and modulus of elasticity. Cytotoxicity was observed by incubating eluates and in direct-contact to MC3T3-E1 cells. Antimicrobial activity was ascertained on Porphyromonas gingivalis and Enterococcus faecalis upon illumination with laser light (652nm, 1×100J/cm2, 2×100J/cm2). RESULTS: The compressive strength, flexural strength and elastic modulus were, respectively, 311.73MPa, 22.81MPa and 318.85MPa for BioM1+PS and 742.37MPa, 7.58MPa and 406.23MPa for BioM2+PS. Both materials did not show any cytotoxic behavior. Single laser-illumination (652nm) caused total suppression of P. gingivalis (BioM2+PS), while repeated irradiation reduced E. faecalis by 3.7 (BioM1+PS) and 3.1 (BioM2+PS) log-counts. SIGNIFICANCE: Both materials show excellent mechanical and cytocompatible properties. In addition, irradiation with 652nm induced significant bacterial suppression. The manufactured biomaterials might enable a more efficient cure of periodontal bone lesions. Due to the mechanical properties functional stability might be increased. Further, the materials are antimicrobial upon illumination with light that enables a trans-mucosal eradication of residual pathogens.
Subject(s)
Anti-Infective Agents/pharmacology , Biocompatible Materials/pharmacology , Guided Tissue Regeneration, Periodontal/methods , Methacrylates/pharmacology , Photochemotherapy/methods , Polyurethanes/pharmacology , Calcium Phosphates/pharmacology , Compressive Strength , Elastic Modulus , Enterococcus faecalis/drug effects , Flexural Strength , Materials Testing , Particle Size , Photosensitizing Agents/pharmacology , Porphyromonas gingivalis/drug effectsABSTRACT
Our ability of screening broad communities for clinically asymptomatic diseases critically drives population health. Sensory chewing gums are presented targeting the tongue as 24/7 detector allowing diagnosis by "anyone, anywhere, anytime". The chewing gum contains peptide sensors consisting of a protease cleavable linker in between a bitter substance and a microparticle. Matrix metalloproteinases in the oral cavity, as upregulated in peri-implant disease, specifically target the protease cleavable linker while chewing the gum, thereby generating bitterness for detection by the tongue. The peptide sensors prove significant success in discriminating saliva collected from patients with peri-implant disease versus clinically asymptomatic volunteers. Superior outcome is demonstrated over commercially available protease-based tests in saliva. "Anyone, anywhere, anytime" diagnostics are within reach for oral inflammation. Expanding this platform technology to other diseases in the future features this diagnostic as a massive screening tool potentially maximizing impact on population health.Early detection of gum inflammation caused by dental implants helps prevent tissue damage. Here, the authors present a peptide sensor that generates a bitter taste when cleaved by proteases present in peri-implant disease, embed it in a chewing gum, and compare the probe to existing sensors using patient saliva.
Subject(s)
Chewing Gum , Dental Implants , Gingivitis/diagnosis , Matrix Metalloproteinases/metabolism , Peptides/metabolism , Periodontitis/diagnosis , Taste , Gingivitis/metabolism , Humans , Periodontitis/metabolism , Saliva/enzymologyABSTRACT
Cryogels made of components of natural extracellular matrix components are potent biomaterials for bioengineering and regenerative medicine. Human dermal fibroblasts are key cells for tissue replacement during wound healing. Thus, any biomaterial for wound healing applications should enable growth, differentiation and matrix synthesis by these cells. Cryogels are highly porous scaffolds consisting of a network of interconnected pores. Here, we used a novel group of cryogels generated from acrylated hyaluronan where the polymerization was initiated by accelerated electrons (E-beam). This novel procedure omits any toxic polymerization initiators and results in sterile, highly elastic scaffolds with adjustable pore size, excellent swelling and low flow resistance properties. We show that these cryogels are effective 3D-substrates for long-term cultures of human dermal fibroblasts in vitro. The cells proliferate for at least 28days throughout the cryogels and deposit their own matrix in the pores. Moreover, key modulators of dermal fibroblasts during wound healing like TGFß and PDGF efficiently stimulated the expression of wound healing-relevant genes. In conclusion, electron beam initiated cryogels of acrylated hyaluronan represent a functional and cell compatible biomaterial that could be adapted for special wound healing applications by further functionalization.
