Characterization of a retroreflector array for 320-GHz interferometer system in Heliotron J.

A retroreflector array, composed of a cluster of small retroreflectors, is experimentally studied for application to a Michelson-type interferometer system in the fusion plasma experiment. Such a new-type reflector has the potential to be a vital and effective tool at a spatially limited location, such as on the vacuum chamber wall of plasma experimental devices. To investigate the effect of retroreflector array on the reflected beam properties, a tabletop experiment is performed with the retroreflector array composed of 4 mm corner-cube retroreflectors and with a 320-GHz (λ ∼ 0.937 mm) submillimeter wave source. An imaging camera is utilized to measure the submillimeter wave beam profile and is scanned perpendicularly to the beam propagation direction if necessary. The experimental result exhibits a diffraction effect on the reflected beam, resulting in the emergence of discrete peaks on the reflected beam profile, as predicted in the past numerical study; however, the most reflected beam power converges on the one reflected into the incident direction, resulting from a property as a retroreflector. Furthermore, the dependence of the reflected beam on the incident beam angle is characterized while fixing the detector position, and the retroreflection beam intensity is found to vary due to the diffraction effect. Such an undesired variation of beam intensity induced by the diffraction can be suppressed with a focusing lens placed in front of the detector in the practical application to an interferometer.

Development and initial results of 320 GHz interferometer system in Heliotron J.

A new 320 GHz solid-state source interferometer is installed in the Heliotron J helical device to explore the physics of high-density plasmas (ne > 2-3 × 1019 m-3, typically) realized with advanced fueling techniques. This interferometry system is of the Michelson type and is based on the heterodyne principle, with two independent solid-state sources that can deliver an output power of up to 50 mW. A high time resolution measurement of <1 µs can be derived by tuning the frequency of one source in the frequency range of 312-324 GHz on the new system, which can realize the fluctuation measurement. We successfully measured the line-averaged electron density in high-density plasma experiments. The measured density agreed well with a microwave interferometer measurement using a different viewing chord, demonstrating that the new system can be used for routine diagnostics of electron density in Heliotron J.

Measurement of Paα line from pellet ablation cloud in Heliotron J.

The Paα line (1875.13 nm) in the near-infrared (NIR) region was evaluated to apply Stark broadening of the line spectrum to the electron density measurement of the small-pellet ablation cloud in Heliotron J, a medium-sized helical-axis heliotron device. Paα is three-to-four times broader than the visible Hß line (486.13 nm) for the same electron density. Using a portable NIR spectrometer, preliminary proof-of-concept experiments determined the marginal density, below which the broadening was undetectable. The lower detection density limit can be decreased using a narrower entrance slit or a denser grating.

Three-dimensional dynamics of fluctuations appearing during pellet ablation process around a pellet in a fusion plasma experiment.

Understanding pellet ablation physics is crucial to realizing efficient fueling into a high temperature plasma for the steady state operation of ITER and future fusion reactors. Here we report the first observation of the formation of fluctuation structures in the pellet plasmoid during the pellet ablation process by a fast camera in a medium-sized fusion device, Heliotron J. The fluctuation has a normalized fluctuation level of ~ 15% and propagates around the moving pellet across the magnetic field. By comparing the fluctuation structures with the shape of magnetic field lines calculated with the field line tracing code, we successfully reconstruct the spatio-temporal structure of the fluctuations during the pellet ablation process. The fluctuations are located at the locations displaced toroidally from the pellet and propagate in the cross-field direction around the pellet axis along the field line, indicating a three-dimensional behavior and structure of fluctuations. The fluctuation would be driven by a strong inhomogeneity formed around the pellet and invoke the relaxation of the gradient through a cross-field transport induced by the fluctuations, which could affect the pellet ablation and pellet fueling processes. Such fluctuations can be ubiquitously present at the inhomogeneity formed around a pellet in the pellet ablation process in fusion devices.

Comparison of the Antiemetic Effect of Aprepitant/granisetron and Palonosetron Combined with Dexamethasone in Gynecological Cancer Patients Treated with Paclitaxel and Carboplatin Combination Regimen.

