Effectiveness and safety of tocilizumab in patients with systemic sclerosis: a propensity score matched controlled observational study of the EUSTAR cohort.

OBJECTIVES: Tocilizumab showed trends for improving skin fibrosis and prevented progression of lung fibrosis in systemic sclerosis (SSc) in randomised controlled clinical trials. We aimed to assess safety and effectiveness of tocilizumab in a real-life setting using the European Scleroderma Trial and Research (EUSTAR) database. METHODS: Patients with SSc fulfilling the American College of Rheumatology (ACR)/EULAR 2013 classification criteria, with baseline and follow-up visits at 12±3 months, receiving tocilizumab or standard of care as the control group, were selected. Propensity score matching was applied. Primary endpoints were the modified Rodnan skin score (mRSS) and FVC at 12±3 months compared between the groups. Secondary endpoints were the percentage of progressive/regressive patients for skin and lung at 12±3 months. RESULTS: Ninety-three patients with SSc treated with tocilizumab and 3180 patients with SSc with standard of care fulfilled the inclusion criteria. Comparison between groups did not show significant differences, but favoured tocilizumab across all predefined primary and secondary endpoints: mRSS was lower in the tocilizumab group (difference -1.0, 95% CI -3.7 to 1.8, p=0.48). Similarly, FVC % predicted was higher in the tocilizumab group (difference 1.5 (-6.1 to 9.1), p=0.70). The percentage of progressive/regressive patients favoured tocilizumab over controls. These results were robust regarding the sensitivity analyses. Safety analysis confirmed previously reported adverse event profiles. CONCLUSION: Although this large, observational, controlled, real-life EUSTAR study did not show significant effectiveness of tocilizumab on skin and lung fibrosis, the consistency of direction of all predefined endpoints generates hypothesis for potential effectiveness in a broader SSc population.

Crust treatments to reduce bread staling.

Crust treatments, namely edible bread coatings, enzymatic crust modification and chemical crust modification, were introduced with the intention to minimize bread water loss during ambient storage. It was observed that compared to the treated bread, the untreated bread had significantly higher weight loss and crumb firmness after 14 days of ambient storage. A large array of materials was tested, among which hydrophobic coatings were shown to have the highest moisture barrier efficiency. In particular, the 20% candelilla wax coating (solution of 20% candelilla wax in sunflower oil), 20% beeswax coating (solution of 20% beeswax in sunflower oil) and HPMC oleogel coating (coating containing hydroxypropyl methyl cellulose oleogel) were proved to be most effective, thanks to their low affinity with water and low water vapor permeability. The application of the 20% candelilla wax coating resulted in reductions of the bread weight loss from about 30 to 13% and the crumb firmness from above 500 to 34 â€‹N after a storage period of 14 days. In addition, it was noted that the enzymatic and chemical crust modifications yielded moderately good results, but showed a significantly altered appearance of the bread crust.

Higher Salt Hydrophobicity Lengthens Ionic Wormlike Micelles and Stabilizes Them upon Heating.

Tuning the rheological properties of surfactant solutions by charge screening is a convenient formulation tool in cosmetic, household, oil recovery, drag-reduction, and thickening applications. Surfactants self-assemble in water, and upon charge screening and core shielding, they grow into long wormlike micelles (WLMs). These are valuable model systems for soft matter physics, and the most explored formulation is hexadecyl-trimethylammonium bromide (CTAB) and sodium salicylate (NaSal). Replacing NaSal with aromatic salts of altered hydrophobicity results in different penetration of the additive in the CTAB micellar core. This altered penetration depth will determine the anisotropic micellar growth that tailors the viscoelastic response. Sodium 4-methylsalicylate (mNaSal) is a higher hydrophobicity alternative to NaSal, requiring less additive to induce strong changes in the viscoelastic properties. Herein, we provide a comparative study of the mNaSal/CTAB system with the reference NaSal/CTAB over a range of temperatures and salt concentrations. The findings from the well-known NaSal/CTAB pair are transferred to the mNaSal/CTAB system, revealing the origins of the WLM solution's viscoelastic properties by discerning contributions from charge screening and micellar core shielding upon small differences in hydrophobicity.

Chia seed mucilage - a vegan thickener: isolation, tailoring viscoelasticity and rehydration.

