The association between wet overactive bladder and consumption of tea, coffee, and caffeine: Results from 2005-2018 National Health and Nutrition Examination Survey.

BACKGROUND & AIMS: Previous studies have reported an inconsistent relationship between overactive bladder (OAB) and the consumption of tea, coffee, and caffeine. Our study aims to determine these associations in a large and nationally representative adult sample. METHODS: This cross-sectional study included 15,379 participants from the 2005-2018 US National Health and Nutrition Examination Survey (NHANES) database. The outcome was the risk of wet OAB that was diagnosed when the OAB symptom score was ≥3 with urgent urinary incontinence and excluded other diseases affecting diagnosis. The exposures were the consumption of tea, coffee, and caffeine. Weighted logistic regression models were established to explore these associations by calculating odds ratios (OR) and 95% confidence intervals (CI), as did restricted cubic splines (RCS) used to analyze the nonlinear associations. RESULT: Of all the participants (n = 15,379), 2207 had wet OAB. Mean [SE] consumption of tea, total coffee, caffeinated coffee, decaffeinated coffee, and caffeine was 233.6 [15.7] g/day, 364.3 [15.5] g/day, 301.6 [14.9] g/day, 62.7 [7.9] g/day, 175.5 [6.6] mg/day in participants with wet OAB, respectively. In the fully adjusted model, compared to those without tea consumption, the high consumption of tea (>481 g/day) was associated with an increased risk of wet OAB (OR: 1.29; 95%CI: 1.01-1.64). Low decaffeinated coffee (0.001-177.6 g/day) had a negative association with the risk (OR: 0.66; 95%CI: 0.49-0.90). In the RCS analysis, tea consumption showed a positive linear association with the risk of wet OAB, and decaffeinated coffee showed a nonlinear relationship with the risk and had a turning point of 78 g/day in the U-shaped curve between 0 and 285 g/day. Besides, total coffee, caffeinated coffee, and caffeine consumption had no significant association with the risk. Interestingly, in the high tea consumption, participants with high total coffee consumption [>527.35 g/day, OR and 95%CI: 2.14(1.16-3.94)] and low caffeine consumption [0.1-74.0 mg/day, OR and 95%CI: 1.50(1.03-2.17)] were positively associated with the risk of wet OAB. CONCLUSION: High tea consumption was associated with the increased risk of wet OAB, especially intake together with high total coffee and low caffeine consumption, but no significant association with the single consumption of total coffee and caffeine. Low decaffeinated coffee was associated with a decreased risk of wet OAB. It is necessary to control tea intake when managing the liquid intake of wet OAB patients.

Detection and quantification of JAK2V617F copy number by droplet digital PCR versus real-time PCR.

Myeloproliferative neoplasm (MPN) usually has an adverse prognosis, progressing to acute leukemia or splanchnic vein thromboses (SVTs). Therefore, early diagnosis and intervention are significantly important. Clinically, the burden of JAK2V617F is a vital diagnostic basis, which can be detected during the early stage of MPN. Thus, an accurate and rapid detective technique is urgently required. In recent years, real-time quantitative PCR (qPCR) has primarily been applied to detect the copies of JAK2V617F, whereas droplet digital PCR (ddPCR), a novel and promising detective tool, can conduct precise and repeatable quantification of nucleic acid copies without relying on the standard curve. In our study, both qPCR and ddPCR are used to evaluate the mutation burden of JAK2V617F in a series of gradient diluted standards and clinical JAK2V617F-positive MPN patients' bone marrow samples collected, while using next-generation sequencing technology (NGS) as a contrast. With the help of statistical methods, our study concluded that ddPCR had a better performance in accuracy, sensitivity, and stability, especially in a low burden. Regarding the accuracy, ddPCR showed a better linearity (Pearson R2 = 0.9926; P < 0.0001) than qPCR (Pearson R2 = 0.9772; P < 0.0001). What is more, ddPCR showed lower intra-assay and inter-assay CVs and the limit of detection (LOD) for the series of diluted standards than qPCR, demonstrating better stability and lower LOD. In a nutshell, ddPCR is a more promising technique for the detection and quantification of JAK2V617F.

