A water probe for direct pH measurement of individual particles via micro-Raman spectroscopy.

The acidity of atmospheric aerosols influences fundamental physicochemical processes that affect climate and human health. We recently developed a novel and facile water-probe-based method for directly measuring of the pH for micrometer-size droplets, providing a promising technique to better understand aerosol acidity in the atmosphere. The complex chemical composition of fine particles in the ambient air, however, poses certain challenges to using a water-probe for pH measurement, including interference from interactions between compositions and the influence of similar compositions on water structure. To explore the universality of our method, it was employed to measure the pH of ammonium, nitrate, carbonate, sulfate, and chloride particles. The pH of particles covering a broad range (0-14) were accurately determined, thereby demonstrating that our method can be generally applied, even to alkaline particles. Furthermore, a standard spectral library was developed by integrating the standard spectra of common hydrated ions extracted through the water-probe. The library can be employed to identify particle composition and overcome the spectral overlap problem resulting from similar effects. Using the spectral library, all ions were identified and their concentrations were determined, in turn allowing successful pH measurement of multicomponent (ammonium-sulfate-nitrate-chloride) particles. Insights into the synergistic effect of Cl-, NO3-, and NH4+ depletion obtained with our approach revealed the interplay between pH and volatile partitioning. Given the ubiquity of component partitioning and pH variation in particles, the water probe may provide a new perspective on the underlying mechanisms of aerosol aging and aerosol-cloud interaction.

The mechanisms of pH regulation on promoting volatile fatty acids production from kitchen waste.

The anaerobic acid production experiments were conducted with the pretreated kitchen waste under pH adjustment. The results showed that pH 8 was considered to be the most suitable condition for acid production, especially for the formation of acetic acid and propionic acid. The average value of total volatile fatty acid at pH 8 was 8814 mg COD/L, 1.5 times of that under blank condition. The average yield of acetic acid and propionic acid was 3302 mg COD/L and 2891 mg COD/L, respectively. The activities of key functional enzymes such as phosphotransacetylase, acetokinase, oxaloacetate transcarboxylase and succinyl-coA transferase were all enhanced. To further explore the regulatory mechanisms within the system, the distribution of microorganisms at different levels in the fermentation system was obtained by microbial sequencing, results indicating that the relative abundances of Clostridiales, Bacteroidales, Chloroflexi, Clostridium, Bacteroidetes and Propionibacteriales, which were great contributors for the hydrolysis and acidification, increased rapidly at pH 8 compared with the blank group. Besides, the proportion of genes encoding key enzymes was generally increased, which further verified the mechanism of hydrolytic acidification and acetic acid production of organic matter under pH regulation.

Removal of signal peptide variants by cation exchange chromatography: A case study.

Signal peptide (SP) is required for secretion of recombinant proteins and typically cleaved by signal peptidase at its C-region to generate the mature proteins. Miscleavage of the SP is reported occasionally, resulting in a truncated- or elongated-terminal sequence. In the present work, we demonstrated that cation exchange (CEX) chromatography is an effective means for removing SP variants with a case study. With the selected resin/conditions, the chromatographic performance is comparable between runs performed at the low end and high end of load density and elution range. The procedure described in this work can be used as a general approach for resin selection and optimization of chromatographic conditions to remove byproducts that bind more strongly than the product to the selected resin.

Microfluidic paper-based analytical device for measurement of pH using as sensor red cabbage anthocyanins and gum arabic.

The objective of this study was to develop and validate a novel microfluidic paper-based analytical device (µPADpH) for determining the pH levels in foods. Anthocyanins from red cabbage aqueous extract (RCAE) were used as its analytical sensor. Whatman No. 1 filter paper was the most suitable for the device due to its porosity and fiber organization, which allows for maximum color intensity and minimal color heterogeneity of the RCAE in the detection zone of the µPADpH. To ensure the color stability of the RCAE for commercial use of the µPADpH, gum arabic was added. The geometric design of the µPADpH, including the channel length and separation zone diameter, was systematically optimized using colored food. The validation showed that the µPADpH did not differ from the pH meter when analyzing natural foods. However, certain additives in processed foods were found to increase the pH values.

A pH switchable hydrophilic fluorescent BODIPY sodium disulfonate for Fe3+ multicolor detection: Experimental and DFT studies.

