ABSTRACT
Protein A affinity chromatography has been widely used for both laboratory scale purification and commercial manufacturing of monoclonal antibodies and Fc-fusion proteins. Protein A purification is specific and efficient. However, there still remain several issues to be addressed, such as incomplete clearance of impurities including host cell proteins, DNA, aggregates, etc. In addition, the effects of wash buffers in protein A purification on the physicochemical characteristics of antibodies have yet to be fully understood. Here we found a new purification protocol for monoclonal antibodies that can improve physicochemical properties of monoclonal antibodies simply by inserting an additional wash step with a basic buffer after the capture step to the conventional protein A purification. The effects of the alkaline wash on monoclonal antibodies were investigated in terms of physicochemical characteristics, yields, and impurity clearance. The simple insertion of an alkaline wash step resulted in protection of antibodies from irreversible aggregation, reduction in free thiols and impurities, an improvement in colloidal and storage stability, and enhanced yields. This new procedure is widely applicable to protein A affinity chromatography of monoclonal antibodies.
Subject(s)
Alkalies/chemistry , Antibodies, Monoclonal/chemistry , Staphylococcal Protein A/isolation & purification , Chromatography, Affinity , Chromatography, Gel , Electrophoresis, Polyacrylamide Gel/methods , SolutionsABSTRACT
A positively charged protein domain, denoted Zbasic, can be used as a general purification tag for purification of recombinantly produced target proteins by cation-exchange chromatography. The Zbasic domain is constructed from the Protein A-derived Z-domain, and engineered to be highly charged, which allows selective capture on a cation exchanger at physiological pH values. Moreover, Zbasic is selective also under denaturing conditions and can be used for purification of proteins solubilized from inclusion bodies. Zbasic can then be used as a flexible linker to the cation-exchanger resin, and thereby allows solid-phase refolding of the target protein.Herein, protocols for purification of soluble Zbasic-tagged fusion proteins , as well as for integrated purification and solid-phase refolding of insoluble fusion proteins , are described. In addition, a procedure for enzymatic tag removal and recovery of native target protein is outlined.
Subject(s)
Escherichia coli/chemistry , Inclusion Bodies/chemistry , Recombinant Fusion Proteins , Staphylococcal Protein A , Chromatography, Ion Exchange , Protein Domains , Recombinant Fusion Proteins/chemistry , Recombinant Fusion Proteins/isolation & purification , Staphylococcal Protein A/chemistry , Staphylococcal Protein A/isolation & purificationABSTRACT
In this chapter, we present an efficient method for stringent protein purification facilitated by a dual affinity tag referred to as ABDz1, which is based on a 5 kDa albumin-binding domain from Streptococcal Protein G. The small fusion tag enables an orthogonal affinity purification approach based on two successive and highly specific affinity purification steps. This approach is enabled by native binding of ABDz1 to human serum albumin and engineered binding to Staphylococcal Protein A, respectively. The ABDz1-tag can be fused to either terminus of a protein of interest and the purification steps can be carried out using standard laboratory equipment.