Long Noncoding RNA RP11-732M18.3 Promotes Glioma Angiogenesis by Upregulating VEGFA.

Gliomas are the most aggressive and common type of malignant brain tumor, with limited treatment options and a dismal prognosis. Angiogenesis, a hallmarks of cancer, is one of two critical events in the progression of gliomas. Accumulating evidence has demonstrated that in glioma dysregulated molecules like long noncoding RNAs (lncRNAs), are closely linked to tumorigenesis and prognosis. However, the effects of and mechanisms of action of lncRNAs during tumor angiogenesis are poorly understood. The effect of lncRNA RP11-732M18.3 on angiogenesis was elucidated through an intracranial orthotopic glioma model, immunohistochemistry, and an in vitro angiogenesis assay. Co-culture experiments and cell migration assays were performed to investigate the function of lncRNA RP11-732M18.3 in vitro. lncRNA RP11-732M18.3 increased CD31+ microvessel density, and overexpression of lncRNA RP11-732M18.3 resulted in poor mouse survival. lncRNA RP11-732M18.3 promoted endothelial cell migration and tube formation. Nomogram and Kaplan-Meier survival analyses indicated that higher VEGFA is correlated with a poor prognosis. Mechanistically, lncRNA RP11-732M18.3 promotes angiogenesis by increasing the nuclear level of EP300 and facilitating the transcription and secretion of VEGFA. Our study contributes to the latest understanding of glioma angiogenesis and prognosis. lncRNA RP11-732M18.3 may be a potential treatment target in glioma.

Long non­coding RNA AL355711 promotes smooth muscle cell migration through the ABCG1/MMP3 pathway.

Atherosclerosis and related cardiovascular diseases pose severe threats to human health worldwide. There is evidence to suggest that at least 50% of foam cells in atheromas are derived from vascular smooth muscle cells (VSMCs); the first step in this process involves migration to human atherosclerotic lesions. Long non­coding RNAs (lncRNAs) have been found to play significant roles in diverse biological processes. The present study aimed to investigate the role of lncRNAs in VSMCs. The expression of lncRNAs or mRNAs was detected using reverse transcription­quantitative polymerase chain reaction. The Gene Expression Omnibus datasets in the NCBI portal were searched using the key words 'Atherosclerosis AND tissue AND Homo sapiens' and the GSE12288 dataset. Gene expression in circulating leukocytes was measured to identify patients with coronary artery disease (CAD) or controls, and used to analyze the correlation coefficient and expression profiles. The protein level of ATP­binding cassette sub­family G member 1 (ABCG1) and matrix metalloproteinase (MMP)3 was determined using immunohistochemistry and western blot analysis. The analysis of mouse aortic roots was performed using Masson's and Oil Red O staining. The expression of lncRNA AL355711, ABCG1 and MMP3 was found to be higher in human atherosclerotic plaques or in patients with atherosclerotic CAD. The correlation analysis revealed that ABCG1 may be involved in the regulation between lncRNA AL355711 and MMP3 in atherosclerotic CAD. The knockdown of lncRNA AL355711 inhibited ABCG1 transcription and smooth muscle cell migration. In addition, lncRNA AL355711 was found to regulate MMP3 expression through the ABCG1 pathway. The expression of ABCG1 and MMP3 was found to be high in an animal model of atherosclerosis. The results indicated that lncRNA AL355711 promoted VSMC migration and atherosclerosis partly via the ABCG1/MMP3 pathway. On the whole, the present study demonstrates that the inhibition of lncRNA AL355711 may serve as a novel therapeutic target for atherosclerosis. lncRNA AL355711 in circulating leukocytes may be a novel biomarker for atherosclerotic CAD.

TTDA inhibited apoptosis by regulating the p53-Bax/Bcl2 axis in glioma.