Subject(s)
Acrylates/pharmacology , Cryogels/pharmacology , Electrons , Extracellular Matrix/metabolism , Fibroblasts/drug effects , Hyaluronic Acid/pharmacology , Acrylates/chemistry , Biocompatible Materials , Cell Proliferation/drug effects , Cryogels/chemical synthesis , Dermis/cytology , Dermis/metabolism , Elasticity , Extracellular Matrix/chemistry , Female , Fibroblasts/cytology , Fibroblasts/metabolism , Humans , Hyaluronic Acid/chemistry , Male , Platelet-Derived Growth Factor/pharmacology , Polymerization , Porosity , Primary Cell Culture , Tissue Engineering , Tissue Scaffolds , Transforming Growth Factor beta/pharmacologyABSTRACT
The interaction of human-derived chondrocytes and thin hyaluronan layers was studied using the quartz crystal microbalance with dissipation (QCM-D) technique combined with light microscopy. This approach allowed unique real-time monitoring of the interface between the cells and the sensor surface. Our results suggest that the hyaluronan layer is rapidly degraded by chondrocytes.
Subject(s)
Acoustics , Chondrocytes/cytology , Hyaluronic Acid/chemistry , Biocompatible Materials , QuartzABSTRACT
OBJECTIVES: Bone is innervated by autonomic nervous system that consists of sympathetic and parasympathetic nerves that were recently identified in bone. Thus we asked whether parasympathetic nerves occur in bone defects and at the interface of substitution materials that were implanted for stabilization and improvement of healing in an osteoporosis animal model. METHODS: Osteoporosis was induced in rats by ovariectomy and deficiency diet. A wedge-shaped osteotomy was performed in the metaphyseal area of femur. Eight different implants were inserted that were based on calcium phosphate cement, iron, silica-mineralized collagen, and modifications with strontium. Nerves were identified by immunohistochemistry with antibodies against vesicular acetylcholine transporter (VAChT), tyrosine hydroxylase (TH) and protein gene product 9.5 (PGP 9.5) as neuronal marker. RESULTS: Cholinergic nerves identified with VAChT immunostaining were detected in defects filled with granulation tissue and in surrounding mast cells. No immunolabeling of cholinergic nerves was found after implantation. The general presence of nerves was reduced after implantation as shown by PGP 9.5. Sympathetic nerves identified by TH immunolabeling were increased in strontium functionalized materials. CONCLUSION: Since cholinergic innervation was diminished after implantation a further increase in the compatibility of substitution materials to nerves could improve defect healing especially in osteoporotic bone.
Subject(s)
Bone Substitutes/adverse effects , Bone and Bones/innervation , Cholinergic Fibers/drug effects , Osteoporosis, Postmenopausal , Animals , Disease Models, Animal , Female , Humans , Immunohistochemistry , Ovariectomy , Rats , Rats, Sprague-DawleyABSTRACT
In this study we investigated the potential of artificial extracellular matrix (aECM) coatings containing collagen II and two types of glycosaminoglycan (GAGs) with different degrees of sulphation to promote human bone formation in biomedical applications. To this end their impact on growth and osteogenic differentiation of human mesenchymal stem cells (hMSCs) was assessed. The cell proliferation was found to be significantly retarded in the first 14 days of culture on surfaces coated with collagen II and GAGs (coll-II/GAG) as compared to tissue culture polystyrol (TCPS) and those coated with collagen II. At later time points it only tended to be retarded on coll-II/sHya3.1. Heat-inactivation of the serum significantly reduced cell numbers on collagen II and coll-II/sHya3.1. Alkaline phosphatase (ALP) activity and calcium deposition, on the other hand, were higher for coatings containing sHya3.1 and were not significantly changed by heat-inactivation of the serum. Expression levels of the bone matrix proteins bone sialoprotein (BSP-II) and osteopontin (OP) were also increased on aECM coatings as compared to TCPS, which further validated the differentiation of hMSCs towards the osteogenic lineage. These observations reveal that aECM coatings, in particular those containing sHya3.1, are suitable to promote the osteogenic differentiation of hMSCs.
