Copper-loaded Milk-Protein Derived Microgel Preserves Cardiac Metabolic Homeostasis After Myocardial Infarction.

Myocardial Infarction (MI) is a leading cause of death worldwide. Metabolic modulation is a promising therapeutic approach to prevent adverse remodeling after MI. However, whether material-derived cues can treat MI through metabolic regulation is mainly unexplored. Herein, a Cu2+ loaded casein microgel (CuCMG) aiming to rescue the pathological intramyocardial metabolism for MI amelioration is developed. Cu2+ is an important ion factor involved in metabolic pathways, and intracardiac copper drain is observed after MI. It is thus speculated that intramyocardial supplementation of Cu2+ can rescue myocardial metabolism. Casein, a milk-derived protein, is screened out as Cu2+ carrier through molecular-docking based on Cu2+ loading capacity and accessibility. CuCMGs notably attenuate MI-induced cardiac dysfunction and maladaptive remodeling, accompanied by increased angiogenesis. The results from unbiased transcriptome profiling and oxidative phosphorylation analyses support the hypothesis that CuCMG prominently rescued the metabolic homeostasis of myocardium after MI. These findings enhance the understanding of the design and application of metabolic-modulating biomaterials for ischemic cardiomyopathy therapy.

Co-axial hydrogel spinning for facile biofabrication of prostate cancer-like 3D models.

Glandular cancers are amongst the most prevalent types of cancer, which can develop in many different organs, presenting challenges in their detection as well as high treatment variability and failure rates. For that purpose, anticancer drugs are commonly tested in cancer cell lines grown in 2D tissue culture on plastic dishesin vitro, or in animal modelsin vivo. However, 2D culture models diverge significantly from the 3D characteristics of living tissues and animal models require extensive animal use and time. Glandular cancers, such as prostate cancer-the second leading cause of male cancer death-typically exist in co-centrical architectures where a cell layer surrounds an acellular lumen. Herein, this spatial cellular position and 3D architecture, containing dual compartments with different hydrogel materials, is engineered using a simple co-axial nozzle setup, in a single step utilizing prostate as a model of glandular cancer. The resulting hydrogel soft structures support viable prostate cancer cells of different cell lines and enable over-time maturation into cancer-mimicking aggregates surrounding the acellular core. The biofabricated cancer mimicking structures are then used as a model to predict the inhibitory efficacy of the poly ADP ribose polymerase inhibitor, Talazoparib, and the antiandrogen drug, Enzalutamide, in the growth of the cancer cell layer. Our results show that the obtained hydrogel constructs can be adapted to quickly obtain 3D cancer models which combine 3D physiological architectures with high-throughput screening to detect and optimize anti-cancer drugs in prostate and potentially other glandular cancer types.

Cell Patterning Using Magnetic-Archimedes Strategy.

Cell patterning, allowing precise control of cell positioning, presents a unique advantage in the study of cell behavior. In this protocol, a cell patterning strategy based on the Magnetic-Archimedes (Mag-Arch) effect is introduced. This approach enables precise control of cell distribution without the use of ink materials or labeling particles. By introducing a paramagnetic reagent to enhance the magnetic susceptibility of the cell culture medium, cells are repelled by magnets and arrange themselves into a pattern complementary to the magnet sets positioned beneath the microfluidic substrate. In this article, detailed procedures for cell patterning using the Mag-Arch-based strategy are provided. Methods for patterning single-cell types as well as multiple cell types for co-culture experiments are offered. Additionally, comprehensive instructions for fabricating microfluidic devices containing channels for cell patterning are provided. Achieving this feature using parallel methods is challenging but can be done in a simplified and cost-effective manner. Employing Mag-Arch-based cell patterning equips researchers with a powerful tool for in vitro research.

Rapid UV Photo-Cross-Linking of α-Lactalbumin Hydrogel Biomaterial To Enable Wound Healing.