Chia seeds and their mucilage gels provide a nutritionally and functionally promising ingredient for the food and pharmaceutical industry. Application and utilization of the gel remain limited due to the tightly adhesion of the mucilage to the seeds, which affects the organoleptic properties, control of concentration and structuring possibilities. To exploit the full potential of chia mucilage gels as a functional ingredient calls for separation and purification of the gel. Herein, the gel was extracted by centrifugation and characterized rheologically and microscopically to link the viscoelastic properties to the structural properties. Subsequently, the gel was dried employing three different methods for facilitated storage and prolonged shelf life. The dried gels were readily soluble and its viscoelastic properties were fully regenerated upon rehydration demonstrating its potential to envisage industrial applications. The viscoelastic chia mucilage demonstrated shear-thinning behavior with complete relaxation upon stress removal. The gel's elasticity was enhanced with increasing mucilage concentration resulting in a highly tunable system. The extractable and rehydratable functional chia gel is a viable candidate as additive for the development of products requiring specific viscoelastic properties. Addition of the gel enhances the nutritional profile without interfering with the organoleptic properties.

Targeted Inhibition of Enzymatic Browning in Wheat Pastry Dough.

Enzymatic browning primarily affects fruits and vegetables but also occurs in wheat-based food. Herein, the browning behavior in wheat pastry dough was investigated aiming toward a targeted inhibitory treatment without influencing the pastry dough properties such as workability or taste. Dough discoloration is attributed to several subsequent enzyme-substrate reactions, which can selectively be inhibited by food additives. In most cases, an effective and lasting inhibition is only guaranteed by compounds acting upon multiple inhibition pathways. Despite their effectiveness, the unlimited use of commercial inhibitors is nondesirable due to necessary labeling, thus sustainable and natural inhibitors usually occurring as conventional food ingredients are of interest. It is shown that white wine combined with lemon juice revealed itself as an ideal combination for prevention of enzymatic browning in pastry dough.

Modifying the Contact Angle of Anisotropic Cellulose Nanocrystals: Effect on Interfacial Rheology and Structure.

Cellulose nanocrystals (CNCs) are an emerging natural material with the ability to stabilize fluid/fluid interfaces. Native CNC is hydrophilic and does not change the interfacial tension of the stabilized emulsion or foam system. In this study, rodlike cellulose particles were isolated from hemp and chemically modified to alter their hydrophobicity, i.e., their surface activity, which was demonstrated by surface tension measurements of the particles at the air/water interface. The buildup and mechanical strength of the interfacial structure were investigated using interfacial shear and dilatational rheometry. In contrast to most particle or protein-based interfacial adsorption layers, we observe in shear flow a Maxwellian behavior instead of a glasslike frequency response. The slow and reversible buildup of the layer and its unique frequency dependence indicate a weakly aggregated system, which depends on the hydrophobicity and, thus, on the contact angle of the CNC particles at the air/water interface. Exposed to dilatational flow, the weakly aggregated particles cluster and form compact structures. The interfacial structure generated by the different flow fields is characterized by the contact angle, immersion depth, and layer roughness obtained by neutron reflectometry with contrast variation while the size and local structural arrangement of the CNC particles were investigated by AFM imaging.

Effect of Oil Hydrophobicity on the Adsorption and Rheology of ß-Lactoglobulin at Oil-Water Interfaces.

The adsorption of protein layers at oil-water interfaces is critical to the formation and stability of various emulsions in, for example, technical applications as well as in biological lipid storage. Effects of ionic strength, pH, temperature, and pretreatments of the proteins are well-known. However, the oil phase has been regarded as exchangeable and its role in protein adsorption has been widely ignored. Herein, the influence of systematically selected oil interfaces of high purity on the formation and properties of ß-lactoglobulin (ß-lg) adsorption layers was evaluated. Droplet profile tensiometry and interfacial rheometry were employed to determine the adsorption kinetics and dilatational and interfacial shear moduli. We show that depending on the molecular size, flexibility, hydrophobicity, polarity, and polarizability of the oils, globular proteins adsorb distinctively. Stronger interactions of polar oils with the hydrophilic exterior of the native ß-lg lead to decelerated protein unfolding. This results in lower surface pressures and slower formation of viscoelastic networks. In addition, polar oils interact stronger with the protein network by hydrophilic bonding and thereby act as softening agents. The observed effects of hydrophobic subphases on the adsorbed protein layers provide knowledge, which promotes higher reproducibility in rheological studies and precise tailoring of interfacial films for enhanced formation and stability of emulsions.