Subject(s)
Cell Differentiation/drug effects , Collagen/metabolism , Dexamethasone/pharmacology , Extracellular Matrix/metabolism , Hyaluronic Acid/metabolism , Mesenchymal Stem Cells/cytology , Sulfates/chemistry , Adult , Alkaline Phosphatase/metabolism , Base Sequence , Calcium/metabolism , Cells, Cultured , DNA Primers , Humans , Hyaluronic Acid/chemistry , Mesenchymal Stem Cells/enzymology , Mesenchymal Stem Cells/metabolism , Reverse Transcriptase Polymerase Chain Reaction , Young AdultABSTRACT
An improved osseous integration of dental implants in patients with lower bone quality is of particular interest. The aim of this study was to evaluate the effect of artificial extracellular matrix implant coatings on early bone formation. The coatings contained collagen (coll) in conjunction with either chondroitin sulfate (CS) or sulfated hyaluronan (sHya). Thirty-six screw-type, grit-blasted, and acid-etched titanium implants were inserted in the mandible of 6 minipigs. Three surface states were tested: (1) uncoated control (2) coll/CS (3) coll/sHya. After healing periods of 4 and 8 weeks, bone implant contact (BIC), bone volume density (BVD) as well as osteoid related parameters were measured. After 4 weeks, control implants showed a BIC of 44% which was comparable to coll/CS coated implants (48%) and significantly higher compared to coll/sHya coatings (37%, p = 0.012). This difference leveled out after 8 weeks. No significant differences could be detected for BVD values after 4 weeks and all surfaces showed reduced BVD values after 8 weeks. However, at that time, BVD around both, coll/CS (30%, p = 0.029), and coll/sHya (32%, p = 0.015), coatings was significantly higher compared to controls (22%). The osteoid implant contact (OIC) showed no significant differences after 4 weeks. After 8 weeks OIC for controls was comparable to coll/CS, the latter being significantly higher compared to coll/sHya (0.9% vs. 0.4%, p = 0.012). There were no significant differences in osteoid volume density. In summary, implant surface coatings by the chosen organic components of the extracellular matrix showed a certain potential to influence osseointegration in vivo.
Subject(s)
Bone Development , Chondroitin Sulfates/chemistry , Coated Materials, Biocompatible , Collagen/chemistry , Hyaluronic Acid/chemistry , Models, Animal , Prostheses and Implants , Animals , Swine , Swine, MiniatureABSTRACT
The present study examined the impact of implant surface modifications on osseointegration in an osteoporotic rodent model. Sandblasted, acid-etched titanium implants were either used directly (control) or were further modified by surface conditioning with NaOH or by coating with one of the following active agents: collagen/chondroitin sulphate, simvastatin, or zoledronic acid. Control and modified implants were inserted into the proximal tibia of aged ovariectomised (OVX) osteoporotic rats (n = 32/group). In addition, aged oestrogen competent animals received either control or NaOH conditioned implants. Animals were sacrificed 2 and 4 weeks post-implantation. The excised tibiae were utilised for biomechanical and morphometric readouts (n = 8/group/readout). Biomechanical testing revealed at both time points dramatically reduced osseointegration in the tibia of oestrogen deprived osteoporotic animals compared to intact controls irrespective of NaOH exposure. Consistently, histomorphometric and microCT analyses demonstrated diminished bone-implant contact (BIC), peri-implant bone area (BA), bone volume/tissue volume (BV/TV) and bone-mineral density (BMD) in OVX animals. Surface coating with collagen/chondroitin sulphate had no detectable impact on osseointegration. Interestingly, statin coating resulted in a transient increase in BIC 2 weeks post-implantation; which, however, did not correspond to improvement of biomechanical readouts. Local exposure to zoledronic acid increased BIC, BA, BV/TV and BMD at 4 weeks. Yet this translated only into a non-significant improvement of biomechanical properties. In conclusion, this study presents a rodent model mimicking severely osteoporotic bone. Contrary to the other bioactive agents, locally released zoledronic acid had a positive impact on osseointegration albeit to a lesser extent than reported in less challenging models.
