RESUMO
Vegetables and legume soups contain various essential and bioactive constituents such as vitamin C, carotenoids, and phenolics. Antioxidant activity characteristics related to those compounds are well known to contribute profusely to human health. The cooking technique affects the bioavailability of nutrients and bioactive compounds, making it crucial to explore optimal alternatives to maximize them. The objective of this study was to explore the influence of different cooking techniques (boiling, pressure cooking, sous-vide, and cook-vide) on the physicochemical properties and bioactive characteristics of a ready-to-eat vegetable lentil soup. For this, the bioaccessibility of those compounds was assessed through an in vitro simulated gastrointestinal methodology. The firmness of vegetables was established to define treatments' cooking times, allowing subsequent comparison of the nutritional and functional properties of the soups. The color of vegetables was also evaluated as a quality parameter, which contributed to providing a global vision of the process impact. The results revealed that in vitro digestion (IVD) caused a decrease in all bioactive compound determinations for all cooking treatments of up to 72% for total phenols, 92% for lycopene, 98% for carotenoids, and 100% for vitamin C. Additionally, the antioxidant activity of the soups after thermal treatment improved up to 46% measured by the DPPH method. This study emphasizes the importance of considering the digestion process in the selection of the most adequate cooking technique. After IVD, traditional cooking (boiling) reached the maximum total carotenoid and lycopene contents; cook-vide and pressure-cooking techniques provided the highest total phenol content, showing these three techniques to have the maximum antioxidant capacity.
RESUMO
A growing interest in healthy diets has increased demand for fish and seafood, with aquaculture playing a crucial role in meeting this need. Developing new aquaculture products can enhance their commercial value and address consumer demand, but it is unclear which products will be well-received. This study aimed to generate ideas for new products derived from sea bream and prawns, and to gather consumer opinions on these ideas, segmented by gender and age. Two methodologies were used: focus groups and Check-All-That-Apply (CATA). In the focus groups, with two sessions per species and 10 participants each, ideas for aquaculture products were generated and categorized as fresh, dehydrated, fermented, marinated, and canned. The CATA technique, applied to 387 individuals, assessed the acceptability of fresh species, yielding average scores of 6.6 for sea bream and 6.8 for prawns. Sea bream was associated with products like fillets and long-shelf-life loins, while prawns were linked to snacks and toppings. In conclusion, the use of tools like focus groups has shown promising results for developing new aquaculture products. CATA analysis indicated that sea bream should be minimally processed with a long shelf life, and prawns should be processed into dehydrated products. Women preferred traditional products, while men favoured innovative options.
RESUMO
A growing market for seaweed products has emerged in the last 20 years, with microalgae and their extracts representing a source of high-value chemicals. In this study, antioxidative and anti-inflammatory activities of lipid fraction extract from Chlorella vulgaris (Chlorella) and Arthrospira platensis (Spirulina) on Normal Human Dermal Fibroblasts (NHDF cells) were evaluated. Treatments with Chlorella and Spirulina lipid extracts in NHDF cells at 0.1, 0.5, and 1% significantly protect UVA-induced damage by decreasing oxidative stress in the form of reactive oxygen species (ROS) but do not display any significant protection from HEV-induced damage. Chlorella or Spirulina lipid extracts at 0.1 and 0.5% display significant anti-inflammatory effects by inhibiting the 2-propanol-induced IL-6 expression on NHDF cells in vitro but showed no decrease in TNF-α expression. Chlorella and Spirulina lipid extracts present antioxidant and anti-inflammatory activity on NHDF cells.