Development of Smart Optical Gels with Highly Magnetically Responsive Bicelles.

Hydrogels delivering on-demand tailorable optical properties are formidable smart materials with promising perspectives in numerous fields, including the development of modern sensors and switches, the essential quality criterion being a defined and readily measured response to environmental changes. Lanthanide ion (Ln3+)-chelating bicelles are interesting building blocks for such materials because of their magnetic responsive nature. Imbedding these phospholipid-based nanodiscs in a magnetically aligned state in gelatin permits an orientation-dependent retardation of polarized light. The resulting tailorable anisotropy gives the gel a well-defined optical signature observed as a birefringence signal. These phenomena were only reported for a single bicelle-gelatin pair and required high magnetic field strengths of 8 T. Herein, we demonstrate the versatility and enhance the viability of this technology with a new generation of aminocholesterol (Chol-NH2)-doped bicelles imbedded in two different types of gelatin. The highly magnetically responsive nature of the bicelles allowed to gel the anisotropy at commercially viable magnetic field strengths between 1 and 3 T. Thermoreversible gels with a unique optical signature were generated by exposing the system to various temperature conditions and external magnetic field strengths. The resulting optical properties were a signature of the gel's environmental history, effectively acting as a sensor. Solutions containing the bicelles simultaneously aligning parallel and perpendicular to the magnetic field directions were obtained by mixing samples chelating Tm3+ and Dy3+. These systems were successfully gelled, providing a material with two distinct temperature-dependent optical characteristics. The high degree of tunability in the magnetic response of the bicelles enables encryption of the gel's optical properties. The proposed gels are viable candidates for temperature tracking of sensitive goods and provide numerous perspectives for future development of tomorrow's smart materials and technologies.

Fabrication Procedures and Birefringence Measurements for Designing Magnetically Responsive Lanthanide Ion Chelating Phospholipid Assemblies.

Bicelles are tunable disk-like polymolecular assemblies formed from a large variety of lipid mixtures. Applications range from membrane protein structural studies by nuclear magnetic resonance (NMR) to nanotechnological developments including the formation of optically active and magnetically switchable gels. Such technologies require high control of the assembly size, magnetic response and thermal resistance. Mixtures of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and its lanthanide ion (Ln3+) chelating phospholipid conjugate, 1,2-dimyristoyl-sn-glycero-3-phospho-ethanolamine-diethylene triaminepentaacetate (DMPE-DTPA), assemble into highly magnetically responsive assemblies such as DMPC/DMPE-DTPA/Ln3+ (molar ratio 4:1:1) bicelles. Introduction of cholesterol (Chol-OH) and steroid derivatives in the bilayer results in another set of assemblies offering unique physico-chemical properties. For a given lipid composition, the magnetic alignability is proportional to the bicelle size. The complexation of Ln3+ results in unprecedented magnetic responses in terms of both magnitude and alignment direction. The thermo-reversible collapse of the disk-like structures into vesicles upon heating allows tailoring of the assemblies' dimensions by extrusion through membrane filters with defined pore sizes. The magnetically alignable bicelles are regenerated by cooling to 5 °C, resulting in assembly dimensions defined by the vesicle precursors. Herein, this fabrication procedure is explained and the magnetic alignability of the assemblies is quantified by birefringence measurements under a 5.5 T magnetic field. The birefringence signal, originating from the phospholipid bilayer, further enables monitoring of polymolecular changes occurring in the bilayer. This simple technique is complementary to NMR experiments that are commonly employed to characterize bicelles.

Understanding the Enhanced Magnetic Response of Aminocholesterol Doped Lanthanide-Ion-Chelating Phospholipid Bicelles.