BODIPY-based chemosensors are widely used owing to merits like good selectivity, high fluorescence quantum yield, and excellent optical stability. As such, a pH-switchable hydrophilic fluorescent probe, BODIPY-PY-(SO3Na)2, was developed for detection of Fe3+ ion in aqueous solutions. BODIPY-PY-(SO3Na)2 revealed strong fluorescence intensity and was responsive to pH value in the range of 6.59-1.96. Additionally, BODIPY-PY-(SO3Na)2 showed good selectivity and sensitivity towards Fe3+. A good linear relationship for Fe3+ detection was obtained from 0.0 µM to 50.0 µM with low detecting limit of 6.34 nM at pH 6.59 and 2.36 nM at pH 4.32, respectively. The response to pH and detection of Fe3+ induced obvious multicolor changes. BODIPY-PY-(SO3Na)2 can also be utilized to quantitatively detect Fe3+ in real water sample. Different mechanisms of Fe3+ detection at investigated pH values were unraveled through relativistic density functional theory (DFT) calculations in BODIPY-PY-(SO3Na)2 and experiments of coexisting cations, anions and molecules. These results enabled us to gain a deeper understanding of the interactions between BODIPY-PY-(SO3Na)2 and Fe3+ and provide valuable fundamental information for design of efficient multicolor chemosensors for Fe3+ as well.

Microplastics originated from agricultural mulching films affect enchytraeid multigeneration reproduction and soil properties.

Microplastics (MPs) are increasingly entering agricultural soils, often from the breakdown of agricultural plastics (e.g., mulching films). This study investigates the effects of realistic MPs from different mulching films: two conventional polyethylene (PE-1 and PE-2) and two biodegradable (starch-blended polybutylene adipate co-terephthalate; PBAT-BD-1 and PBAT-BD-2). MPs were mixed into Lufa 2.2 soil at a concentration range from 0.005 % to 5 % (w/w dry soil), wide enough to reflect both realistic environmental levels and "worst-case scenarios". Effects on Enchytraeus crypticus reproduction over two generations and six important soil properties were studied. PBAT MPs notably reduced enchytraeid reproduction in the F0 generation, with a maximum decrease of 35.5 ± 9.6 % at 0.5 % concentration. F1 generation was unaffected by PBAT contamination. PE MPs had a more substantial reproductive impact, with up to a 55.3 ± 9.7 % decrease at 5 % PE-1 concentration compared to the control, showing a dose-related effect except for 1 %. Both MP types also significantly affected soil water holding capacity, pH, and total carbon. Other soil properties remained unaffected. Our results highlight the potential negative impacts of MPs originating from real agricultural plastics on soil health and raise concerns about the role of agricultural plastics in sustainable agriculture and food safety.

Mechanism study of Dual-Emission ratiometric fluorescent pH-Sensitive carbon quantum dots and its application on mornitoring enzymatic catalysis.

Carbon dots (CQD) have received significant attention as a novel ratiometric fluorescent pH nanoprobe, owing to their favorable optical properties and excellent biocompatibility. Despite their appealing features, the precise mechanism behind the pH-sensitive photoluminescence of CQDs remains to be fully understood. This study endeavors to unravel the mechanism underlying the pH-responsive ratiometric fluorescence in dual-emission CQDs, synthesized through a one-step hydrothermal method using o-phenylenediamine and oxalic acid as precursors. The resultant CQDs exhibit inherent dual-emission at wavelengths of 383 nm and 566 nm, with the ratiometric fluorescence response tailored by the ratio of precursors, providing a robust tool for pH sensing across a range of 2 to 6. Detailed characterizations, including chemical, morphological, and optical analyses, alongside theoretical insights from time-dependent density functional theory (TD-DFT), elucidate the mechanism underlying the pH-dependent luminescence, attributed to the electron cloud transmission between amide and adjacent carboxyl groups on the CQD surface. The superior performance of these CQDs in real-time pH monitoring is demonstrated through their application in glucose oxidase-catalyzed reactions, showcasing their potential as efficient, reliable nanoprobes for biomedical research and diagnostic applications.

Ruminal acidosis and its definition: A critical review.

