RESUMO
Regular screening of point mutations is of importance to cancer management and treatment selection. Although techniques like next-generation sequencing and digital polymerase chain reaction (PCR) are available, these are lacking in speed, simplicity, and cost-effectiveness. The development of alternative methods that can detect the extremely low concentrations of the target mutation in a fast and cost-effective way presents an analytical and technological challenge. Here, an approach is presented where for the first time an allele-specific PCR (AS-PCR) is combined with a newly developed high fundamental frequency quartz crystal microbalance array as biosensor for the amplification and detection, respectively, of cancer point mutations. Increased sensitivity, compared to fluorescence detection of the AS-PCR amplicons, is achieved through energy dissipation measurement of acoustically "lossy" liposomes binding to surface-anchored dsDNA targets. The method, applied to the screening of BRAF V600E and KRAS G12D mutations in spiked-in samples, was shown to be able to detect 1 mutant copy of genomic DNA in an excess of 104 wild-type molecules, that is, with a mutant allele frequency (MAF) of 0.01%. Moreover, validation of tissue and plasma samples obtained from melanoma, colorectal, and lung cancer patients showed excellent agreement with Sanger sequencing and ddPCR; remarkably, the efficiency of this AS-PCR/acoustic methodology to detect mutations in real samples was demonstrated to be below 1% MAF. The combined high sensitivity and technology-readiness level of the methodology, together with the ability for multiple sample analysis (24 array biochip), cost-effectiveness, and compatibility with routine workflow, make this approach a promising tool for implementation in clinical oncology labs for tissue and liquid biopsy.
Assuntos
Neoplasias , Acústica , Alelos , Humanos , Biópsia Líquida/métodos , Mutação , Neoplasias/diagnóstico , Neoplasias/genética , Reação em Cadeia da Polimerase/métodosRESUMO
Surface plasmon resonance (SPR) and Love wave (LW) surface acoustic wave (SAW) sensors have been established as reliable biosensing technologies for label-free, real-time monitoring of biomolecular interactions. This work reports the development of a combined SPR/LW-SAW platform to facilitate simultaneous optical and acoustic measurements for the investigation of biomolecules binding on a single surface. The system's output provides recordings of two acoustic parameters, phase and amplitude of a Love wave, synchronized with SPR readings. We present the design and manufacturing of a novel experimental set-up employing, in addition to the SPR/LW-SAW device, a 3D-printed plastic holder combined with a PDMS microfluidic cell so that the platform can be used in a flow-through mode. The system was evaluated in a systematic study of the optical and acoustic responses for different surface perturbations, i.e., rigid mass loading (Au deposition), pure viscous loading (glycerol and sucrose solutions) and protein adsorption (BSA). Our results provide the theoretical and experimental basis for future application of the combined system to other biochemical and biophysical studies.
RESUMO
The objective of this work is to present a methodology for the selection of nanoparticles such as liposomes to be used as acoustic probes for the detection of very low concentrations of DNA. Liposomes, applied in the past as mass amplifiers and detected through frequency measurement, are employed in the current work as probes for energy-dissipation enhancement. Because the dissipation signal is related to the structure of the sensed nanoentity, a systematic investigation of the geometrical features of the liposome/DNA complex was carried out. We introduce the parameter of dissipation capacity by which several sizes of liposome and DNA structures were compared with respect to their ability to dissipate acoustic energy at the level of a single molecule/particle. Optimized 200 nm liposomes anchored to a dsDNA chain led to an improvement of the limit of detection (LoD) by 3 orders of magnitude when compared to direct DNA detection, with the new LoD being 1.2 fmol (or 26 fg/µL or 2 pM). Dissipation monitoring was also shown to be 8 times more sensitive than the corresponding frequency response. The high versatility of this new methodology is demonstrated in the detection of genetic biomarkers down to 1-2 target copies in real samples such as blood. This study offers new prospects in acoustic detection with potential use in real-world diagnostics.
