Discovery and SAR of 4-aminopyrrolidine-2-carboxylic acid correctors of CFTR for the treatment of cystic fibrosis.

Cystic fibrosis (CF) is an autosomal recessive disease resulting from mutations on both copies of the CFTR gene. Phenylalanine deletion at position 508 of the CFTR protein (F508del-CFTR) is the most frequent mutation in CF patients. Currently, the most effective treatments of CF use a dual or triple combination of CFTR correctors and potentiators. In triple therapy, two correctors (C1 and C2) and a potentiator are employed. Herein, we describe the identification and exploration of the SAR of a series of 4-aminopyrrolidine-2-carboxylic acid C2 correctors of CFTR to be used in conjunction with our existing C1 corrector series for the treatment of CF.

Expanding the Medicinal Chemist Toolbox: Comparing Seven C(sp2)-C(sp3) Cross-Coupling Methods by Library Synthesis.

Despite recent advances in the field of C(sp2)-C(sp3) cross-couplings and the accompanying increase in publications, it can be hard to determine which method is appropriate for a given reaction when using the highly functionalized intermediates prevalent in medicinal chemistry. Thus a study was done comparing the ability of seven methods to directly install a diverse set of alkyl groups on "drug-like" aryl structures via parallel library synthesis. Each method showed substrates that it excelled at coupling compared with the other methods. When analyzing the reactions run across all of the methods, a reaction success rate of 50% was achieved. Whereas this is promising, there are still gaps in the scope of direct C(sp2)-C(sp3) coupling methods, like tertiary group installation. The results reported herein should be used to inform future syntheses, assess reaction scope, and encourage medicinal chemists to expand their synthetic toolbox.

Discovery of ABBV/GLPG-3221, a Potent Corrector of CFTR for the Treatment of Cystic Fibrosis.

Cystic fibrosis (CF) is a genetic disorder that affects multiple tissues and organs. CF is caused by mutations in the CFTR gene, resulting in insufficient or impaired cystic fibrosis transmembrane conductance regulator (CFTR) protein. The deletion of phenylalanine at position 508 of the protein (F508del-CFTR) is the most common mutation observed in CF patients. The most effective treatments of these patients employ two CFTR modulator classes, correctors and potentiators. CFTR correctors increase protein levels at the cell surface; CFTR potentiators enable the functional opening of CFTR channels at the cell surface. Triple-combination therapies utilize two distinct corrector molecules (C1 and C2) to further improve the overall efficacy. We identified the need to develop a C2 corrector series that had the potential to be used in conjunction with our existing C1 corrector series and provide robust clinical efficacy for CF patients. The identification of a pyrrolidine series of CFTR C2 correctors and the structure-activity relationship of this series is described. This work resulted in the discovery and selection of (2S,3R,4S,5S)-3-(tert-butyl)-4-((2-methoxy-5-(trifluoromethyl)pyridin-3-yl)methoxy)-1-((S)-tetrahydro-2H-pyran-2-carbonyl)-5-(o-tolyl)pyrrolidine-2-carboxylic acid (ABBV/GLPG-3221), which was advanced to clinical trials.

Evaluation of Chemically-Cleavable Linkers for Quantitative Mapping of Small Molecule-Cysteinome Reactivity.

Numerous reagents have been developed to enable chemical proteomic analysis of small molecule-protein interactomes. However, the performance of these reagents has not been systematically evaluated and compared. Herein, we report our efforts to conduct a parallel assessment of two widely used chemically cleavable linkers equipped with dialkoxydiphenylsilane (DADPS linker) and azobenzene (AZO linker) moieties. Profiling a cellular cysteinome using the iodoacetamide alkyne probe demonstrated a significant discrepancy between the experimental results obtained through the application of each of the reagents. To better understand the source of observed discrepancy, we evaluated the key sample preparation steps. We also performed a mass tolerant database search strategy using MSFragger software. This resulted in identifying a previously unreported artifactual modification on the residual mass of the azobenzene linker. Furthermore, we conducted a comparative analysis of enrichment modes using both cleavable linkers. This effort determined that enrichment of proteolytic digests yielded a far greater number of identified cysteine residues than the enrichment conducted prior to protein digest. Inspired by recent studies where multiplexed quantitative labeling strategies were applied to cleavable biotin linkers, we combined this further optimized protocol using the DADPS cleavable linker with tandem mass tag (TMT) labeling to profile the FDA-approved covalent EGFR kinase inhibitor dacomitinib against the cysteinome of an epidermoid cancer cell line. Our analysis resulted in the detection and quantification of over 10,000 unique cysteine residues, a nearly 3-fold increase over previous studies that used cleavable biotin linkers for enrichment. Critically, cysteine residues corresponding to proteins directly as well as indirectly modulated by dacomitinib treatment were identified. Overall, our study suggests that the dialkoxydiphenylsilane linker could be broadly applied wherever chemically cleavable linkers are required for chemical proteomic characterization of cellular proteomes.