Ruminal acidosis occurs as a continuum of disorders, stemming from ruminal dysbiosis and disorders of metabolism, of varying severity. The condition has a marked temporal dynamic expression resulting in cases expressing quite different rumen concentrations of VFA, lactic acid, ammonia, and rumen pH over time. Clinical ruminal acidosis is an important condition of cattle and subclinical ruminal acidosis (SRA) is very prevalent in many dairy populations with estimates between 10 to 26% of cows in early lactation. Estimates of the duration of a case suggest the lactational incidence of the condition may be as high as 500 cases per 100 cows in the first 100 d of lactation. Historical confusion about the etiology and pathogenesis of ruminal acidosis led to definitions that are not fit for purpose as acidic ruminal conditions solely characterized by ruminal pH determination at a single point fail to reflect the complexity of the condition. Use of a model, based on integrated ruminal measures including VFA, ammonia, lactic acid, and pH, for evaluating ruminal acidosis is fit for purpose, as indicated by meeting postulates for assessing metabolic disease, but requires a method to simplify application in the field. While it is likely that this model, that we have termed the Bramley Acidosis Model (BAM), will be refined, the critical value in the model is that it demonstrates that ruminal acidosis is much more than ruminal pH. Disease, milk yield and milk composition are more associated with the BAM than rumen pH alone. Two single VFA, propionate and valerate are sensitive and specific for SRA, especially when compared with rumen pH. Even with the use of such a model, astute evaluations of the condition whether in experimental or field circumstances will be aided by ancillary measures that can be used in parallel or in series to enhance diagnosis and interpretation. Sensing methods including rumination detection, behavior, milk analysis, and passive analysis of rumen function have the potential to improve the detection of SRA; however, these may advance more rapidly if SRA is defined more broadly than by ruminal pH alone.

ExoJ: an ImageJ2/Fiji plugin for automated spatiotemporal detection and analysis of exocytosis.

Exocytosis is a dynamic physiological process that enables the release of biomolecules to the surrounding environment via the fusion of membrane compartments to the plasma membrane. Understanding its mechanisms is crucial, as defects can compromise essential biological functions. The development of pH-sensitive optical reporters alongside fluorescence microscopy enables the assessment of individual vesicle exocytosis events at the cellular level. Manual annotation represents, however, a time-consuming task, prone to selection biases and human operational errors. Here, we introduce ExoJ, an automated plugin based on ImageJ2/Fiji. ExoJ identifies user-defined genuine populations of exocytosis events, recording quantitative features including intensity, apparent size and duration. We designed ExoJ to be fully user-configurable, making it suitable to study distinct forms of vesicle exocytosis regardless of the imaging quality. Our plugin demonstrates its capabilities by showcasing distinct exocytic dynamics among tetraspanins and vesicular SNAREs protein reporters. Assessment of performance on synthetic data showed ExoJ is a robust tool, capable to correctly identify exocytosis events independently of signal-to-noise ratio conditions. We propose ExoJ as a standard solution for future comparative and quantitative studies of exocytosis.

Improving standardization and accuracy of in vivo omega plot exchange parameter determination using rotating-frame model-based fitting of quasi-steady-state Z-spectra.

PURPOSE: Although Ω-plot-driven quantification of in vivo amide exchange properties has been demonstrated, differences in scan parameters may complicate the fidelity of determination. This work systematically evaluated the use of quasi-steady-state (QUASS) Z-spectra reconstruction to standardize in vivo amide exchange quantification across acquisition conditions and further determined it in vivo. METHODS: Simulation and in vivo rodent brain chemical exchange saturation transfer (CEST) data at 4.7 T were fit with and without QUASS reconstruction using both multi-Lorentzian and model-based fitting approaches. pH modulation was accomplished both in simulation and in vivo by inducing global ischemia via cardiac arrest. Amide parameters were determined via Ω-plots and compared across methods. RESULTS: Simulation showed that Ω-plots using multi-Lorentzian fitting could underestimate the exchange rate, with error increasing as conditions diverged from the steady state. In comparison, model-based fitting using QUASS estimated the same exchange rate within 2%. These results aligned with in vivo findings where multi-Lorentzian fitting of native Z-spectra resulted in an exchange rate of 64 ± 13 s-1 (38 ± 16 s-1 after cardiac arrest), whereas model-based fitting of QUASS Z-spectra yielded an exchange rate of 126 ± 25 s-1 (49 ± 13 s-1). CONCLUSION: The model-based fitting of QUASS CEST Z-spectra enables consistent and accurate quantification of exchange parameters through Ω-plot construction by reducing error due to signal overlap and nonequilibrium CEST effects.

Effects of pH on coprecipitation of As(III) with biogenic synthesized schwertmannite and jarosite.

