Interface engineering of cellobiose dehydrogenase improves interdomain electron transfer.

Cellobiose dehydrogenase (CDH) is a bioelectrocatalyst that enables direct electron transfer (DET) in biosensors and biofuel cells. The application of this bidomain hemoflavoenzyme for physiological glucose measurements is limited by its acidic pH optimum and slow interdomain electron transfer (IET) at pH 7.5. The reason for this rate-limiting electron transfer step is electrostatic repulsion at the interface between the catalytic dehydrogenase domain and the electron mediating cytochrome domain (CYT). We applied rational interface engineering to accelerate the IET for the pH prevailing in blood or interstitial fluid. Phylogenetic and structural analyses guided the design of 17 variants in which acidic amino acids were mutated at the CYT domain. Five mutations (G71K, D160K, Q174K, D177K, M180K) increased the pH optimum and IET rate. Structure-based analysis of the variants suggested two mechanisms explaining the improvements: electrostatic steering and stabilization of the closed state by hydrogen bonding. Combining the mutations into six combinatorial variants with up to five mutations shifted the pH optimum from 4.5 to 7.0 and increased the IET at pH 7.5 over 12-fold from 0.1 to 1.24 s-1 . While the mutants sustained a high enzymatic activity and even surpassed the IET of the wild-type enzyme, the accumulated positive charges on the CYT domain decreased DET, highlighting the importance of CYT for IET and DET. This study shows that interface engineering is an effective strategy to shift the pH optimum and improve the IET of CDH, but future work needs to maintain the DET of the CYT domain for bioelectronic applications.

A novel membraneless ß-glucan/O2 enzymatic fuel cell based on ß-glucosidase (RmBgl3B)/pyranose dehydrogenase (AmPDH) co-immobilized onto buckypaper electrode.

A novel membraneless ß-glucan/O2 enzymatic fuel cell was developed by combining a bioanode based on buckypaper modified with co-immobilized Agaricus meleagris pyranose dehydrogenase (AmPDH) and Rhodothermus marinus ß-glucosidase (RmBgl3B) (RmBgl3B-AmPDH/buckypaper) with a biocathode based on solid graphite modified with Myrothecium verrucaria bilirubin oxidase (MvBOx/graphite). AmPDH was connected electrochemically with the buckypaper using an osmium redox polymer in a mediated reaction, whereas MvBOx was connected with graphite in a direct electron transfer reaction. The fuel for the bioanode was produced by enzymatic hydrolysis of ß-glucan by the exoglucanase RmBgl3B into d-glucose, which in turn was enzymatically oxidised by AmPDH to generate a current response. This design allows to obtain an efficient enzymatic fuel cell, where the chemical energy converted into electrical energy is higher than the chemical energy stored in complex carbohydrate based fuel. The maximum power density of the assembled ß-glucan/O2 biofuel cell reached 26.3 ±â€¯4.6 µWcm-2 at 0.36 V in phosphate buffer containing 0.5 % (w/v) ß-glucan at 40 °C with excellent stability retaining 68.6 % of its initial performance after 5 days. The result confirms that ß-glucan can be employed as fuel in an enzymatic biofuel cell.

Electro-mechanically switchable hydrocarbons based on [8]annulenes.

Pure hydrocarbons with shape and conjugation properties that can be switched by external stimuli is an intriguing prospect in the design of new responsive materials and single-molecule electronics. Here, we develop an oligomeric [8]annulene-based material that combines a remarkably efficient topological switching upon redox changes with structural simplicity, stability, and straightforward synthesis: 5,12-alkyne linked dibenzo[a,e]cyclooctatetraenes (dbCOTs). Upon reduction, the structures accommodate a reversible reorganization from a pseudo-conjugated tub-shape to a conjugated aromatic system. This switching in oligomeric structures gives rise to multiple defined states that are deconvoluted by electrochemical, NMR, and optical methods. The combination of stable electromechanical responsivity and ability to relay electrons stepwise through an extended (pseudo-conjugated) π-system in partially reduced structures validate alkyne linked dbCOTs as a practical platform for developing new responsive materials and switches based on [8]annulene cores.

Supercapacitive biofuel cells.