A triple antiemetic therapy combining aprepitant (APR) with conventional double antiemetic therapy, including 5-hydroxytryptamine 3 receptor antagonist (5-HT3-RA) and dexamethasone (DEX), is recommended for preventing chemotherapy-induced nausea and vomiting induced by a carboplatin (CBDCA) regimen. However, consensus on the additive effects of APR for gynecological patients on a combined regimen of paclitaxel and CBDCA (TC regimen) has yet to be reached. This retrospective study investigated the antiemetic effects of palonosetron and DEX (PD therapy) and granisetron and DEX with APR (GDA therapy) in patients with gynecologic cancer and who underwent their first TC regimen cycle between April 2017 and March 2020 at the Gunma University Hospital Outpatient Chemotherapy Center. The results showed that the complete response rate of the 92 patients who underwent PD therapy (PD group) and the 46 patients who underwent GDA therapy (GDA group) were both 80.4% (p = 1.000), and the complete control rates of the PD and GDA groups were 78.3% and 80.4%, respectively (p = 0.828), resulting in no significant difference. Furthermore, we observed no significant difference between the PD and GDA groups in the incidence of grade ≥2 nausea, vomiting, and anorexia (nausea: 7.6% vs. 0%, p = 0.095; vomiting: 4.3% vs. 0%, p = 0.301; and anorexia: 9.8% vs. 2.2%, p = 0.164). Concerning adverse events, compared to the PD group, the GDA group showed significantly higher incidence of grade ≥2 malaise (7.6% vs. 19.6%, p = 0.039). Given the lack of difference in the antiemetic effects of PD and GDA therapies, antiemetic therapy should be selected carefully for individual patients by accounting for the incidence of adverse reactions and interactions with APR.

Development of a multi-channel 320 GHz interferometer for high density plasma measurement in Heliotron J.

We report the development of a new interferometer with two stable, high-power, 320 GHz solid-state sources in Heliotron J. A heterodyne Michelson interferometer optical scheme is employed. Two solid-state oscillators are utilized as sources with a fixed frequency at 320 GHz and frequency tunable of 312-324 GHz. Quasi-optical techniques are used for beam transmission. The beam is elongated in the vertical direction with two off-axis parabolic mirrors and injected into the plasma as a sheet beam for the multi-channel measurement (>5 ch.). Passing through the plasma, the beam is reflected at a retroreflector-array installed at the vacuum chamber wall. The retroreflector-array is a bunch of retroreflector structures, which can suppress the beam refraction caused by plasma without much space inside a vacuum chamber unlike a single retroreflector and can facilitate the system design. The source, detectors, and the retroreflector-array are tested to evaluate their basic performance on a tabletop experiment.

Sensitivity improvement of infrared imaging video bolometer for divertor plasma measurement.

The sensitivity of an infrared imaging video bolometer (IRVB) was improved for the measurement of relatively low energy plasma radiation from the viewpoint of the metal foil absorber material. The photon energy of the radiation was considered up to 1 keV for the divertor plasma measurement. The thickness of the foil absorber was evaluated not only for conventional heavy elements, e.g., platinum, but also for light elements by the relation between the photon energy and attenuation length and by mechanical strength. A heat-transfer calculation using ANSYS suggested that light elements with practical foil thickness provide a higher temperature rise of the foil absorber compared with heavier elements with practical foil thickness. The maximum of the temperature rise was evaluated using He-Ne laser irradiation onto absorber samples. The material dependence of the temperature rise has a similar tendency between calculations and experiments. Experimentally, the sensitivity of the IRVB improved from 280 to 110 µW/cm2 using titanium with 1 µm thickness compared with conventional platinum with 2.5 µm thickness. Consequently, the signal-to-noise ratio of the IRVB could be improved from 2.8 to 9.1.

Development of beam emission spectroscopy in the helically symmetric experiment stellarator.

This study shows the feasibility of a beam emission spectroscopy (BES) diagnostic in the Helically Symmetric eXperiment (HSX) stellarator for obtaining the spatiotemporal structure of density fluctuation. A beam emission simulation was applied to HSX plasmas to design and optimize viewing chords and to estimate the beam emission spectrum. A Doppler-shifted beam emission spectrum was measured from a 30 kV, 4 A diagnostic neutral beam injected into HSX plasmas. The beam emission was measured with a high-time-resolution avalanche photodiode (APD) assembly to determine the feasibility of BES in HSX. For HSX plasmas heated by 28 GHz electron cyclotron heating, a mode around f = 15 kHz was observed in the BES signal. The coherence between the BES signal and the density fluctuation measured by an interferometer system was significant. A plan for improving the BES system to enable the measurement of higher frequency related to turbulent transport is presented. The array of sightlines proposed in this study can be used to measure beam emission with a Doppler shift larger than 3 nm (blue shift), which enables the use of a wide passband interference filter to obtain higher throughput. The adoption of a large objective optics and a chilled APD assembly will improve the signal-to-noise ratio.

Reformation of the Electron Internal Transport Barrier with the Appearance of a Magnetic Island.