Secondary iron minerals play significant roles in the immobilization of As under acidic conditions, such as acid mine drainage. However, previous research works have not clarified the effect of pH on As(III) removal through coprecipitation with secondary minerals. Therefore, in this study, we aimed to investigate the discrepancy in As(III) coprecipitation with biogenic synthesized schwertmannite (Sch) and jarosite (Jar) at different pH values. For this, concentrations of Fe2+, TFe, SO42-, and As(III) in shake flasks were monitored during an overall incubation period of 83 h at initial pH of 1.5, 2.0, and 2.5. In addition, the physicochemical properties of collected minerals after incubation were identified using scanning electron microscopy, X-ray diffraction, pore size distribution, and Brunauer - Emmett - Teller surface area analyses. Our results showed that almost no mineral synthesis and no As(III) removal were detected in coprecipitated schwertmannite (Co-Sch) system and coprecipitated jarosite (Co-Jar) system at an initial pH of 1.5. The TFe precipitation efficiencies and As(III) removal efficiencies increased considerably and morphologies of Co-Sch and Co-Jar improved significantly when the initial pH value increased from 2.0-2.5. The maximum TFe precipitation efficiency and As(III) removal efficiency reached 30.8% and 89.6%, respectively, for the Co-Sch system, and were 47.5% and 37.4%, respectively, for the Co-Jar system. The overall results show that pH significantly affects the formation of Co-Sch and Co-Jar and the behaviour of As(III) coprecipitation.

Effect of blue light emitting diode therapy on recurrent vulvovaginal candidiasis: A randomized assessor-blinded controlled trial.

OBJECTIVE: Vulvovaginal Candidiasis (VVC) is a prevalent genital infection in women of reproductive age and requires effective non-drug therapies. Therefore, this study aimed to investigate the effect of blue light emitting diode (LED) therapy as an alternative treatment for recurrent VVC due to its proven antimicrobial properties. The safety and non-invasiveness of LED therapy make it a promising option for sensitive tissue applications. MATERIALS AND METHODS: This randomized controlled trial recruited 60 women with culture-confirmed VVC. Participants were randomly allocated to two groups. Group A (control group) received standard antifungal treatment with Gynoconazol 0.8% vaginal cream for three consecutive nights (n = 30). Group B (study group) received the same antifungal treatment plus two 60-min sessions of blue LED therapy directed at the vagina and vulva, with the sessions separated by two days (n = 30). Candida count (via CHROMagar™ Candida) and vaginal pH (via AD110-AD111 m) were assessed at baseline and one week after initiating treatment. RESULTS: Post-treatment, group (B) demonstrated a significantly greater reduction in Candida count compared to group (A) (mean difference (MD) 8.267; 95% Confidence Interval (CI) 6.723-9.811; p = 0.0001). However, there was no statistically significant difference in vaginal pH between the groups (MD -0.03; 95% CI -0.244-0.178; p = 0.749). CONCLUSION: Blue LED therapy effectively reduces Candida count in women with recurrent VVC without adversely affecting the vaginal pH, highlighting its safety and efficacy as a treatment modality.

Novel Supramolecular Hydrogel for Infected Diabetic Foot Ulcer Treatment.

Multifunctional responsive hydrogels hold significant promise for diabetic foot ulcer (DFU) treatment, though their complex design and manufacturing present challenges. This study introduces a novel supramolecular guanosine-phenylboronic-chlorogenic acid (GBC) hydrogel developed using a dynamic covalent strategy. The hydrogel forms through guanosine quadruplex assembly in the presence of potassium ions and chlorogenic acid (CA) linkage via dynamic borate bonds. GBC hydrogels exhibit pH and glucose responsiveness, releasing more chlorogenic acid under acidic and high glucose conditions due to borate bond dissociation and G-quadruplex (G4) hydrogel disintegration. Experimental results indicate that GBC hydrogels exhibit good self-healing, shear-thinning, injectability, and swelling properties. Both in vitro and in vivo studies demonstrate the GBC hydrogel's good biocompatibility, ability to eliminate bacteria and reactive oxygen species (ROS), facilitate macrophage polarization from the M1 phenotype to the M2 phenotype (decreasing CD86 expression and increasing CD206 expression), exhibit anti-inflammatory effects (reducing TNF-α expression and increasing IL-10 expression), and promote angiogenesis (increasing VEGF, CD31, and α-SMA expression). Thus, GBC hydrogels accelerate DFU healing and enhance tissue remodeling and collagen deposition. This work provides a new approach to developing responsive hydrogels to expedite DFU healing.

Novel pH-Responsive Structural Rearrangement of Myristic Acid-Conjugated Quetiapine Nanosuspension for Enhanced Long-Acting Delivery Performance.