Although both the function and biocompatibility of protein-based biomaterials are better than those of synthetic materials, their usage as medical material is currently limited by their high costs, low yield, and low batch-to-batch reproducibility. In this article, we show how α-lactalbumin (α-LA), rich in tryptophan, was used to produce a novel type of naturally occurring, protein-based biomaterial suitable for wound dressing. To create a photo-cross-linkable polymer, α-LA was methacrylated at a 100-g batch scale with >95% conversion and 90% yield. α-LAMA was further processed using photo-cross-linking-based advanced processing techniques such as microfluidics and 3D printing to create injectable hydrogels, monodispersed microspheres, and patterned scaffolds. The obtained α-LAMA hydrogels show promising biocompatibility and degradability during in vivo testing. Additionally, the α-LAMA hydrogel can accelerate post-traumatic wound healing and promote new tissue regeneration. In conclusion, cheap and safe α-LAMA-based biomaterials could be produced, and they have a beneficial effect on wound healing. As a result, there may arise a potential partnership between the dairy industry and the development of pharmaceuticals.

Enhancing aortic valve drug delivery with PAR2-targeting magnetic nano-cargoes for calcification alleviation.

Calcific aortic valve disease is a prevalent cardiovascular disease with no available drugs capable of effectively preventing its progression. Hence, an efficient drug delivery system could serve as a valuable tool in drug screening and potentially enhance therapeutic efficacy. However, due to the rapid blood flow rate associated with aortic valve stenosis and the lack of specific markers, achieving targeted drug delivery for calcific aortic valve disease has proved to be challenging. Here we find that protease-activated-receptor 2 (PAR2) expression is up-regulated on the plasma membrane of osteogenically differentiated valvular interstitial cells. Accordingly, we develop a magnetic nanocarrier functionalized with PAR2-targeting hexapeptide for dual-active targeting drug delivery. We show that the nanocarriers effectively deliver XCT790-an anti-calcification drug-to the calcified aortic valve under extra magnetic field navigation. We demonstrate that the nano-cargoes consequently inhibit the osteogenic differentiation of valvular interstitial cells, and alleviate aortic valve calcification and stenosis in a high-fat diet-fed low-density lipoprotein receptor-deficient (Ldlr-/-) mouse model. This work combining PAR2- and magnetic-targeting presents an effective targeted drug delivery system for treating calcific aortic valve disease in a murine model, promising future clinical translation.

Exogeneous metal ions as therapeutic agents in cardiovascular disease and their delivery strategies.

Metal ions participate in many metabolic processes in the human body, and their homeostasis is crucial for life. In cardiovascular diseases (CVDs), the equilibriums of metal ions are frequently interrupted, which are related to a variety of disturbances of physiological processes leading to abnormal cardiac functions. Exogenous supplement of metal ions has the potential to work as therapeutic strategies for the treatment of CVDs. Compared with other therapeutic drugs, metal ions possess broad availability, good stability and safety and diverse drug delivery strategies. The delivery strategies of metal ions are important to exert their therapeutic effects and reduce the potential toxic side effects for cardiovascular applications, which are also receiving increasing attention. Controllable local delivery strategies for metal ions based on various biomaterials are constantly being designed. In this review, we comprehensively summarized the positive roles of metal ions in the treatment of CVDs from three aspects: protecting cells from oxidative stress, inducing angiogenesis, and adjusting the functions of ion channels. In addition, we introduced the transferability of metal ions in vascular reconstruction and cardiac tissue repair, as well as the currently available engineered strategies for the precise delivery of metal ions, such as integrated with nanoparticles, hydrogels and scaffolds.

An optical nanofibre-enabled on-chip single-nanoparticle sensor.

Single-nanoparticle detection has received tremendous interest due to its significance in fundamental physics and biological applications. Here, we demonstrate an optical nanofibre-enabled microfluidic sensor for the detection and sizing of nanoparticles. Benefitting from the strong evanescent field outside the nanofibre, a nanoparticle close to the nanofibre can scatter a portion of the field energy to the environment, resulting in a decrease in the transmitted intensity of the nanofibre. On the other hand, the narrow and shallow microfluidic channel provides a femtoliter-scale detection region, making nanoparticles flow through the detection region one by one. By real-time monitoring of the transmitted intensity of the nanofibre, the detection of a single polystyrene (PS) nanoparticle as small as 100 nm in diameter and exosomes in solution is realised. Based on a statistical analysis, the mean scattering signal is related to the size of the nanoparticle. Experimentally, a mixture of nanoparticles of different diameters (200, 500, and 1000 nm) in solution is identified. To demonstrate its potential in biological applications, high-throughput counting of yeasts using a pair of microchannels and dual-wavelength detection of fluorescently labelled nanoparticles are realised. We believe that the developed nanoparticle sensor holds great potential for the multiplexed and rapid sensing of diverse viruses.