When realising future fusion reactors, their stationary burning must be maintained and the heat flux to the divertor must be reduced. This essentially requires a stationary internal transport barrier (ITB) plasma with a fast control system. However, the time scale for determining the position of the foot point of an ITB is not clearly understood even though its understanding is indispensable for fast profile control. In this study, the foot point of the electron ITB (eITB) was observed to be reformed at the vicinity of a magnetic island when the island started to form. In addition, the enhanced confinement region was observed to expand during the eITB formation according to the radial movement of the magnetic island toward the outer region. Compared to the time scales of the local heat transport, the faster time scales of the movement of the eITB foot point immediately after island formation (~0.5 ms) suggest the importance of the magnetic island for plasma profile control to maintain stationary burning.

Direct Measurement of a Toroidally Directed Zonal Flow in a Toroidal Plasma.

Zonal flow appears in toroidal, magnetically confined plasmas as part of the self-regulated interaction of turbulence and transport processes. For toroidal plasmas having a strong toroidal magnetic field, the zonal flow is predominately poloidally directed. This Letter reports the first observation of a zonal flow that is toroidally directed. The measurements are made just inside the last closed flux surface of reversed field pinch plasmas that have a dominant poloidal magnetic field. A limit cycle oscillation between the strength of the zonal flow and the amplitude of plasma potential fluctuations is observed, which provides evidence for the self-regulation characteristic of drift-wave-type plasma turbulence. The measurements help advance understanding and gyrokinetic modeling of toroidal plasmas in the pursuit of fusion energy.

Characterisation of antibiotic resistance of Salmonella isolated from dog treats in Japan.

Dog treats might be contaminated with Salmonella. In Canada and the USA, outbreaks of human salmonellosis related to exposure to animal-derived dog treats were reported. Consequently, surveillance data on Salmonella contamination of dog treats have been gathered in many countries, but not in Japan. In the current study, we investigated whether dog treats in Japan were contaminated with Salmonella. Overall, 303 dog treats (of which 255 were domestically produced) were randomly collected and the presence of Salmonella investigated. Seven samples were positive for Salmonella enterica subsp. enterica. Among these isolates, three were identified as serovar 4,5,12:i:-; two were serovar Rissen; and two were serovar Thompson. All serovar 4,5,12:i:- and Thompson isolates were resistant to one or more drugs. Two serovar Rissen isolates were fully susceptible to all tested antimicrobial agents. All Salmonella isolates were susceptible to cefotaxime, ciprofloxacin and nalidixic acid. The gene blaTEM was detected in two serovar 4,5,12:i:- isolates. The blaCTX-M and blaCMY genes were not detected in any isolates. This study demonstrated that dog treats in Japan could constitute a potential source of dog and human Salmonella infections, including multidrug-resistant Salmonella isolates.

Density profile measurement with a heavy ion beam probe in a toroidal plasma of the compact helical system.

A possibility of electron density measurements with heavy ion beam probes (HIBPs) has been demonstrated, along with their capability to measure the potential and magnetic field. A method has been proposed to reconstruct the electron density profile [A. Fujisawa et al., Rev. Sci. Instrum. 74, 3335 (2003)]. In the method, the profile of secondary beam currents is converted into a local density profile by taking into account local brightness and so-called path integral effects which mean the effect of beam attenuation along the beam orbit. Here the article presents the HIBP measurement of the electron density profile after the proposed method was first applied on the real experimental data of compact helical system plasmas. In the real application, the hollow density and the peaked profiles are successfully obtained with sufficiently high temporal resolution (a few ms), in accordance with the electron density profile measured with Thomson scattering for electron cyclotron resonance heating and neutral beam injection plasmas.

Application of portable near-infrared spectrometer to Heliotron J plasma diagnostics.

A simple near-infrared (NIR) spectrometer with a wavelength range of 898-2130 nm has recently been applied to diagnose Heliotron J plasmas. It adopts a symmetrical crossed Czerny-Turner mount equipped with a thermoelectrically cooled 512 channel InGaAs linear sensor. Reciprocal linear dispersion was deduced to 96.37 nm/mm at the center of the detector. External filters can be inserted into the path of the collection optics to reject second-order spectra, as needed. Absolute intensity calibration was performed together with a visible spectrometer using a tungsten halogen lamp, and the effect of the transmittance fringe in the visible region of the applied long-pass filter on the NIR calibration was investigated. The intended application of the NIR spectrometer includes extending the wavelength region of a spectral monitor to less contaminated regions for Heliotron J plasma studies. In preliminary measurements, we observed the Paschen series for the hydrogen pellet injection plasma and two atomic helium lines, i.e., 2S-2P singlet and triplet lines, in helium gas puffing experiments. A continuum spectrum in this regime that is attributable to black-body radiation from hot spots on the plasma-facing components was identified. In addition, this may also be used to monitor background radiation in the YAG-Thomson scattering signals near 1064 nm.

Development of a multi-channel capacitive probe for electric field measurements with fine spatial and high time resolution.