Subject(s)
Implants, Experimental , Osseointegration , Osteoporosis/pathology , Animals , Biomechanical Phenomena/drug effects , Diphosphonates/pharmacology , Disease Models, Animal , Female , Fluorescent Dyes/metabolism , Imidazoles/pharmacology , Osseointegration/drug effects , Osteoporosis/diagnostic imaging , Rats , Rats, Wistar , Simvastatin/pharmacology , X-Ray Microtomography , Zoledronic AcidABSTRACT
Glycosaminoglycans (GAG) such as hyaluronan (HA) or chondroitin/dermatan sulfate (CS/DS) occur in many connective tissues, for instance, in bone, cartilage and skin. Due to their significant water-binding capacity, GAG are essential for the biomechanical properties of these tissues. However, there is also increasing evidence that the sulfation of GAG does not occur at random, but a "sulfation code" exists that mediates the physiological functions of GAG. Thus, the biological properties of these biomacromolecules are strongly influenced by the degree of sulfation (ds) and the sulfate group distribution along the polymer. Therefore, certain GAG might also have interesting pharmacological properties. It is, thus, commonly accepted that GAG represent promising biomaterials in the field of tissue engineering as well as to design new bioactive materials for tissue repair and reconstruction. In this review we will focus on chemically sulfated GAG and provide a survey of these compounds on four different levels. First, we will provide an overview on chemical functionalization strategies of naturally occurring HA and CS/DS with special emphasis on regioselective methods to introduce a defined number of sulfate residues into the carbohydrate backbone. Second, chemical and biochemical methods to characterize the synthesized compounds will be introduced with the focus on methods based on nuclear magnetic resonance (NMR) and mass spectrometry (MS). In the third part, we will discuss the interaction of natural and chemically sulfated GAG with proteins and other biomolecules with regulatory functions. Additionally, biological consequences of these interactions regarding healing processes of skin and bone will be presented by discussing selected cell culture experiments. Finally, in vivo effects of GAG as components of artificial extracellular matrices will be discussed.
Subject(s)
Connective Tissue/physiology , Glycosaminoglycans/chemistry , Regeneration , Sulfates/chemistry , Animals , Extracellular Matrix/metabolism , Glycosaminoglycans/biosynthesis , Glycosaminoglycans/chemical synthesis , Protein Binding , Proteins/chemistry , Proteins/metabolism , Stereoisomerism , Tissue EngineeringABSTRACT
In this study, we analyzed poly(L-lactide-co-glycolide) (PLGA) scaffolds modified with artificial extracellular matrices (aECM) consisting of collagen type I, chondroitin sulphate, and sulphated hyaluronan (sHya). We investigated the effect of these aECM coatings on proliferation and osteogenic differentiation of human mesenchymal stem cells (hMSC) in vitro. We found that scaffolds were homogeneously coated, and cross-linking of aECM did not significantly influence the amount of collagen immobilized. Cell proliferation was significantly increased on cross-linked surfaces in expansion medium (EM), but was retarded on cross-linked and non-cross-linked collagen/sHya coatings. The alkaline phosphatase activity was increased on sHya-containing coatings in EM even without the presence of differentiation supplements, but was six to ten times higher in differentiation medium (DM) and comparable for cross-linked and non-cross-linked collagen/sHya. The highest amount of calcium phosphate mineral was deposited on day 28 on cross-linked collagen/sHya. Therefore, coatings of PLGA scaffolds with collagen/sHya promoted the osteogenic differentiation of hMSCs in vitro and might be an interesting candidate for the modification of PLGA for bone reconstruction in vivo.