Assuntos
Acústica , Técnicas Biossensoriais , DNA/análise , DNA/genética , Sondas de DNA/química , Humanos , Lipossomos/química , Técnicas de Microbalança de Cristal de QuartzoRESUMO
The present study demonstrates the sensitive and label-free acoustic detection of dsDNA amplicons produced from whole Salmonella Thyphimurium cells without employing any DNA extraction and/or purification step, in the presence of the lysed bacterial cells and in a hybridization-free assay. A sample-to-answer assay is also shown during DNA detection directly in milk.
Assuntos
DNA Bacteriano/análise , Leite/química , Salmonella/química , Animais , Leite/microbiologiaRESUMO
The ability to derive information on the conformation of surface attached biomolecules by using simple techniques such as biosensors is currently considered of great importance in the fields of surface science and nanotechnology. Here we present a nanoshape sensitive biosensor where a simple mathematical expression is used to relate acoustic measurements to the geometrical features of a surface-attached biomolecule. The underlying scientific principle is that the acoustic ratio (ΔD/ΔF) is a measure of the hydrodynamic volume of the attached entity, mathematically expressed by its intrinsic viscosity [η]. A methodology is presented in order to produce surfaces with discretely bound biomolecules where their native conformation is maintained. Using DNA anchors we attached a spherical protein (streptavidin) and a rod-shaped DNA (47bp) to a quartz crystal microbalance (QCM) device in a suspended way and predicted correctly through acoustic measurements their conformation, i.e., shape and length. The methodology can be widely applied to draw conclusions on the conformation of any biomolecule or nanoentity upon specific binding on the surface of an acoustic wave device.
Assuntos
DNA/química , Nanopartículas/química , Estreptavidina/química , Sítios de Ligação , Hidrodinâmica , Tamanho da Partícula , Técnicas de Microbalança de Cristal de Quartzo , Propriedades de Superfície , ViscosidadeRESUMO
In this work we provide strong experimental evidence for the hydrodynamic nature of the acoustic wave/biomolecule interaction at a solid/liquid interface. By using a wide range of DNAs of various sizes and by assuming DNA attachment as discrete particles through a neutravidin/biotin link, we prove experimentally that the acoustic ratio (dissipation/frequency) is directly related to the molecules' intrinsic viscosity [η]. The relationship of [η] to the size and shape of biomolecules is described in general and more specifically for linear dsDNA; equations are derived linking the measured acoustic ratio to the number of dsDNA base pairs for two acoustic sensors, the QCM and Love-wave devices operating at a frequency of 35 and 155 MHz, respectively. Single-stranded DNAs were also tested and shown to fit well to the equation derived for the double-stranded molecules while new insight is provided on their conformation on a surface. Other types of DNA are also shown to fit the proposed model. The current work establishes a new way of viewing acoustic sensor data and lays down the groundwork for a surface technique where quantitative information can be obtained at the nanometer scale regarding the shape and size, i.e., conformation of biomolecules at an interface.
Assuntos
Técnicas Biossensoriais/métodos , DNA/análise , Técnicas de Microbalança de Cristal de Quartzo/métodos , Acústica/instrumentação , Avidina/química , Técnicas Biossensoriais/instrumentação , Biotina/química , DNA de Cadeia Simples/análise , Hidrodinâmica , Modelos Moleculares , Técnicas de Microbalança de Cristal de Quartzo/instrumentação , Som , ViscosidadeRESUMO
The sensitivity of QCM-D to molecular hydrodynamic properties is applied in this work to study conformational changes of the intrinsically disordered protein ZipA. Acoustic measurements can clearly follow ZipA's unstructured domain expansion and contraction with salt content and be correlated with changes in the hydrodynamic radius of 1.8 nm or less.