Cholesterol (Chol-OH) and its conjugates are powerful molecules for engineering the physicochemical and magnetic properties of phospholipid bilayers in bicelles. Introduction of aminocholesterol (3ß-amino-5-cholestene, Chol-NH2) in bicelles composed of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and the thulium-ion-chelating phospholipid 1,2-dimyristoyl-sn-glycero-3-phospho-ethanolamine-diethylene triaminepentaacetate (DMPE-DTPA/Tm3+) results in unprecedented high magnetic alignments by selectively tuning the magnetic susceptibility Δχ of the bilayer. However, little is known on the underlying mechanisms behind the magnetic response and, more generally, on the physicochemical forces governing a Chol-NH2 doped DMPC bilayer. We tackled this shortcoming with a multiscale bottom-up comparative investigation of Chol-OH and Chol-NH2 mixed with DMPC. First, simplified monolayer models on a Langmuir trough were employed to compare the two steroid molecules at various contents in DMPC. In a second step, a molecular dynamics (MD) simulation allowed for a more representative model of the bicelle bilayer while monitoring the amphiphiles and their interactions on the molecular level. In a final step, we moved away from the models and investigated the effect of temperature on the structure and magnetic alignment of Chol-NH2 doped bicelles by SANS. The DMPC/steroid monolayer studies showed that Chol-OH induces a larger condensation effect than Chol-NH2 at steroid contents of 16 and 20 mol %. However, this tendency was inversed at steroid contents of 10, 30, and 40 mol %. Although the MD simulation with 16 mol % steroid revealed that both compounds induce a liquid-ordered state in DMPC, the bilayer containing Chol-NH2 was much less ordered than the analogous system containing Chol-OH. Chol-NH2 underwent significantly more hydrogen bonding interactions with neighboring DMPC lipids than Chol-OH. It seems that, by altering the dynamics of the hydrophilic environment of the bicelle, Chol-NH2 changes the crystal field and angle of the phospholipid-lanthanide DMPE-DTPA/Tm3+ complex. These parameters largely determine the magnetic susceptibility Δχ of the complex, explaining the SANS results, which show significant differences in magnetic alignment of the steroid doped bicelles. Highly magnetically alignable DMPC/Chol-NH2/DMPE-DTPA/Tm3+ (molar ratio 16:4:5:5) bicelles were achieved up to temperatures of 35 °C before a thermoreversible rearrangement into nonalignable vesicles occurred. The results confirm the potential of Chol-NH2 doped bicelles to act as building blocks for the development of the magnetically responsive soft materials of tomorrow.

Ionic micelles and aromatic additives: a closer look at the molecular packing parameter.

Wormlike micellar aggregates formed from the mixture of ionic surfactants with aromatic additives result in solutions with impressive viscoelastic properties. These properties are of high interest for numerous industrial applications and are often used as model systems for soft matter physics. However, robust and simple models for tailoring the viscoelastic response of the solution based on the molecular structure of the employed additive are required to fully exploit the potential of these systems. We address this shortcoming with a modified packing parameter based model, considering the additive-surfactant pair. The role of charge neutralization on anisotropic micellar growth was investigated with derivatives of sodium salicylate. The impact of the additives on the morphology of the micellar aggregates is explained from the molecular level to the macroscopic viscoelasticity. Changes in the micelle's volume, headgroup area and additive structure are explored to redefine the packing parameter. Uncharged additives penetrated deeper into the hydrophobic region of the micelle, whilst charged additives remained trapped in the polar region, as revealed by a combination of 1H-NMR, SAXS and rheological measurements. A deeper penetration of the additives densified the hydrophobic core of the micelle and induced anisotropic growth by increasing the effective volume of the additive-surfactant pair. This phenomenon largely influenced the viscosity of the solutions. Partially penetrating additives reduced the electrostatic repulsions between surfactant headgroups and neighboring micelles. The resulting increased network density governed the elasticity of the solutions. Considering a packing parameter composed of the additive-surfactant pair proved to be a facile means of engineering the viscoelastic response of surfactant solutions. The self-assembly of the wormlike micellar aggregates could be tailored to desired morphologies resulting in a specific and predictable rheological response.

Molecular engineering of lanthanide ion chelating phospholipids generating assemblies with a switched magnetic susceptibility.