Supercapacitive biofuel cells' (SBFCs) most recent advancements are herein disclosed. In conventional SBFCs the biocomponent is employed as the pseudocapacitive component, while in self-charging biodevices it also works as the biocatalyst. The performance of different types of SBFCs are summarized according to the categorization based on the biocatalyst employed: supercapacitive microbial fuel cells (s-MFCs), supercapacitive biophotovoltaics (SBPV) and supercapacitive enzymatic fuel cells (s-EFCs). SBFCs could be considered as promising 'alternative' energy devices (low-cost, environmentally friendly, and technically undemanding electric power sources etc.) being suitable for powering a new generation of miniaturized electronic applications.

Highly sensitive and stable fructose self-powered biosensor based on a self-charging biosupercapacitor.

Herein, we present an alternative approach to obtain a highly sensitive and stable self-powered biosensor that was used to detect D-fructose as proof of concept.In this platform, we perform a two-step process, viz. self-charging the biosupercapacitor for a constant time by using D-fructose as fuel and using the stored charge to realize the detection of D-fructose by performing several polarization curves at different D-fructose concentrations. The proposed BSC shows an instantaneous power density release of 17.6 mW cm-2 and 3.8 mW cm-2 in pulse mode and at constant load, respectively. Moreover, the power density achieved for the self-charging BSC in pulse mode or under constant load allows for an enhancement of the sensitivity of the device up to 10 times (3.82 ± 0.01 mW cm-2 mM-1, charging time = 70 min) compared to the BSC in continuous operation mode and 100 times compared to the normal enzymatic fuel cell. The platform can potentially be employed as a self-powered biosensor in food or biomedical applications.

Amperometric Flow-Injection Analysis of Phenols Induced by Reactive Oxygen Species Generated under Daylight Irradiation of Titania Impregnated with Horseradish Peroxidase.

Titanium dioxide (TiO2) is a unique material for biosensing applications due to its capability of hosting enzymes. For the first time, we show that TiO2 can accumulate reactive oxygen species (ROS) under daylight irradiation and can support the catalytic cycle of horseradish peroxidase (HRP) without the need of H2O2 to be present in the solution. Phenolic compounds, such as hydroquinone (HQ) and 4-aminophenol (4-AP), were detected amperometrically in flow-injection analysis (FIA) mode via the use of an electrode modified with TiO2 impregnated with HRP. In contrast to the conventional detection scheme, no H2O2 was added to the analyte solution. Basically, the inherited ability of TiO2 to generate reactive oxygen species is used as a strategy to avoid adding H2O2 in the solution during the detection of phenolic compounds. Electron paramagnetic resonance (EPR) spectroscopy indicates the presence of ROS on titania which, in interaction with HRP, initiate the electrocatalysis toward phenolic compounds. The amperometric response to 4-AP was linear in the concentration range between 0.05 and 2 µM. The sensitivity was 0.51 A M-1 cm-2, and the limit of detection (LOD) 26 nM. The proposed sensor design opens new opportunities for the detection of phenolic traces by HRP-based electrochemical biosensors, yet in a more straightforward and sensitive way following green chemistry principles of avoiding the use of reactive and harmful chemical, such as H2O2.

Two Routes for Extracellular Electron Transfer in Enterococcus faecalis.

Enterococcus faecalis cells are known to have ferric reductase activity and the ability to transfer electrons generated in metabolism to the external environment. We have isolated mutants defective in ferric reductase activity and studied their electron transfer properties to electrodes mediated by ferric ions and an osmium complex-modified redox polymer (OsRP). Electron transfer mediated with ferric ions and ferric reductase activity were both found to be dependent on the membrane-associated Ndh3 and EetA proteins, consistent with findings in Listeria monocytogenes In contrast, electron transfer mediated with OsRP was independent of these two proteins. Quinone in the cell membrane was required for the electron transfer with both mediators. The combined results demonstrate that extracellular electron transfer from reduced quinone to ferric ions and to OsRP occurs via different routes in the cell envelope of E. faecalisIMPORTANCE The transfer of reducing power in the form of electrons, generated in the catabolism of nutrients, from a bacterium to an extracellular acceptor appears to be common in nature. The electron acceptor can be another cell or abiotic material. Such extracellular electron transfer contributes to syntrophic metabolism and is of wide environmental, industrial, and medical importance. Electron transfer between microorganisms and electrodes is fundamental in microbial fuel cells for energy production and for electricity-driven synthesis of chemical compounds in cells. In contrast to the much-studied extracellular electron transfer mediated by cell surface exposed cytochromes, little is known about components and mechanisms for such electron transfer in organisms without these cytochromes and in Gram-positive bacteria such as E. faecalis, which is a commensal gut lactic acid bacterium and opportunistic pathogen.

