RESUMO
A perfluoropolyether (PFPE)-based microfluidic device with cross-junction microchannels was fabricated with the purpose of producing uniform droplets. The microchannels were developed using CO2 laser engraving. PFPE was chosen as the main material because of its excellent solvent resistance. Polyethylene glycol diacrylate (PEGDA) was mixed with PFPE to improve the hydrophilic properties of the inner surface of the microchannels. The microchannels of the polydimethylsiloxane microfluidic device had a blackened and rough surface after laser engraving. By contrast, the inner surface of the microchannels of the PFPE-PEGDA microfluidic device exhibited a smooth surface. The lower power and faster speed of the laser engraving resulted in the development of microchannels with smaller dimensions, less than 30 µm in depth. The PFPE and PFPE-PEGDA microfluidic devices were used to produce uniform water and oil droplets, respectively. We believe that such a PFPE-based microfluidic device with CO2-laser-engraved microchannels can be used as a microfluidic platform for applications in various fields, such as biological and chemical analysis, extraction, and synthesis.
RESUMO
Determining the aromaticity of various fluorinated benzenes is challenging as easily obtained experimental aromaticity [Δδ(Houter - Hinner)] necessitates the chemical shifts of inner and outer protons. This issue was addressed in porphyrinoids by replacing the electron-withdrawing (E.W.) groups at the meso-positions of porphyrins and allyliporphyrins. Electronic effects on aromaticity in porphyrinoids have not been thoroughly examined in the literature. In porphyrins, the effect of E.W. groups is minimal, making it difficult to establish a clear relationship between the aromaticity strength and E.W. groups. Conversely, in allyliporphyrins, stronger E.W. groups, such as indandione (IND) derivatives, significantly reduce the aromaticity of the parent structure. The IND derivatives disrupted the aromatic pathway of allyliporphyrin more effectively than those attached to porphyrins. This is attributed to the absence of ß-carbons in allyliporphyrins. The effect of electron-donating (E.D.) groups on porphyrins and allyliporphyrins was further investigated. Contrary to the initial assumption that the E.D. groups might enhance aromaticity owing to their ability to increase electron density, as the strength of the E.D. groups increased, the aromaticity of the porphyrinoids decreased. Despite the modest reduction in aromaticity, any form of electron perturbation reduces aromaticity. The aromaticity of various fluorinated benzenes is expected to parallel our observations of porphyrinoids as representative aromatic polyenes.
RESUMO
The NOD-, LRR-, and Pyrin domain-containing protein 3 (NLRP3) inflammasome plays key roles in regulating inflammation. Numerous studies show that the abnormal activation of NLRP3 associates with the initiation and progression of various diseases. Hence, the NLRP3 inflammasome may be a promising therapeutic target for these diseases. Octyl gallate (OG) is a small molecule with antioxidant, antimicrobial, antifungal, and anti-inflammatory activities; however, the mechanism underlying its anti-inflammatory activity is still unclear. Here, we developed a screening system for NLRP3-inflammasome inhibitors. A total of 3287 small molecules were screened for inhibitors of nigericin-induced NLRP3 oligomerization. OG was identified as a novel inhibitor. We show that OG directly targets the LRR domain of NLRP3 and thereby blocks the inflammatory cascade of the NLRP3 inflammasome. This contrasts with the mode-of-action of other direct NLRP3 inhibitors, which all bind to the NACHT domain of NLRP3. Interestingly, OG also inhibits the priming step by downregulating the Raf-MEK1/2-ERK1/2 axis. Thus, OG inhibits the NLRP3 inflammasome by two distinct mechanisms. Importantly, OG injection ameliorated the inflammation in mouse models of foot gout and sepsis. Our study identifies OG as a potential therapeutic agent for NLRP3-associated diseases.