Subject(s)
Bacterial Proteins , Recombinant Fusion Proteins , Serum Albumin, Human , Staphylococcal Protein A , Bacterial Proteins/chemistry , Bacterial Proteins/genetics , Bacterial Proteins/isolation & purification , Recombinant Fusion Proteins/chemistry , Recombinant Fusion Proteins/genetics , Recombinant Fusion Proteins/isolation & purification , Serum Albumin, Human/chemistry , Serum Albumin, Human/genetics , Serum Albumin, Human/isolation & purification , Staphylococcal Protein A/chemistry , Staphylococcal Protein A/genetics , Staphylococcal Protein A/isolation & purificationABSTRACT
PURPOSE: Little is known about the molecular epidemiology of Staphylococcus aureus in Chinese neonatal intensive care units (NICUs). We describe the molecular epidemiology of S. aureus isolated from neonates on admission to Beijing Children's Hospital. METHODS: From May 2015-March 2016, nasal swabs were obtained on admission from 536 neonates. Cultures were also obtained from body sites with suspected infections. S. aureus isolates were characterized by staphylococcal chromosomal cassette (SCCmec) type, staphylococcal protein A (spa) type, multilocus sequence type (MLST), sasX gene, antimicrobial susceptibility and cytotoxicity. Logistic regression assessed risk factors for colonization. RESULTS: Overall, 92 (17%) infants were colonized with S. aureus and 20 (3.7%) were diagnosed with culture-positive S. aureus infection. Of the colonized infants, 70% (64/92) harbored methicillin-susceptible S. aureus (MSSA), 30% (28/92) harbored methicillin-resistant S. aureus (MRSA) while 70% (14/20) of infected infants were culture-positive for MRSA, 30% (6/20) were culture-positive for MSSA. Risk factors for colonization included female sex, age 7-28 days, higher birthweight (3270 IQR [2020-3655] grams) and vaginal delivery (p<0.05). The most common MRSA and MSSA clones were community-associated ST59-SCCmecIVa-t437 (60%) and ST188-t189 (15%), respectively. The sasX gene was not detected. Some MSSA isolates (16%) were penicillin-susceptible and some MRSA isolates (18%) were oxacillin-susceptible. MRSA and MSSA had similar cytotoxicity, but colonizing strains were less cytotoxic than strains associated with infections. CONCLUSIONS: S. aureus colonization was common in infants admitted to our NICU and two community-associated clones predominated. Several non-modifiable risk factors for S. aureus colonization were identified. These results suggest that screening infants for S. aureus upon admission and targeting decolonization of high-risk infants and/or those colonized with high-risk clones could be useful to prevent transmission.
Subject(s)
Anti-Infective Agents/pharmacology , Intensive Care Units, Neonatal/statistics & numerical data , Methicillin-Resistant Staphylococcus aureus/isolation & purification , Staphylococcal Infections/epidemiology , Age Factors , Anti-Infective Agents/therapeutic use , Birth Weight , China/epidemiology , Drug Resistance, Multiple, Bacterial , Female , Humans , Infant, Low Birth Weight , Infant, Newborn , Male , Mass Screening , Methicillin-Resistant Staphylococcus aureus/classification , Microbial Sensitivity Tests , Molecular Epidemiology , Multilocus Sequence Typing/statistics & numerical data , Risk Factors , Serotyping/statistics & numerical data , Sex Factors , Staphylococcal Infections/diagnosis , Staphylococcal Infections/microbiology , Staphylococcal Protein A/isolation & purificationABSTRACT
Antigen-binding fragments of antibodies are biotechnologically useful agents for decorating drug delivery systems, for blocking cell-surface receptors in cell culture, for recognizing analytes in biosensors, and potentially as therapeutics. They are typically produced by enzymatic digestion of full antibodies and isolated from the undesirable fragment crystallizable (Fc) by affinity chromatography using Protein-A columns. However, while Protein-A has a strong "classical" interaction with Fc fragments, it can also more weakly bind to an "alternative" site on the heavy chain variable region of antigen-binding fragments. As such, purifying small amounts of antibody fragments by Protein-A chromatography can result in low yield. Moreover, loading larger amounts of antibody fragments onto a Protein-A column can result in poor separation, because of competition of Fc and antigen-binding fragments for immobilized Protein-A. This study demonstrates that Protein-A-based homogeneous scavenging resolves this issue by precisely controlling the stoichiometry of Protein-A to Fc fragments, something that is not possible for conventional flow-type systems, such as affinity chromatography.