Determination of the Distance Between the Cytochrome and Dehydrogenase Domains of Immobilized Cellobiose Dehydrogenase by Using Surface Plasmon Resonance with a Center of Mass Based Model.

Changes in the tertiary conformation of adsorbed biomolecules can induce detectable shifts (Δθr) in the surface plasmon resonance (SPR) angle. Here it is shown how to calculate the corresponding shifts in the adsorbate's center of mass (Δzavg) along the sensing surface normal from the measured Δθr. The novel developed model was used for determining the mean distance between the cytochrome (CYT) and flavodehydrogenase (DH) domains of the enzyme cellobiose dehydrogenase (CDH) isolated from the fungi Neurospora crassa, Corynascus thermophilus, and Myriococcum thermophilum as a function of pH, [Ca2+], and substrate concentration. SPR confirmed the results from earlier electrochemical and SAXS studies stating that the closed conformation, where the two domains are in close vicinity, is stabilized by a lower pH and an increased [Ca2+]. Interestingly, an increasing substrate concentration in the absence of any electron acceptors stabilizes the open conformation as the electrostatic repulsion due to the reaped electrons pushes the DH and CYT domains apart. The accuracy of distance determination was limited mostly by the random fluctuations between replicate measurements, and it was possible to detect movements <1 nm of the domains with respect to each other. The results agreed with calculations using already established models treating conformational changes as contraction or expansion of the thickness of the adsorbate layer (tprotein). Although the models yielded equivalent results, in this case, the Δzavg-based method also works in situations, where the adsorbate's mass is not evenly distributed within the layer.

Conductive and enzyme-like silk fibers for soft sensing application.

A combination of supercritical carbon dioxide (scCO2) impregnation of pyrrole and sonochemical transformation of permanganate (KMnO4) was used to impart conductive and catalytic properties to silk fibers. The results indicated that the conductivity (from polypyrrole -PPy) and catalytic activities (from manganese dioxide -MnO2) were independent and complementary within the processing parameters used. The enhanced conductivity was attributed to scCO2 preferentially distributing the pyrrole monomers along with the silk internal fibrillar structure and hence, yielding a more linear PPy. The oxidative properties of the PPy-MnO2-silk hybrid showed an enzyme-like behavior for the degradation of hydrogen peroxide (H2O2) with a Km of about 13 mM and specific activity of 1470 ±â€¯75 µmol/min/g. Finally, we demonstrated that the PPy-MnO2-silk hybrid could be used as soft working electrodes for the simultaneous degradation and detection of H2O2.

A novel starch-binding laccase from the wheat pathogen Zymoseptoria tritici highlights the functional diversity of ascomycete laccases.