Lanthanide ion (Ln3+) chelating amphiphiles are powerful molecules for tailoring the magnetic response of polymolecular assemblies. Mixtures of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-dimyristoyl-sn-glycero-3-phospho-ethanolamine-diethylene triaminepentaacetate (DMPE-DTPA) complexed to Ln3+ deliver highly magnetically responsive bicelles. Their magnetic properties are readily tuned by changing the bicellar size or the magnetic susceptibility Δχ of the bilayer lipids. The former technique is intrinsically bound to the region of the phase diagram guarantying the formation of bicelles. Methods aiming towards manipulating the Δχ of the bilayer are comparatively more robust, flexible and lacking. Herein, we synthesized a new Ln3+ chelating phospholipid using glutamic acid as a backbone: DMPE-Glu-DTPA. The chelate polyhedron was specifically engineered to alter the Δχ, whilst remaining geometrically similar to DMPE-DTPA. Planar asymmetric assemblies hundreds of nanometers in size were achieved presenting unprecedented magnetic alignments. The DMPE-Glu-DTPA/Ln3+ complex switched the Δχ, achieving perpendicular alignment of assemblies containing Dy3+ and parallel alignment of those containing Tm3+. Moreover, samples with chelated Yb3+ were more alignable than the Tm3+ chelating counterparts. Such a possibility has never been demonstrated for planar Ln3+ chelating polymolecular assemblies. The physico-chemical properties of these novel assemblies were further studied by monitoring the alignment behavior at different temperatures and by including 16 mol% of cholesterol (Chol-OH) in the phospholipid bilayer. The DMPE-Glu-DTPA/Ln3+ complex and the resulting assemblies are promising candidates for applications in numerous fields including pharmaceutical technologies, structural characterization of membrane biomolecules by NMR spectroscopy, as contrasting agents for magnetic resonance imaging, and for the development of smart optical gels.

Methods for Generating Highly Magnetically Responsive Lanthanide-Chelating Phospholipid Polymolecular Assemblies.

Mixtures of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and its lanthanide ion (Ln3+) chelating phospholipid conjugate, 1,2-dimyristoyl-sn-glycero-3-phospho-ethanolamine-diethylene triaminepentaacetate (DMPE-DTPA), assemble into highly magnetically responsive polymolecular assemblies such as DMPC/DMPE-DTPA/Ln3+ (molar ratio 4:1:1) bicelles. Their geometry and magnetic alignability is enhanced by introducing cholesterol into the bilayer in DMPC/Cholesterol/DMPE-DTPA/Ln3+ (molar ratio 16:4:5:5). However, the reported fabrication procedures remain tedious and limit the generation of highly magnetically alignable species. Herein, a simplified procedure where freeze thawing cycles and extrusion are replaced by gentle heating and cooling cycles for the hydration of the dry lipid film was developed. Heating above the phase transition temperature Tm of the lipids composing the bilayer before cooling back below the Tm was essential to guarantee successful formation of the polymolecular assemblies composed of DMPC/DMPE-DTPA/Ln3+ (molar ratio 4:1:1). Planar polymolecular assemblies in the size range of hundreds of nanometers are achieved and deliver unprecedented gains in magnetic response. The proposed heating and cooling procedure further allowed to regenerate the highly magnetically alignable DMPC/Cholesterol/DMPE-DTPA/Ln3+ (molar ratio 16:4:5:5) species after storage for one month frozen at -18 °C. The simplicity and viability of the proposed fabrication procedure offers a new set of highly magnetically responsive lanthanide ion chelating phospholipid polymolecular assemblies as building blocks for the smart soft materials of tomorrow.

Mastering the magnetic susceptibility of magnetically responsive bicelles with 3ß-amino-5-cholestene and complexed lanthanide ions.

The magnetic susceptibility of lanthanide-chelating bicelles was selectively enhanced by introducing 3ß-amino-5-cholestene (aminocholesterol, Chol-NH2) in the bilayer. Unprecedented magnetic alignment of the bicelles was achieved without altering their size. An aminocholesterol conjugate (Chol-C2OC2-NH2), in combination with different lanthanide ions, offers the possibility of fine-tuning the bicelle's magnetic susceptibility.

Tailoring Bicelle Morphology and Thermal Stability with Lanthanide-Chelating Cholesterol Conjugates.