The trichothiodystrophy group A protein (TTDA) functions in nucleotide excision repair and basal transcription. TTDA plays a role in cancers and serves as a prognostic and predictive factor in high-grade serous ovarian cancer; however, its role in human glioma remains unknown. Here, we found that TTDA was overexpressed in glioma tissues. In vitro experiments revealed that TTDA overexpression inhibited apoptosis of glioma cells and promoted cell growth, whereas knockdown of TTDA had the opposite effect. Increased TTDA expression significantly decreased the Bax/Bcl2 ratio and the level of cleaved-caspase3. TTDA interacted with the p53 gene at the -1959 bp and -1530 bp region and regulated its transcription, leading to inhibition of the p53-Bax/Bcl2 mitochondrial apoptosis pathway in glioma cells. These results indicate that TTDA is an upstream regulator of p53-mediated apoptosis and acts as an oncogene, suggesting its value as a potential molecular target for the diagnosis and treatment of glioma.

E-jet 3D printed drug delivery implants to inhibit growth and metastasis of orthotopic breast cancer.

Drug-loaded implants have attracted considerable attention in cancer treatment due to their precise delivery of drugs into cancer tissues. Contrary to injected drug delivery, the application of drug-loaded implants remains underutilized given the requirement for a surgical operation. Nevertheless, drug-loaded implants have several advantages, including a reduction in frequency of drug administration, minimal systemic toxicity, and increased delivery efficacy. Herein, we developed a new, precise, drug delivery device for orthotopic breast cancer therapy able to suppress breast tumor growth and reduce pulmonary metastasis using combination chemotherapy. Poly-lactic-co-glycolic acid scaffolds were fabricated by 3D printing to immobilize 5-fluorouracil and NVP-BEZ235. The implantable scaffolds significantly reduced the required drug dosages and ensured curative drug levels near tumor sites for prolonged period, while drug exposure to normal tissues was minimized. Moreover, long-term drug release was achieved, potentially allowing one-off implantation and, thus, a major reduction in the frequency of drug administration. This drug-loaded scaffold has great potential in anti-tumor treatment, possibly paving the way for precise, effective, and harmless cancer therapy.

E-Jet 3D-Printed Scaffolds as Sustained Multi-Drug Delivery Vehicles in Breast Cancer Therapy.

PURPOSE: Combination chemotherapy is gradually receiving more attention because of its potential synergistic effect and reduced drug doses in clinical application. However, how to precisely control drug release dose and time using vehicles remains a challenge. This work developed an efficient drug delivery system to combat breast cancer, which can enhance drug effects despite reducing its concentration. METHODS: Controlled-release poly-lactic-co-glycolic acid (PLGA) scaffolds were fabricated by E-jet 3D printing to deliver doxorubicin (DOX) and cisplatin (CDDP) simultaneously. RESULTS: This drug delivery system allowed the use of a reduced drug dosage resulting in a better effect on the human breast cancer cell apoptosis and inhibiting tumor growth, compared with the effect of each drug and the two drugs administrated without PLGA scaffolds. Our study suggested that DOX-CDDP-PLGA scaffolds could efficiently destroy MDA-MB-231 cells and restrain tumor growth. CONCLUSIONS: The 3D printed PLGA scaffolds with their time-programmed drug release might be useful as a new multi-drug delivery vehicle in cancer therapy, which has a potential advantage in a long term tumor cure and prevention of tumor recurrence.

The topography of fibrous scaffolds modulates the paracrine function of Ad-MSCs in the regeneration of skin tissues.

Injuries to the skin are common in daily life, and a certain type or size of defect is not easily restored using conventional dressings or naturally. The repair of these defects requires restoration of function in regenerated tissues. In this study, a tissue engineered skin was designed and fabricated using a bio-3D printing system. Polycaprolactone and bacterial cellulose comprised the scaffold, due to their excellent biocompatibility and multifunctionality. Adipose-derived mesenchymal stem cells (Ad-MSCs) were seeded onto the scaffold to functionalize it as an artificial skin. The finished artificial skin had mechanical properties similar to that of natural skin, and its fibrous structure providing a unique micro-environment that could regulate the paracrine function of the Ad-MSCs. This effect could be greatly increased by changes in the characteristics of the biomaterials. The artificial skin exhibited high biological activity, strong induction of cell recruitment, migration, growth and up-regulation of gene expression of relevant factors, resulting in excellent wound healing characteristics. This study clarified novel design aspects of cell-material interactions in which the topographical characteristics of materials can be further developed to establish cell signaling or communication networks that take advantage of the paracrine actions of Ad-MSCs to promote specific tissue regeneration or repair characteristics.