BACKGROUND: Laccases are multicopper oxidases, which are assigned into auxiliary activity family 1 (AA1) in the CAZy database. These enzymes, catalyzing the oxidation of phenolic and nonphenolic substrates coupled to reduction of O2 to H2O, are increasingly attractive as eco-friendly oxidation biocatalysts. Basidiomycota laccases are well characterized due to their potential in de-lignification of lignocellulose. By contrast, insight into the biochemical diversity of Ascomycota counterparts from saprophytes and plant pathogens is scarce. RESULTS: Here, we report the properties of the laccase from the major wheat pathogen Zymoseptoria tritici (ZtrLac1A), distinguished from common plant fungal pathogens by an apoplastic infection strategy. We demonstrate that ZtrLac1A is appended to a functional starch-binding module and displays an activity signature disfavoring relatively apolar phenolic redox mediators as compared to the related biochemically characterized laccases. By contrast, the redox potential of ZtrLac1A (370 mV vs. SHE) is similar to ascomycetes counterparts. The atypical specificity is consistent with distinctive sequence substitutions and insertions in loops flanking the T1 site and the enzyme C-terminus compared to characterized laccases. CONCLUSIONS: ZtrLac1A is the first reported modular laccase appended to a functional starch-specific carbohydrate binding module of family 20 (CBM20). The distinct specificity profile of ZtrLac1A correlates to structural differences in the active site region compared to previously described ascomycetes homologues. These differences are also highlighted by the clustering of the sequence of ZtrLac1A in a distinct clade populated predominantly by plant pathogens in the phylogenetic tree of AA1 laccases. The possible role of these laccases in vivo merits further investigations. These findings expand our toolbox of laccases for green oxidation and highlight the binding functionality of CBM-appended laccases as versatile immobilization tags.

The influence of the shape of Au nanoparticles on the catalytic current of fructose dehydrogenase.

Graphite electrodes were modified with triangular (AuNTrs) or spherical (AuNPs) nanoparticles and further modified with fructose dehydrogenase (FDH). The present study reports the effect of the shape of these nanoparticles (NPs) on the catalytic current of immobilized FDH pointing out the different contributions on the mass transfer-limited and kinetically limited currents. The influence of the shape of the NPs on the mass transfer-limited and the kinetically limited current has been proved by using two different methods: a rotating disk electrode (RDE) and an electrode mounted in a wall jet flow-through electrochemical cell attached to a flow system. The advantages of using the wall jet flow system compared with the RDE system for kinetic investigations are as follows: no need to account for substrate consumption, especially in the case of desorption of enzyme, and studies of product-inhibited enzymes. The comparison reveals that virtually identical results can be obtained using either of the two techniques. The heterogeneous electron transfer (ET) rate constants (kS) were found to be 3.8 ± 0.3 s-1 and 0.9 ± 0.1 s-1, for triangular and spherical NPs, respectively. The improvement observed for the electrode modified with AuNTrs suggests a more effective enzyme-NP interaction, which can allocate a higher number of enzyme molecules on the electrode surface. Graphical abstract The shape of gold nanoparticles has a crucial effect on the catalytic current related to the oxidation of D-(-)-fructose to 5-keto-D-(-)-fructose occurring at the FDH-modified electrode surface. In particular, AuNTrs have a higher effect compared with the spherical one.

Extracellular electron transfer features of Gram-positive bacteria.

Electroactive microorganisms possess the unique ability to transfer electrons to or from solid phase electron conductors, e.g., electrodes or minerals, through various physiological mechanisms. The processes are commonly known as extracellular electron transfer and broadly harnessed in microbial electrochemical systems, such as microbial biosensors, microbial electrosynthesis, or microbial fuel cells. Apart from a few model microorganisms, the nature of the microbe-electrode conductive interaction is poorly understood for most of the electroactive species. The interaction determines the efficiency and a potential scaling up of bioelectrochemical systems. Gram-positive bacteria generally have a thick electron non-conductive cell wall and are believed to exhibit weak extracellular electron shuttling activity. This review highlights reported research accomplishments on electroactive Gram-positive bacteria. The use of electron-conducting polymers as mediators is considered as one promising strategy to enhance the electron transfer efficiency up to application scale. In view of the recent progress in understanding the molecular aspects of the extracellular electron transfer mechanisms of Enterococcus faecalis, the electron transfer properties of this bacterium are especially focused on. Fundamental knowledge on the nature of microbial extracellular electron transfer and its possibilities can provide insight in interspecies electron transfer and biogeochemical cycling of elements in nature. Additionally, a comprehensive understanding of cell-electrode interactions may help in overcoming insufficient electron transfer and restricted operational performance of various bioelectrochemical systems and facilitate their practical applications.

Supercapacitor/biofuel cell hybrid device employing biomolecules for energy conversion and charge storage.