Assuntos
Anti-Inflamatórios , Ácido Gálico , Inflamassomos , Proteína 3 que Contém Domínio de Pirina da Família NLR , Animais , Camundongos , Anti-Inflamatórios/farmacologia , Anti-Inflamatórios/uso terapêutico , Ácido Gálico/análogos & derivados , Inflamassomos/efeitos dos fármacos , Inflamação/tratamento farmacológico , Proteína 3 que Contém Domínio de Pirina da Família NLR/química , Proteína 3 que Contém Domínio de Pirina da Família NLR/metabolismo , Camundongos Endogâmicos C57BL , Masculino , Domínios ProteicosRESUMO
Although the accuracy of other types of robotic systems for total knee arthroplasty (TKA) has been assessed in cadaveric studies, no investigations have been performed to evaluate this newly advanced active robotic system. Therefore, the authors aimed to analyze the accuracy of bone resection in terms of thickness and alignment in a cadaveric study. Three cadaveric specimens (six knees) and an active robotic system (CUVIS Joint, CUREXO) were used in the study. Three surgeons with different experiences in robotic TKAs performed this cadaveric study using the same robotic protocol with two different implant designs. The thickness and angle of bone resection planes obtained from the optical tracking system and the difference between resection planes and the planning data were assessed to determine accuracy. With respect to the overall resection accuracy compared to the plan, the cutting depth accuracy was within 1.0 mm mean of root mean square (RMS), and the resection angle accuracy in terms of sagittal, coronal, and axial planes was within 1.0 degree mean RMS. In contrast, no significant differences were observed between the planned and measured values in terms of the resection angles and cutting thickness. The hip-knee-ankle angle at postoperative evaluation was 0.7 degrees ± 0.7 degrees (RMS 1.0 degrees). This in vivo study suggests that the use of this newly advanced active robotic system for TKA demonstrates a high degree of accuracy in terms of resection thickness and alignment. This finding supports the clinical application of this advanced robotic system. LEVEL OF EVIDENCE: Cadaveric study, Level V.
Assuntos
Artroplastia do Joelho , Prótese do Joelho , Osteoartrite do Joelho , Robótica , Humanos , Artroplastia do Joelho/métodos , Articulação do Joelho/cirurgia , Joelho/cirurgia , Cadáver , Osteoartrite do Joelho/cirurgiaRESUMO
This study evaluates the suitability of the plantaris tendon (PT) as a tendon graft donor for sports trauma reconstruction and proposes a predictive model for estimating PT length by using an individual's height and leg length. Anatomical dissection of 50 cadavers (32 males and 18 females) yielded precise measurements of PT length and width while also recording height and leg length. Among the lower limbs, 89% were suitable for at least one recommended graft suitability criterion. In addition, PT length exhibited robust positive correlations with height and leg length. Predictive equations were established for estimating the PT length based on leg length and height with consistency across sexes and sides: PT length = 0.605 + 0.396 × leg length (r = 0.721) and PT length = 1.480 + 0.193 × height (r = 0.626). This study underscores the grafting potential of the PT, providing a predictive tool that can aid surgeons in addressing tendon graft challenges within sports trauma scenarios.
RESUMO
Herein, we investigated the potential of plasma-activated water (PAW) as a wash solution for the microbial decontamination of cherry tomatoes. We analyzed the efficacy of PAW as a bactericidal agent based on reactive species and pH. Immersion for 5 min in PAW15 (generated via plasma activation for 15 min) was determined as optimal for microbial decontamination of fresh produce. The decontamination efficacy of PAW15 exceeded those of mimic solutions with equivalent reactive species concentrations and pH (3.0 vs. 1.7 log reduction), suggesting that the entire range of plasma-derived reactive species participates in decontamination rather than a few reactive species. PAW15-washing treatment achieved reductions of 6.89 ± 0.36, 7.49 ± 0.40, and 5.60 ± 0.05 log10 CFU/g in the counts of Bacillus cereus, Salmonella sp., and Escherichia coli O157:H7, respectively, inoculated on the surface of cherry tomatoes, with none of these strains detected in the wash solution. During 6 days of 25 °C storage post-washing, the counts of aerobic bacteria, yeasts, and molds were below the detection limit. However, PAW15 did not significantly affect the viability of RAW264.7 cells. These results demonstrate that PAW effectively inactivates microbes and foodborne pathogens on the surface of cherry tomatoes and in the wash solution. Thus, PAW could be used as an alternative wash solution in the fresh produce industry without cross-contamination during washing and environmental contamination by foodborne pathogens or potential risks to human health.
RESUMO
A new type of microfluidic bioreactor with fibrous micromixers for the ingredient mixing and a long macrochannel for the in vitro transcription reaction was fabricated for the continuous production of mRNA. The diameter of the fibrous microchannels in the micromixers was tuned by using an electrospun microfibrous disc with different microfiber diameters. The micromixer with a larger diameter of fibrous microchannels exhibited a better mixing performance than the others. The mixing efficiency was increased to 0.95 while the mixture was passed through the micromixers, suggesting complete mixing. To demonstrate the continuous production of mRNA, the ingredients for in vitro transcription were introduced into the perfluoropolyether microfluidic bioreactor. The mRNA synthesized by the microfluidic bioreactor had the same sequence and in vitro/in vivo performances as those prepared by the bulk reaction. The continuous reaction in the microfluidic bioreactor with efficient mixing performance can be used as a powerful platform for various microfluidic reactions.