Subject(s)
Antigen-Antibody Complex/metabolism , Chromatography, Affinity/methods , Immunoglobulin Fab Fragments/metabolism , Immunoglobulin Fc Fragments/metabolism , Staphylococcal Protein A/metabolism , Animals , Antigen-Antibody Complex/isolation & purification , Humans , Immunoglobulin Fab Fragments/isolation & purification , Immunoglobulin Fc Fragments/isolation & purification , Protein Binding/physiology , Staphylococcal Protein A/isolation & purificationABSTRACT
Antibodies of the IgG2 subclass were captured from the clarified cell culture fluid either by protein A chromatography or by polyethylene glycol precipitation. The captured intermediates were stored as neutralized eluates (protein A chromatography) or in solid form as polyethylene glycol precipitates over a period of 13 months at three temperatures, -20°C, 5°C, and room temperature to compare the capture technologies in regard of the resulting product storability. Monomer content, high molecular mass impurities product loss and changes in the composition of the charge variants were determined at six time points during the storage. At the beginning and end of the study, samples were additionally tested by differential scanning calorimetry, differential scanning fluorimetry, and circular dichroism to determine structural alterations occurring during storage. Protein A purified material was highly stable at all tested temperatures in regard of monomer content and product losses. A transient, acidic isoform was formed during the chromatography step which re-converted to the main charged variant upon storage within a matter of days. Precipitated antibodies could be stored at -20 or 5°C for 3 months without product losses but afterwards recovery yields dropped to 65%. At room temperature, the precipitated antibody was not stable and degraded within 3 months.
Subject(s)
Immunoglobulin G/chemistry , Calorimetry, Differential Scanning , Circular Dichroism , Protein Conformation , Protein Stability , Staphylococcal Protein A/chemistry , Staphylococcal Protein A/isolation & purification , TemperatureABSTRACT
With continued development of integrated and continuous downstream purification processes, tuning and optimization become increasingly complicated with additional parameters and codependent variables over the sequence. This article offers a novel perspective of nonlinear optimization of integrated sequences with regard to individual column sizes, flow rates, and scheduling. The problem setup itself is a versatile tool to be used in downstream design which is demonstrated in two case studies: a four-column integrated sequence and a continuously loaded twin-capture setup with five columns.
Subject(s)
Biological Products/isolation & purification , Chromatography/methods , Staphylococcal Protein A/isolation & purification , Antibodies, Monoclonal/chemistry , Biological Products/chemistry , Countercurrent Distribution , Staphylococcal Protein A/chemistryABSTRACT
The Staphylococcus aureus protein A (SpA) can be obtained through the culture of wild-type S. aureus and also as a recombinant protein in safe bacterial hosts. Several methods have been used to purify SpA among which ion-exchange chromatography, affinity chromatography, gel filtration, and per aqueous liquid chromatography (PALC) are common. SpA has a wide range of biochemical, biotechnological, and medical applications and is most commonly used in test methods such as immunoprecipitation, enzyme-linked immunosorbent assay, and Western blotting. SpA has also been widely utilized in pharmaceutical applications to bind to immune complexes and serum immunoglobulins. SpA also directly binds to the B-cells preventing initiation of infectious diseases as well as having a role in the development of various autoimmune diseases. This review considers different applications of SpA in biotechnology and its novel clinical application for effective treatment of autoimmune diseases. It also discusses various strategies for expression and purification of the SpA including types of column chromatography that are commonly used in protein purification and developing SpA surface display technologies. Finally, this review highlights the potential and novel applications of SpA immobilization, SpA typing, protein engineering for further development of immunological and biochemical research, and also application of SpA as a diagnostic biosensor.