Emerging Trends in Flow Chemistry and Applications to the Pharmaceutical Industry.

The field of flow chemistry has garnered considerable attention over the past 2 decades. This Perspective highlights many recent advances in the field of flow chemistry and discusses applications to the pharmaceutical industry, from discovery to manufacturing. From a synthetic perspective, a number of new enabling technologies are providing more rationale to run reactions in flow over batch techniques. Additionally, highly automated flow synthesis platforms have been developed with broad applicability across the pharmaceutical industry, ranging from advancing medicinal chemistry programs to self-optimizing synthetic routes. A combination of simplified and automated systems is discussed, demonstrating how flow chemistry solutions can be tailored to fit the specific needs of a project.

Discovery and optimization of novel constrained pyrrolopyridone BET family inhibitors.

Novel conformationally constrained BET bromodomain inhibitors have been developed. These inhibitors were optimized in two similar, yet distinct chemical series, the 6-methyl-1H-pyrrolo[2,3-c]pyridin-7(6H)-ones (A) and the 1-methyl-1H-pyrrolo[2,3-c]pyridin-7(6H)-ones (B). Each series demonstrated excellent activity in binding and cellular assays, and lead compounds from each series demonstrated significant efficacy in in vivo tumor xenograft models.

Discovery of 4-[(2R,4R)-4-({[1-(2,2-Difluoro-1,3-benzodioxol-5-yl)cyclopropyl]carbonyl}amino)-7-(difluoromethoxy)-3,4-dihydro-2H-chromen-2-yl]benzoic Acid (ABBV/GLPG-2222), a Potent Cystic Fibrosis Transmembrane Conductance Regulator (CFTR) Corrector for the Treatment of Cystic Fibrosis.

Cystic fibrosis (CF) is a multiorgan disease of the lungs, sinuses, pancreas, and gastrointestinal tract that is caused by a dysfunction or deficiency of the cystic fibrosis transmembrane conductance regulator (CFTR) protein, an epithelial anion channel that regulates salt and water balance in the tissues in which it is expressed. To effectively treat the most prevalent patient population (F508del mutation), two biomolecular modulators are required: correctors to increase CFTR levels at the cell surface, and potentiators to allow the effective opening of the CFTR channel. Despite approved potentiator and potentiator/corrector combination therapies, there remains a high need to develop more potent and efficacious correctors. Herein, we disclose the discovery of a highly potent series of CFTR correctors and the structure-activity relationship (SAR) studies that guided the discovery of ABBV/GLPG-2222 (22), which is currently in clinical trials in patients harboring the F508del CFTR mutation on at least one allele.

Pd-PEPPSI-IPent-SiO2 : A Supported Catalyst for Challenging Negishi Coupling Reactions in Flow.

A silica-supported precatalyst, Pd-PEPPSI-IPent-SiO2 , has been prepared and evaluated for its proficiency in the Negishi cross-coupling of hindered and electronically deactivated coupling partners. The precatalyst Pd-PEPPSI-IPent loaded onto packed bed columns shows high catalytic activity for the room-temperature coupling of deactivated/hindered biaryl partners. Also for the first time, the flowed Csp3 -Csp2 coupling of secondary alkylzinc reagents to (hetero)aromatics has been achieved with high selectivity with Pd-PEPPSI-IPent-SiO2 . These couplings required residence times as short as 3 minutes to effect completion of these challenging transformations with excellent selectivity for the nonrearranged product.

Synthesis of Fused Pyrimidinone and Quinolone Derivatives in an Automated High-Temperature and High-Pressure Flow Reactor.

Fused pyrimidinone and quinolone derivatives that are of potential interest to pharmaceutical research were synthesized within minutes in up to 96% yield in an automated Phoenix high-temperature and high-pressure continuous flow reactor. Heterocyclic scaffolds that are either hard to synthesize or require multisteps are readily accessible using a common set of reaction conditions. The use of low-boiling solvents along with the high conversions of these reactions allowed for facile workup and isolation. The methods reported herein are highly amenable for fast and efficient heterocycle synthesis as well as compound scale-ups.

Automated library synthesis of cyclopropyl boronic esters employing diazomethane in a tube-in-tube flow reactor.

The efficient synthesis of cyclopropyl boronic esters in library format using a diazomethane flow reactor has been achieved. A pivotal component of the system is a fully automated tube-in-tube reactor allowing for safe handling of hazardous diazomethane on repeated small scale and for the generation of larger quantities of product. The setup enables the repeated execution of Pd-catalyzed cyclopropanation reactions without compromising its operation over time.

High-Temperature Boc Deprotection in Flow and Its Application in Multistep Reaction Sequences.

A simplified Boc deprotection using a high-temperature flow reactor is described. The system afforded the qualitative yield of a wide variety of deprotected substrates within minutes using acetonitrile as the solvent and without the use of acidic conditions or additional workups. Highly efficient, multistep reaction sequences in flow are also demonstrated wherein no extraction or isolation was required between steps.