Bicelles composed of DMPC and phospholipids capable of chelating lanthanide ions, such as 1,2-dimyristoyl-sn-glycero-3-phospho-ethanolamine-diethylene triaminepentaacetate (DMPE-DTPA), are highly tunable magnetically responsive soft materials. Further doping of these systems with cholesterol-DTPA conjugates complexed to a lanthanide ion considerably enhances the bicelle's size and magnetic alignability. The high value of these cholesterol conjugates for bicelle design remains largely unexplored. Herein, we examine how molecular structural alterations within the cholesterol-DTPA conjugates lead to contrasting self-assembled polymolecular aggregate structures when incorporated into DMPC/DMPE-DTPA/Tm(3+) bilayers. The nature of the linker connecting the DTPA-chelating moiety to the sterol backbone is examined by synthesizing conjugates of various linker lengths and polarities. The incorporation of these compounds within the bilayer results in polymolecular aggregate geometries of higher curvature. The increasing degrees of freedom for conformational changes conveyed to the chelator headgroup with increasing linker atomic length reduce the cholesterol-DTPA conjugate's critical packing parameter. Consequently, an inverse correlation between the number of carbon atoms in the linker and the bicelle radius is established. The introduction of polarity into the carbon chain of the linker did not cause major changes in the polymolecular aggregate architecture. Under specific conditions, the additives permit the formation of remarkably temperature-resistant bicelles. The versatility of design offered by these amphiphiles gives rise to new and viable tools for the growing field of magnetically responsive soft materials.

Hagfish slime and mucin flow properties and their implications for defense.

When hagfish (Myxinidae) are attacked by predators, they form a dilute, elastic, and cohesive defensive slime made of mucins and protein threads. In this study we propose a link between flow behavior and defense mechanism of hagfish slime. Oscillatory rheological measurements reveal that hagfish slime forms viscoelastic networks at low concentrations. Mucins alone did not contribute viscoelasticity, however in shear flow, viscosity was observed. The unidirectional flow, experienced by hagfish slime during suction feeding by predators, was mimicked with extensional rheology. Elongational stresses were found to increase mucin viscosity. The resulting higher resistance to flow could support clogging of the attacker's gills. Shear flow in contrast decreases the slime viscosity by mucin aggregation and leads to a collapse of the slime network. Hagfish may benefit from this collapse when trapped in their own slime and facing suffocation by tying a sliding knot with their body to shear off the slime. This removal could be facilitated by the apparent shear thinning behavior of the slime. Therefore hagfish slime, thickening in elongation and thinning in shear, presents a sophisticated natural high water content gel with flow properties that may be beneficial for both, defense and escape.

Gelation of Soy Milk with Hagfish Exudate Creates a Flocculated and Fibrous Emulsion- and Particle Gel.

Hagfish slime is an ultra dilute, elastic and cohesive hydrogel that deploys within milliseconds in cold seawater from a glandularly secreted exudate. The slime is made of long keratin-like fibers and mucin-like glycoproteins that span a network which entraps water and acts as a defense mechanism against predators. Unlike other hydrogels, the slime only confines water physically and is very susceptible to mechanical stress, which makes it unsuitable for many processing operations and potential applications. Despite its huge potential, little work has been done to improve and functionalize the properties of this hydrogel. To address this shortcoming, hagfish exudate was mixed with a soy protein isolate suspension (4% w/v) and with a soy emulsion (commercial soy milk) to form a more stable structure and combine the functionalities of a suspension and emulsion with those of the hydrogel. Hagfish exudate interacted strongly with the soy systems, showing a markedly increased viscoelasticity and water retention. Hagfish mucin was found to induce a depletion and bridging mechanism, which caused the emulsion and suspension to flocculate, making "soy slime", a cohesive and cold-set emulsion- and particle gel. The flocculation network increases viscoelasticity and substantially contributes to liquid retention by entrapping liquid in the additional confinements between aggregated particles and protein fibers. Because the mucin-induced flocculation resembles the salt- or acid-induced flocculation in tofu curd production, the soy slime was cooked for comparison. The cooked soy slime was similar to conventional cooked tofu, but possessed a long-range cohesiveness from the fibers. The fibrous, cold-set, and curd-like structure of the soy slime represents a novel way for a cold coagulation and fiber incorporation into a suspension or emulsion. This mechanism could be used to efficiently gel functionalized emulsions or produce novel tofu-like structured food products.

Fiber-Enforced Hydrogels: Hagfish Slime Stabilized with Biopolymers including κ-Carrageenan.