Assuntos
Técnicas Analíticas Microfluídicas , Microfluídica , Desenho de EquipamentoRESUMO
Clostridium novyi-NT (C. novyi-NT) is an anaerobic bacterium that can be used for targeted cancer therapy because it germinates selectively in the hypoxic regions of tumor tissues. However, systemic administration of C. novyi-NT spores cannot effectively treat tumors because of the limited intratumoral delivery of active spores. In this study, we demonstrated that multifunctional porous microspheres (MPMs) containing C. novyi-NT spores have the potential for image-guided local tumor therapy. The MPMs can be repositioned under an external magnetic field, enabling precise tumor targeting and retention. Polylactic acid-based MPMs were prepared using the oil-in-water emulsion technique and then coated with a cationic polyethyleneimine polymer prior to loading with negatively charged C. novyi-NT spores. The C. novyi-NT spores delivered by MPMs were released and germinated in a simulated tumor microenvironment, effectively secreting proteins cytotoxic to tumor cells. In addition, the germinated C. novyi-NT induced immunogenic death of the tumor cells and M1 polarization of macrophages. These results indicate that MPMs encapsulated with C. novyi-NT spores have great potential for image-guided cancer immunotherapy.
Assuntos
Neoplasias , Esporos Bacterianos , Humanos , Microesferas , Composição de Bases , Porosidade , Filogenia , RNA Ribossômico 16S , Análise de Sequência de DNA , Neoplasias/patologia , Imunoterapia , Microambiente TumoralRESUMO
Polydimethylsiloxane (PDMS) microfluidic devices with chaotic microfibrous channels were fabricated for the continuous production of lipid nanoparticles (LNPs). Electrospun poly(ε-caprolactone) (PCL) microfibrous matrices with different diameters (3.6 ± 0.3, 6.3 ± 0.4, and 12.2 ± 0.8 µm) were used as a template to develop microfibrous channels. The lipid solution (in ethanol) and water phase were introduced into the microfluidic device as the discontinuous and continuous phases, respectively. The smaller diameter of microfibrous channels and the higher flow rate of the continuous phase resulted in the smaller LNPs with a narrower size distribution. The multiple-splitting of the discontinuous phase and the microscale contact between the two phases in the microfibrous channels were the key features of the LNP production in our approach. The LNPs containing doxorubicin with different average sizes (89.7 ± 35.1 and 190.4 ± 66.4 nm) were prepared using the microfluidic devices for the potential application in tumor therapy. In vitro study revealed higher cellular uptake efficiency and cytotoxicity of the smaller LNPs, especially in the HepG2 cells. The microfluidic devices with microfibrous channels can be widely used as a continuous and high-throughput platform for the production of LNPs containing various active agents.
Assuntos
Lipídeos , Nanopartículas , Lipossomos , Dispositivos Lab-On-A-ChipRESUMO
A 15-year-old girl with congenital methemoglobinemia and no prior anesthetic history presented for the extraction of multiple impacted molars. Pulse oximetry values were expected to complicate the accurate monitoring of her oxygenation status in the perioperative period. An arterial line was placed for hemodynamic monitoring, arterial blood gas (ABG) analysis, and obtaining the methemoglobin (MetHgb) level and additional blood gases if clinically indicated. A continuous CO-oximeter was also used. Her intraoperative course was uneventful and she was discharged home on the same day of the procedure. This report reviews this rare condition and describes the monitoring methods utilized to assess her oxygen and methemoglobin levels, as well as the anesthetic techniques and pharmacologic agents employed. With appropriate intraoperative monitoring and careful drug selection, pediatric patients with this unusual condition can safely undergo general anesthesia.