RESUMO
The demand for gluten-free products has increased due to improved diagnoses and awareness of gluten-related issues. This study investigated the effect of HPMC, psyllium, and xanthan gum in gluten-free bread formulations. Three tests were conducted, varying the amount of these ingredients: in the first formulation, the amount of HPMC was increased to 4.4 g/100 g of flour and starch; in the second, psyllium husk fiber was increased to 13.2 g/100 g of flour and starch; and in the third formulation, xanthan gum was removed. Differences were observed among the formulations: increasing HPMC reduced extrusion force without affecting bread quality; adding psyllium increased dough elasticity but also crumb gumminess and crust hardness. Eliminating xanthan gum altered dough rheology, resulting in a softer and less gummy crumb, and a less reddish color in the final bread.
RESUMO
Andean roots can be used as an alternative to gluten-free food. The objective of this study was to enhance the technological and nutritional properties of Andean root flours to promote their industrial applicability. The water content and activity of the flour were lower than those required to prevent mold growth. The bulk density of the flour was comparable to that of wheat flour. The flour of Ipomoea batatas (L.) Lam. exhibited the lowest water absorption capacity of the tested samples. However, both this flour and Tropaeolum tuberosum Ruiz & Pavón showed a higher fat absorption capacity. The samples exhibited type-II isotherms, indicating that the flours were highly hygroscopic. The Guggenheim, Anderson, and de Boer GAB model showed a higher coefficient of determination in mathematical modeling. The chroma of T. tuberosum Ruiz & Pavón flour was higher than the other samples, which was related to total carotenoids and lycopene. Furthermore, I. batatas (L.) Lam. exhibited the highest phenol value.
RESUMO
This study aimed to investigate the effect of ancient wheat flour type and sourdough fermentation time on the nutritional, textural and sensorial properties of fiber-rich sourdough bread. The proximate composition, minerals, carbohydrates, organic acids, volatiles, total phenolic content, simulated gastrointestinal digestion, textural and sensorial characteristics were investigated. Bread's minerals, total phenolics, cellulose contents and radical scavenging activity variations clearly indicates an increasing trend with sourdoughs fermentation time. Compared to maltose and glucose, fructose was predominant in all bread samples. Sourdough fermentation time and wheat type had non-significant influence on fructose content from digested fraction. Excepting emmer bread, fermentation time increased in vitro digestibility values for tested samples. The crumb textural parameters (hardness, gumminess, chewiness, cohesiveness and springiness index) were positively influenced by fermentation time. The specific clustering of the analysed characteristics distinguished emmer bread from other samples in terms of volatile compounds, textural and overall acceptability, being preferred by panellists.
RESUMO
The combination of printing parameters appropriately improves the printability of 3D-printed foods. In this regard, the present study aims to evaluate the effect of 3D printing process parameters on protein food generation. Printability of a cylinder 3 cm in diameter and 1 cm in height using a protein mixture of rice water and xanthan gum with a ratio of 30:70:0.5 was evaluated in an extrusion printer with an XYZ system. A ½ fractional factorial design was used with three factors: nozzle diameter (1.2 - 2.2 mm), layer height (1.0 - 2.0 mm), and print speed (20 - 50 mm/s). Each combination of factor levels was performed in triplicate for 12 runs plus three central points. Print time (min), sample weight, change in diameter (%), change in height (%), change in volume (%), mass flow rate (mg/s), appreciation (qualitative variable), and textural and rheology characters were obtained as response variables. The linear effects of the factors and combination factors were evaluated by analysis of variance. Additionally, a principal component analysis was performed to visualize the similarity between the observations and the relationship between the variables. The results showed that the layer height and nozzle diameter affect the printing accuracy concerning surface quality, shape stability, resolution, and layer layout. The nozzle with a diameter of 1.7 mm combined with speeds between 35 and 50 mm/s allowed the effects of overextrusion to be overcome, generating a better flow of the material. Low scores in the printability variable were related to low-speed values (20 mm/s) and a high nozzle diameter (2.2 mm), which generated higher deformations in the printed protein cylinder. Additionally, some printing conditions affected the textural and rheological characteristics, which allowed inferring that the capacity of the protein mass to store and recover energy in compression processes is conditioned by the printing parameters.