The binding of lncRNA RP11-732M18.3 with 14-3-3 ß/α accelerates p21 degradation and promotes glioma growth.

BACKGROUND: Long noncoding RNAs (lncRNAs) have been identified as regulators of a number of developmental and tumorigenic processes. However, the functions of most lncRNAs in glioma remain unknown and the mechanisms governing the proliferation of tumor cells remain poorly defined. METHODS: Both in vitro and in vivo assays were performed to investigate the roles of lncRNAs in the pathophysiology of gliomas. lncRNA arrays were used to identify differentially expressed lncRNAs. Subcutaneous tumor formation and a brain orthotopic tumor model in nude mice were used to investigate the functions of lncRNAs in vivo. The in vitro functions of lncRNAs were analyzed by fluorescence-activated cell sorting, colony formation, and western blot analyses. RNA fluorescence in situ hybridization and immunoprecipitation were used to explore the underlying mechanisms. FINDINGS: Here, we describe the newly discovered noncoding RNA RP11-732M18.3, which is highly overexpressed in glioma cells and interacts with 14-3-3ß/α to promote glioma growth, acting as an oncogene. Overexpression of lncRNA RP11-732 M18.3 was associated with the proliferation of glioma cells and tumor growth in vitro and in vivo. Remarkably, lncRNA RP11-732M18.3 promoted cell proliferation and G1/S cell cycle transition. lncRNA RP11-732M18.3 is predominately localized in the cytoplasm. Mechanistically, the interaction of lncRNA RP11-732M18.3 with 14-3-3ß/α increases the degradation of the p21 protein. lncRNA RP11-732M18.3 promoted the recruitment of ubiquitin-conjugating enzyme E2 E1 to 14-3-3ß/α and the binding of 14-3-3ß/α with ubiquitin-conjugating enzyme E2 E1 (UBE2E1) promoted the degradation of p21. INTERPRETATION: Overall these data demonstrated that lncRNA RP11-732M18.3 regulates glioma growth through a newly described lncRNA-protein interaction mechanism. The inhibition of lncRNA RP11-732M18.3 could provide a novel therapeutic target for glioma treatment.

Enhanced growth and differentiation of myoblast cells grown on E-jet 3D printed platforms.

BACKGROUND: Skeletal muscle tissue engineering often involves the prefabrication of muscle tissues in vitro by differentiation and maturation of muscle precursor cells on a platform which provides an environment that facilitates the myogenic differentiation of the seeded cells. METHODS: Poly lactic-co-glycolic acid (PLGA) 3D printed scaffolds, which simulate the highly complex structure of extracellular matrix (ECM), were fabricated by E-jet 3D printing in this study. The scaffolds were used as platforms, providing environment that aids in growth, differentiation and other properties of C2C12 myoblast cells. RESULTS: The C2C12 myoblast cells grown on the PLGA 3D printed platforms had enhanced cell adhesion and proliferation. Moreover, the platforms were able to induce myogenic differentiation of the myoblast cells by promoting the formation of myotubes and up-regulating the expressions of myogenic genes (MyHC and MyOG). CONCLUSION: The fabricated 3D printed platforms have excellent biocompatibility, thereby can potentially be used as functional cell culture platforms in skeletal tissue engineering and regeneration.

In Vitro Study of Colon Cancer Cell Migration Using E-Jet 3D Printed Cell Culture Platforms.

The development of accurate and predictive in vitro experimental models of human tumors consistent with in vivo tumor microenvironments has garnered great attention in modern cancer research. 3D scaffolds are fabricated in this study by E-jet 3D printing with the aim of replicating the functionalities of tumor microenvironments in vitro which could be applicable as screening platforms for novel therapeutic strategies. Tumor protein 53 (p53) plays an important role in penetration and migration in 2D cell culture. However, whether or not p53 has the same function in 3D cell culture and the underlying mechanisms are poorly understood. Results show that p53 deletion significantly decreases the speed of migration and proliferation of cancer cells within 3D environments. This study unveils aspects of cancer cell motility and migration and the steps involved in subsequent cancer metastases, which provides a new perspective and platform for the research of tumor metastasis therapy.