RESUMO
Chitosan (CTS)/gelatin (GEL)/poly(vinyl alcohol) (PVA)-based composite films with different concentrations of Duchesnea indica extract (DIE) (6.25 and 25 mg/mL), an antimicrobial agent, were manufactured using a casting technique. Results indicated that elongation at break decreased as DIE was added at higher concentrations. Composite films showed no significant differences in thickness, tensile strength, and water vapor permeability. Scanning electron microscopy images revealed that DIE was successfully incorporated into film matrices to interact with polymers. The addition of DIE to the film inhibited the growth of S. aureus by up to 4.9 log CFU/mL. The inhibitory effect on S. aureus using DIE-incorporated coating applied to strawberries was greatest at room temperature storage for 24 h only when it was coated twice or more. The maximum inhibition in strawberries was 2.5 log CFU/g when they were coated twice and 3.2 log CFU/g when they were coated three times. The results of this study suggest that DIE could be used as a natural antimicrobial agent, and DIE-integrated CTS/GEL/PVA films or coatings have potential as a food packaging alternative for preventing foodborne pathogen contamination.
RESUMO
CO2 -triggered in situ hydrogels is developed from waterborne poly(ε-caprolactone)-based polyurethane (PU) dispersion and aqueous polyethyleneimine (PEI) solution without any other chemicals and apparatus (e.g., UV light). In the approach, nontoxic CO2 in air is used as a selective trigger for the hydrogel formation. CO2 adsorption onto PEI results in the formation of ammonium cations in PEI and the subsequent multiple ionic crosslinking between PU and PEI chains. Besides the amount of CO2 in air, the rate of hydrogel formation can be controlled by NaHCO3 in the PU-PEI mixture, which serves as a CO2 supplier. The PU hydrogels exhibit tough and stretchable properties with high tensile strength (2.05 MPa) and elongation at break (438.24%), as well as biocompatibility and biodegradability. In addition, the PU hydrogels exhibit high adhesion strength on skin and injectability due to the in situ formation. It is believed that these PU hydrogels have the ideal features for various future applications, such as tissue adhesion barriers, wound dressing, artificial skin, and injectable fillers.
Assuntos
Hidrogéis , Poliuretanos , Hidrogéis/química , Poliuretanos/química , Polietilenoimina/química , Dióxido de Carbono , Resistência à TraçãoRESUMO
Reexpansion pulmonary edema (RPE) is an exceedingly rare and potentially fatal complication of a rapidly reexpanded lung following evacuation of air or fluid from the pleural space secondary to conditions such as a mediastinal mass, pleural effusion, or pneumothorax. Clinical presentations can range from mild radiographic changes to acute respiratory failure and hemodynamic instability. The rapidly progressive nature of the disease makes it important for clinicians to appropriately diagnose and manage patients who develop RPE. We present a case of a child with a large malignant pleural effusion who developed severe RPE after tube thoracostomy and ultimately required venoarterial extracorporeal membrane oxygenation (VA-ECMO). The patient was 7-year-old Caucasian male with newly diagnosed ambiguous T cell myeloid leukemia. A chest computerized tomography (CT) demonstrated a large pleural effusion causing tracheal shift and left bronchus compression as well as an anterior mediastinal mass causing compression of the right atria and right ventricle. Tube thoracostomy was performed in the operating room (OR) with deep sedation. The procedure was complicated with hypoxemia, bradycardia, and pulseless cardiac arrest. After return of spontaneous circulation, the child continued to have refractory hypoxemia, profound hypotension, and frothy secretions. Endotracheal intubation was performed with a size 5.0 cuffed endotracheal tube. Chest radiograph demonstrated opacification of the left hemithorax with chest infiltrates. Patient required VA-ECMO for circulatory support. Supportive therapy of RPE was continued and decannulation was done on day three. Tracheal extubation was performed on day five.
RESUMO
Aptamer-based methods for detecting pesticides are more efficient than antibody-based methods by high thermal stability, low molecular weight, easy modification, and low cost. In this study, the systematic evolution of ligands by exponential enrichment (SELEX) process, combined with next-generation sequencing (NGS), was performed to select aptamers specific to the pesticide, diazinon, which was fixed on a sol-gel-coated nanoporous-anodized aluminum oxide membrane to overcome the immobilization effect of general method and simplify the elution step. The frequency of specific nucleotide sequences obtained after SELEX rounds was directly analyzed using NGS to eliminate the time-consuming cloning process used in the general SELEX methods. Nine sequences with the highest frequency after SELEX round 10 followed by NGS were selected and tested to derive their binding affinity with the target, diazinon, through circular dichroism (CD) spectrophotometry. The CD signal difference of the aptamer candidates ranged from 0.13 to 2.242 mdeg between diazinon-only treated and diazinon-aptamer-treated samples at a wavelength near 270 nm. Aptamer D-4, which had the highest binding affinity from CD spectrophotometry analysis, showed no cross-reactivity with non-target pesticides, such as baycarb, bifenthrin, and pyridaben, but interacted with the other pesticides, fipronil and 2-phenylphenol. Therefore, an aptamer was effectively screened by selection of high-frequency candidates after SELEX-NGS followed by CD analysis with the highest difference signal. A follow-up study is needed to confirm whether the proposed SELEX process combined with NGS for the discovery of aptamers for new targets can further shorten the SELEX cycle by reducing the number of SELEX rounds to 10 or less.