Subject(s)
Autoimmune Diseases/immunology , Biosensing Techniques , Staphylococcal Protein A/biosynthesis , Staphylococcal Protein A/immunology , Staphylococcus aureus/chemistry , Animals , Autoimmune Diseases/therapy , Biotechnology , Humans , Protein Engineering , Staphylococcal Protein A/isolation & purification , Staphylococcus aureus/metabolismABSTRACT
Chemiresistive platforms are best suited for developing DNA hybridization detection systems, owing to their ease of fabrication, simple detection methodology and amenability towards electronics. In this work, we report development of a generic, robust, electrospun nanofiber based interdigitated chemiresistive platform for DNA hybridization detection. The platform comprises of interdigitated metal electrodes decorated with electrospun nanofibers on the top. Two approaches viz., drop casting of graphene doped Mn2O3 nanofibers (GMnO) and direct electrospinning of polyaniline/polyethylene oxide (PANi/PEO) composite nanofibers, have been utilized to decorate these electrodes. In both approaches, inter-device variability, a key challenge for converting this proof-of-concept into a tangible prototype/product, has been addressed using a shadow masking technique. Consequently, the relative standard deviation for multiple PANi/PEO nanofiber based chemiresistors has been brought down from 17.82% (without shadow masking) to 4.41% (with shadow masking). The nanofibers are further modified with single-stranded probe DNAs, to capture a desired hybridization event. To establish the generic nature of the platform, detection of multiple target DNAs has been successfully demonstrated. These targets include dengue virus specific consensus primer (DENVCP) and four DNAs corresponding to Staphylococcus aureus specific genes, namely nuc, mecA, vanA and protein A. The chemiresistive detection of DENVCP has been performed in the concentration range of 10â¯fM - 1⯵M, whereas the detection of the other targets has been carried out in the range of 1â¯pM - 1⯵M. Using a 3σ method, we have estimated the limit of detection for the chemiresistive detection of DENVCP to be 1.9â¯fM.
Subject(s)
Biosensing Techniques , DNA, Single-Stranded/chemistry , DNA/isolation & purification , Staphylococcus aureus/isolation & purification , Bacterial Proteins/genetics , Bacterial Proteins/isolation & purification , Carbon-Oxygen Ligases/genetics , Carbon-Oxygen Ligases/isolation & purification , DNA/chemistry , DNA, Single-Stranded/genetics , Graphite/chemistry , Humans , Micrococcal Nuclease/genetics , Micrococcal Nuclease/isolation & purification , Nanofibers/chemistry , Nucleic Acid Hybridization , Penicillin-Binding Proteins/isolation & purification , Staphylococcal Protein A/genetics , Staphylococcal Protein A/isolation & purification , Staphylococcus aureus/geneticsABSTRACT
Filtration of protein A eluates inline with a chromatography column is a common challenge for monoclonal antibody (mAb) purification due to the high system backpressure during elution, which can result in system shut down or require a decreased elution flow rate. The inability to filter inline not only poses a risk for process deviations, but can also lead to tank constraints and microbial ingress risk. Here, we evaluated and described a novel approach for identifying filters for inline filtration of protein A eluates at pilot scale. We fractionated the protein A eluates into 0.25 column volume fractions to screen filters under constant pressure or constant flow conditions. We observed that filtration properties for eluate fractions are significantly different from the offline eluate, and the conventional filter sizing study using elution pool is not able to predict inline filtration behavior. Through the submicron particle counts and size distribution in pre- and post-filtration samples, we determined that both attributes contribute to the high pressure across the filters. A successful proof-of-concept experiment on a column 10 cm in diameter inline with the filter train selected validated this fractionation method, and the approach was applied to a different mAb molecule to confirm effectiveness.
Subject(s)
Staphylococcal Protein A/chemistry , Staphylococcal Protein A/isolation & purification , Animals , Antibodies, Monoclonal, Murine-Derived/chemistry , Antibodies, Monoclonal, Murine-Derived/isolation & purification , Mice , Ultrafiltration/methodsABSTRACT
Chaperone proteins are required to maintain the overall fold and function of proteins in the cell. As part of the Hsp70 family, Ssa1 acts to maintain cellular proteostasis through a variety of diverse pathways aimed to preserve the native conformation of target proteins, thereby preventing aggregation and future states of cellular toxicity. Studying the structural dynamics of Ssa1 in vitro is essential to determining their precise mechanisms and requires the development of purification methods that result in highly pure chaperones. Current methods of expressing and purifying Ssa1 utilize affinity tagged constructs expressed in Escherichia coli, however, expression in an exogenous source produces proteins that lack post-translational modifications leading to undesired structural and functional effects. Current protocols to purify Ssa1 from Saccharomyces cerevisiae require large amounts of starting material, multiple steps of chromatography, and result in low yield. Our objective was to establish a small-scale purification of Ssa1 expressed from its endogenous source, Saccharomyces cerevisiae, with significant yield and purity. We utilized a protein A affinity tag that was previously used to purify large protein complexes from yeast, combined with magnetic Dynabeads that are conjugated with rabbit immunoglobulin G (IgG). Our results show that we can produce native, highly pure, active Ssa1 via this one-step purification with minimal amounts of starting material, and this Ssa1-protein A fusion does not alter cellular phenotypes. This methodology is a significant improvement in Ssa1 purification and will facilitate future experiments that will elucidate the biochemical and biophysical properties of Hsp70 chaperones.