Programing Cell Assembly via Ink-Free, Label-Free Magneto-Archimedes Based Strategy.

Tissue engineering raised a high requirement to control cell distribution in defined materials and structures. In "ink"-based bioprintings, such as 3D printing and photolithography, cells were associated with inks for spatial orientation; the conditions suitable for one ink are hard to apply on other inks, which increases the obstacle in their universalization. The Magneto-Archimedes effect based (Mag-Arch) strategy can modulate cell locomotion directly without impelling inks. In a paramagnetic medium, cells were repelled from high magnetic strength zones due to their innate diamagnetism, which is independent of substrate properties. However, Mag-Arch has not been developed into a powerful bioprinting strategy as its precision, complexity, and throughput are limited by magnetic field distribution. By controlling the paramagnetic reagent concentration in the medium and the gaps between magnets, which decide the cell repelling scope of magnets, we created simultaneously more than a hundred micrometer scale identical assemblies into designed patterns (such as alphabets) with single/multiple cell types. Cell patterning models for cell migration and immune cell adhesion studies were conveniently created by Mag-Arch. As a proof of concept, we patterned a tumor/endothelial coculture model within a covered microfluidic channel to mimic epithelial-mesenchymal transition (EMT) under shear stress in a cancer pathological environment, which gave a potential solution to pattern multiple cell types in a confined space without any premodification. Overall, our Mag-Arch patterning presents an alternative strategy for the biofabrication and biohybrid assembly of cells with biomaterials featured in controlled distribution and organization, which can be broadly employed in tissue engineering, regenerative medicine, and cell biology research.

A biodegradable, flexible photonic patch for in vivo phototherapy.

Diagnostic and therapeutic illumination on internal organs and tissues with high controllability and adaptability in terms of spectrum, area, depth, and intensity remains a major challenge. Here, we present a flexible, biodegradable photonic device called iCarP with a micrometer scale air gap between a refractive polyester patch and the embedded removable tapered optical fiber. ICarP combines the advantages of light diffraction by the tapered optical fiber, dual refractions in the air gap, and reflection inside the patch to obtain a bulb-like illumination, guiding light towards target tissue. We show that iCarP achieves large area, high intensity, wide spectrum, continuous or pulsatile, deeply penetrating illumination without puncturing the target tissues and demonstrate that it supports phototherapies with different photosensitizers. We find that the photonic device is compatible with thoracoscopy-based minimally invasive implantation onto beating hearts. These initial results show that iCarP could be a safe, precise and widely applicable device suitable for internal organs and tissue illumination and associated diagnosis and therapy.

White-light crosslinkable milk protein bioadhesive with ultrafast gelation for first-aid wound treatment.

BACKGROUND: Post-traumatic massive hemorrhage demands immediately available first-aid supplies with reduced operation time and good surgical compliance. In-situ crosslinking gels that are flexibly adapting to the wound shape have a promising potential, but it is still hard to achieve fast gelation, on-demand adhesion, and wide feasibility at the same time. METHODS: A white-light crosslinkable natural milk-derived casein hydrogel bioadhesive is presented for the first time. Benefiting from abundant tyrosine residues, casein hydrogel bioadhesive was synthesized by forming di-tyrosine bonds under white light with a ruthenium-based catalyst. We firstly optimized the concentration of proteins and initiators to achieve faster gelation and higher mechanical strength. Then, we examined the degradation, cytotoxicity, tissue adhesion, hemostasis, and wound healing ability of the casein hydrogels to study their potential to be used as bioadhesives. RESULT: Rapid gelation of casein hydrogel is initiated with an outdoor flashlight, a cellphone flashlight, or an endoscopy lamp, which facilitates its usage during first-aid and minimally invasive operations. The rapid gelation enables 3D printing of the casein hydrogel and excellent hemostasis even during liver hemorrhage due to section injury. The covalent binding between casein and tissue enables robust adhesion which can withstand more than 180 mmHg blood pressure. Moreover, the casein-based hydrogel can facilitate post-traumatic wound healing caused by trauma due to its biocompatibility. CONCLUSION: Casein-based bioadhesives developed in this study pave a way for broad and practical application in emergency wound management.