Assuntos
Proteínas de Transporte/química , Proteínas de Ciclo Celular/química , Proteínas de Escherichia coli/química , Proteínas Intrinsicamente Desordenadas/química , Bicamadas Lipídicas/química , Estrutura Terciária de Proteína , Técnicas de Microbalança de Cristal de Quartzo , ViscosidadeRESUMO
Although the scaling theory of polymer solutions has had many successes, this type of argument is deficient when applied to hydrodynamic solution properties. Since the foundation of polymer science, it has been appreciated that measurements of polymer size from diffusivity, sedimentation, and solution viscosity reflect a convolution of effects relating to polymer geometry and the strength of the hydrodynamic interactions within the polymer coil, i.e., "draining." Specifically, when polymers are expanded either by self-excluded volume interactions or inherent chain stiffness, the hydrodynamic interactions within the coil become weaker. This means there is no general relationship between static and hydrodynamic size measurements, e.g., the radius of gyration and the hydrodynamic radius. We study this problem by examining the hydrodynamic properties of duplex DNA in solution over a wide range of molecular masses both by hydrodynamic modeling using a numerical path-integration method and by comparing with extensive experimental observations. We also considered how excluded volume interactions influence the solution properties of DNA and confirm that excluded volume interactions are rather weak in duplex DNA in solution so that the simple worm-like chain model without excluded volume gives a good leading-order description of DNA for molar masses up to 10(7) or 10(8) g/mol or contour lengths between 5 µm and 50 µm. Since draining must also depend on the detailed chain monomer structure, future work aiming to characterize polymers in solution through hydrodynamic measurements will have to more carefully consider the relation between chain molecular structure and hydrodynamic solution properties. In particular, scaling theory is inadequate for quantitative polymer characterization.
Assuntos
DNA/química , Hidrodinâmica , Polímeros/química , Modelos Químicos , Modelos Genéticos , SoluçõesRESUMO
By using an acoustic wave methodology that allows direct sensing of biomolecular conformations, we achieved the detection of multiple target DNAs using a single probe, exploiting the fact that each bound target results in a hybridized product of a different shape.
Assuntos
Acústica/instrumentação , Técnicas Biossensoriais/instrumentação , DNA/análise , MicroRNAs/análise , Hibridização de Ácido Nucleico , Som , Sondas de DNA/química , Conformação de Ácido Nucleico , Técnicas de Microbalança de Cristal de Quartzo/instrumentaçãoRESUMO
The effect of spermine on proton transport across large unilamellar liposomes containing incorporated complexes of the PSII antenna has been studied with the application of a pH-sensitive dye entrapped inside the vesicles. Both monomeric LHCbs and trimeric LHCII increased the permeability of proteoliposomes to protons when in a partly aggregated state within the lipid membrane. We have previously shown that a spermine-induced conformational change in LHCII results in its aggregation and ultimately in the enhancement of excitation energy as heat (qE). In this paper, spermine-induced aggregation of LHCII was found to facilitate proton transport across the proteoliposomes, indicating that a second protective mechanism (other than qE) might exist and might be regulated in vivo by polyamines when photosynthesis is saturated in excess light.
Assuntos
Complexos de Proteínas Captadores de Luz/metabolismo , Prótons , Espermina/metabolismo , Spinacia oleracea/metabolismo , Membrana Celular/metabolismo , Transporte de Íons , Proteolipídeos/metabolismoRESUMO
Surface acoustic wave sensors with integrated microfluidics for multi-sample sensing have been implemented in this work towards the quantitative correlation of the acoustic signal with the molecular weight of surface bound proteins investigating different interaction/binding conditions. The results are presented for: (i) four different biotinylated molecules (30 ≤ Mw ≤ 150 kDa) specifically binding to neutravidin; (ii) the same four non-biotinylated molecules, as well as neutravidin, adsorbing onto gold; and (iii) four cardiac marker proteins (86 ≤ Mw ≤ 540 kDa) specifically binding to their homologous antibodies. Surface plasmon resonance was employed as an independent optical mass sensor. A linear relationship was found to exist between the phase change of the acoustic signal and the molecular weight of the proteins in both cases of specific binding. In contrast, non-specific binding of proteins directly onto gold exhibited no such linear relationship. In all three cases phase change was correlated with the bound mass per area. The underlying mechanism behind the different behavior between specific and non-specific binding is discussed by taking into account the geometrical restrictions imposed by the size of the specific biorecognition molecule and the corresponding bound protein. Our results emphasize the quantitative nature of the phase of the acoustic signal in determining the Mw (in the case of specific binding) with a resolution of 15% and the mass of the bound proteins (in all cases), as well as the significance of the biorecognition molecules in deriving the molecular weight from acoustic or optical detectors.