Subject(s)
Adenosine Triphosphatases/isolation & purification , Biotechnology/methods , HSP70 Heat-Shock Proteins/isolation & purification , Recombinant Fusion Proteins/isolation & purification , Saccharomyces cerevisiae Proteins/isolation & purification , Saccharomyces cerevisiae/genetics , Staphylococcal Protein A/isolation & purification , Adenosine Triphosphatases/biosynthesis , Adenosine Triphosphatases/genetics , Animals , Chromatography, Affinity/methods , Cloning, Molecular , Gene Expression , Genetic Vectors/chemistry , Genetic Vectors/metabolism , HSP70 Heat-Shock Proteins/biosynthesis , HSP70 Heat-Shock Proteins/genetics , Immunoglobulin G/chemistry , Immunomagnetic Separation/methods , Rabbits , Recombinant Fusion Proteins/biosynthesis , Recombinant Fusion Proteins/genetics , Saccharomyces cerevisiae/chemistry , Saccharomyces cerevisiae/enzymology , Saccharomyces cerevisiae Proteins/biosynthesis , Saccharomyces cerevisiae Proteins/genetics , Staphylococcal Protein A/genetics , Staphylococcal Protein A/metabolismSubject(s)
Purpura, Thrombocytopenic, Idiopathic , Staphylococcal Protein A/pharmacology , Animals , Disease Models, Animal , Female , Mice , Purpura, Thrombocytopenic, Idiopathic/drug therapy , Purpura, Thrombocytopenic, Idiopathic/immunology , Purpura, Thrombocytopenic, Idiopathic/pathology , Staphylococcal Protein A/chemistry , Staphylococcal Protein A/isolation & purificationABSTRACT
Staphylococcus aureus (S. aureus) is the most common organism causing osteomyelitis, and Staphylococcus aureus protein A (SpA) is an important virulence factor anchored in its cell wall. However, the precise mechanisms underlying the bone loss caused by SpA have not been well understood. The present study aimed to investigate the effect of SpA on osteoclast differentiation, and the probable mechanism was investigated. Raw264.7 cells were treated with SpA in the absence or presence of receptoractivated (NF)κB ligand for 5 days, and morphological and biochemical assays were used to assess osteoclastogenesis and explore the underlying mechanisms. Data demonstrated that SpA induced osteoclast differentiation and promoted bone resorption in a dosedependent manner in the absence or presence of RANKL. In addition, the expression of osteoclastspecific genes, such as the tartrate resistant acid phosphatase, matrix metalloproteinase9, cathepsin K, calcitonin receptors and d2 isoform of the vacuolar ATPase Vo domain, were enhanced by SpA. Furthermore, the SpAinduced osteoclast differentiation was associated with the degradation of inhibitor of κBα, phosphorylation of NFκB p65 and increased expression of nuclear factor of activated Tcells. However, by treatment with JSH23, an NFκB inhibitor, the formation of osteoclastlike cells and resorption pits was significantly reduced, and the expression of osteoclastspecific genes was also inhibited. Collectively, in the present study SpA induced osteoclast differentiation, promoted bone resorption, and the NFκB signaling pathway was involved in this process.