Mechanical stress regulates the mechanotransduction and metabolism of cardiac fibroblasts in fibrotic cardiac diseases.

Fibrotic cardiac diseases are characterized by myocardial fibrosis that results in maladaptive cardiac remodeling. Cardiac fibroblasts (CFs) are the main cell type responsible for fibrosis. In response to stress or injury, intrinsic CFs develop into myofibroblasts and produce excess extracellular matrix (ECM) proteins. Myofibroblasts are mechanosensitive cells that can detect changes in tissue stiffness and respond accordingly. Previous studies have revealed that some mechanical stimuli control fibroblast behaviors, including ECM formation, cell migration, and other phenotypic traits. Further, metabolic alteration is reported to regulate fibrotic signaling cascades, such as the transforming growth factor-ß pathway and ECM deposition. However, the relationship between metabolic changes and mechanical stress during fibroblast-to-myofibroblast transition remains unclear. This review aims to elaborate on the crosstalk between mechanical stress and metabolic changes during the pathological transition of cardiac fibroblasts.

A honeybee stinger-inspired self-interlocking microneedle patch and its application in myocardial infarction treatment.

Weak tissue adhesion remains a major challenge in clinical translation of microneedle patches. Mimicking the structural features of honeybee stingers, stiff polymeric microneedles with unidirectionally backward-facing barbs were fabricated and embedded into various elastomer films to produce self-interlocking microneedle patches. The spirality of the barbing pattern was adjusted to increase interlocking efficiency. In addition, the micro-bleeding caused by microneedle puncturing adhered the porous surface of the patch substrate to the target tissue via coagulation. In the demonstrative application of myocardial infarction treatment, the bioinspired microneedle patches firmly fixed on challenging beating hearts, significantly reduced cardiac wall stress and strain in the infarct, and maintained left ventricular function and morphology. In addition, the microneedle patch was minimally invasively implanted onto beating porcine heart in 10 minutes, free of sutures and adhesives. Therefore, the honeybee stinger-inspired microneedles could provide an adaptive and convenient means to implant patches for various medical applications. STATEMENT OF SIGNIFICANCE: Adhesion between tissue and microneedle patches with smooth microneedles is usually weak. We introduce a novel barbing method of fabricating unidirectionally backward facing barbs with controllable spirality on the microneedles on microneedle patches. The microneedle patches self-interlock on mechanically dynamic beating hearts, similar to honeybee stingers. The micro-bleeding and coagulation on the porous surface provide additional adhesion force. The microneedle patches attenuate left ventricular remodeling via mechanical support and are compatible with minimally invasive implantation.

Scalable Milk-Derived Whey Protein Hydrogel as an Implantable Biomaterial.

There are limited naturally derived protein biomaterials for the available medical implants. High cost, low yield, and batch-to-batch inconsistency, as well as intrinsically differing bioactivity in some of the proteins, make them less beneficial as common implant materials compared to their synthetic counterparts. Here, we present a milk-derived whey protein isolate (WPI) as a new kind of natural protein-based biomaterial for medical implants. The WPI was methacrylated at 100 g bench scale, >95% conversion, and 90% yield to generate a photo-cross-linkable material. WPI-MA was further processed into injectable hydrogels, monodispersed microspheres, and patterned scaffolds with photo-cross-linking-based advanced processing methods including microfluidics and 3D printing. In vivo evaluation of the WPI-MA hydrogels showed promising biocompatibility and degradability. Intramyocardial implantation of injectable WPI-MA hydrogels in a model of myocardial infarction attenuated the pathological changes in the left ventricle. Our results indicate a possible therapeutic value of WPI-based biomaterials and give rise to a potential collaboration between the dairy industry and the production of medical therapeutics.

Double-Network Hydrogel Armored Decellularized Porcine Pericardium as Durable Bioprosthetic Heart Valves.