Triple-Layer Vascular Grafts Fabricated by Combined E-Jet 3D Printing and Electrospinning.

Small-diameter tissue-engineered vascular grafts are urgently needed for clinic arterial substitute. To simulate the structures and functions of natural blood vessels, we designed a novel triple-layer poly(ε-caprolactone) (PCL) fibrous vascular graft by combining E-jet 3D printing and electrospinning techniques. The resultant vascular graft consisted of an interior layer comprising 3D-printed highly aligned strong fibers, a middle layer made by electrospun densely fibers, and an exterior structure composed of mixed fibers fabricated by co-electrospraying. The biocompatible triple-layer graft was used for in vivo implantation, and results demonstrated that the longitudinally-aligned fibers within the lumen of the graft could enhance the proliferation and migration of endothelial cells, while maintained good mechanical properties. The exterior layer provided a pathway that encouraged cells to migrate into the scaffold after implantation. This experimental graft overcame the limitations of conventionally electrospun vascular grafts of inadequate porosity and lowly cell penetration. The unique structure of the triple-layer vascular graft promoted cell growth and infiltration in vivo, thus provided an encouraging substitute for in situ tissue engineering.

An effective thermal therapy against cancer using an E-jet 3D-printing method to prepare implantable magnetocaloric mats.

Magnetic hyperthermia has been rapidly developed as a potential cancer treatment in recent years. Artificially induced hyperthermia close to a tumor can raise the temperature to 45°C causing tumor cell death. Herein, we introduce a novel method for rapid preparation of anti-cancer magnetocaloric PCL/Fe3 O4 mats capable of high-performance hyperthermia using E-jet 3D printing technology. Our 3D printed mats not only maintained the heating efficiency of traditional techniques for magnetic hyperthermia but also prolonged the effective therapy in vivo. When Fe3 O4 nanoparticles (NPs) were used in mats at a concentration of 6 mmol/L, 0.07 g PCL/Fe3 O4 mats were able to increase the temperature peripherally to 45°C under an alternating magnetic field (AMF) within 45 min. Moreover, the reproducibility experiment indicated that the maximum temperature was achieved following repeated heating and cooling cycles. Cell toxicity tests showed a high cell death rate during one treatment cycle. In vivo experiments indicated clear signs of tumor growth inhibitory and prolonged survival time of tumor-bearing mice after 4 weeks of treatment. The present magnetic mats may be a potential candidate for a novel heat-generating substrate for localized hyperthermia cancer therapy. Furthermore, the main advantage of such implantable magnetic mats is the local and precise delivery of Fe3 O4 NPs, ideal for the hyperthermia treatment of easily accessible tumors. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1827-1841, 2018.

Control of cell proliferation in E-jet 3D-printed scaffolds for tissue engineering applications: the influence of the cell alignment angle.

The ideal 3D scaffold for biological applications has not yet been designed. Our aim is to better match the scaffold performance through fine control of the fabrication process. Here, we applied electro-hydrodynamic jet (E-jet) 3D printing technology using poly-(lactic-co-glycolic acid) (PLGA) solution to construct scaffolds for tissue engineering applications. We fabricated different scaffolds of 1 : 1, 1 : 2 and 1 : 3 aspect ratios and tested the biological compatibility of the 2D and 3D printed scaffolds with fibroblasts. The scaffolds were used to culture fibroblasts, the main cellular components of loose connective tissue. The results show that the E-jet printed scaffolds could guide and improve cell growth. These scaffolds were able to support cellular alignment and proliferation. The cell angle was consistent with the longitudinal direction of the scaffolds, potentially enhancing the wound healing performance. Thus, the potential of this flexible technology for the 3D printing of scaffolds for the engineering of tissues is extensive.