Subject(s)
NF-kappa B/metabolism , Osteoclasts/drug effects , Osteogenesis/drug effects , Signal Transduction/drug effects , Staphylococcal Protein A/pharmacology , Animals , Cathepsin K/genetics , Cathepsin K/metabolism , Cell Differentiation , Gene Expression Regulation , Matrix Metalloproteinase 9/genetics , Matrix Metalloproteinase 9/metabolism , Mice , NF-kappa B/genetics , NFATC Transcription Factors/genetics , NFATC Transcription Factors/metabolism , Osteoclasts/metabolism , Osteoclasts/pathology , Osteogenesis/genetics , Phenylenediamines/pharmacology , RANK Ligand/pharmacology , RAW 264.7 Cells , Receptors, Calcitonin/genetics , Receptors, Calcitonin/metabolism , Staphylococcal Protein A/isolation & purification , Staphylococcus aureus/chemistry , Tartrate-Resistant Acid Phosphatase/genetics , Tartrate-Resistant Acid Phosphatase/metabolismABSTRACT
Monoclonal antibodies are mainly produced by mammalian cell culture, which due to its complexity, results in a wide range of product variants/isoforms. With the growing implementation of Quality by Design (QbD) and Process Analytical Technology (PAT) in drug manufacturing, monitoring and controlling quality attributes within a predefined range during manufacturing may provide added consistency to product quality. To implement these concepts, more robust analytical tools could reduce the time needed for monitoring quality attributes during upstream processing. The formation of protein aggregates is one such quality attribute that can lead to safety and efficacy issues in the final drug product. Described in this study is a fully automated two-dimensional high performance liquid chromatography (2D-HPLC) method for characterizing protein aggregation of crude in-process bioreactor samples. It combines protein A purification and separation by size exclusion into a single analytical module that has the potential to be employed at-line within a bioprocessing system. This method utilizes a novel in-line fraction collection device allowing for the collection of up to twelve fractions from a single sample or peak which facilitates the subsequent linked analysis of multiple protein peaks of interest in one chromatography module.
Subject(s)
Antibodies, Monoclonal , Chromatography, High Pressure Liquid/instrumentation , Chromatography, High Pressure Liquid/methods , Antibodies, Monoclonal/analysis , Antibodies, Monoclonal/chemistry , Antibodies, Monoclonal/isolation & purification , Chromatography, Gel/instrumentation , Chromatography, Gel/methods , Equipment Design , Protein Aggregates , Staphylococcal Protein A/analysis , Staphylococcal Protein A/chemistry , Staphylococcal Protein A/isolation & purificationABSTRACT
Turbid elution pools and high column back pressure are common during elution of monoclonal antibodies (mAbs) by acidic pH in Protein A chromatography. This phenomenon has been historically attributed to acid-induced precipitation of incorrectly folded or pH-sensitive mAbs and host cell proteins (HCPs). In this work, we propose a new mechanism that may account for some observations of elution turbidity in Protein A chromatography. We report several examples of turbidity and high column back pressure occurring transiently under a short course of neutral conditions during Protein A elution. A systematic study of three mAbs displaying this behavior revealed phase separation characterized by liquid drops under certain conditions including neutral pH, low ionic strength, and high protein concentration. These liquid droplets caused solution turbidity and exhibited extremely high viscosity, resulting in high column back pressure. We found out that the droplets were formed through liquid-liquid phase separation (LLPS) as a result of protein self-association. We also found multiple factors, including pH, temperature, ionic strength, and protein concentration can affect LLPS behaviors. Careful selection of process parameters during protein A elution, including temperature, flow rate, buffer, and salt can inhibit formation of a dense liquid phase, reducing both turbidity (by 90%) and column back pressure (below 20 pounds per square inch). These findings provide both mechanistic insight and practical mitigation strategies for Protein A chromatography induced LLPS.