Assuntos
Técnicas Biossensoriais/instrumentação , Proteínas/química , Acústica/instrumentação , Adsorção , Animais , Anticorpos Imobilizados/química , Avidina/química , Biotinilação , Desenho de Equipamento , Ouro/química , Humanos , Peso Molecular , Proteínas/isolamento & purificação , Ressonância de Plasmônio de Superfície/instrumentaçãoRESUMO
DNA hybridization studies at surfaces normally rely on the detection of mass changes as a result of the addition of the complementary strand. In this work we propose a mass-independent sensing principle based on the quantitative monitoring of the conformation of the immobilized single-strand probe and of the final hybridized product. This is demonstrated by using a label-free acoustic technique, the quartz crystal microbalance (QCM-D), and oligonucleotides of specific sequences which, upon hybridization, result in DNAs of various shapes and sizes. Measurements of the acoustic ratio ΔD/ΔF in combination with a "discrete molecule binding" approach are used to confirm the formation of straight hybridized DNA molecules of specific lengths (21, 75, and 110 base pairs); acoustic results are also used to distinguish between single- and double-stranded molecules as well as between same-mass hybridized products with different shapes, i.e., straight or "Y-shaped". Issues such as the effect of mono- and divalent cations to hybridization and the mechanism of the process (nucleation, kinetics) when it happens on a surface are carefully considered. Finally, this new sensing principle is applied to single-nucleotide polymorphism detection: a DNA hairpin probe hybridized to the p53 target gene gave products of distinct geometrical features depending on the presence or absence of the SNP, both readily distinguishable. Our results suggest that DNA conformation probing with acoustic wave sensors is a much more improved detection method over the popular mass-related, on/off techniques offering higher flexibility in the design of solid-phase hybridization assays.
Assuntos
Acústica/instrumentação , Técnicas Biossensoriais , Conformação de Ácido Nucleico , Hibridização de Ácido Nucleico , Polimorfismo de Nucleotídeo Único/genética , Quartzo/química , Proteína Supressora de Tumor p53/genética , Sondas de DNA , HumanosRESUMO
We measured the intrinsic viscosity of very small synthetic DNA molecules, of 20-395 base pairs, and incorporated them in a nearly complete picture for the whole span of molecular weights reported in the literature to date. A major transition is observed at M approximately 2 × 10(6) . It is found that in the range of approximately 7 × 10(3) ≤ M ≤ 2 × 10(6) , the intrinsic viscosity scales as [η] approximately M(1.05) , suggesting that short DNA chains are not as rigid as generally thought. The corresponding scaling for the range of 2 × 10(6) ≤ M ≤ 8 × 10(10) is [η] approximately M(0.69) . A comparison of our results with existing equations, for much narrower data distributions, is made, and the agreement is very satisfactory considering the huge range of data analyzed here. Experimental concerns such as the effect of ionic strength, polydispersity, temperature, and shear rate are discussed in detail. Some issues concerning the Huggins coefficient, polymer chain stiffness, and the relationship between the Mark-Houwink constants K, α are also presented; it is found that log K = 1.156 - 6.19α.
Assuntos
Biofísica/métodos , DNA/química , Sequência de Bases , Simulação por Computador , Modelos Biológicos , Dados de Sequência Molecular , Peso Molecular , Plasmídeos/metabolismo , Polímeros/química , Solventes , Estresse Mecânico , Temperatura , ViscosidadeRESUMO
A novel biophysical approach in combination with an acoustic device is demonstrated as a sensitive, rapid, and label-free technique for characterizing various structures of the DNA Holliday Junction (J1) nanoswitch. We were successful in discriminating the "closed" from the "open" state, as well as confirming that the digestion of the J1 junction resulted in the two, anticipated, rod-shaped, 20 bp long fragments. Furthermore, we propose a possible structure for the â¼10 nm long (DNA58) component participating in the J1 assembly. This work reveals the potential of acoustic devices as a powerful tool for molecular conformation studies.