Assuntos
Oryza , Impressão Tridimensional , AlimentosRESUMO
The beneficial health effects of prebiotics have been demonstrated in numerous research papers. However, their incorporation into daily food remains unfamiliar to consumers. This work evaluates the effects of the addition of resistant maltodextrin (RMD) on the sensory attributes of pasteurised orange juice, together with the physico-chemical properties and the aromatic profile. RMD addition increased the sweetness and decreased the acidity and bitterness, resulting in a higher overall panellists' rating of orange juice. It also proportionally increased °Brix together with density and decreased acidity. Colour changes were registered with higher RMD concentrations. Orange pulp presence affected the volume particle size distribution analysis, while RMD addition did not have any effect. The aroma volatile compounds were also analysed. Pulp-added samples showed a higher quantity of alcohol and aldehydes, whereas pulp-free samples registered higher terpene and terpenoid values. Ketones and acids were also quantified. RMD had a moderate impact on volatile compound quantifications, with the orange pulp presence playing a much more decisive role. A correspondence analysis was also performed to relate instrumental and sensory determinations for all samples. This work proves that the addition of RMD to orange juice is technologically feasible while also achieving a good response at the sensory level.
RESUMO
Three-dimensional food printing is one of the modern techniques for food customization. The difficulty of this technique lies in the formulation of new matrices. These new formulations must have good extrusion characteristics and, at the same time, maintain the structure once printed. These qualities are related to textural and rheological properties. Printability studies are those whose objective is to know the above properties. Some authors have correlated printability with rheological and physicochemical parameters. The aim of this study was to characterize three gels to test prediction models and to determine the most important rheological and textural parameters (G', Gâ³, Tanδ, maxF, average) in printability. The formulations studied were bovine gelatin (4%) with kappa-carrageenan (0.5%) (Gb + K), porcine gelatin (5%) plus iota-carrageenan (2%) (Gp + I), and methylcellulose (4%) (MC). The samples were characterized by an oscillatory test for the rheological properties and an extrusion test for the textural properties. In addition, the density was obtained to apply the predictive models and correlate the rheological and textural parameters to determine their influence. Gp + I and Gb + K showed higher values of maximum force in the extrusion test than MC, but MC had less deviation in the mean force during the test. All the samples showed a predominantly elastic behavior and damping factor (Tanδ) between 0.14 (Gb + K) and 0.37 (MC). It was observed that the tangent of the phase angle (Tanδ) had a large positive influence on the maximum and average force studied in the extrusion tests. The sample results did not match 100% with the predictions made from the models. It was possible to print samples that were higher in height without obtaining deformations over time of more than 5%. Further work is needed to optimize models and parameters for more accurate prediction.
RESUMO
Concern about food waste has become a major global concern. The waste generated by the agri-food industry poses an environmental challenge. However, the development of 3D printing technology offers an opportunity to address this problem. By incorporating food waste into inks, it can create personalized food tailored to individual needs. The aim of this study is the valorization of orange by-products (OBP) in 3D printed gels to obtain a final product in the form of a fiber-enriched snack. Gelatin gels were printed with different concentrations of apricot pulp (30, 50, and 70%) and OBP was added. These gels were subjected to a freeze-drying process. The rheology of the gels before and after printing, the printing precision, and the post-treatment of the freeze-dried product, including color, shear force, and the presence of bioactive compounds, were evaluated. The addition of OBP resulted in an increase in the elasticity (997-1242u) of the samples and improved the printability of them. However, an increase in the hardness (173-184u) was observed in the freeze-dried samples. The use of OBP not only improves the printability of the gels but also enables obtaining fiber-enriched snacks, which could contribute to the reduction in food waste and the promotion of healthy and sustainable food.