Hagfish slime, a remarkable soft and elastic hydrogel, is formed by hagfish as a defense mechanism against predation. The extremely fast slime formation, the high water content, and protein threads up to 30 cm in length make it a promising material for the development of hydrogels with embedded fibers. However, under environmental conditions, i.e., in agitation in seawater, the slime collapses. To address the limited structural stability but use the potential of the protein threads as a backbone in fiber enforced materials, we generated composite structures of hagfish slime with biopolymers. Hagfish slime mixed with chitosan reveals that the slime's mucin fraction has a negative charge due to strong aggregation of both components. The gels formed by κ-carrageenan and starch show synergistic effects by exhibiting high values of water content, elasticity, and viscosity. We demonstrated that in combination with negatively charged biopolymers, fiber enforced hydrogels can be formed. This fiber enforced material has a pronounced cohesiveness and stability, thus combining both properties of biopolymers and hagfish slime.

Transient receptor potential vanilloid 2-mediated shear-stress responses in C2C12 myoblasts are regulated by serum and extracellular matrix.

The developmental sensitivity of skeletal muscle to mechanical forces is unparalleled in other tissues. Calcium entry via reputedly mechanosensitive transient receptor potential (TRP) channel classes has been shown to play an essential role in both the early proliferative stage and subsequent differentiation of skeletal muscle myoblasts, particularly TRP canonical (TRPC) 1 and TRP vanilloid (TRPV) 2. Here we show that C2C12 murine myoblasts respond to fluid flow-induced shear stress with increments in cytosolic calcium that are largely initiated by the mechanosensitive opening of TRPV2 channels. Response to fluid flow was augmented by growth in low extracellular serum concentration (5 vs. 20% fetal bovine serum) by greater than 9-fold and at 18 h in culture, coincident with the greatest TRPV2 channel expression under identical conditions (P < 0.02). Fluid flow responses were also enhanced by substrate functionalization with laminin, rather than with fibronectin, agreeing with previous findings that the gating of TRPV2 is facilitated by laminin. Fluid flow-induced calcium increments were blocked by ruthenium red (27%) and SKF-96365 (38%), whereas they were unaltered by 2-aminoethoxydiphenyl borate, further corroborating that TRPV2 channels play a predominant role in fluid flow mechanosensitivity over that of TRPC1 and TRP melastatin (TRPM) 7.

A Microarray-Matrix-assisted Laser Desorption/Ionization-Mass Spectrometry Approach for Site-specific Protein N-glycosylation Analysis, as Demonstrated for Human Serum Immunoglobulin M (IgM).

We demonstrate a new approach for the site-specific identification and characterization of protein N-glycosylation. It is based on a nano-liquid chromatography microarray-matrix assisted laser desorption/ionization-MS platform, which employs droplet microfluidics for on-plate nanoliter reactions. A chromatographic separation of a proteolytic digest is deposited at a high frequency on the microarray. In this way, a short separation run is archived into thousands of nanoliter reaction cavities, and chromatographic peaks are spread over multiple array spots. After fractionation, each other spot is treated with PNGaseF to generate two correlated traces within one run, one with treated spots where glycans are enzymatically released from the peptides, and one containing the intact glycopeptides. Mining for distinct glycosites is performed by searching for the predicted deglycosylated peptides in the treated trace. An identified peptide then leads directly to the position of the "intact" glycopeptide clusters, which are located in the adjacent spots. Furthermore, the deglycosylated peptide can be sequenced efficiently in a simple collision-induced dissociation-MS experiment. We applied the microarray approach to a detailed site-specific glycosylation analysis of human serum IgM. By scanning the treated spots with low-resolution matrix assisted laser desorption/ionization-time-of-flight-MS, we observed all five deglycosylated peptides, including the one originating from the secretory chain. A detailed glycopeptide characterization was then accomplished on the adjacent, untreated spots with high mass resolution and high mass accuracy using a matrix assisted laser desorption ionization-Fourier transform-MS. We present the first detailed and comprehensive mass spectrometric analysis on the glycopeptide level for human polyclonal IgM with high mass accuracy. Besides complex type glycans on Asn 395, 332, 171, and on the J chain, we observed oligomannosidic glycans on Asn 563, Asn 402 and minor amounts of oligomannosidic glycans on the glycosite Asn 171. Furthermore, hybrid type glycans were found on Asn 402, Asn 171 and in traces Asn 332.