Subject(s)
Chromatography, Liquid/methods , Liquid-Liquid Extraction/methods , Pressure , Staphylococcal Protein A/isolation & purification , Antibodies, Monoclonal/chemistry , Arginine/chemistry , Buffers , Hydrogen-Ion Concentration , Nephelometry and Turbidimetry , Sodium Chloride/chemistry , Solutions , TemperatureABSTRACT
Protein A, which is secreted by and displayed on the cell membrane of Staphylococcus aureus is an important biomarker for S. aureus. Thus, its rapid and specific detection may facilitate the pathogen identification and initiation of proper treatment. Herein, we present a simple, label-free and rapid optical biosensor enabling specific detection of protein A. Protein A-binding aptamer serves as the capture probe and is immobilized onto a nanostructured porous silicon thin film, which serves as the optical transducer element. We demonstrate high sensitivity of the biosensor with a linear detection range between 8 and 23µM. The apparent dissociation constant was determined as 13.98µM and the LoD is 3.17µM. Harnessing the affinity between protein A and antibodies, a sandwich assay format was developed to amplify the optical signal associated with protein A capture by the aptamer. Using this approach, we increase the sensitivity of the biosensor, resulting in a three times lower LoD.
Subject(s)
Aptamers, Nucleotide/chemistry , Biosensing Techniques/methods , Nanostructures/chemistry , Silicon/chemistry , Staphylococcal Protein A/isolation & purification , Antibodies , Immobilization/methods , Immunoglobulin G , Optical Phenomena , Porosity , Sensitivity and Specificity , Staphylococcal Infections/diagnosis , Staphylococcus aureus/metabolismABSTRACT
This paper discusses the use of recyclable functionalized nanoparticles for an improved downstream processing of recombinant products. The Gram-positive bacterium Bacillus megaterium was used to secrete recombinant protein A fused to a histidine tag into the culture supernatant in shaker flasks. Superparamagnetic iron oxide nanoparticles functionalized with 3-glycidoxypropyl-trimethoxysilane-coupled-nitrilotriacetic-acid groups (GNTA-SPION) were synthesized and added directly to the growing culture. After 10min incubation time, >85% of the product was adsorbed onto the particles. The particles were magnetically separated using handheld neodymium magnets and the product was eluted. The GNTA-SPION were successfully regenerated and reused in five consecutive cycles. In the one-step purification, the purity of the product reached >99.9% regarding protein A. A very low particle concentration of 0.5g/L was sufficient for effective product separation. Bacterial growth was not influenced negatively by this concentration. Particle analysis showed similar properties between freshly synthesized and regenerated GNTA-SPION. The overall process efficiency was however influenced by partial disintegration of particle agglomerates and thus loss of particles. The demonstration of very fast in situ product removal from growing bacterial culture combined with a very high product purity within one step shows possibilities for automated large scale purification combined with recycling of biomass.
Subject(s)
Bacillus megaterium/chemistry , Magnetics/methods , Magnetite Nanoparticles/chemistry , Staphylococcal Protein A/isolation & purification , Absorption, Physicochemical , Bacillus megaterium/metabolism , Coated Materials, Biocompatible/chemistry , Enzyme-Linked Immunosorbent Assay , Histidine , Microscopy, Electron, Scanning , Particle Size , Recombinant Proteins/chemistry , Staphylococcal Protein A/chemistry , ThermogravimetryABSTRACT
The levels of many product related variants observed during the production of monoclonal antibodies are dependent on control of the manufacturing process, especially the cell culture process. However, it is difficult to characterize samples pulled from the bioreactor due to the low levels of product during the early stages of the process and the high levels of interfering reagents. Furthermore, analytical results are often not available for several days, which slows the process development cycle and prevents "real time" adjustments to the manufacturing process. To reduce the delay and enhance our ability to achieve quality targets, we have developed a low-volume, high-throughput, and high-content analytical platform for at-line product quality analysis. This workflow includes an automated, 96-well plate protein A purification step to isolate antibody product from the cell culture fermentation broth, followed by rapid, multiattribute LC-MS analysis. We have demonstrated quantitative correlations between particular process parameters with the levels of glycosylated and glycated species in a series of small scale experiments, but the platform could be used to monitor other attributes and applied across the biopharmaceutical industry.