Subject(s)
Cell Differentiation/drug effects , Collagen/pharmacology , Glycosaminoglycans/pharmacology , Mesenchymal Stem Cells/cytology , Osteogenesis/drug effects , Polyglactin 910/pharmacology , Tissue Scaffolds/chemistry , Adult , Alkaline Phosphatase/metabolism , Animals , Calcium/metabolism , Cell Adhesion/drug effects , Cell Count , Cell Proliferation/drug effects , Cell Shape/drug effects , Cells, Cultured , Coated Materials, Biocompatible/pharmacology , Densitometry , Extracellular Matrix/drug effects , Extracellular Matrix/metabolism , Humans , Male , Mesenchymal Stem Cells/drug effects , Mesenchymal Stem Cells/enzymology , Microscopy, Electron, Scanning , Rats , Young AdultABSTRACT
Glycosaminoglycans (GAG) are multifunctional components of the extracellular matrix (ECM) involved in different steps of the regulation of cellular differentiation. In this study artificial extracellular matrices (aECM) consisting of collagen (Col) I and different GAG derivatives were used as a substrate for human mesenchymal stromal cells (hMSC) to study osteogenic differentiation in vitro. hMSC were cultured on aECM containing col and hyaluronan sulfates (HyaS) with increasing degrees of sulfation (DS(S)) and were compared with aECM containing col and the natural GAG hyaluronan or chondroitin 4-sulfate. hMSC were analyzed for osteogenic differentiation markers such as calcium phosphate deposition, tissue non-specific alkaline phosphatase (TNAP) and expression of runt-related transcription factor 2 (runx2), osteocalcin (ocn) and bone sialoprotein II (bspII). Compared with aECM containing Col and natural GAG all Col/HyaS-containing aECM induced an increase in calcium phosphate deposition, TNAP activity and tnap expression. These effects were also seen in the absence of dexamethasone (an established osteogenic supplement). The expression of runx2 and ocn was not altered and the expression of bspII was diminished on the col/HyaS-containing aECM. The impact of the Col/HyaS-containing aECM on hMSC differentiation was independent of the DS(S) of the HyaS derivatives, indicating the importance of the primary (C-6) hydroxyl group of N-acetylglucosamine. These results suggest that Col/HyaS-containing aECM are able to stimulate hMSC to undergo osteogenic differentiation even in the absence of dexamethasone, which makes these matrices an interesting tool for hMSC-based tissue engineering applications and biomaterial functionalizations to enhance bone formation.
Subject(s)
Cell Differentiation/drug effects , Collagen Type I/pharmacology , Dexamethasone/pharmacology , Hyaluronic Acid/pharmacology , Mesenchymal Stem Cells/cytology , Sulfates/pharmacology , Adult , Alkaline Phosphatase/genetics , Alkaline Phosphatase/metabolism , Animals , Calcium Phosphates/metabolism , Core Binding Factor Alpha 1 Subunit/genetics , Core Binding Factor Alpha 1 Subunit/metabolism , Extracellular Matrix/drug effects , Extracellular Matrix/metabolism , Gene Expression Regulation/drug effects , Glycosaminoglycans/chemistry , Glycosaminoglycans/metabolism , Humans , Hyaluronic Acid/chemical synthesis , Hyaluronic Acid/chemistry , Integrin-Binding Sialoprotein/genetics , Integrin-Binding Sialoprotein/metabolism , Male , Mesenchymal Stem Cells/drug effects , Mesenchymal Stem Cells/enzymology , Osteocalcin/genetics , Osteocalcin/metabolism , Osteogenesis/drug effects , Rats , Staining and LabelingABSTRACT
This study demonstrates that the modification of hyaluronan (hyaluronic acid; Hya) and chondroitin sulfate (CS) with sulfate groups leads to different binding affinities for recombinant human transforming growth factor-ß1 (TGF-ß1) for comparable average degrees of sulfation (DS). In general, Hya derivates showed higher binding strength than CS derivatives. In either case, a higher degree of sulfation leads to a stronger interaction. The high-sulfated hyaluronan sHya3 (average DS≈3) exhibited the tightest interaction with TGF-ß1, as determined by surface plasmon resonance and enzyme-linked immunosorbent assay. The binding strength was significantly weakened by carboxymethylation. Unmodified Hya and low-sulfated, native CS showed weak or no binding affinity. The interaction characteristics of the different sulfated glycosaminoglycans are promising for incorporation into bioengineered coatings of biomaterials to modulate growth factor binding in medical applications.