We report on a hybrid bioelectrochemical system that integrates an energy converting part, viz. a glucose/oxygen enzymatic fuel cell, with a charge-storing component, in which the redox features of the immobilized redox protein cytochrome c (cyt c) were utilized. Bilirubin oxidase and pyrroloquinoline quinone-dependent glucose dehydrogenase (PQQ-GDH) were employed as the biocatalysts for dioxygen reduction and glucose oxidation, respectively. A bi-protein PQQ-GDH/cyt c signal chain was created that facilitates electron transfer between the enzyme and the electrode surface. The assembled supercapacitor/biofuel cell hybrid biodevice displays a 15 times higher power density tested in the pulse mode compared to the performance achieved from the continuously operating regime (4.5 and 0.3 µW cm-2, respectively) with an 80% residual activity after 50 charge/discharge pulses. This can be considered as a notable step forward in the field of glucose/oxygen membrane-free, biocompatible hybrid power sources.

Cellobiose dehydrogenase hosted in lipidic cubic phase to improve catalytic activity and stability.

Lipidic cubic phase systems (LCPs) are excellent carriers for immobilized enzymes due to their biocompatibility and well-defined nanoporous structure. Lipidic cubic phases act as a convenient matrix to incorporate enzymes and hold them in the vicinity of electrode surfaces in their fully active forms. Corynascus thermophilus cellobiose dehydrogenase (CtCDH) was trapped in a monoolein cubic phase, which increased not only its stability, but also its catalytic performance with both enhanced mediated and direct electron transfer with electrodes. For studies of mediated electron transfer, three mediators with different formal potentials (E°') were employed: horse-heart cytochrome c (cyt c), electron acceptor active with the cytochrome domain of CtCDH, and 2,6-dichlorophenolindophenol (DCPIP) as well as hexaammineruthenium(II) chloride [Ru(NH3)Cl2] both electron acceptors with the dehydrogenase domain. Ru(NH3)Cl2, having the most negative E°' of -0.138V vs. Ag|AgCl at pH7.5, gave a catalytic current for lactose oxidation of 32.10µAcm-2 in MOPS buffer at pH7.5. The process carried out in the same solution but under direct electron conditions transfer resulted in a catalytic current of 9.22µAcm-2. Electrodes covered with CtCDH in a LCP film retained their catalytic activity after 28days showing a slightly increased current density after 6days.

Two-dimensional graphene paper supported flexible enzymatic fuel cells.

Application of enzymatic biofuel cells (EBFCs) in wearable or implantable biomedical devices requires flexible and biocompatible electrode materials. To this end, freestanding and low-cost graphene paper is emerging among the most promising support materials. In this work, we have exploited the potential of using graphene paper with a two-dimensional active surface (2D-GP) as a carrier for enzyme immobilization to fabricate EBFCs, representing the first case of flexible graphene papers directly used in EBFCs. The 2D-GP electrodes were prepared via the assembly of graphene oxide (GO) nanosheets into a paper-like architecture, followed by reduction to form layered and cross-linked networks with good mechanical strength, high conductivity and little dependence on the degree of mechanical bending. 2D-GP electrodes served as both a current collector and an enzyme loading substrate that can be used directly as a bioanode and biocathode. Pyrroloquinoline quinone dependent glucose dehydrogenase (PQQ-GDH) and bilirubin oxidase (BOx) adsorbed on the 2D-GP electrodes both retain their biocatalytic activities. Electron transfer (ET) at the bioanode required Meldola blue (MB) as an ET mediator to shuttle electrons between PQQ-GDH and the electrode, but direct electron transfer (DET) at the biocathode was achieved. The resulting glucose/oxygen EBFC displayed a notable mechanical flexibility, with a wide open circuit voltage range up to 0.665 V and a maximum power density of approximately 4 µW cm-2 both fully competitive with reported values for related EBFCs, and with mechanical flexibility and facile enzyme immobilization as novel merits.

Fuel-independent and membrane-less self-charging biosupercapacitor.

We present a fuel-independent self-charging biosupercapacitor comprising an oxygen reducing enzymatic biocathode and an opposing bioelectrode, in which the supercapacitive properties of immobilised protein were utilised. Our findings disclose a novel hybrid type of bioelectrochemical systems, which can potentially be employed as an autonomous power supplier under substrate-deficient conditions.