RESUMO
The purpose of this study was to obtain a functional, stable powder product from Cucumis melo subsp. melo Var. flexuosus (L.) to promote its consumption and reduce waste and production losses. The melons were ground and freeze-dried with or without biopolymers (pea protein (PPSM) or pea fibre (PFSM)). The physicochemical, structural, and functional properties of the powder were studied. The water content, water activity, bulk density, porosity, Hausner ratio, Carr index, hygroscopicity, water solubility, water absorption index, particle size, colour, and microstructure of the powder were determined. In addition, vitamin C, folates, chlorophyll a, total phenols and carotenoids, antioxidant capacity, and powder encapsulation efficiency were analysed. Snake melon (SM) powders contained vitamin C, folates, carotenoids, chlorophyll a, and phenols, which contributed to their antioxidant capacity. The incorporation of PP or PF in the formulation before lyophilisation generated stable encapsulates that protected the bioactive compounds. PPSM and PFSM were less hygroscopic and more free-flowing and had lower water content and water activity compared to the SM. PFSM showed higher encapsulation efficiency and smaller particles with a smooth surface and oval shape.
RESUMO
Andean tubers and tuberous roots have nutritional and medicinal properties transferred through ancestral generations. In this study, we aim to promote cultivation and consumption by developing a snack based on these crops. Corn grits were thoroughly mixed with sweet potato, mashua, and three varieties of oca flour (white, yellow, and red) in an 80:20 ratio, and a single-screw laboratory extruder was utilized to produce third-generation (3G) dried pellets. Microwave expansion was studied, and the dried 3G pellets and expanded snacks were characterized. The microwave expansion curves of the dried 3G pellets were adjusted to the Page, logarithmic, and Midilli-Kucuk models. During the characterization, the influence of the raw material composition was observed in sectional expansion, water content, water activity, water absorption, water solubility, swelling, optical and textural properties, and bioactive compounds. According to global color variation (mixture vs. expanded and dried vs. expanded) and bioactive compound analysis, the mashua suffered little chemical change or nutritional loss during the process. The extrusion process was shown to be an ideal method for manufacturing snacks from Andean tuber flours.
RESUMO
Much attention has been paid to the health benefits of including fruits and vegetables in the diet. However, for the compounds responsible for this beneficial effect to be effective at the level of the human organism, they must be available for absorption after digestion. In this sense, in vivo studies are needed to demonstrate the bioavailability of these compounds and their physiological activity. In order to provide information in this regard, this study collects data on the levels of vitamin C (VC) and naringenin (NAG) in the blood serum of the 11 volunteer participants in this trial, before and after consuming two different grapefruit juices. The juices were prepared by rehydrating the grapefruit powder obtained by freeze-drying (FD) the fruit puree or by spray-drying (SD) the liquefied grapefruit. No significant differences (p > 0.05) neither by juice nor by participant were observed in any case. The mean relative increase of VC, NAG and the radical scavenging ability (RSA) in blood serum due to grapefruit juices intake was 12%, 28% and 26%, respectively. Just VC showed a positive and significant Pearson's correlation with RSA. The mean bioavailability of VC was quantified as 1.529 ± 0.002 mg VC/L serum per 100 mg of VC ingested.
Assuntos
Citrus paradisi , Humanos , Ácido Ascórbico/análise , Bebidas/análise , Disponibilidade Biológica , Flavonoides/análise , Sucos de Frutas e Vegetais , VitaminasRESUMO
The process of 3D food printing is a rapidly growing field that involves the use of specialized 3D printers to produce food items with complex shapes and textures. This technology allows the creation of customized, nutritionally balanced meals on demand. The objective of this study was to evaluate the effect of apricot pulp content on printability. Additionally, the degradation of bioactive compounds of gels before and after printing was evaluated to analyze the effect of the process. For this proposal, physicochemical properties, extrudability, rheology, image analysis, Texture Profile Analysis (TPA), and bioactive compounds content were evaluated. The rheological parameters lead to higher mechanical strength and, thus, a decrease in elastic behavior before and after 3D printing as the pulp content increases. An increase in strength was observed when the pulp content increased; thus, sample gels with 70% apricot pulp were more rigid and presented better buildability (were more stable in their dimensions). On the other hand, a significant (p < 0.05) degradation of total carotenoid content after printing was observed in all samples. From the results obtained, it can be said that the gel with 70% apricot pulp food ink was the best sample in terms of printability and stability.