Subject(s)
Chondroitin Sulfates/chemistry , Hyaluronic Acid/chemistry , Transforming Growth Factor beta1/chemistry , Enzyme-Linked Immunosorbent Assay , Magnetic Resonance Spectroscopy , Spectroscopy, Fourier Transform Infrared , Sulfates/chemistry , Surface Plasmon ResonanceABSTRACT
BACKGROUND: This investigation describes experimental tests of the biomechanical features of a new resorbable bone adhesive based on methacrylate-terminated oligolactides enhanced with osteoconductive ß-tricalcium phosphate. MATERIAL AND METHODS: 51 New Zealand white rabbits were randomised to an adhesive group (n = 29) and a control group (n = 22). An extra-articular bone cylinder was taken from the proximal tibia, two stripes of adhesive were applied and the cylinders were replanted. After 10 and 21 days, 3 and 12 months tibial specimens were harvested and the cylinder pull-out test was performed with a servo-hydraulic machine. Additionally the pull-out force was evaluated with the bone-equivalent Ebazell® after 5, 10 and 360 minutes in 14 specimens each. RESULTS: Average pull-out forces in the adhesive group were 28 N after 10 days (control: 57 N), 155 N after 21 days (216 N), 184 N after 3 months (197 N) and 205 N after 12 months (185 N). Investigations with Ebazell® showed almost identical pull-out forces after 5 min, 15 min and 360 min. Adhesive forces were as high as 125 N/cm (2) of adhesive surface and more than 1200 N/g of adhesive mass. CONCLUSIONS: The adhesive investigated here has a very good primary adhesive power, compared to the literature data, achieved after only 5 minutes. Even in moist surroundings the adhesive capacity remains sufficient. The adhesive has to prove its resorptive properties in further investigations and in first line its medium-term and long-lasting biocompatibility. Furthermore, biomechanical features will have to be compared to those of conventional fixation techniques.
Subject(s)
Biocompatible Materials , Biomechanical Phenomena , Bone Cements , Bone Transplantation , Calcium Phosphates , Tibia/physiopathology , Tibia/surgery , Animals , Cone-Beam Computed Tomography , Image Processing, Computer-Assisted , Imaging, Three-Dimensional , In Vitro Techniques , Osseointegration/physiology , Tensile Strength , Tibia/diagnostic imagingABSTRACT
Thin-layer chromatography (TLC) is a simple, fast and inexpensive separation method. Unambiguous identification of the TLC spots is, however, often a problem. Here we show for the first time that oligosaccharides (derived from dextran, alginate, hyaluronan and chondroitin sulfate) can be characterized by matrix-assisted laser desorption and ionization time-of-flight (MALDI-TOF) mass spectrometry (MS) directly on a TLC plate. The applied oligosaccharides were either commercially available or obtained from the polysaccharides by HCl-induced hydrolysis. Normal phase TLC was followed by MALDI-TOF MS subsequent to matrix deposition. It will be shown that high quality mass spectra can be obtained that enable unequivocal assignments. It will also be shown that the high content of formic acid in the solvent system does not confer major problems but is responsible for the partial formylation of the analyte and minor N-acetyl loss from hyaluronan and chondroitin sulfate.