A capacitive probe [Tan et al., Rev. Sci. Instrum. 88, 023502 (2017)] is one of a few diagnostics that is directly sensitive to the plasma potential. Using this diagnostic technique, a Multi-channel Linear Capacitive Probe (MLCP) is developed for turbulence measurements. The MLCP has 10 spatial channels and provides 9 points of radial electric field measurements simultaneously with a spatial step of 7 mm. A new readout circuit and a correction technique for low frequency attenuation are also developed to achieve the required spatial and time resolution. A performance test of the MLCP using a reversed field pinch plasma confirms that the MLCP resolves sub-centimeter structures of the equilibrium radial electric field profile and fluctuations up to 680 kHz.

Faraday-cup-type lost fast ion detector on Heliotron J.

A Faraday-cup type lost-fast ion probe (FLIP) has been designed and installed in Heliotron J for the purpose of the studies of interaction between fast ions and MHD instabilities. The FLIP can measure the co-going fast ions whose energy is in the range of 1.7-42.5 keV (proton) and pitch angle of 90∘-140∘, especially for fast ions having the injection energy of neutral beam injection (NBI). The FLIP successfully measured the re-entering passing ions and trapped lost-fast ions caused by fast-ion-driven energetic particle modes in NBI heated plasmas.

Development of beam emission spectroscopy for turbulence transport study in Heliotron J.

This paper describes the development study of the beam emission spectroscopy (BES) for the turbulent transport study in Heliotron J. Modification of the sightlines (10 × 4 for edge and 10 × 2 for edge) enables us to obtain 2-dimensional BES imaging. The cooling effect on the reduction in the electrical noise of avalanche photodiode (APD) assembly has been investigated using a refrigerant cooling system. When the temperature of the APD element has set to be -20 °C, the electrical noise can be reduced more than 50%. The measurement error of the phase difference in the case of low signal level has been tested by two light-emitting diode lamps. The APD cooling has an effect to improve the measurement error at the low signal level of APD.

Injection barrel with a tapered structure for a low speed and small size cryogenic hydrogen pellet in medium-sized plasma fusion devices.

An injection barrel was designed and fabricated for a small size 0.8 mm cryogenic pellet with a low speed of 200-300 m/s in medium-sized plasma fusion devices. Pellet injection with pneumatic acceleration was examined using a conventional in situ technique. A tapered structure was applied in the downstream side of the injection barrel to satisfy the requirement of pellet speed reduction by expansion of the propellant gas. Shadowgraph and light gate measurements show that the intact pellets have speeds of 260 ± 30 m/s and a typical size of 1.1-1.2 mm. The pellet ablation code based on a neutral gas shielding model shows that the penetration depth of the measured pellet parameters does not cross the plasma center, even in medium-sized plasma devices such as the Heliotron J helical device. The injection barrel with a tapered structure developed in this study is feasible for low speed pellet injection.

Monocyte CD64 expression as a novel biomarker for the disease activity of systemic lupus erythematosus.

OBJECTIVE: Interferon alpha (IFN-α) is a key cytokine associated with systemic lupus erythematosus (SLE). IFN-α induces the expression of CD64 on monocytes (mCD64). Although enhanced mCD64 expression has been reported in patients with SLE, it has never been assessed quantitatively. The aim of this study was to investigate whether or not mCD64 expression correlates with SLE disease activity. METHODS: The mCD64 expression levels were assessed quantitatively in 40 patients with active or inactive SLE by using flow cytometry. The mCD64 expression levels were subsequently compared with the SLE disease activity index (SLEDAI) and levels of existing SLE activity biomarkers, such as anti-DNA antibody, complements, and so on. RESULTS: The mCD64 expression was significantly higher in active disease than in inactive disease SLE (median molecules/cell, interquartile range: 34,648, 8174-24,932 and 20,865, 6357-21,503, respectively; p < 0.001). The levels of mCD64 expression strongly correlated with SLEDAI (r = 0.68, p < 0.001). CONCLUSION: The mCD64 expression is a simple and useful biomarker for evaluating disease activity in patients with SLE.

First measurement of time evolution of electron temperature profiles with Nd:YAG Thomson scattering system on Heliotron J.

A Nd:YAG Thomson scattering system has been developed for Heliotron J. The system consists of two 550 mJ 50 Hz lasers, large collection optics, and 25 radial channel (∼1 cm spatial resolution) interference polychromators. This measurement system achieves a S/N ratio of ∼50 for low-density plasma (ne ∼ 0.5 × 10(19) m(-3)). A time evolution of electron temperature profiles was measured with this system for a high-intensity gas-puff (HIGP) fueling neutral-beam-injection plasma. The peripheral temperature of the higher-density phase after HIGP recovers to the low-density pre-HIGP level, suggesting that improving particle transport in the HIGP plasma may be possible.