Heart valves have extraordinary fatigue resistance which beat ≈3 billion times in a lifetime. Bioprosthetic heart valves (BHVs) made from fixed heteroplasm that are incrementally used in heart valve replacement fail to sustain the expected durability due to thrombosis, poor endothelialization, inflammation, calcification, and especially mechanical damage induced biocompatibility change. No effective strategy has been reported to conserve the biological properties of BHV after long-term fatigue test. Here, a double-network tough hydrogel is introduced, which interpenetrate and anchor into the matrix of decellularized porcine pericardium (dCell-PP) to form robust and stable conformal coatings and reduce immunogenicity. The ionic crosslinked hyaluronic acid (HA) network mimics the glycocalyx on endothelium which improves antithrombosis and accelerates endothelialization; the chemical crosslinked hydrophilic polyacrylamide (PAAm) network further enhances antifouling properties and strengthens the shielding hydrogels and their interaction with dCell-PP. In vitro and rabbit ex vivo shunt assay demonstrate great hemocompatibility of polyacrylamide/HA hydrogel hybrid PP (P/H-PP). Cell experiments and rat subcutaneous implantation confirm satisfactory endothelialization, biocompatibility, and anticalcification properties. For hydrodynamic experiment, P/H-PP gains full mark at different flow conditions and sustains excellent biomechanical and biological properties after 200 000 000 cycles. P/H double-network hydrogel armoring dCell-PP is a promising progress to extend BHV durability for clinical implantation therapy.

Ulvan mediated VE cadherin antibody and REDV peptide co-modification to improve endothelialization potential of bioprosthetic heart valves.

An aging population and a rapid increase in the incidence of degenerative valve diseases have led to greater use of bioprosthetic heart valves (BHVs). The durability of glutaraldehyde cross-linked bioprostheses currently available for clinical use is poor due to calcification, coagulation, and degradation. Decellularization can partially reduce calcification by removal of xenogenic cells, but can also lead to thrombosis, which can be addressed by further surface modification. The natural sulfated polysaccharide ulvan possesses antithrombotic and anti-inflammatory properties, and can behave as a heparinoid to immobilize proteins through their heparin binding sites. VE-cadherin antibody and the Arg-Glu-Asp-Val (REDV) peptide can facilitate selective endothelial cell attachment, adhesion and proliferation. In this study, we functionalized decellularized porcine pericardium (DPP) with ulvan, REDV, and VE-cadherin antibody (U-R-VE). Ulvan was covalently modified to act as a protective coating and spacer for VE-cadherin antibody, and to immobilize REDV. In in vitro tests, we found that functionalization significantly and selectively promoted adhesion and growth of endothelial cells while reducing platelet adhesion, inflammation, and in vitro calcification of DPPs. In an in vivo subdermal implantation model, U-R-VE modified DPP exhibited greater endothelialization potential and biocompatibility compared with unmodified pericardium. Thus, U-R-VE modification provides a promising solution to the problem of preparing BHVs with enhanced endothelialization potential.

Aldo-keto reductase family 1 member B induces aortic valve calcification by activating hippo signaling in valvular interstitial cells.

AIMS: Calcific aortic valve disease (CAVD) is a primary cause of cardiovascular mortality; however, its mechanisms are unknown. Currently, no effective pharmacotherapy is available for CAVD. Aldo-keto reductase family 1 member B (Akr1B1) has been identified as a potential therapeutic target for valve interstitial cell calcification. Herein, we hypothesized that inhibition of Akr1B1 can attenuate aortic valve calcification. METHODS AND RESULTS: Normal and degenerative tricuspid calcific valves from human samples were analyzed by immunoblotting and immunohistochemistry. The results showed significant upregulation of Akr1B1 in CAVD leaflets. Akr1B1 inhibition attenuated calcification of aortic valve interstitial cells in osteogenic medium. In contrast, overexpression of Akr1B1 aggravated calcification in osteogenic medium. Mechanistically, using RNA sequencing (RNAseq), we revealed that Hippo-YAP signaling functions downstream of Akr1B1. Furthermore, we established that the protein level of the Hippo-YAP signaling effector active-YAP had a positive correlation with Akr1B1. Suppression of YAP reversed Akr1B1 overexpression-induced Runx2 upregulation. Moreover, YAP activated the Runx2 promoter through TEAD1 in a manner mediated by ChIP and luciferase reporter systems. Animal experiments showed that the Akr1B1 inhibitor epalrestat attenuated aortic valve calcification induced by a Western diet in LDLR-/- mice. CONCLUSION: This study demonstrates that inhibition of Akr1B1 can attenuate the degree of calcification both in vitro and in vivo. The Akr1B1 inhibitor epalrestat may be a potential treatment option for CAVD.