Subject(s)
Chromatography, Thin Layer/methods , Oligosaccharides/chemistry , Spectrometry, Mass, Matrix-Assisted Laser Desorption-Ionization/methods , Alginates/chemistry , Chondroitin/chemistry , Dextrans/chemistry , Glucuronic Acid/chemistry , Hexuronic Acids/chemistry , Hyaluronic Acid/chemistry , Hydrochloric Acid/chemistry , HydrolysisABSTRACT
In this work, a novel bioresorbable bone adhesive based on radically polymerizable polylactide with methacrylate endgroups known from polymethylmethacrylate (PMMA) cements and varying amounts of bioresorbable/biodegradable lactide moieties was developed. The swelling and degradation properties as well as the hardening time, viscosity, and adhesion properties (tension and shear resistance) were subsequently measured in vitro and optimized. For a broad use in surgery the handling properties, the shelf life and the storage temperature are important issues. The finally developed material consists of three substances that have to be mixed to start the reaction: a highly viscous mixture of oligomers and two beta-tricalcium phosphate (beta-TCP, Cerasorb) powders with the radical starter and the promoter. The material has a processing time of 2 min and is completely cured after another minute. The tension and shear resistance of the material is 3.1-13.9 MPa that will decrease by storing the substance in a humid atmosphere. Degradation experiments showed a mass loss of 20-35% during the first 5 weeks. Tests with MC3T3-E1 cells showed an increase of the alkaline phosphatase activity over a period of 14 days. The mechanical and handling properties and the in vitro data are showing a promising biomaterial for bone regeneration.
Subject(s)
Biocompatible Materials , Bone Cements , Calcium Phosphates/chemistry , Methacrylates/chemistry , 3T3 Cells , Animals , Materials Testing , Mice , Microscopy, Electron, Scanning , Spectrometry, Mass, Matrix-Assisted Laser Desorption-Ionization , Spectroscopy, Fourier Transform Infrared , X-Ray DiffractionABSTRACT
Advanced surface modifications and materials were tested on the same implant geometry. Six types of dental implants were tested for osseointegration after 2, 4 and 8 weeks in a sheep pelvis model. Four titanium implant types were treated with newly developed surface modifications, of which two were chemically and two were pharmacologically modified. One implant was made of zirconia. A sandblasted and acid-etched titanium surface was used as reference. The chemically modified implants were plasma-anodized or coated with calcium phosphate. The pharmacological coatings contained either bisphosphonate or collagen type I with chondroitin sulphate. The implants were evaluated using macroscopic, radiographic and histomorphometric methods. All implants were well osseointegrated at the time of death. All titanium implants had similar bone implant contact (BIC) at 2 weeks (57-61%); only zirconia was better (77%). The main BIC increase was between 2 and 4 weeks. The pharmacologically coated implants (78-79%) and the calcium phosphate coating (83%) showed similar results compared with the reference implant (80%) at 8 weeks. There were no significant differences in BIC. Compared with previous studies the results of all implants were comparatively good.
Subject(s)
Dental Implants , Dental Materials/chemistry , Dental Prosthesis Design , Titanium/chemistry , Zirconium/chemistry , Acid Etching, Dental/methods , Animals , Bone Remodeling/physiology , Calcium Phosphates/chemistry , Chondroitin Sulfates/chemistry , Coated Materials, Biocompatible/chemistry , Collagen Type I/chemistry , Dental Etching/methods , Diphosphonates/chemistry , Electrochemical Techniques , Fluorescent Dyes , Ilium/pathology , Ilium/surgery , Materials Testing , Models, Animal , Osseointegration/physiology , Sheep , Surface Properties , Time Factors , Wound Healing/physiologyABSTRACT
PURPOSE: The separation of tumor cells from healthy cells is a vital problem in oncology and hematology, especially from peripheral blood. Magnetic assisted cell sorting (MACS) is a possibility to fulfill these needs. METHODS: Tumor cell lines and leukocytes from peripheral blood were incubated with carboxymethyl dextran-coated magnetic nanoparticles under various conditions and separated by MACS. RESULTS: We studied the interaction of magnetic nanoparticles devoid of antibodies with healthy and tumor cells. The magnetic nanoparticles interact with tumor cells and leukocytes and are located predominantly within the cell cytoplasm. Incubation of cell culture cells with magnetic nanoparticles led to a labeling of these cells without reduced biological properties for at least 14 days. The interaction of the magnetic nanoparticles with cells depends on several factors. The ionic strength (osmolality) of the solvent plays an important role. We could show that an increase in osmolality led to a dramatic reduction of labeled leukocytes. Tumor cells, however, are mildly affected. This could be detected not only in pure cultures of tumor cells or leukocytes but also in mixed cell populations. CONCLUSION: This observation gives us the opportunity to selectively label and separate tumor cells but not leukocytes from the peripheral blood.