Assuntos
Aptâmeros de Nucleotídeos , Nanoporos , Praguicidas , Aptâmeros de Nucleotídeos/química , Diazinon , Sequenciamento de Nucleotídeos em Larga Escala , Ligantes , Técnica de Seleção de Aptâmeros/métodosRESUMO
The coronavirus disease 2019 (COVID-19) pandemic has impacted the medical, social, and reproductive health of millions of people since its outbreak. The causative virus transmits, reproduces, and manifests through the respiratory tract. COVID-19 can invade any system of the body, including the cardiovascular and endocrine systems, through a secondary immune response. In particular, because the fatality rate is high in those over the age of 50 years, special attention is required during the medical care of this population. However, considering the benefit of therapy and the risk of COVID-19, high-quality evidence regarding individualized management in relation to hormone therapy is still insufficient in the field of gynecology. Furthermore, this review aims to serve as a reference for clinical application by analyzing and summarizing the results of studies reported to date regarding female hormone therapy in the context of the COVID-19 pandemic.
RESUMO
A polydimethylsiloxane (PDMS) microfluidic chip with well-interconnected microfibrous channels was fabricated by using an electrospun poly(ε-caprolactone) (PCL) microfibrous matrix and 3D-printed pattern as templates. The microfiber-templated microfluidic chip (MTMC) was used to produce nanoscale emulsions and spheres through multiple emulsification at many small micro-orifice junctions among microfibrous channels. The emulsion formation mechanisms in the MTMC were the cross-junction dripping or Y-junction splitting at the micro-orifice junctions. We demonstrated the high throughput and continuous production of water-in-oil emulsions and polyethylene glycol-diacrylate (PEG-DA) spheres with controlled size ranges from 2.84 µm to 83.6 nm and 1.03 µm to 45.7 nm, respectively. The average size of the water droplets was tuned by changing the micro-orifice diameter of the MTMC and the flow rate of the continuous phase. The MTMC theoretically produced 58 trillion PEG-DA nanospheres per hour without high shear force. In addition, we demonstrated the higher encapsulation efficiency of the PEG-DA microspheres in the MTMC than that of the microspheres fabricated by ultrasonication. The MTMC can be used as a powerful platform for the large-scale and continuous productions of emulsions and spheres.
Assuntos
Microfluídica , Água , Emulsões , MicroesferasRESUMO
BACKGROUND: Alendronate (Alen) is promising material used for bone-targeted drug delivery due to its high bone affinity and therapeutic effects on bone diseases. In addition, Alen can enhance the osteogenic differentiation of osteoblastic cell. Recently, nanodiamonds (NDs) with hardness, non-toxicity, and excellent biocompatibility are employed as promising materials for carrier systems and osteogenic differentiation. Therefore, we prepared Alen-conjugated NDs (Alen-NDs) and evaluated their osteogenic differentiation performances. METHODS: Alen-NDs were synthesized using DMTMM as a coupling reagent. Morphological change of Mouse calvaria-derived preosteoblast (MC3T3-E1) treated with Alen-NDs was observed using the confocal microscope. The osteogenic differentiation was confirmed by cell proliferation, alkaline phosphatase (ALP), calcium deposition, and real-time polymerase chain reaction assay. RESULTS: Alen-NDs were prepared to evaluate their effect on the proliferation and differentiation of osteoblastic MC3T3-E1 cells. The Alen-NDs had a size of about 100 nm, and no cytotoxicity at less than 100 µg/mL of concentration. The treatment of NDs and Alen-NDs reduced the proliferation rate of MC3T3-E1 cells without cell death. Confocal microscopy images confirmed that the treatment of NDs and Alen-NDs changed the cellular morphology from a fibroblastic shape to a cuboidal shape. Flow cytometry, alkaline phosphatase (ALP) activity, calcium deposition, and real-time polymerase chain reaction (RT-PCR) confirmed the higher differentiation of MC3T3-E1 cells treated by Alen-NDs, compared to the groups treated by osteogenic medium and NDs. The higher concentration of Alen-ND treated in MC3T3-E1 resulted in a higher differentiation level. CONCLUSIONS: Alen-NDs can be used as potential therapeutic agents for osteoporosis treatment by inducing osteogenic differentiation.