Subject(s)
Automation , Cell Culture Techniques , High-Throughput Screening Assays , Staphylococcal Protein A/isolation & purification , Animals , CHO Cells , Cell Culture Techniques/instrumentation , Chromatography, High Pressure Liquid/instrumentation , Cricetulus , High-Throughput Screening Assays/instrumentation , Mass Spectrometry/instrumentation , Staphylococcal Protein A/chemistryABSTRACT
Host cell protein (HCP) impurities are generated by the host organism during the production of therapeutic recombinant proteins, and are difficult to remove completely. Though commonly present in small quantities, if levels are not controlled, HCPs can potentially reduce drug efficacy and cause adverse patient reactions. A high resolution approach for thorough HCP characterization of therapeutic monoclonal antibodies is presented herein. In this method, antibody samples are first depleted via affinity enrichment (e.g., Protein A, Protein L) using milligram quantities of material. The HCP-containing flow-through is then enzymatically digested, analyzed using nano-UPLC-MS/MS, and proteins are identified through database searching. Nearly 700 HCPs were identified from samples with very low total HCP levels (< 1 ppm to â¼ 10 ppm) using this method. Quantitation of individual HCPs was performed using normalized spectral counting as the number of peptide spectrum matches (PSMs) per protein is proportional to protein abundance. Multivariate analysis tools were utilized to assess similarities between HCP profiles by: 1) quantifying overlaps between HCP identities; and 2) comparing correlations between individual protein abundances as calculated by spectral counts. Clustering analysis using these measures of dissimilarity between HCP profiles enabled high resolution differentiation of commercial grade monoclonal antibody samples generated from different cell lines, cell culture, and purification processes.
Subject(s)
Antibodies, Monoclonal/metabolism , Chromatography, Liquid/methods , Proteome/metabolism , Recombinant Proteins/metabolism , Tandem Mass Spectrometry/methods , Animals , Antibodies, Monoclonal/genetics , Antibodies, Monoclonal/therapeutic use , CHO Cells , Cluster Analysis , Cricetinae , Cricetulus , Humans , Multivariate Analysis , Proteome/classification , Proteome/isolation & purification , Proteomics , Recombinant Proteins/therapeutic use , Reproducibility of Results , Staphylococcal Protein A/isolation & purification , Staphylococcal Protein A/metabolism , Trypsin/metabolismABSTRACT
In the next 10 years, the pharmaceutical industry anticipates that revenue from biotherapeutics will overtake those generated from small drug molecules. Despite effectively treating a range of chronic and life-threatening diseases, the high cost of biotherapeutics limits their use. For biotherapeutic monoclonal antibodies (mAbs), an important production cost is the affinity resin used for protein capture. Cleaning-in-place (CIP) protocols aim to optimise the lifespan of the resin by slowing binding capacity decay. Binding assays can determine resin capacity from the mobile phase, but do not reveal the underlying causes of Protein A ligand degradation. The focus needs to be on the stationary phase to examine the effect of CIP on the resin. To directly determine both the local Protein A ligand concentration and conformation on two Protein A resins, we developed a method based on attenuated total reflection (ATR) Fourier transform infrared (FTIR) spectroscopy. ATR-FTIR spectroscopic imaging revealed that applying a carefully controlled load to agarose beads produces an even and reproducible contact with the internal reflection element. This allowed detection and quantification of the binding capacity of the stationary phase. ATR-FTIR spectroscopy also showed that Protein A proteolysis does not seem to occur under typical CIP conditions (below 1 M NaOH). However, our data revealed that concentrations of NaOH above 0.1 M cause significant changes in Protein A conformation. The addition of >0.4 M trehalose during CIP significantly reduced NaOH-induced ligand unfolding observed for one of the two Protein A resins tested. Such insights could help to optimise CIP protocols in order to extend resin lifetime and reduce mAb production costs.