Facilitating islet transplantation using a three-step approach with mesenchymal stem cells, encapsulation, and pulsed focused ultrasound.

BACKGROUND: The aim of this study was to examine the effect of a three-step approach that utilizes the application of adipose tissue-derived mesenchymal stem cells (AD-MSCs), encapsulation, and pulsed focused ultrasound (pFUS) to help the engraftment and function of transplanted islets. METHODS: In step 1, islets were co-cultured with AD-MSCs to form a coating of AD-MSCs on islets: here, AD-MSCs had a cytoprotective effect on islets; in step 2, islets coated with AD-MSCs were conformally encapsulated in a thin layer of alginate using a co-axial air-flow method: here, the capsule enabled AD-MSCs to be in close proximity to islets; in step 3, encapsulated islets coated with AD-MSCs were treated with pFUS: here, pFUS enhanced the secretion of insulin from islets as well as stimulated the cytoprotective effect of AD-MSCs. RESULTS: Our approach was shown to prevent islet death and preserve islet functionality in vitro. When 175 syngeneic encapsulated islets coated with AD-MSCs were transplanted beneath the kidney capsule of diabetic mice, and then followed every 3 days with pFUS treatment until day 12 post-transplantation, we saw a significant improvement in islet function with diabetic animals re-establishing glycemic control over the course of our study (i.e., 30 days). In addition, our approach was able to enhance islet engraftment by facilitating their revascularization and reducing inflammation. CONCLUSIONS: This study demonstrates that our clinically translatable three-step approach is able to improve the function and viability of transplanted islets.

Enhancing cell packing in buckyballs by acoustofluidic activation.

How to pack materials into well-defined volumes efficiently has been a longstanding question of interest to physicists, material scientists, and mathematicians as these materials have broad applications ranging from shipping goods in commerce to seeds in agriculture and to spheroids in tissue engineering. How many marbles or gumball candies can you pack into a jar? Although these seem to be idle questions they have been studied for centuries and have recently become of greater interest with their broadening applications in science and medicine. Here, we study a similar problem where we try to pack cells into a spherical porous buckyball structure. The experimental limitations are short of the theoretical maximum packing density due to the microscale of the structures that the cells are being packed into. We show that we can pack more cells into a confined micro-structure (buckyball cage) by employing acoustofluidic activation and their hydrodynamic effect at the bottom of a liquid-carrier chamber compared to randomly dropping cells onto these buckyballs by gravity. Although, in essence, cells would be expected to achieve a higher maximum volume fraction than marbles in a jar, given that they can squeeze and reshape and reorient their structure, the packing density of cells into the spherical buckyball cages are far from this theoretical limit. This is mainly dictated by the experimental limitations of cells washing away as well as being loaded into the chamber.

Soft Ring-Shaped Cellu-Robots with Simultaneous Locomotion in Batches.

Untethered mini-robots can move single cells or aggregates to build complex constructs in confined spaces and may enable various biomedical applications such as regenerative repair in medicine and biosensing in bioengineering. However, a significant challenge is the ability to control multiple microrobots simultaneously in the same space to operate toward a common goal in a distributed operation. A locomotion strategy that can simultaneously guide the formation and operation of multiple robots in response to a common acoustic stimulus is developed. The scaffold-free cellu-robots comprise only highly packed cells and eliminate the influence of supportive materials, making them less cumbersome during locomotion. The ring shape of the cellu-robot contributes to anisotropic cellular interactions which induce radial cellular orientation. Under a single stimulus, several cellu-robots form predetermined complex structures such as bracelet-like ring-chains which transform into a single new living entity through cell-cell interactions, migration or cellular extensions between cellu-robots.