Quetiapine myristate (QM), an ester-bonded lipophilic prodrug of quetiapine (QTP), is synthesized and converted into an amphiphilic structure in acidic pH to trigger a novel self-assembled QM nanosuspension (QMN). Following injection, this QMN rearranges within physiological pH to form nanoaggregates in structure, resulting in enhanced physicochemical properties and in vivo therapeutic performance without an initial burst release. The 200-nm-sized QMN exhibits less invasive injection, higher drug content, and better storage stability profile than conventional poly(lactide-co-glycolide) (PLGA) nanosuspensions containing QTP or QM. Following a single intramuscular injection to beagle dogs (35 mg kg-1 QTP), QMN undergoes pH-responsive nanoaggregation to form the lipophilic prodrug, providing esterase-oriented sustained release for five weeks compared with the two-week period of PLGA nanosuspensions. Notably, QMN exhibits improved in vivo pharmacokinetic performance with long-acting delivery while minimizing issues associated with polymeric PLGA formulations, including the initial massive burst release, cellular toxicity, and adverse side effects. These results support the further development of QMN as a novel long-acting injectable to improve patient compliance and dosing frequency.

Rheological properties of Triumfetta cordifolia gum solutions in the concentrated regime.

The polyelectrolyte gum from Triumfetta cordifolia stem bark has recently come to the fore for its remarkable potential as an emulsifier and stabilizer for aqueous formulations. This paper presents the rheological study of T. cordifolia gum aqueous solutions in the concentrated regime (C > C** = 0.14 % w/w). To this end, both flow and oscillation tests were performed on T. cordifolia gum solutions at two distinct concentrations belonging to the concentrated regime: at 0.2 % w/w (close to C**) and at 0.7 % w/w (far above C**). The effect of temperature, pH and added salts (NaCl, CaCl2 and AlCl3) on gum viscoelastic parameters were investigated, revealing associative interactions. Under specific conditions, several remarkable and complex phenomena were observed, such as over-structuring induced by temperature, anti-thixotropy, gelation, syneresis and salting-out induced by salt addition. The charged structure of T. cordifolia gum (weak polyelectrolyte), the high divalent metal content and the presence of associative groups in its network were demonstrated as the major factors responsible for these phenomena. These findings form the basis for the structure-property relationships of T. cordifolia gum and may open up to further investigations for this gum of great potential in many fields of applications.

The Skin Acid Mantle: An Update on Skin pH.

The acid mantle concept refers to the buffer system located in the upper stratum corneum of the skin. By sustaining an acidic environment, the acid mantle contributes to the regulation of the microbiome, structural stability, and inflammation. Skin pH is pivotal in maintaining the integrity of the epidermal barrier. Shifts in pH can disrupt barrier properties, and recent studies have emphasized its impact on dermatologic disease processes. This review explores the complex relationship of mechanisms through which skin pH impacts dermatologic pathologies. Furthermore, we highlight the promising potential of pH-targeted therapies for advancing the management of skin conditions.

Acidic proteomes are linked to microbial alkaline preference in African lakes.

Microbial amino acid composition (AA) reflects adaptive strategies of cellular and molecular regulations such as a high proportion of acidic AAs, including glutamic and aspartic acids in alkaliphiles. It remains understudied how microbial AA content is linked to their pH adaptation especially in natural environments. Here we examined prokaryotic communities and their AA composition of genes with metagenomics for 39 water and sediments of East African lakes along a gradient of pH spanning from 7.2 to 10.1. We found that Shannon diversity declined with the increasing pH and that species abundance were either positively or negatively associated with pH, indicating their distinct habitat preference in lakes. Microbial communities showed higher acidic proteomes in alkaline than neutral lakes. Species acidic proteomes were also positively correlated with their pH preference, which was consistent across major bacterial lineages. These results suggest selective pressure associated with high pH likely shape microbial amino acid composition both at the species and community levels. Comparative genome analyses further revealed that alkaliphilic microbes contained more functional genes with higher acidic AAs when compared to those in neutral conditions. These traits included genes encoding diverse classes of cation transmembrane transporters, antiporters, and compatible solute transporters, which are involved in cytoplasmic pH homeostasis and osmotic stress defense under high pH conditions. Our results provide the field evidence for the strong relationship between prokaryotic AA composition and their habitat preference and highlight amino acid optimization as strategies for environmental adaptation.