Highly Sensitive Membraneless Fructose Biosensor Based on Fructose Dehydrogenase Immobilized onto Aryl Thiol Modified Highly Porous Gold Electrode: Characterization and Application in Food Samples.

In this paper we present a new method to electrodeposit highly porous gold (h-PG) onto a polycrystalline solid gold electrode without any template. The electrodeposition is carried out by first cycling the electrode potential between +0.8 and 0 V in 10 mM HAuCl4 with 2.5 M NH4Cl and then applying a negative potential for the production of hydrogen bubbles at the electrode surface. After that the modified electrode was characterized in sulfuric acid to estimate the real surface area ( Areal) to be close to 24 cm2, which is roughly 300 times higher compared to the bare gold electrodes (0.08 cm2). The electrode was further incubated overnight with three different thiols (4-mercaptobenzoic acid (4-MBA), 4-mercaptophenol (4-MPh), and 4-aminothiophenol (4-APh)) in order to produce differently charged self-assembled monolayers (SAMs) on the electrode surface. Finally a fructose dehydrogenase (FDH) solution was drop-cast onto the electrodes. All the modified electrodes were investigated by cyclic voltammetry both under nonturnover and turnover conditions. The FDH/4-MPh/h-PG exhibited two couples of redox peaks for the heme c1 and heme c2 of the cytochrome domain of FDH and as well as a well pronounced catalytic current density (about 1000 µA cm-2 in the presence of 10 mM fructose) due to the presence of -OH groups on the electrode surface, which stabilize and orientate the enzyme layer on the electrode surface. The FDH/4-MPh/h-PG based electrode showed the best analytical performance with an excellent stability (90% retained activity over 90 days), a detection limit of 0.3 µM fructose, a linear range between 0.05 and 5 mM, and a sensitivity of 175 ± 15 µA cm-2 mM-1. These properties were favorably compared with other fructose biosensors reported in the literature. The biosensor was successively tested to quantify the fructose content in food and beverage samples. No significant interference present in the sample matrixes was observed.

Extracellular Electron Transfer by the Gram-Positive Bacterium Enterococcus faecalis.

Extracellular electron transfer (EET) in microbial cells is essential for certain biotechnological applications and contributes to the biogeochemical cycling of elements and syntrophic microbial metabolism in complex natural environments. The Gram-positive lactic acid bacterium Enterococcus faecalis, an opportunistic human pathogen, is shown to be able to transfer electrons generated in fermentation metabolism to electrodes directly and indirectly via mediators. By exploiting E. faecalis wild-type and mutant cells, we demonstrate that reduced demethylmenaquinone in the respiratory chain in the bacterial cytoplasmic membrane is crucial for the EET. Heme proteins are not involved, and cytochrome bd oxidase activity was found to attenuate EET. These results are significant for the mechanistic understanding of EET in bacteria and for the design of microbial electrochemical systems. The basic findings infer that in dense microbial communities, such as in biofilm and in the large intestine, metabolism in E. faecalis and similar Gram-positive lactic acid bacteria might be electrically connected to other microbes. Such a transcellular electron transfer might confer syntrophic metabolism that promotes growth and other activities of bacteria in the microbiota of humans and animals.

Direct Electron Transfer of Dehydrogenases for Development of 3rd Generation Biosensors and Enzymatic Fuel Cells.

Dehydrogenase based bioelectrocatalysis has been increasingly exploited in recent years in order to develop new bioelectrochemical devices, such as biosensors and biofuel cells, with improved performances. In some cases, dehydrogeases are able to directly exchange electrons with an appropriately designed electrode surface, without the need for an added redox mediator, allowing bioelectrocatalysis based on a direct electron transfer process. In this review we briefly describe the electron transfer mechanism of dehydrogenase enzymes and some of the characteristics required for bioelectrocatalysis reactions via a direct electron transfer mechanism. Special attention is given to cellobiose dehydrogenase and fructose dehydrogenase, which showed efficient direct electron transfer reactions. An overview of the most recent biosensors and biofuel cells based on the two dehydrogenases will be presented. The various strategies to prepare modified electrodes in order to improve the electron transfer properties of the device will be carefully investigated and all analytical parameters will be presented, discussed and compared.