RESUMO
BACKGROUND: Autologous nerve grafts are the gold standard treatment for peripheral nerve injury treatment. However, this procedure cannot avoid sacrificing other nerves as a major limitation. The aim of the present study was to evaluate the potential of olfactory ensheathing cells (OECs) embedded in a nerve conduit. METHODS: A 10-mm segment of the sciatic nerve was resected in 21 rats, and the nerve injury was repaired with one of the following (n = 7 per group): autologous nerve graft, poly (ε-caprolactone) (PCL) conduit and OECs, and PCL conduit only. The consequent effect on nerve regeneration was measured based on the nerve conduction velocity (NCV), amplitude of the compound muscle action potential (ACMAP), wet muscle weight, histomorphometric analysis, and nerve density quantification. RESULTS: Histomorphometric analysis revealed nerve regeneration and angiogenesis in all groups. However, there were significant differences (p < 0.05) in the ACMAP nerve regeneration rate of the gastrocnemius and tibialis anterior muscles between the autologous graft (37.9 ± 14.3% and 39.1% ± 20.4%) and PCL only (17.8 ± 8.6% and 13.6 ± 5.8%) groups, and between the PCL only and PCL + OECs (46.3 ± 20.0% and 34.5 ± 14.6%) groups, with no differences between the autologous nerve and PCL + OEC groups (p > 0.05). No significant results in NCV, wet muscle weight, and nerve density quantification were observed among the 3 groups. CONCLUSION: A PCL conduit with OECs enhances the regeneration of injured peripheral nerves, offering a good alternative to autologous nerve grafts.
Assuntos
Regeneração Nervosa , Tecido Nervoso , Animais , Ratos , Ratos Sprague-Dawley , Nervo Isquiático , Alicerces TeciduaisRESUMO
BACKGROUND: Transdermal delivery is of great importance for the effective delivery of bioactive or therapeutic agents into a body. The microporation device based on radiofrequency can be used to enhance delivery efficiency by removing the epidermis layer. METHODS: The micropores were developed on pig skin and human cadaver skin with dermal and epidermal layers by the microporation device. The regeneration of micropores in the human cadaver skin caused by microporation was confirmed using an optical microscope and haematoxylin/eosin (H&E) staining. The permeability of fluorescein isothiocyanate-dextrans (FITC-dextrans) with different molecular weights through the pig and human cadaver skins were measured using Franz diffusion cell. RESULTS: The optical image and histological analysis confirmed that the micropores on the skin were recovered over time. The enhanced permeability through micropores was confirmed by Franz diffusion cell. The lower molecular weight of FITC-dextran permeated more on both human and pig skin. In addition, the permeation rate was higher in pig skin than in human skin. CONCLUSIONS: We believe that the microporation device can be used as a potential technique for effective transdermal drug delivery.
RESUMO
Sol-gel-based mesopores allow the entry of target small molecules retained in their cavity and aptamers to bind to target molecules. Herein, sol-gel-based materials are applied to screen-selective aptamers for small molecules, such as pesticides. To enhance the efficiency of aptamer screening using a sol-gel, it is necessary to increase the binding surface. In this study, we applied the sol-gel to an anodized aluminum oxide (AAO) membrane, and the morphological features were observed via electron microscopy after spin coating. The binding and elution processes were conducted and confirmed by fluorescence microscopy and polymerase chain reaction. The sol-gel coating on the AAO membrane formed a hollow nanocolumn structure. A diazinon-binding aptamer was bound to the diazinon-containing sol-gel-coated AAO membrane, and the bound aptamer was effectively retrieved from the sol-gel matrix by thermal elution. As a proof of concept, a sol-gel-coated AAO disc was mounted on the edge of a pipette tip, and the feasibility of the prepared platform for the systematic evolution of ligands by exponential enrichment (SELEX) of the aptamer binding was also confirmed. The proposed approach will be applied to an automated SELEX cycle using an automated dispenser, such as a pipetting robot, in the near future.