Reversible pH-switchable NIR-II nano-photosensitizer for precise imaging and photodynamic therapy of tumors.

Photodynamic therapy (PDT) has attracted widespread attention from researchers as an emerging cancer treatment method. There have been many reports on various types of NIR-II photosensitizers for imaging and treatment of tumor sites. However, there are few reports on the development of NIR-II organic small molecule photosensitizers that have intelligent response to the tumor microenvironment, precise imaging, real-time treatment, and high biocompatibility. In this work, we developed a series of NIR-II photosensitizers (RBTs) with near-infrared excitation, good photostability, and large Stokes shift. Among them, RBT-Br exhibited higher reactive oxygen species (ROS) generation efficiency due to the introduction of halogen heavy atoms to enhance intersystem crossing (ISC). It is noteworthy that RBT-Br can generate singlet oxygen (1O2) and superoxide anion radicals (•O2-) simultaneously under 730 nm laser. Subsequently, we used molecular engineering technology to construct three pH-responsive NIR-II photosensitizers (RBT-pHs) by utilizing the closure of the lactam ring, among which RBT-pH-1 (pKa = 6.78) is able to be directionally activated under the stimulation of tumor micro-acid environment, with its fluorescence emission window reaching 933 nm. Subsequently, RBT-pH-1 NPs encapsulated in DSPE-mPEG5k were applied for PDT treatment of mouse tumors. The results showed that RBT-pH-1 NPs were activated by the acidic tumor microenvironment and generated ROS under laser excitation, exhibiting precise tumor imaging and significant tumor growth inhibition. We look forward to these multifunctional NIR-II organic small molecule photosensitizers providing a more efficient approach for clinical treatment of tumors. STATEMENT OF SIGNIFICANCE: : A reversible pH-switchable NIR-II nano-photosensitizer RBT-pH-1 NPs (pKa = 6.76) is developed for precise imaging and PDT therapy of mouse tumors, which can be effectively used for targeted enrichment and activation of tumor micro-acid environments. The results show that this NIR-II photosensitizer generates ROS through tumor micro-acid environment stimulation and laser triggering, showing precise tumor imaging guidance and significant tumor growth inhibition.

Ecological aspects of myxomycetes associated with white and brown wood rot on coarse woody debris in subalpine coniferous forests in Central Japan.

We investigated factors affecting the community composition of lignicolous myxomycetes in dead wood with white and brown rot through summer and autumn surveys in a subalpine forest in Central Japan. In both seasons, wood had decayed to a softer state under brown rot than under white rot. The pH of wood with white rot was nearly neutral, while wood with brown rot was weakly acidic. Wood pH was lower in summer than in autumn. Forty-two myxomycetes taxa in 19 genera were identified in 302 fruiting-body colonies; white rot yielded 31 taxa and brown rot 24 taxa. Species diversity was higher on wood with white rot than on wood with brown rot. The effect of wood hardness on species composition depended on season. Several species exhibited a preference for one of the rot types. The substrate conditions associated with brown rot limit myxomycetes species diversity.

Dual-Purpose Aptamer-Based Sensors for Real-Time, Multiplexable Monitoring of Metabolites in Cell Culture Media.

The availability of high-frequency, real-time measurements of the concentrations of specific metabolites in cell culture systems will enable a deeper understanding of cellular metabolism and facilitate the application of good laboratory practice standards in cell culture protocols. However, currently available approaches to this end either are constrained to single-time-point and single-parameter measurements or are limited in the range of detectable analytes. Electrochemical aptamer-based (EAB) biosensors have demonstrated utility in real-time monitoring of analytes in vivo in blood and tissues. Here, we characterize a pH-sensing capability of EAB sensors that is independent of the specific target analyte of the aptamer sequence. We applied this dual-purpose EAB to the continuous measurement of pH and phenylalanine in several in vitro cell culture settings. The miniature EAB sensor that we developed exhibits rapid response times, good stability, high repeatability, and biologically relevant sensitivity. We also developed and characterized a leak-free reference electrode that mitigates the potential cytotoxic effects of silver ions released from conventional reference electrodes. Using the resulting dual-purpose sensor, we performed hourly measurements of pH and phenylalanine concentrations in the medium superfusing cultured epithelial tumor cell lines (A549, MDA-MB-23) and a human fibroblast cell line (MRC-5) for periods of up to 72 h. Our scalable technology may be multiplexed for high-throughput monitoring of pH and multiple analytes in support of the broad metabolic qualification of microphysiological systems.