RESUMO
There is currently a growing trend towards the consumption of vegetable protein, even if it shows some deficiencies in essential amino acids. It has been driven by consumer passion for health and wellness, environmental sustainability, animal welfare and the flexitarian lifestyle. However, the formulation of plant protein food analogues to meat products is complicated by the technological properties of isolated plant protein. One of the processes used to improve these properties is the texturisation of the protein by extrusion, as well as the use of other plant materials that can enrich the formulation. Therefore, the aim of this study was to evaluate the effect of pea protein (PP) enriched with lucerne (L), spinach (S) and Chlorella (C) in powdered and texturised forms on the physicochemical properties and extrusion parameters, and to evaluate its technological and sensory quality as a meat analogue in vegetal hamburgers. Texturisation reduced the number of soluble components released, thus reducing the molecular degradation in extruded material. The texturised samples were significantly (p < 0.05) less hygroscopic than the non-textured samples. Once the properties of the powder and texturised had been analysed, they were used to prepare vegetal hamburgers. The addition of vegetable-enriched texturised samples with high chlorophyll content led to more intense colour changes in the vegetal hamburgers during cooking, with PP+C providing the darkest colouring, and also resulted in a final product more similar to a traditional meat hamburger, with higher overall and meat odour/flavour intensity, hardness, juiciness and chewiness, and less legume and spice odour and flavour. Overall, texturisation improved the technological properties of the enriched protein isolate, allowing for more efficient production of vegetal hamburgers.
RESUMO
Legumes are a good source of vegetal protein that improves diets worldwide. Cowpea has been used as fortification agents in some traditional corn foods in developing countries such as Colombia. The work aimed to evaluate the physicochemical properties of extruded mixtures of corn and cowpea flours to assess the use of these mixes as vegetable protein ingredients. Corn flour was mixed with 15, 30, and 50% of cowpea flour and extruded for this proposal. After extrusion, mixtures were ground to produce a powder. Techno-functional properties of powders as water content, hygroscopicity, water absorption, fat absorption, water solubility index, swelling index, bulk density, Hausner ratio, Carr index, and porosity were evaluated in the mixtures, extrudates, and obtained powders to assess the effect of the addition of cowpea on these properties. Results showed that processing powder obtained by extrusion and drying could be used as a powder to regenerate with water as a source of protein. Moreover, storing processing samples in sections (pellet format) is convenient to avoid wetting since this format is less hygroscopic and the same mass occupies less storage volume than powders.
RESUMO
Beetroot (Beta vulgaris L.) is an important root vegetable crop and a valuable food source of micronutrients and bioactive constituents. In this study, the bioaccessibility of minerals, organic acids, and betacyanins in beetroot powder during simulated gastrointestinal digestion was investigated, as well as the antioxidant activity of the final fractions of each phase of the process. Mineral elements were analyzed by inductively coupled plasma optical emission spectroscopy (ICP-OES), organic acids by ultra-fast liquid chromatography with photodiode array detection (UFLC-PDA), and betacyanins by liquid chromatography with diode-array detection and mass spectrometry (HPLC-DAD-ESI/MSn). The oxidative hemolysis inhibition assay was used to assess the ex vivo antioxidant activity. The bioaccessibility of minerals at the end of gastrointestinal digestion ranged from 43 to 65%, depending on the mineral element. Among these, Mg was the most bioaccessible, while Ca and Fe had the lowest bioaccessibility. For organic acids, a major release during digestion was observed for quinic acid. It was also found that betanin (the major betalain in beetroot) was highly unstable during the digestion process, probably due to its hydrophilic nature, which agreed with the significant (p < 0.05) decrease in antioxidant/antihemolytic activity. These results suggest that beetroot antioxidant compounds are unstable under gastrointestinal conditions, and could be useful for future development of novel and more stable beetroot food formulations.