Strained cyclophane macrocycles: impact of progressive ring size reduction on synthesis and structure.

The synthesis, X-ray crystal structures, and calculated strain energies are reported for a homologous series of 11- to 14-membered drug-like cyclophane macrocycles, representing an unusual region of chemical space that can be difficult to access synthetically. The ratio of macrocycle to dimer, generated via a copper catalyzed azide-alkyne cycloaddition macrocyclization in flow at elevated temperature, could be rationalized in terms of the strain energy in the macrocyclic product. The progressive increase in strain resulting from reduction in macrocycle ring size, or the introduction of additional conformational constraints, results in marked deviations from typical geometries. These strained cyclophane macrocyclic systems provide access to spatial orientations of functionality that would not be readily available in unstrained or acyclic analogs. The most strained system prepared represents the first report of an 11-membered cyclophane containing a 1,4-disubstituted 1,2,3-triazole ring and establishes a limit to the ring strain that can be generated using this macrocycle synthesis methodology.

Comparison of diffusion coefficients for matched pairs of macrocyclic and linear molecules over a drug-like molecular weight range.

The diffusion coefficients of a series of closely matched pairs of macrocyclic and linear molecules have been compared using NMR spectroscopy. The macrocyclic series was designed both to overlap with and extend beyond the molecular weight range typically employed for drug-like molecules. The linear molecules each represent a carbogenic fission of their macrocyclic counterparts, designed to minimize differences in functionality and physicochemical properties. Each series of molecules was prepared using copper catalyzed azide-alkyne cycloaddition (CuAAC) reactions conducted in a flow using a copper tube. The macrocyclic series exhibited consistently higher diffusion across the entire molecular weight range studied. The fold difference in diffusion coefficients between the macrocyclic and linear analogues appeared to be independent of either solvent viscosity or dielectric environment.

Synthesis of 5-iodo-1,2,3-triazole-containing macrocycles using copper flow reactor technology.

A new macrocyclization strategy to synthesize 12- to 31-membered 5-iodo-1,2,3-triazole-containing macrocycles is described. The macrocycles have been generated using a simple and efficient copper-catalyzed cycloaddition in flow under environmentally friendly conditions. This methodology also permits the facile, regioselective synthesis of 1,4,5-trisubstituted-1,2,3-triazole-containing macrocyles using palladium-catalyzed cross-coupling reactions.

Efficient access to new chemical space through flow--construction of druglike macrocycles through copper-surface-catalyzed azide-alkyne cycloaddition reactions.

A series of 12- to 22-membered macrocycles, with druglike functionality and properties, have been generated by using a simple and efficient copper-catalyzed azide-acetylene cycloaddition reaction, conducted in flow in high-temperature copper tubing, under environmentally friendly conditions. The triazole-containing macrocycles have been generated in up to 90 % yield in a 5 min reaction, without resorting to the high-dilution conditions typical of macrocyclization reactions. This approach represents a very efficient method for constructing this important class of molecules, in terms of yield, concentration, and environmental considerations.

A biphasic oxidation of alcohols to aldehydes and ketones using a simplified packed-bed microreactor.

We demonstrate the preparation and characterization of a simplified packed-bed microreactor using an immobilized TEMPO catalyst shown to oxidize primary and secondary alcohols via the biphasic Anelli-Montanari protocol. Oxidations occurred in high yields with great stability over time. We observed that plugs of aqueous oxidant and organic alcohol entered the reactor as plugs but merged into an emulsion on the packed-bed. The emulsion coalesced into larger plugs upon exiting the reactor, leaving the organic product separate from the aqueous by-products. Furthermore, the microreactor oxidized a wide range of alcohols and remained active in excess of 100 trials without showing any loss of catalytic activity.

Use of bifunctional ureas to increase the rate of proline-catalyzed alpha-aminoxylations.

The rate of the proline-catalyzed alpha-aminoxylation of aldehydes is significantly increased in the presence of a bifunctional urea. Structure-activity relationship data indicate that both an amine and a urea are crucial for rate enhancement. The evidence presented herein suggests that this rate enhancement originates from the hydrogen bonding interaction between the bifunctional urea and an oxazolidinone intermediate to increase the rate of enamine formation. Proline derivatives that are incapable of forming oxazolidinones exhibit no rate enhancement in the presence of the bifunctional urea. The rate enhancement is general for a variety of aldehydes, and the faster reactions do not reduce yields or selectivities.

A general approach to creating soluble catalytic polymers heterogenized in microcapsules.

A general method for preparing site-isolated polymeric catalysts is presented. Linear chloromethyl and azide polymers have been sequestered within polyurea microcapsules and small molecule catalysts soaked through the shell walls to functionalize the soluble polymers. Reaction onto each type of support is quantitative and MacMillan, DMAP, and TEMPO test catalysts are shown to have faster reaction rates than the analogous resin-supported catalysts.