Assuntos
Acústica , DNA Cruciforme/química , Nanoestruturas , Técnicas Biossensoriais , Conformação de Ácido NucleicoRESUMO
We have studied the formation of histone Hv1-DNA complexes using an acoustic biosensor and AFM imaging. Our results show that DNA and histone molecules aggregate into amorphous accumulations which form a compact rigid layer on the sensor's surface. By measuring changes in the acoustic wave amplitude, it was possible to titrate surface bound DNA with Hv1 and discriminate between DNA molecules of different size and shape. From the kinetic analysis of real time data, Keq was found equal to 3x10(5) M(-1).
Assuntos
Acústica , Técnicas Biossensoriais , DNA/química , DNA/metabolismo , Histonas/química , Histonas/metabolismo , Animais , Microscopia de Força Atômica , Ligação Proteica , Tetrahymena thermophilaRESUMO
Two different types of acoustic sensors, a surface acoustic wave device supporting a Love-wave (Love-SAW) and a quartz crystal microbalance system with dissipation (QCM-D), were used to demonstrate the potential of acoustic devices to probe the binding of a cell membrane receptor to an immobilized ligand. The class I Major Histocompatibility Complex molecule HLA-A2 on the surface of whole cells and anti-HLA monoclonal antibodies immobilized on the sensor were used as an interaction pair. Acoustic measurements consisted of recording the energy and velocity or frequency of the acoustic wave. Results showed that both devices could detect the number of cells in solution as well as the cells bound to the surface. In addition, the Love-wave sensor, which can sense binding events within the relatively short distance of approximately 50 nm from the device surface, was sensitive to the number of bonds formed between the cell membrane and the device surface while the QCM-D, which can sense deeper within the liquid, was found to respond well to stimuli that affected the cell membrane rigidity (cytochalasin D treatment). The above results suggest that acoustic biosensors can be a powerful tool in the study of cell/substrate interactions and acoustic devices of different type can be used in a complementary way.
Assuntos
Acústica/instrumentação , Bioensaio/instrumentação , Técnicas Biossensoriais/instrumentação , Membrana Celular/metabolismo , Técnicas de Sonda Molecular/instrumentação , Mapeamento de Interação de Proteínas/instrumentação , Receptores de Superfície Celular/metabolismo , Técnicas Biossensoriais/métodos , Desenho de Equipamento , Análise de Falha de Equipamento , Ligantes , Ligação Proteica , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
Acoustic sensors probe the response of a thin layer to the mechanical displacement associated with an acoustic wave. Acoustic measurements provide two simultaneous time-resolved signals; one signal is related to the velocity or frequency of the acoustic wave and is mainly a function of adsorbed mass, while the second signal, related to the oscillation amplitude, is associated with energy dissipation and is a function of the viscoelastic properties of the adsorbed layer. The methods described in this chapter explore the relationship between the acoustic measurements of adsorbed liposomes and the mechanical properties of the lipid bilayer. This is carried out using a well-characterized model system consisting of liposomes prepared from an unsaturated phospholipid and a range of mole fractions of cholesterol. Real-time acoustic measurements are shown to be sensitive to changes in the liposome cholesterol content, regardless of the mode of attachment of the liposome to the device surface. This sensitivity is not due to changes in the density of the bilayer, or to changes in the extent of liposome-surface interactions, thus leaving the mechanical properties of the bilayer as the feature that is probably being measured. Some mechanisms by which the acoustic response could be generated are suggested in this chapter.