RESUMO
Food waste is becoming a growing and important concern at both local and global levels. One-third of all food production is lost or wasted globally. It is necessary to look for alternatives that allow the use of agri-food waste or byproducts and that can provide value to other foodstuffs. The utilization of beetroot byproducts for producing value-added third generation (3G) snacks was the main aim of this work. These snacks are obtained by indirect expansion by extrusion and later heat expansion. In order to achieve this aim, a corn grits base was used and the influence of water content and beetroot byproduct content effect was studied on expansion kinetics by microwave energy and on texture, colour, extrusion parameters and bioactive compounds of expanded 3G snacks. The microwave expansion kinetics study determined the appropriate time to expand the formulations studied. Samples with higher water content in the mixtures needed more expansion time. In terms of expansion, all samples presented acceptable values; however, samples with 25% water in the mixtures showed better results. Furthermore, these snacks showed more crunchiness and less hardness. Beetroot byproduct incorporation provided additional functional value to the snacks. The betalains and phenols contained in the beetroot byproduct were presented in the expanded snacks and increased the antioxidant capacity of the snacks. With this study, it can be recommended to use 25% water content and 10% beetroot byproduct in corn mixture to obtain a third-generation snack with added value.
RESUMO
Andean roots, such as zanahoria blanca, achira, papa China, camote, oca, and mashua, contain high amounts of dietary fiber, vitamins, minerals, and fructo-oligosaccharides. This study aimed to demonstrate the possibility of obtaining healthy second-generation (2G) snacks (products obtained from the immediate expansion of the mixture at the exit of the extruder die) using these roots as raw materials. Corn grits were mixed with Andean root flour in a proportion of 80:20, and a Brabender laboratory extruder was used to obtain the 2G snacks. The addition of root flour increased the water content, water activity, sectional expansion index, hygroscopicity, bulk density, and water absorption index but decreased the porosity. However, all 2G snacks manufactured with Andean root flour showed better characteristics than did the control (made with corn grits) in texture (softer in the first bite and pleasant crispness) and optical properties (more intense and saturated colors). The developed snacks could be considered functional foods due to the high amount of carotenoids and phenolic compounds they exhibit after the addition of Andean root flours. The composition of raw roots, specifically the starch, fiber, and protein content, had the most impact on snack properties due to their gelatinization or denaturalization.
RESUMO
Brewers' spent grain (BSG), the main by-product of the brewing industry, is a rich source of minerals and water-soluble vitamins such as thiamine, pyridoxine, niacin, and cobalamin. Bioaccessibility through in vitro digestion is an important step toward the complete absorption of minerals and B group vitamins in the gastrointestinal system. Inductively coupled plasma optical emission spectrometry (ICP-OES) together with inductively coupled plasma quadrupole mass spectrometry (ICP-MS) was used for the quantification of the macro- and micro-minerals. An ultra-high performance liquid chromatography (UHPLC) system coupled with a diode array detector (DAD) was used for B group vitamin identification. Four different industrial BSG samples were used in the present study, with different percentages of malted cereals such as barley, wheat, and degermed corn. Calcium's bioaccessibility was higher in the BSG4 sample composed of 50% malted barley and 50% malted wheat (16.03%), while iron presented the highest bioaccessibility value in the BSG2 sample (30.03%) composed of 65% Pale Ale malt and 35% Vienna malt. On the other hand, vitamin B1 had the highest bioaccessibility value (72.45%) in the BSG3 sample, whilst B6 registered the lowest bioaccessibility value (16.47%) in the BSG2 sample. Therefore, measuring the bioaccessibilty of bioactive BSG compounds before their further use is crucial in assessing their bioavailability.