Assuntos
Acústica , Adsorção , Colesterol/química , Lipossomos , Ressonância de Plasmônio de Superfície , beta-Ciclodextrinas/químicaRESUMO
The development of sensors for detecting the conformation of surface-attached molecules is an emerging field with significance in the pharmaceutical industry and in drug design. In this work, triplex-forming oligos (TFOs), a separate class of non-natural DNA bending agents that can affect the mechanical properties of DNA through the formation of triple-helical structures of specific conformation and/or flexibility, are used as a model system in combination with an acoustic biosensor to determine molecular geometrical features. In practice, the degree of bending of a specific DNA target caused by a particular TFO was evaluated by measuring the ratio of acoustic energy change over phase change observed during the binding of pre-formed triplex DNA molecules to the device surface. The DNA bending angle derived via acoustic measurements is in excellent agreement with previously reported values using molecular biology techniques. The reported acoustic technique appears quite appealing for the biophysical study of DNA molecules providing rapid qualitative and quantitative information, at the same time holding promise to be developed as a high-throughput method for the evaluation of DNA conformational changes.
Assuntos
Acústica/instrumentação , Técnicas Biossensoriais/instrumentação , Cristalografia/métodos , DNA/química , DNA/ultraestrutura , Transdutores , Desenho de Equipamento , Análise de Falha de Equipamento , Conformação de Ácido NucleicoRESUMO
Direct biosensors are devices operating by monitoring the amount of surface-bound analyte. In this work a new approach is presented where a label-free acoustic biosensor, based on a QCM-D device, and solution viscosity theory, are used to study DNA intrinsic viscosity. The latter is quantitatively related to the DNA conformation and specifically the molecule's shape and size, in a manner that is independent of the amount of bound DNA mass. It is shown that acoustic measurements can clearly distinguish between ds-DNA of same shape (straight rod) but various sizes (from 20 to 198bp (base pairs)) and same mass and size (90bp) but various shapes ("straight", "bent", "triangle"). These results are discussed in the broader context of "coil" and sphere-like molecules detected on surfaces. A mathematical formula is presented relating the length of straight, surface-protruding DNA to the acoustic ratio DeltaD/Deltaf. The development of real-time rapid techniques for the characterization of DNA intrinsic curvature as well as DNA conformational changes upon interaction with proteins is of significance to analytical biotechnology due to the large number of DNA sequences and potential DNA bending proteins involved in genome analysis and drug screening.
Assuntos
Acústica/instrumentação , Técnicas Biossensoriais/instrumentação , DNA/química , DNA/ultraestrutura , Sistemas Microeletromecânicos/instrumentação , Conformação de Ácido Nucleico , ViscosidadeRESUMO
Acoustic devices were employed to characterize variations in the mechanical properties (density and viscoelasticity) of liposomes composed of 1-oleoyl-2-palmitoyl- sn-glycero-3-phosphocholine (POPC) and cholesterol. Liposome properties were modified in three ways. In some experiments, the POPC/cholesterol ratio was varied prior to deposition on the device surface. Alternatively, the ratio was changed in situ via either insertion of cholesterol or removal of cholesterol with beta-cyclodextrin. This was done for liposomes adsorbed directly on the device surface and for liposomes attached via a biotin-terminated poly(ethylene glycol) linker. The acoustic measurements make use of two simultaneous time-resolved signals: one signal is related to the velocity of the acoustic wave, while the second is related to dissipation of acoustic energy. Together, they provide information not only about the mass (or density) of the probed medium but also about its viscoelastic properties. The cholesterol-induced increase in the surface density of the lipid bilayer was indeed observed in the acoustic data, but the resulting change in signal was larger than expected from the change in surface density. In addition, increasing the bilayer resistance to stretching was found to lead to a greater dissipation of the acoustic energy. The acoustic response is assessed in terms of the possible distortions of the liposomes and the known effects of cholesterol on the mechanical properties of the lipid bilayer that encloses the aqueous core of the liposome. To aid the interpretation of the acoustic response, it is discussed how the above changes in the lipid bilayer will affect the effective viscoelastic properties of the entire liposome/solvent film on the scale of the acoustic wavelength. It was found that the acoustic device is very sensitive to the mechanical properties of lipid vesicles; the response of the acoustic device is explained, and the basic underlying mechanisms of interaction are identified.